M ICRO TIG WE L DING

PAxxP
Programmable Pulsed Arc
Power Supplies
The PAxxP range of programmable pulsed arc power
supplies are linear DC precision arc-welding units
extensively used in contactless, high speed solder free coil
and wire termination industries. Available for single output
laboratory use or multi output high speed automation
applications alike, these units employ state of the art
closed loop electronic arc control circuitry to deliver output
accuracies and repeatability better than 1% with currents
up to 100 amps.
Welding currents and profiles are fully programmable with
real time graphical oscilloscope feedback that provides
process monitoring and quality assurance Pass/Fail criteria
as standard.

KEY FEATURES TYPICAL APPLICATIONS

All PAxxP series products feature:
• Colour Touch Screen with graphical weld tracing
• Constant Current Arc control to within 1% accuracy
• Single or Double Pulse outputs
• Simple to use, intuitive touch key menu.
• Compact, high performance and low cost Connector pin termination Micro wire pin connections

• Single phase 115VAC or 230VAC operation

• The 100 Amp unit is three phase 380 / 480VAC

One, two or four output variants with 20 to 100 amp outputs

+ options for gas
Micro wire pin termination TIG ball & wire combination

Zero contact coil termination

1/4
 PAXXP PRODUCT FEATURES
M ICRO TIG WE L DING

• Intuitive Colour Touch Screen • Weld Voltage high and low limit checking
• Isolated RS232 port for PC or PLC programming • Weld Energy high and low limit checking
• Isolated I/O port (37 way D type) Including trigger faults • Built in weld counter
Automation Interface • Single or Double pulse option
• One, Two and Four output options for automatic multiple • Graph of Voltage for last weld
welding • Graph of energy trend against time
• I/O, Configuration and Calibration screens • Fully programmable, Upslope, peak and downslope
• 99 memory locations for either single or double pulse • Output ripple less than 1%
weld profiles
• Output current accuracy within 1%

PRODUCT FEATURE SET

The PAxxP range are available as single, double or four output units.
Single output variants are commonly supplied for laboratory use or single torch volume manufacture in 20, 40, 60 or 100
Amp output configuration. These units also provide options for programmable gas shield control.
Multi-output variants are commonly used in multi weld high speed automation applications such as multiple coil terminations
and lamp manufacture. These variants provide an offline single profile setup mode along with a multiple output run mode
screen, showing up to four concurrent outputs.
SWM Smart Weld Monitors deliver highly cost effective real time quality control measures and facilities to mature production
line equipment. Touch panel PC setup and monitoring provides intuitive multi channel process window capture and checking
together with built in SPC and trend analysis features.

Programming screens provide 99 stored profiles, each graphically Energy trend plots indicate process performance
programmable via the colour touch screen. and electrode life over time

Automation interfacing is simplified with an intuitive A graphical input/output monitor provides simple setup
programmable timing interface. vof diagnosis of automation connections.

2/4
 M ICRO TIG WE L DING
PROGRAMMABLE PULSED ARC - APPLICATIONS
Pulsed arc welding is commonly used for zero contact, high speed solder free coil and wire termination applications. It may
also be used in common wire joining applications such as thermocouple wire joining or where there is a requirement to
consolidate component leads or stranded wire through melting. The entire process is electronically controlled and as such,
provides a very high speed method of melting and joining wires and wire leads and therefore is well suited to high speed
mass manufacturing processes.
Typically process times are less than 100ms and require no flux or pre-treatment. The process is initiated with a high voltage
arc setup up between the welding torch and the component. This ionises the gap between the two allowing current to pass.
The instant current begins flowing, voltage is reduced and current flow becomes servo controlled in accordance with a
programmable weld profile. The weld profile provides ramp up, peak and ramp down functions which provide control over
the heating effect during welding.

WIRE TO PIN TERMINATIONS

Insulated wire is wrapped around a terminal pin. As welding begins, the
pin heats and begins to burn back, forming a ball which melts, joins and
encapsulates the wire against the pin. The process is effective to remove
insulation grades up to 180°C.

Insulated wire wrapped around a terminal pin

STRANDED WIRE CONSOLIDATION

In some applications it is useful to consolidate wire strands in order to form
a solid mass. Typically additional processes such as DC resistance welding
are then used to weld the consolidated material to other materials or
components forming highly reliable solder free joints.
Wire balling techniques such as this maybe used for ultra small micro joints
with wire sizes down to 30µm.

OTHER APPLICATIONS Stranded wire consolidation

Other pulsed micro arc welding applications include wire to wire and wire
to component joining. Typical examples include thermocouple wire to wire joining and lamp manufacture, joining wires and
contact areas.
Pulsed micro arc welding finds application in many diverse industries. With solder free legislation in place, manufacturers
are commonly turning to welding techniques to solve their joining problems, often discovering additional benefits through
reduced pre and post processing, higher integrity joints and faster process times.
MacGregor Welding Systems have been designing and supplying micro arc products for over 40 years and are always
pleased to discuss potential applications.

3/4
 M ICRO TIG WE L DING
TECHNICAL SPECIFICATIONS
Model PA20 PA40 PA60 PA100
Maximum Output Current 20 Amps DC 40 Amps DC 60 Amps DC 100 Amps DC
Duty Cycle 5% @ 20A 5% @ 40A 5% @ 60A 5% @ 100A
Open circuit voltage 80VDC 60VDC 60VDC 45VDC
Options 1 output 1 output
1,2 or 4 outputs 1 or 2 outputs
Multi output on request Multi output on request
Mains Supply 50/60Hz 110V/230VAC +/-15% 110V/230VAC +/-15% 110V/230VAC +/-15% 380 / 415 / 460VAC 3 phase
Up Slope Time (0.1 ms steps) 0.1 - 99.9 ms 0.1 - 99.9 ms 0.1 - 99.9 ms 0.1 - 99.9 ms
Peak Weld Time (0.1ms steps) 0.1 - 999.9 ms 0.1 - 999.9 ms 0.1 - 999.9 ms 0.1 - 999.9 ms
Down Slope Time (0.1ms steps) 0.1 - 999.9 ms 0.1 - 999.9 ms 0.1 - 999.9 ms 0.1 - 999.9 ms
2nd Pulse Weld Delay Time 1 - 999 ms 1 - 999 ms 1 - 999 ms 1 - 999 ms
Cooling (overheat protected) Fan Fan Fan Fan
Max Gas Pressure 1 Bar - Single Output 1 Bar - Single Output 1 Bar - Single Output 1 Bar - Single Output
Gas pre/purge timing Programmable Programmable Programmable Programmable

WEIGHT & DIMENSIONS

Model PA20 PA40 PA60 PA100
Dimensions (D x W x H) 490 x 270 x 300mm 490 x 270 x 300mm 490 x 270 x 300mm 445 x 560 x 220mm
Weight 38 kg 38 kg 38 kg 42 kg

Lindberghstrasse 1 • DE-82178 Puchheim, Germany

T: +49 (0) 89 83 94 030 • Fax : +49 (0) 89 839403 68
[email protected] • www.amadamiyachi.eu
ISO 9001 Certified Company

EUROPE AMERICAS ASIA

Amada Miyachi Europe BV Amada Miyachi Europe Amada Miyachi America Inc. Amada Miyachi Co., Ltd. Amada Miyachi Amada Miyachi Amada Miyachi
Helmond, The Netherlands Tremblay-en-France, France Monrovia, CA, USA Noda, Japan Korea Co., Ltd. (Thailand) Co., Ltd. India Pvt., Ltd.
McG-Ama-01_PAxxP Series MicroTIG

T: +31 (0) 492 542 225 T: +33 (0) 149 903 000 T: +1-626-303-5676 T: +81-4-7125-6177 Gyeonggi-do, Korea Samutprakarn, Thailand Bangalore, Kalyan Nager
[email protected] [email protected] [email protected] [email protected] T: +82-31-8015-6810 T: +66 (0) 2-170-5977 T: +91-80-4092-1749
[email protected] [email protected] [email protected]
Amada Miyachi Europe Kft. Amada Miyachi Europe Amada Miyachi do Amada Miyachi
Budapest, Hungary Torino, Italy Brasil Ltda. Shanghai, Co., Ltd. Amada Miyachi Amada Vietnam Co., Ltd.
T: +36 1 431 9927 T: +39 011 223 83 16 Sao Paulo, Brasil Shanghai, China Taiwan Co., Ltd. Ha Noi, Vietnam
[email protected] [email protected] T: +55-11-4193-1187 T: +86-21-6448-6000 Taipei, Taiwan R.O.C. T: +84-4-6261-4583
[email protected] [email protected] T: 886-2-2397-4778
Amada Miyachi Europe Amada Miyachi Europe [email protected]
Mildenhall, United Kingdom Prague-West, Czech Republic follow us on:
T: +44 (0) 1638 510 011 T: +420 251 512 157 All data, images and text are subject to change at any time. Amada Miyachi Europe GmbH reserves the right to change, modify, delete
[email protected] [email protected] and add technical specifications and product details at any time without prior notification. © 2017 Amada Miyachi Europe GmbH.

4/4