Scribd
Upload
16 views

LCS Lab 5

The document describes a lab session on modeling and simulating a magnetic levitation system. It introduces the GML control system and applications of magnetic levitation. It then describes the components of a maglev station including an electromagnetic coil, metal sphere, sensors, and controller. Students are tasked with developing a Simulink model of the system using a transfer function block, simulating the step response, and comparing it to a MATLAB script simulation.

Uploaded by

obaid ur rehman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

LCS Lab 5

The document describes a lab session on modeling and simulating a magnetic levitation system. It introduces the GML control system and applications of magnetic levitation. It then describes the components of a maglev station including an electromagnetic coil, metal sphere, sensors, and controller. Students are tasked with developing a Simulink model of the system using a transfer function block, simulating the step response, and comparing it to a MATLAB script simulation.

Uploaded by

obaid ur rehman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

LAB SESSION 05

MAGNETIC LEVITATION SYSTEM


MODEL AND ANALYSIS

OBJECTIVES:
 Introduction of GML ( Googol Magnetic Levitation) Control System and Applications
 System Modeling of Magnetic Levitation
 MATLAB Simulink Simulation

THEORY:
OVERVIEW OF MAGNETIC LEVITATION SYSTEM WITH DIAGRAM:

The Maglev station consist of an electromagnetic coil, a metal sphere, op‐amp based analogue
controller unit with changeable elements, a built‐in current‐voltage converter/driver and several
connection nodes to achieve external connections with DAQ equipment. Station, itself can be
operated with the suitable RC network configurations placed on op‐amp connection nodes
without using a DAQ connected to a computer, this type of operation will be called “standalone
operation” .

Description of Elements

Name Description
Coil The coil generates and applies the electromagnetic force to the sphere in
the opposite direction to gravity.
Heat Sink Heat Sink prevents the coil from damages caused by the temperature
created by the copper loss in the windings.
Metal Sphere Metal Sphere is made of stainless steel, its diameter is 25 mm and it has
a weight of 20 grams.
IR Detectors IR Detectors is designed to measure the distance between the zero‐point
and the sphere.
Set Point This potentiometer adjusts the desired set‐point value of the sphere
when the system used in standalone mode.
Disturbance In This input can be used to examine the effect of the disturbances over
the controller.
Measured Value This node gives the inverted value of the measured sphere position in
volts (To calculate the real position in meters; a linear conversion is
needed.)

Gain The gain potentiometer adjusts the overall gain of the controller when the
system used in standalone mode.
Control Output Control Output is the output of the built‐in controller; in standalone
mode it is directly connected to drive input.
Drive Input Drive input converts the given voltage level to the current level applied
to the coil windings. (It has a constant convert ratio between voltage
and current)

Magnetic Levitation System

MAGNETIC LEVITATION APPLICATIONS IN REAL LIFE

 Transportation engineering (magnetically levitated trains, flying cars, or personal


rapid transit (PRT), etc.)
 Environmental engineering (small and huge wind turbines: at home, office, industry,
etc.)
 Aerospace engineering (spacecraft, rocket, etc.)
 Military weapons engineering (rocket, gun, etc.),
 Nuclear engineering (the centrifuge of nuclear reactor),
 Civil engineering including building facilities and air conditioning systems
(magnetic bearing, elevator, lift, fan, compressor, chiller, pump, gas pump,
geothermal heat pumps, etc.),
 Biomedical engineering (heart pump, etc.),
 Chemical engineering (analyzing foods and beverages, etc.),
 Electrical engineering (magnet, etc.),
 Architectural engineering and interior design engineering including household and
administrative appliances (lamp, chair, sofa, bed, washing machine, room, toys
(train, levitating spacemen over the space ship, etc.), stationery (pen), etc.),
 Automotive engineering (car, etc.),
 Advertising engineering.

LAB TASKS:

1. Develop a Simulink model for magnetic levitation system


Solution:
Output:

2. Select transfer function block from continuous block library.


.
3. Transfer function is
. .
4. Change the block name to GML transfer function
5. Change the color of the block
6. Drag step block from the sources block
7. Drag the scope from sinks
8. Connect all the blocks
9. Plot the step response and record the plot generated
Solution:

Output:

10. Write Matlab script for the system and calculate responses and then compare.

num = [77.8421];
den = [0.0311 0 -30.5250];
G = tf(num,den)
Fs = 1e4;
Ts = 1/Fs;
t = 0:Ts:5;
x = zeros(size(t));
% But make everything corresponding to t>=0 one:
x(t>=0) = 1;
y = lsim(G,x,t);
subplot(211)
plot(t,x,'linewidth',2);
title('Input')
xlabel('Time(sec)')
ylabel('Amplitude')
grid on
subplot(212)
plot(t,y,'linewidth',2);
title('Output')
xlabel('Time(sec)')
ylabel('Amplitude')
grid on

Output:
CONCLUSION AND COMMENTS:

__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________

You might also like