Scribd
Upload
7 views

Tutorial CAD3D2019 Arduino

1. Create an assembly model with an Arduino Uno board and HC-SR04 distance sensor. Create a new box component and rename it to "Box". Add a 5mm offset plane to the front plane of the box. 2. Create a sketch on the offset plane and extrude a rectangle to build the box shape. Extrude the shape 40mm and add a 1.6mm shell thickness. 3. Make holes on the sensor side and Arduino connections side of the box to complete the assembly model.

Uploaded by

Josué Mendes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Tutorial CAD3D2019 Arduino

1. Create an assembly model with an Arduino Uno board and HC-SR04 distance sensor. Create a new box component and rename it to "Box". Add a 5mm offset plane to the front plane of the box. 2. Create a sketch on the offset plane and extrude a rectangle to build the box shape. Extrude the shape 40mm and add a 1.6mm shell thickness. 3. Make holes on the sensor side and Arduino connections side of the box to complete the assembly model.

Uploaded by

Josué Mendes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

DMG I 2019/20 CAD Tutorials

Tutorial CAD3D 2019 – Practical Example


Name:________________________________________ Student Nº:___________ Course:__________
Name:________________________________________ Student Nº:___________ Course:__________
1 – (SolidWorks) Make a computer folder with your name and number, where you save your work in this exercise.
Crie uma pasta com o seu nome e número no computador, onde deverá guardar todos os ficheiros que criar para
este exercício.

1.1-Create an assembly model with Arduino Uno board and the HC-SR04 distance sensor.

Create a new component (box)

Click on Front Plane. This plane will be the base plane for the new part.

1
DMG I 2019/20 CAD Tutorials

A new part is cretaed on the left. Rename it (File -> Save as, press Ok on the warning dialog window) to Box. Close
the empty sketch (click on “Discard Changes and Exit” button).

Click on the Front Plane of Box part. On the Features tab click on Reference Geometry button and select Plane.

2
DMG I 2019/20 CAD Tutorials

Select “Flip offset” check box and change the offset distance to 5mm.

Click on “Plane1” and select the sketch button.

3
DMG I 2019/20 CAD Tutorials

Press Ctrl+8 and create a rectangle with the dimensions shown.

Build the box. Extrude with 40mm. Make a shell with a 1.6 mm thickness.

4
DMG I 2019/20 CAD Tutorials

Make the holes on the sensor side and on the Arduino connections side.

You might also like