FlexTrack Specifications Sheet 01

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Technical

Specifications

FlexTrackTM
Highly Flexible Aerospace Inspection Scanner
COMPOSITE INSPECTION WITHOUT COMPROMISE,
VERSATILE AUTOMATED XY SCANNER
The FlexTrack scanner comprises of a motorized actuator installed on a module
that moves on a flexible track. It allows for raster scanning in both directions with
the arm being the scan axis and the track the index axis, and vice versa.

The probe is installed on a suspension and can be oriented parallel


or perpendicular to the arm. The arm can be removed from the
track displacement module for transportation, storage, and
installation on components.
The scanner is provided with one or two flexible tracks. The
tracks can be linked together creating an infinite track while
scanning; when the scanner is on the next track, the first one can
be disconnected and placed in front of the scanner. The tracks
feature vacuum cups so they can be put on a composite surface,
for example. Each cup has an independent Venturi system so
if one or a few cups do not have a full seal, it won’t affect the
remaining suction cups.

Highly Flexible Optimal Design


x Parallel or perpendicular probe orientation. x Easy arm removal. (track module displacement, storage,
installation on components)
x Two flexible tracks included. (can be linked together to create
an infinite track while scanning) x Eight independent suction cups per track and strong enough
to support the scanner overhang position.
Automated
x Motorized 609-mm (24-in) stroke actuator moving on a
flexible track.

eddyfi.com/flextrack
SPECIFICATIONS
INSTRUMENT

Maximum recommended speed for arm axis (#1) 100 mm/s (4 in/s)

Maximum recommended speed for track axis (#2) 25 mm/s (1 in/s)

Maximum stroke on the arm axis (#1) 810 mm (32 in)

Maximum usable stroke on the arm axis (#1) (when installed


610 mm (24 in)
on the track)

Probe suspension maximum stroke 180 mm (7.2 in)

Suction cup material Polyurethane (PU40)

Suction cup dimensions 59 mm x 154 mm (2.32 in X 6.06 in)

Track length 1370 mm (54 in)

Track width 145 mm (5.7 in)

Arm total length 1039 mm (40.9 in)

Motor cable length 13.7 m (45 ft)

Couplant and air tube length 13.7 m (45 ft)

Air pressure required for suction cups 5.5 bar (80 psi)

Maximum radius of curvature of track 2540 mm (100 in)

Motor maximum allowed current 2A

Scanner arm weight 4.67 kg (10.3 lb)

Track weight 5.49 kg (12.1 lb)

Track and motorized module weight 8.12 kg (17.9 lb)

Cables weight 2.58 kg (5.7 lb)

2022-06

The information in this document is accurate as of its publication. Actual products may differ from those presented herein.
© 2022 Eddyfi Canada, Inc. Eddyfi Technologies, Eddyfi, Zetec, FlexTrack, TOPAZ, UltraVision and their associated logos are
trademarks or registered trademarks of Eddyfi Technologies (wholly owned subsidiary of Eddyfi Canada, Inc.) in Canada and/
or other countries. Eddyfi Technologies reserves the right to change product offerings and specifications without notice.

www.eddyfi.com [email protected]

You might also like