Scribd
Upload
17 views4 pages

Slyu 043 C

Uploaded by

Ali Younis69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views4 pages

Slyu 043 C

Uploaded by

Ali Younis69
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

www.ti.

com

User’s Guide
HALL-ADAPTER-EVM

ABSTRACT

SLYU043C – APRIL 2020 – REVISED OCTOBER 2021 HALL-ADAPTER-EVM 1


Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
www.ti.com

The HALL-ADAPTER-EVM simplifies prototyping SMT ICs:


The HALL-ADAPTER-EVM supports SOT23-3 (DBZ), TO-92 (LPG), X2SON
(DMR), SOT23-5/6 (DBV), DSBGA (YBH) and MSOP-8 (DGK) packages.

Usage Instructions:

Step 1: Solder IC(s) to adapter PCB. Also solder any necessary decoupling capacitor needed
for the device. Refer to the device data sheet for appropriate decoupling capacitor values. ICs
may be hand-soldered or attached with IR or hot air reflow techniques.

Step 2: Use long nose pliers to snap terminal strips (Samtec part number TSW-124-07-L-S)
into 4 position lengths.

2 HALL-ADAPTER-EVM SLYU043C – APRIL 2020 – REVISED OCTOBER 2021


Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
www.ti.com Revision History

Step 3: Gently flex panel at score lines to separate boards.

Step 4: Insert terminal strips into a breadboard or spare DIP socket to align pins.

Step 5: Position board over pins and solder the connections. Carefully remove from
breadboard or DIP socket and complete.

1 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision B (July 2021) to Revision C (October 2021) Page
• Changed Step 1 of the HALL-ADAPTER-EVM Usage Instructions ...................................................................1

Changes from Revision A (April 2020) to Revision B (July 2021) Page


• Updated the numbering format for tables, figures and cross-references throughout the document...................1

Changes from Revision * (November 2017) to Revision A (April 2020) Page


• Changed Usage Instructions format to follow other ADAPTER-EVM guides..................................................... 1

SLYU043C – APRIL 2020 – REVISED OCTOBER 2021 HALL-ADAPTER-EVM 3


Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated

You might also like