Smartcard MCU With 32-Bit ARM Cortex™ M3 CPU and 416 Kbytes High Density Flash Memory

ST32F416
Smartcard MCU with 32-bit ARM Cortex™ M3 CPU

and 416 Kbytes high density Flash memory
Data Brief
Features
ST32F416 major applications include:
■ Mobile communications (GSM, 3G and CDMA)
■ Java Card™ applications
Hardware features 259a.ai
■ ARM Cortex™-M3 32-bit RISC core Micromodule Wafer

■ 12 Kbytes User RAM
■ 416 Kbytes User Flash memory with OTP area: Security features
– 10-year data retention ■ Monitoring of environmental parameters
– 100,000 Erase/Write cycles ■ Protection against faults
– Page granularity of 128 Bytes ■ ISO 3309 CRC calculation block
– Block granularity: 1 Kbyte
■ True Random Number Generator
– 128 Bytes of OTP for User
■ Unique serial number on each die
– Page Erase time 3 ms
– Block Erase 1 Kbyte in 15 ms ■ Hardware DES accelerator
– Programming performance up to 10µs/byte
Software features
– Flash Erase / Write Protection software
programmable on 64 Kbyte Sectors ■ Flash Loader
■ Asynchronous Receiver Transmitter ■ Flash drivers
supporting ISO 7816-3 T=0 and T=1 protocols
Development environment
■ Two 16-bit timers with interrupt capability
■ 1.8V, 3V and 5V supply voltage ranges Software development and firmware generation
are supported by a comprehensive set of
■ External clock frequency from 1 up to 7.5 MHz development tools dedicated to software design
■ High performance provided by: and validation:
– CPU clock frequency up to 20 MHz ■ C Compiler
– External clock multiplier (2x, 3x, and 4x) ■ Simulator
■ Current consumption compatible with GSM ■ Emulator
and ETSI specifications
■ Power-saving Standby state
■ Contact assignment compatible ISO 7816-2
■ ESD protection greater than 4 kV (HBM)
September 2008 Rev 1 1/4

For further information contact your local STMicroelectronics sales office. www.st.com 1
Description ST32F416
1 Description
1.1 Hardware description

The ST32F416 is a serial access microcontroller designed for secure mobile applications
that incorporates the most recent generation of ARM processors for embedded systems. Its
Cortex™-M3 32-bit RISC core operating at a 20-MHz frequency brings great performance
and excellent code compacity to the application thanks to the Thumb®-2 instruction set.
The high-speed embedded Flash 416 Kbyte memory introduces more flexibility to the
system.
The ST32F416 also offers a serial communication interface fully compatible with the ISO
7816-3 standard (T=0, T=1) for smartcard applications.
Two general purpose 16-bit timers are available.
A hardware Data Encryption Standard (DES) accelerator can be used to the user to
optimize the application performance. A software library is provided for Advanced
Encryption Standard (AES) implementation.
The ST32F family operates in the –25 to +85°C temperature range and 1.8V, 3V and 5V
supply voltage ranges. A comprehensive range of power-saving modes enables the design
of efficient low-power applications.
Figure 1. ST32F416 block diagram
Flash DES
RAM ST ROM
memory Accelerator
ST ROM
Firewall
Internal Bus
True Cortex™
Clock Random
2x Security M3
CRC Gene-
16-bit Adminis- Number CPU IART
Module rator
Timers trator Gene- Core
Module rator
CLK RESET Vcc GND I/O

Ai12577
2/4
ST32F416 Revision history
1.2 Software development tools description

Dedicated Cortex™-M3 software development tools are provided by ARM and Keil. This
includes the Instruction Set Simulator (ISS) and C compiler. The documentation is available
on the ARM and Keil web sites.
Moreover, STMicroelectronics provides:
● A time-accurate hardare emulator controlled by the Keil debugger and the ST
development environment.
● A complete product simulator based on Keil’s ISS simulator for the Cortex™-M3 CPU.
● A ROMed Flash Loader with very high-speed software downloading capabilities.
2 Revision history
Table 1. Document revision history

Date Revision Changes
19-Sep-2008 1 Initial release.
3/4
ST32F416
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved

BULL CP8 Patents
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4

Smartcard MCU With 32-Bit ARM Cortex™ M3 CPU and 416 Kbytes High Density Flash Memory

Uploaded by

Copyright:

Available Formats

Smartcard MCU With 32-Bit ARM Cortex™ M3 CPU and 416 Kbytes High Density Flash Memory

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Smartcard MCU With 32-Bit ARM Cortex™ M3 CPU and 416 Kbytes High Density Flash Memory

Uploaded by

Copyright:

Available Formats

ST32F416

Smartcard MCU with 32-bit ARM Cortex™ M3 CPU

Hardware features 259a.ai

■ ARM Cortex™-M3 32-bit RISC core Micromodule Wafer

September 2008 Rev 1 1/4

1.1 Hardware description

Figure 1. ST32F416 block diagram

CLK RESET Vcc GND I/O

1.2 Software development tools description

Table 1. Document revision history

19-Sep-2008 1 Initial release.

Please Read Carefully:

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

© 2008 STMicroelectronics - All rights reserved

You might also like