PRODUCT GUIDE

A7
amplifiers

4 CHANNEL FEATURES: MONO FEATURES:

• 2Ω Stereo Capability • 1Ω Mono Capability
• Continuously Variable Low level RCA Inputs • Continuously Variable Low level RCA Inputs
• DRIVESINK Heat Management System • DRIVESINK Heat Management System
• Independent 18dB per Octave High Pass and Low Pass X-Over Network • Continuously Variable 24dB per Octave Low Pass X-Over
• Continuously Variable Bass Boost @ 45Hz • Continuously Variable 24 dB Per Octave Subsonic Filter
• Internal Multi-Link Module For Easy Multi-Linking of Two Like Amplifiers • Variable Phase Shift Control (0-180)
• Unregulated DC-DC PWM Power Supply • Continuously Variable Bass Boost @ 45Hz
• Speaker Short Circuit Protection • Internal Multi-Link Module For Easy Multi-Linking of Two Like Amplifiers
• RCA Pre-Amp Outputs for Easy Daisy Chaining of Multiple Amplifiers • Unregulated DC-DC PWM Power Supply
• Large Gauge Power Input Terminals • Speaker Short Circuit Protection
• RCA Pre-Amp Outputs for Easy Daisy Chaining of Multiple Amplifiers
• Large Gauge Power Input Terminals
• Bass Remote Included

* Bass Remote Included

(All Mono Models)

10.25in / 260mm
2.20in / 60mm

CONTACT US: (877) 787-011

TM
2 www.dbdrive.net
 PRODUCT GUIDE
A7
amplifiers

* Bass Remote Included

A7 125.4 *A7 2500.1 *A7 3500H.1 *A7 5000H.1

• Internal Circuitry 4 Ch. Class AB Class D Mono Class D Mono Class D Mono

• 4Ω @ 14.4 Volts 4 x 250 W / 2 x 350 W 1 x 750W 1 x 900W 1 x 1250W

• 2Ω @ 14.4 Volts 4x125 Watts 1 x 1250W 1 x 1 800W 1 x 2500W

• 1Ω @ 14.4 Volts - 1 x 2500W 1 x 3500W 1 x 5000W

• Subsonic Filter - 10Hz-50Hz 10Hz-50Hz 10Hz-50Hz

• Capability 2Ω Stereo 1Ω Mono 1Ω Mono 1Ω Mono

• Master Carton 3 2 1 1

Dimensions Length Width Height

A7 125.4 16.63in / 422mm 10.25in / 260mm 2.20in / 64mm

A7 2500.1 16.88in / 429mm 10.25in / 260mm 2.20in / 64mm

A7 3500H.1 22.38in / 569mm 10.25in / 260mm 2.20in / 64mm

A7 5000H.1 25.59in / 650mm 10.25in / 260mm 2.20in / 64mm

Images displayed are for illustration purposes only and may differ from actual photos 3
PRODUCT GUIDE

WDX
MINI AMPLIFIERS

FEATURES:
• Class D Circuitry
• Direct Connect Speaker Terminals
• 4 Gauge Power Wire Input
• CHM- Collective Heat Management
• ACT - Adaptive Crossover Technology
• SESI - Signal Evaluation Status Indicator
• APC - Audio Protection Circuit
• 0 Gauge Power Input (WDX 4000.1)

WDX300.4 WDX200.4 WDX100.4

• Internal Circuitry 4 Channel Class D 4 Channel Class D 4 Channel Class D
• 4Ω @ 14.4 Volts 4 x 300W 4 x 200W 4 x 100W
• 2Ω @ 14.4 Volts 4 x 400W 4 x 300W 4 x 150W
• 4Ω Bridged 2 x 400W 2 x 300W 2 x 150W
• Capability 2Ω Stereo 2Ω Stereo 2Ω Stereo
• Master Carton 5 5 5
4
 PRODUCT GUIDE
WDX
MINI AMPLIFIERS

WDX4000.1 WDX3000.1 WDX2000.1 WDX1500.1 WDX1000.1

• Internal Circuitry Class D Mono Class D Mono Class D Mono Class D Mono Class D MonoW
W
• 1Ω @ 14.4 Volts 1 x 4000W 1 x 3000W 1 x 2000W 1 x 1500W 1 x 1000W
• 2Ω @ 14.4 Volts 1 x 2000W 1 x 1500W 1 x 1000W 1 x 750W 1 x 500W
• 4Ω @ 14.4 Volts 1 x 1000W 1 x 750W 1 x 500W 1 x 375W 1 x 250W
• Variable Subsonic Filter 10Hz ~ 40Hz 10Hz ~ 40Hz 10Hz-40Hz 10Hz-40Hz 10Hz-40Hz
• Capability 1Ω Mono 1Ω Mono 1Ω Mono 1Ω Mono 1Ω Mono
• Master Carton 3 4 5 5 5

WDX5500.5
• Internal Circuitry 5 Channel Class D
• Power @ 14.4 Volts 4 x 200W @ 4Ω + 500W @ 2Ω
• Power @ 14.4 Volts 4 x 400W @ 2Ω + 500W @ 2Ω
• Variable Subsonic Filter 0Hz ~ 25Hz
• Capability 2Ω Stereo / 2Ω 5th Channel
• Master Carton 5

5.55in / 141mm
Dimensions Length Height Width

WDX100.4 8.27” / 210mm 2.40in / 61mm 5.55in / 141mm

WDX200.4 9.06” / 230mm 2.40in / 61mm 5.55in / 141mm

WDX300.4 10.63” / 270mm 2.40in / 61mm 5.55in / 141mm

WDX1000.1 9.06” / 230mm 2.40in / 61mm 5.55in / 141mm

WDX1500.1 10.63” / 270mm 2.40in / 61mm 5.55in / 141mm

WDX2000.1 12.13” / 300mm 2.40in / 61mm 5.55in / 141mm

WDX3000.1 15.28” / 388mm 2.40in / 61mm 5.55in / 141mm

2.40in / 61mm

WDX4000.1 20.59” / 523mm 2.40in / 61mm 5.55in / 141mm

WDX5500.5 10.63” / 270mm 2.40in / 61mm 5.55in / 141mm

5
PRODUCT GUIDE

WDXAMPLIFIERS

FEATURES:
• 2Ω Stereo Capability 4 Channel Model • Buffered Pre-amp input
• 1Ω Mono Capability on All Mono Amplifiers • Selectable 6dB-12dB Boost @ 45Hz
• Blue LED POWER-ON Indicator • DRIVESINK Heat Management System
• Variable Low Level RCA Input • Unregulated DB-DC PWM Power Supply
• Variable 12DB Per Octave Low-Pass X-Over • Speaker Short Circuit Protection
* Bass Remote Include
• Direct- Connect Connection Terminals • * Bass Remote Included WDX 1KG2, WDX 2KG2
WDX 3KG2 & WDX 5KG2

6.53in / 166mm

Dimensions Length Height Width

WDX 300.4G2 9.05in / 230mm 2.25in / 57mm 6.53in / 166mm

WDX 400.4G2 11.41in / 290mm 2.25in / 57mm 6.53in / 166mm

WDX 800.4G2 13.77in / 350mm 2.25in / 57mm 6.53in / 166mm

2.25in / 57mm

WDX 1KG2 7.08in / 180mm 2.25in / 57mm 6.53in / 166mm

WDX 2KG2 10.11in / 257mm 2.25in / 57mm 6.53in / 166mm

WDX 3KG2 13.30in / 338mm 2.25in / 57mm 6.53in / 166mm

WDX 5KG2 18.62in / 473mm 2.25in / 57mm 6.53in / 166mm

CONTACT US: (877) 787-011

TM
6 www.dbdrive.net
 PRODUCT GUIDE
WDX
AMPLIFIERS

WDX 300.4G2 WDX 400.4G2 WDX 800.4G2 *WDX 1KG2 *WDX 2KG2 *WDX 3KG2 *WDX 5KG2
• Internal Circuitry 4 Ch. Class AB 4 Ch. Class AB 4 Ch. Class AB Class D Mono Class D Mono Class D Mono Class D Mono

• 4Ω @ 14.4 Volts 4x60 Watts 4x80 Watts 4x110 Watts 1x250 Watts 1x500 Watts 1x750 Watts 1x1250 Watts

• 4Ω Bridged 2x180 Watts 2x240 Watts 2x330 Watts - - - -

• 2Ω @ 14.4 Volts 4x120 Watts 4x160 Watts 4x220 Watts 1x500 Watts 1x1000 Watts 1x1500 Watts 1x2500 Watts

• 1Ω @ 14.4 Volts - - - 1x1000 Watts 1x2000 Watts 1x3000 Watts 1x5000 Watts

• Capability 2Ω Stereo 2Ω Stereo 2Ω Stereo 1Ω Mono 1Ω Mono 1Ω Mono 1Ω Mono

• Master Carton 4 4 4 4 4 4 3

6.53in / 166mm
2.25in / 57mm

Images displayed are for illustration purposes only and may differ from actual photos 7
PRODUCT GUIDE

WDX
MARINE AMPLIFIERS

FEATURES:
• 4 Channel full range class D technology
• IPX6 Marine grade conformal coated PCB
• ACT – Adaptive Crossover Technology
• CHM – Collective Heat Management
• APC – Audio Protection Circuit
• 2 ohm stereo load capability
• Bridgeable outputs @ 4ohm load
• Compatible with any 4/2 ohm loudspeaker

WDX M4 1500 WATTS

• POWER: 4 X 150 WATTS @ 4 OHMS

• POWER: 4 X 300 WATTS @ 2 OHMS
• POWER: 2 X 600 WATTS , Bridged
• Frequency Response: 20Hz ~ 22KHz
• Signal to Noise Ratio: 103 5.23 in. / 133.4mm
• Damping factor: 200<
1.93in / 49mm

• Low Level Input: 6V - 0.2mV

• Independent Selectable X-over for HPF / LPF /Full
• Variable High/Low Pass Filter (Ch1/2): 40Hz ~ 300Hz
• Variable High/Low Pass Filter (Ch3/4): 40Hz ~ 300Hz
• Working Voltage: 12 ~ 15 volts
Dimensions
Dimensions Length
L H
Height W
Width
WDX M4 10.20 in. / 259mm 1.93 in. / 49mm 5.23 in. / 133mm

CONTACT US: (877) 787-011

TM
8 www.dbdrive.net
 PRODUCT GUIDE
WDX
MARINE AMPLIFIERS

FEATURES:
• Mono Class D Technology
• IPX6 Marine Grade Conformal Coated PCB
• ACT – Adaptive Crossover Technology
• CHM – Collective Heat Management
• APC – Audio Protection Circuit
• Amphibious Compliant Connections
• 1 Ohm Mono Capability
• Compatible with any 1 or 2 Ohm Subwoofer
• Bass Remote Included

WDX M1.5 1500 WATTS

• POWER: 1 X 1500 WATTS @ 1 OHM
• POWER: 1 X 750 WATTS @ 2 OHMS
• POWER: 1 X 375 WATTS @ 4 OHMS
• Frequency Response :20Hz ~ 250Hz 5.23in / 133mm
• Signal to Noise Ratio: 95
1.93in / 49mm

• Damping Factor: 100<

• Low Level Input: 6V - 0.2mV
• Variable Low Pass Filter : (12 dB Slope) 30Hz ~ 300Hz
• Variable Subsonic Filter (12 dB Slope) 25Hz ~ 60Hz
• Selectable Bass Boost @ 45Hz: 0-12dB
Dimensions
Dimensions Length
L H
Height W
Width
• Working Voltage : 12 ~ 15 volts
WDX M1.5 10.20 in. / 259mm 1.93 in / 49mm 5.23in / 133mm

Images displayed are for illustration purposes only and may differ from actual photos 9
PRODUCT GUIDE

NEO
POWERSPORTS
AMPLIFIERS

FEATURES
• 5 Channel Full Range D Technology
• 2Ω stereo load capability on Stereo Channels
• 2Ω mono load Capability on 5th Mono Channel
• Amphibious grade conformal coating on PCB
• Audiophile Grade RCA connectors
• Variable 12 db High/ Low-pass Crossover Filters
• Bridgable outputs @ 4Ω load
• Double Sided Circuit Tablet
• Remote Bass Control Included
• Compatible with any 4/2 Ω Loudspeaker
NEO 5v2
5 CHANNEL CLASS D AMPLIFIER

8.26” / 210 mm
SPECS NEO5v2
• Internal Circuitry 5 Ch. Class D

• 4Ω @ 14.4 Volts 4x125 Watts

5.3” / 135mm

• 2Ω @ 14.4 Volts 4x250 Watts

• 4Ω Bridged 2x250 Watts

• 2Ω @ 14.4 Volts / 5 Ch 1X 500 Watts

• Capability 4/2 Ω

• Master Carton 5

Bass Remote
Included

5.3in / 135mm
1.88” / 48mm

CONTACT US: (877) 787-011

TM
10 www.dbdrive.net
 PRODUCT GUIDE
NEO
POWERSPORTS
AMPLIFIERS

Bass Remote Included

(NEO1.5Kv2)

FEATURES CLASS

• Class D Circuitry
• 2Ω Stereo capability (NEO4v2)
• 1Ω Mono capability (NEO1.5Kv2)
• Audiophile grade RCA connectors
• Amphibious grade conformal coating on PCB SPECS NEO4v2 *NEO1.5Kv2
• Marine grade conformal coated on PCB • Internal Circuitry 4 Ch. Class D Class D Mono
• Double sided circuit tablet • 4Ω @ 14.4 Volts 4x125 Watts -
• Bridgable outputs @ 4Ω load (NEO4v2) • 2Ω @ 14.4 Volts 4x250 Watts -
• Remote Bass Control Included (NEO1.5Kv2)
• 4Ω Bridged 2x500 Watts -

• 1Ω @ 14.4 Volts - 1x750 Watts

• Capability 4 / 2Ω 1Ω Mono

• Master Carton 8 8

5.3in / 135mm
1.88” / 48mm

Dimensions
Dimensions Length
L Height
H Width
W
NEO4v2 6.25” / 159mm 1.88” / 48mm 5.3” / 135mm

NEO1.5Kv2 7.6” / 195mm 1.88” / 48mm 5.3” / 135mm

Images displayed are for illustration purposes only and may differ from actual photos 11
PRODUCT GUIDE

POWERSPORTS AMPLIFIERS

MICRO SIZE
MINI AMP

FEATURES
• Class D full range circuitry
1.92” / 48.7mm

• 2 Ω stereo capability (NEO M2/ NEO M4)

• 2 Ω mono capability (NEO M1)
• Audiophile grade connectors
• Marine grade conformal coated on PCB
• THD (100Hz @ 1Ω) 0.04%
• Bandwidth (-3dB) 18-150Hz
• Damping factor (100Hz @ 4Ω) 126
• S/N Ratio (as weighted @ 1Volt) 99dB
4.13in / 155mm
• Input sensitivity: 0.20MV - 6V

CONTACT US: (877) 787-011

TM
12 www.dbdrive.net
 PRODUCT GUIDE
POWERSPORTS AMPLIFIERS

SPECS NEOM1 NEOM2 NEOM4

Internal Circuitry Class D Mono 2 Ch. Class D 4 Ch. Class D

4Ω @ 14.4 Volts 1x250 Watts 2x125 Watts 4x50 Watts
2Ω @ 14.4 Volts 1x500 Watts 2x250 Watts 4x100 Watts
4Ω Bridged - 1x500 Watts -
Capability 2Ω Mono 2Ω Stereo 2Ω Stereo
Master Carton 10 10 10

Dimensions L H W

NEOM1 6.10in / 155mm 1.92in /48.7mm 4.13in / 105mm

NEOM2 6.10in / 155mm 1.92in /48.7mm 4.13in / 105mm
NEOM4 6.10in / 155mm 1.92in /48.7mm 4.13in / 105mm

Images displayed are for illustration purposes only and may differ from actual photos 13
PRODUCT GUIDE

MOTO
POWERSPORTS AMPLIFIERS

Monoblock Class D Amplifier

FEATURES
• Conformal PCB Coating
• CHM- Collective Heat Management
• ACT - Adaptive Crossover Technology
• APC - Audio Protection Circuit
• Class D Circuitry
• 4 Gauge

5.32in / 135.1mm

2.46in / 62.5mm

SPECS MOTO2000/1 MOTO1000/1

Internal Circuitry Class D Mono Class D Mono

1Ω @ 14.4 Volts 1x2000 Watts 1x1000 Watts
2Ω @ 14.4 Volts 1x1000 Watts 1x500 Watts
4Ω @ 14.4 Volts 1x500 Watts 1x250 Watts
Capability 1Ω Mono 1Ω Mono
Master Carton 5 5

DIMENSIONS L H W

MOTO2000/1 7.54in (191.5mm) 2.46in (62.5mm) 5.32in (135.1mm)

MOTO1000/1 6.65in (168.9mm) 2.46in (62.5mm) 5.32in (135.1mm)

CONTACT US: (877) 787-011

TM
14 www.dbdrive.net
 PRODUCT GUIDE
MOTO
POWERSPORTS AMPLIFIERS

4 Channel Class D Full Range Amplifier

FEATURES
• Conformal PCB Coating
• CHM- Collective Heat Management
• ACT - Adaptive Crossover Technology
• APC - Audio Protection Circuit
• Class D Circuitry
• 4 Gauge

5.32in / 135.1mm
2.46in / 62.5mm

SPECS MOTO400/4 MOTO800/4

Internal Circuitry 4 Channel Class D 4 Channel Class D

4Ω @ 14.4 Volts 4 x 150 Watts 4 x 300 Watts
2Ω @ 14.4 Volts 4 x 200 Watts 4 x 400 Watts
4Ω @ 14.4 Volts (Bridged) 2 x 200 Watts 2 x 400 Watts
Capability 2Ω Stereo 2Ω Stereo
Master Carton 5 5

DIMENSIONS L H W

MOTO400/4 6.65in (168.9mm) 2.46in (62.5mm) 5.32in (135.1mm)

MOTO800/4 7.83in (198.9mm) 2.46in (62.5mm) 5.32in (135.1mm)

Images displayed are for illustration purposes only and may differ from actual photos 15
PRODUCT GUIDE

AMPLIFIERS

* Bass Remote Included

SPA6.1M, SPA12.1D, SPA15.1D

FEATURES:
• 2Ω Stereo Capability 4 Channel Model • Variable High-Pass or Low-pass crossover
• 1Ω Mono Capability ( SPA12.1D/SPA15.1D ) filters ( SPA8.4 )
• 2Ω Mono Capability (SPA6.1M) • Direct- Connect Connection Terminals
• Low Level RCA Input • Buffered Pre-amp input
• Variable 12DB Per Octave Low-Pass X-Over • Double Sided PCB

6.98in / 177.4mm
1.93” / 49.1mm

CONTACT US: (877) 787-011

TM
16 www.dbdrive.net
 PRODUCT GUIDE
AMPLIFIERS

SPECS SPA8.4 SPA6.1M SPA12.1D SPA15.1D

Internal Circuitry 4 Channel Class AB Mono Class A/B Mono Class D Mono Class D
4Ω @ 14.4 Volts 4 x 80 Watts 1 x 300 Watts
2Ω @ 14.4 Volts 4 x 160 Watts 1 x 600 Watts 1 x 600 Watts 1 x 750 Watts
1Ω @ 14.4 Volts 1 x 1200 Watts 1 x 1500 Watts
4Ω Bridged 2 x 320Watts - - -
Capability 2Ω Stereo 2Ω Mono 1Ω Mono 1Ω Mono
Master Carton 4 4 4 4

DIMENSIONS
Dimensions L H W
SPA8.4SPA8.4 11.61in / 295mm 1.93 / 49.1mm 6.98in / 177.4mm
SPA6.1M
SPA6.1M
7.0in / 180mm 1.93 / 49.1mm 6.98in / 177.4mm
SPA12.1D
SPA12.1D
10.82in / 275mm 1.93 / 49.1mm 6.98in / 177.4mm
Dimensions
SPA15.1D
SPA15.1D 10.82in / 275mm H
1.93 / 49.1mm 6.98in /W
177.4mm

Images displayed are for illustration purposes only and may differ from actual photos 17
 PRODUCT GUIDE

TM SERIES
SUBWOOFERS

FEATURES:
• Ceramic Ferrite Magnet
• High Temperature Voice Coil • High Excursion Spider Design
• 1.5” (38mm) Wide Roll Foam Surround
• High Grade Low Carbon Steel Plates
• Designed to Optimize SPL Performance
• Large gauge compression terminals
• Protective magnet cover
• Rubber gasket trim ring
6000 WATTS
MAX POWER

WDX8G5.2 WDX10G5.2 WDX12G5.2 WDX15G5.2

SPECS WDX18G5.2
WDX8G5.4 WDX10G5.4 WDX12G5.4 WDX15G5.4
Structure 8”(20.3cm) Woofer 10”(25.4cm) Woofer 12” (30.4cm) Woofer 15” (38cm) Woofer 18” (45.7cm) Woofer
Max power 1800 Watts 3000 Watts 6000 Watts 6000 Watts 6000 Watts
Nominal Power 900 Watts 1500 Watts 3000 Watts 3000 Watts 3000 Watts
Dual 2Ω Voice Coil Dual 2Ω Voice Coil Dual 2Ω Voice Coil Dual 2Ω Voice Coil Dual 2Ω Voice Coil
Impedance
Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil
Voice Coil 2.5” 3” 3” 3” 3”
Magnet Size 150oz. 220oz. 220oz. 220oz. 220oz.
V/C Winding Length 45 mm 45 mm 50 mm 50 mm 50 mm
Master Carton 2 1 1 1 1

Dimensions

WDX8G5.2 / WDX8G5.4 WDX10G5.2 / WDX10G5.4 WDX12G5.2 / WDX12G5.4 WDX15G5.2 / WDX15G5.4 WDX18G5.2

12.95in / 32.9cm 15.71in / 39.9cm 18.46in / 46.9cm
8.78in / 22.3cm 10.98in / 27.9cm
9.82in /24.9cm
8.01in / 20.3cm

8.37in /21.2cm
7.22in / 18.3cm
6.32in / 16cm

7.32in / 18.6cm 9.40in / 23.9cm 11.18in / 28.4cm 13.74in / 34.9cm 16.61in / 42.2cm

CONTACT US: (877) 787-011

TM
18 www.dbdrive.net
 PRODUCT GUIDE
SUBWOOFERS
TM
SERIES

4000 WATTS
MAX POWER

SPECS WDX12G3.4 WDX15G3.4

FEATURES:
• Protective magnet cover Structure 12” (30.4cm) Woofer 15” (38.1cm) Woofer
• Large gauge compression terminals Max power 4000 Watts 4000 Watts
• Rubber gasket trim ring Nominal Power 2000 Watts 2000 Watts
• Die-cast aluminum vented basket Impedance Dual 4Ω Voice Coil Dual 4Ω Voice Coil
• Dual poly-cotton dampeners Voice Coil 3” 3”
• Double stitched foam surround V/C Winding Length 45 mm 45 mm
• Non-Pressed paper cone Magnet Size 190oz. 190oz.
• High temperature voice coil Master Carton 1 1

Dimensions

WDX12G3.4 WDX15G3.2
12.95in / 329mm 15.71in / 39.9mm
8.56in / 217.5 mm
7.46in / 189.5 mm

11.18n / 284mm 13.74in / 349 mm

Images displayed are for illustration purposes only and may differ from actual photos 19
 PRODUCT GUIDE

TM SERIES
SUBWOOFERS

FEATURES:

2500 WATTS
• Non-Pressed paper cone • Rubber gasket trim ring
• Double stitched foam surround • Large gauge compression
• Dual poly-cotton dampeners terminals
• Die-cast aluminum vented basket MAX POWER
• Protective magnet cover

WDX6.5G2.2 WDX8G2.2 WDX12G2.2 WDX15G2.2

SPECS WDX6.5G2.4 WDX8G2.4
WDX10G2.4 WDX12G2.4 WDX15G2.4

Structure 6.5” (16.5cm) 8” (20.32cm) 10” (16.5cm) 12” (30.48cm) 15” (38.1cm)
Max power 1500 Watts 1500 Watts 2200 Watts 2500 Watts 2500 Watts
Nominal Power 750 Watts 750 Watts 1100 Watts 1250 Watts 1250 Watts
2Ω Dual Voice Coil 2Ω Dual Voice Coil 4Ω Dual Voice Coil 2Ω Dual Voice Coil/ 2Ω Dual Voice Coil/
Impedance
/4Ω Dual Voice Coil /4Ω Dual Voice Coil 4Ω Dual Voice Coil 4Ω Dual Voice Coil

Voice Coil 2” (50.8mm) 2.5”(63.5mm) 3” (76.2 mm) 3” (76.2mm) 3” (76.2mm)

Magnet Size 75 oz. 100 oz. 150 oz. 150 oz. 150 oz.
Master Carton 2 2 1 1 1
V/C Winding Length 45 mm 45 mm 45 mm 45 mm 45 mm

Dimensions

WDX6.5G2.4 WDX8G2.4
WDX6.5G2.2 WDX10G2.4 WDX12G2.4 / WDX12G2.2 WDX15G2.4 / WDX15G2.2
WDX8G2.2
10.98in / 27.9cm 12.95in / 32.9cm 15.71in / 39.9cm
7.20in / 18.3cm 8.78in / 22.3cm
7.58in / 192mm

8.48in / 215mm
5.18in / 13.1cm

7.09in / 18cm
6.30in / 16cm

5.98in / 15.2cm 7.32in / 18.6cm 9.40in / 23.9cm 11.34in / 28.8cm 13.98in / 35.5cm

20
 PRODUCT GUIDE
TM SERIES
SUBWOOFERS

FEATURES:
• High Temperature Voice coil
• Non-Pressed Paper cone
• Double stitched foam surround
• Dual poly-cotton dampeners
• Die-cast aluminum vented basket
• Rubber gasket trim ring
• Large Gauge compression terminals
• Protective magnet cover

2000 WATTS
MAX POWER

SPECS WDX6.5G1.4 WDX8G1.4 WDX10G1.4 WDX12G1.4 WDX15G1.4

Structure 6.5” (16.5cm) Woofer 8” (20.3cm) Woofer 10” (25.4cm) Woofer 12”(30.4cm) Woofer 15”(38.1cm) Woofer
Max power 600 Watts 1200 Watts 2000 Watts 2000 Watts 2000 Watts
Nominal Power 300 Watts 600 Watts 1000 Watts 1000 Watts 1000 Watts
Impedance Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil
Voice Coil 1.5” 2” 3” 3” 3”
Magnet Size 80oz. 120oz. 135oz. 135oz. 135oz.
Master Carton 4 2 1 1 1

Dimensions

WDX12G1.4 WDX15G1.4
WDX6.5G1.4 WDX8G1.4 WDX10G1.4 15.51in / 39.4cm
12.78in / 32.3cm
8.76in / 22.25cm 9.96in / 25.2cm
7.22in / 18.33cm
6.84in / 17.37cm
5.33in / 13.53cm

7.94in / 20.1cm
7.44in / 18.8cm
4.60in / 11.6cm

5.94in / 15.08cm 7.20in / 18.2cm 9.17in / 23.2cm 11.06in / 28cm

13.74in / 34.8cm

21 21
PRODUCT GUIDE

SUBWOOFERS
TM
SERIES

1200* WATTS
MAX POWER

FEATURES:
• 2” High Temperature Voice coil (WDX8G0.4)
• 2.5” High Temperature Voice coil
(WDX10G0.4, *WDX12G0.4)
• 4 Ohm DVC
• Reinforced Paper cone
• Double stitched foam surround
• Dual poly-cotton dampeners
• Stamped Cast Steel vented basket
• Rubber gasket trim ring
• Large Gauge compression terminals
• Protective magnet cover

22
 PRODUCT GUIDE
SUBWOOFERS
TM
SERIES

SPECS WDX8G0.4 WDX10G0.4 *WDX12G0.4

Structure 8” (20.3cm) Woofer 10” (25.4cm) Woofer 12”(30.4cm) Woofer
Max power 800 Watts 1000 Watts 1200 Watts
Nominal Power 400 Watts 500 Watts 600 Watts
Impedance Dual 4Ω Voice Coil Dual 4Ω Voice Coil Dual 4Ω Voice Coil
Voice Coil 2” 2.5” 2.5”
Magnet Size 80oz. 100oz. 100oz.
Master Carton 2 2 2

Dimensions

WDX12G0.4
WDX8G0.4 WDX10G0.4
12.78in / 32.3cm
9.96in / 25.2cm
8.76in / 22.25cm
4.62in / 11.75cm

5.85in / 14.85cm

6.51in / 16.55cm

6.90in / 17.53cm 9.07in / 23.05cm 10.85in / 27.58cm

23
PRODUCT GUIDE

SUBWOOFERS

SPWSERIES
FEATURES:
• 2” (50mm) 4 Layer Voice Coil w/ KSV Former
• 64oz. Ferrite Oxide magnet
• Vac PP Sub Cone Structure with
Butyl rubber Surround
• Inverted Vac PP Dome
• Anti-resonant Stamped Steel frame
• High Carbon Steel top and bottom plates
• Poly-Cotton Dampeners
• Compression Speaker Terminals

1250 WATTS
MAX POWER

SPECS SPW10D4 SPW12D4

Structure 10” (25.4cm) Woofer 12” (30.4cm) Woofer

Max power 1250 Watts 1250 Watts

Nominal Power 600 Watts 600 Watts

Impedance Dual 4Ω Voice Coil Dual 4Ω Voice Coil

Master Carton 2 2

Dimensions
SPW10D4 SPW12D4
10.43in / 26.5cm 12.50in / 31.7cm
5.24in / 13.3cm

5.9in / 15cm

9.06in / 23cm 10.89in / 27.6cm

CONTACT US: (877) 787-011

TM
24 www.dbdrive.net
 PRODUCT GUIDE
SUBWOOFERS

SPXSERIES
FEATURES:
• 2” (50mm) Voice Coil w/ KSV Former
• 23oz. Ferrite Oxide magnet
• PP Cone Structure with Foam Surround
• Vac PP Dome
• Anti-resonant Stamped Steel frame
• High Carbon Steel top and bottom plates
• Poly-Cotton Dampeners
• Compression Speaker Terminals

900 WATTS
MAX POWER

SPECS SPX10D4 SPX10S4 SPX12D4 SPX12S4

Structure 10” (25.4cm) Woofer 10” (25.4cm) Woofer 12” (30.4cm) Woofer 12” (30.4cm) Woofer

Max power 900 Watts 900 Watts 900 Watts 900 Watts

Nominal Power 300 Watts 300 Watts 300 Watts 300 Watts

Impedance Dual 4Ω Voice Coil Single 4Ω Voice Coil Dual 4Ω Voice Coil Single 4Ω Voice Coil

Master Carton 2 2 2 2

Dimensions

SPX10D4 / SPX10S4 SPX12D4 / SPX12S4

10.43in / 26.5cm 12.50in / 31.7cm
4.76in / 12.1cm

5.4in / 13.8cm

9.06in / 23cm 10.89in / 27.6cm

Images displayed are for illustration purposes only and may differ from actual photos 25
PRODUCT GUIDE

SHALLOW SUBWOOFERS

1000 WATTS
MAX POWER

FEATURES:
• 2.5” (63mm) 4 Layer Dual 4 Ohm VC
w/ Aluminum Former
• Ferrite Magnet
• IMPP Cone with Foam Surround
• Ultra Thin Stamped Steel Frame Design
• Blue Zinc Finished Top and Bottom Plates
• Mixed C Fiber Spider
• Heavy Gauge Spring Terminals

CONTACT US: (877) 787-011

TM
26 www.dbdrive.net
 PRODUCT GUIDE
SHALLOW SUBWOOFERS

SPECS SPF10D4 SPF12D4

Structure 10” (25.4cm) Woofer 12” (30.4cm) Woofer
Max power 1000 Watts 1000 Watts
Nominal Power 300 Watts 300 Watts
Impedance Dual 4Ω Voice Coil Dual 4Ω Voice Coil
Magnet Size 40oz. 60oz.
Master Carton 4 4

Dimensions

SPF10D4 SPF12D4
10.37in / 26.3cm 12.42in / 31.5cm
3.5in / 8.9cm

3.5in / 8.9cm

9.05in / 23cm 11.18in / 28.4cm

Images displayed are for illustration purposes only and may differ from actual photos 27
 PRODUCT GUIDE

FEATURES:
• 0.75” (19mm) MDF High Grade Construction
• Dual Layer Front Baffle 1.5” (38mm) Thick
• Counter Sunk Subwoofer Mounting
T-nut Fasteners
• Plush Protective Carpet with
Signature WDX Logo
• Factory tuned vent
• Protective Bar Grills
• 12 Gauge Copper Wiring
• Spring load terminals

Preloaded with WDX G2 Series Subwoofers

BASS CRATE BOX SPECIFICATIONS

NUMBER OF OHM LOAD WATTS LENGTH, WIDTH, HEIGHT
SUBWOOFER SUBWOOFERS

WDX6-2BC 2 SUBS 1Ω or 4Ω 1000 Watts 20in/50.8cm x 12.9in/32.7cm x 9in/22.8cm

WDX6-3BC 3 SUBS 1Ω 1500 Watts 28in/71.1cm x 15.8in/40.1cm x 11in/27.9cm
WDX8-1BC 1 SUB 1Ω or 4Ω 1000 Watts 23.62in/59.9cm x 15.9in/40.3cm x 10.7in/27.1cm
WDX8-2BC 2 SUBS 1Ω or 4Ω 1500 Watts 27.9in/70.8cm x 15in/38.1cm x 12in/30.4cm
WDX8-3BC 3 SUBS 1Ω 3000 Watts 36in/91.4cm x 15.8in/40.1cm x 13in/33cm
WDX10-1BC 1 SUB 1Ω or 4Ω 1000 Watts 22.9in/58.1cm x 15.9in/40.3cm x 13in/33cm
WDX10-2BC 2 SUBS 1Ω or 4Ω 3000 Watts 32in/81.2cm x 15in/38.1cm x 13in/33cm
WDX12-1BC 1 SUB 1Ω or 4Ω 3000 Watts 28in/71.1cm x 16in/40.6cm x 15in/38.1cm
WDX12-2BC 2 SUBS 1Ω or 4Ω 3000 Watts 32in/81.2cm x 16.8in/42.6cm x 15in/38.1cm

28
 PRODUCT GUIDE
FEATURES:
• MDF High Grade Construction
• Dual Layer Front Baffle
• Counter Sunk Subwoofer Mounting T-nut Fasteners
• Plush Protective Carpet with Signature Speed Logo
• 12 Gauge Copper Wiring
• Spring load terminals

Preloaded with SPX Series Subwoofers

BASS CRATE BOX SPECIFICATIONS

NUMBER OF OHM LOAD MAX POWER NOMINAL POWER LENGTH, WEDGE WIDTH, HEIGHT
SUBWOOFER SUBWOOFERS

SPX10-2BC 2 SUBS 1Ω or 4Ω 1000 Watts 500 Watts 24in/60.9cm x 15in/38cm x 12in/30.4cm

SPX12-1BC 1 SUB 4Ω 900 Watts 300 Watts 13.9in/35.3cm x 16.4in/41cm/ x 13in/33cm
SPX12-2BC 2 SUBS 1Ω or 4Ω 1000 Watts 500 Watts 28.5in/72.3cm x 16.4in/41cm x 13.25in/33.6cm

29
 RECOMMENDED RECOMMENDED RECOMMENDED
PRODUCT GUIDE
SUBWOOFER NUMBER OF SUBWOOFERS AMPLIFIER OPTION 1 AMPLIFIER OPTION 2 AMPLIFIER OPTION 3

DB DRIVE WDX G5
WDX8G5.2 1 SUB @ 1Ω WDX 2KG2 SPA15.1D
WDX8G5.4 2 SUBS @ 1Ω WDX 3KG2 A7 2500.1 SPA15.1D
WDX10G5.2 1 SUB @ 1Ω WDX 2KG2 SPA15.1D
WDX10G5.4 2 SUBS @ 1Ω WDX 5KG2 A7 2500.1 SPA15.1D
WDX12G5.2 1 SUB @ 1Ω WDX 3KG2 A7 2500.1
WDX12G5.4 2 SUBS @ 1Ω WDX 5KG2 A7 3500.1 A7 5000.1
WDX15G5.2 1 SUB @ 1Ω WDX 3KG2 A7 2500.1
WDX15G5.4 2 SUBS @ 1Ω WDX 5KG2 A7 5000.1 A7 3500.1
WDX18G5.2 1 SUB @ 1Ω WDX 3KG2 A7 2500.1
DB DRIVE WDX G3
WDX12G3.4 2 SUBS @ 1Ω WDX 5KG2 A7 2500.1 WDX 3KG2
WDX12G3.4 2 SUBS @ 1Ω WDX 5KG2 A7 2500.1 WDX 3KG2
DB DRIVE WDX G2
WDX6.5G2.4 2 SUBS @ 1Ω WDX 1KG2 NEO1.5Kv2 SPA15.1D
WDX8G2.4 2 SUBS @ 1Ω WDX 1KG2 NEO1.5Kv2 SPA15.1D
WDX10G2.4 2 SUBS @ 1Ω WDX 2KG2
WDX12G2.4 2 SUBS @ 1Ω WDX 3KG2
WDX12G2.2 1 SUB @ 1Ω WDX 2KG2 NEO1.5Kv2 SPA15.1D
WDX15G2.4 2 SUBS @ 1Ω WDX 3KG2
WDX15G2.2 1 SUB @ 1Ω WDX 2KG2 NEO1.5Kv2 SPA15.1D

More powerful amplifiers may be used with proper calibration.

Recommended minimum amplifier power options from most compatible (Green) to acceptable ( Orange) levels.
Notice:
DB DRIVE WDX G2F
WDX8G2F-4 2 SUBS @ 1Ω WDX 1KG2 NEO1.5Kv2 SPA12.1D
WDX10G2F-4 2 SUBS @ 1Ω WDX 2KG2 NEO1.5Kv2 SPA15.1D
DB DRIVE WDX G1
WDX6.5G1.4 2 SUBS @ 1Ω WDX 1KG2 NEO1.5Kv2 SPA12.1D
WDX8G1.4 2 SUBS @ 1Ω WDX 1KG2 NEO1.5Kv2 SPA15.1D
WDX10G1.4 2 SUBS @ 1Ω WDX 1KG2 SPA15.1D NEO1.5Kv2
WDX12G1.4 2 SUBS @ 1Ω WDX2 KG2 SPA15.1D
WDX15G1.4 2 SUBS @ 1Ω WDX 2KG2 SPA15.1D SPA12.1D
DB DRIVE SPEED SERIES
SPW10D4 2 SUBS @ 1Ω WDX 1KG2 SPA12.1D NEO1.5Kv2
SPW10D4 1 SUBS @ 2Ω SPA6.1M SPA12.1D NEO M1
SPW12D4 2 SUBS @ 1Ω SPA12.1D NEO1.5Kv2 SPA15.1D
SPW12D4 1 SUBS @ 2Ω SPA6.1M NEO1.5Kv2 SPA12.1D

SPF10D4 2 SUBS @ 1Ω WDX 1KG2 SPA12.1D

SPF12D4 2 SUBS @ 1Ω SPA12.1D NEO1.5Kv2

SPX10D4 2 SUBS @ 1Ω SPA12.1D

SPX10D4 1SUBS @ 2Ω SPA6.1M NEO M1
SPX10S4 2 SUBS @ 2Ω SPA6.1M NEO M1 SPA8.4 - 4CH
SPX12D4 1 SUB @ 2Ω SPA6.1M NEO M1
SPX12D4 2 SUBS @1Ω SPA12.1D
SPX12S4 2 SUB @ 2Ω SPA12.1D NEO1.5Kv2 SPA8.4 - 4CH
WDX BASS CRATE
WDX6-2BC 2 SUBS WDX 1KG2 @ 1Ω NEO1.5Kv2@1Ω
WDX6-3BC 3 SUBS WDX 2KG2 @ 1Ω SPA12.1D@1Ω
WDX8-1BC 1 SUB WDX 1KG2 @ 1Ω NEO1.5Kv2@1Ω
WDX8-2BC 2 SUBS WDX 2KG2 @ 1Ω SPA15.1D
WDX8-3BC 3 SUBS WDX 3KG2 @ 1Ω SPA15.1D
WDX10-1BC 1 SUB WDX 1KG2 @ 1Ω NEO1.5Kv2@1Ω
WDX10-2BC 2 SUBS WDX 2KG2 @ 1Ω SPA15.1D
WDX12-1BC 1 SUB WDX 1KG2 @ 1Ω SPA15.1D
WDX12-1BC 2 SUBS WDX 2KG2 @ 1Ω SPA15.1D

SPX10-2BC 2 SUBS SPA12.1D@1Ω WDX 1KG2 @ 1Ω

SPX12-1BC 1 SUB SPA8.4@4Ω WDX 400.4G2 @ 4Ω
SPX12-2BC 2 SUBS SPA12.1D@1Ω WDX 1KG2 @ 1Ω

30 CONTACT US: (877) 787-011

 PRODUCT GUIDE
TM
-AS10
10” (25.4cm) ACTIVE SUBWOOFER

FEATURES:
• Dynamic Power – 900 Watts
• RMS Power – 250 Watts
• Adjustable Input sensitivity
• Low Level RCA INPUTS
• Factory Radio High Level Inputs
• Selectable Audio Sensing Remote Turn On
• Variable Low-pass Filter 50Hz – 150Hz
• Variable Bass Boost @ 45Hz 0-18 dB
• Active Subsonic Filter @ 20Hz
• Selectable Phase Shift 0 to 180 Degrees
• Remote Gain Control
• Multi-fault Protection Circuitry
• MOSFET Power Supply

900 WATTS
• Dimensions L 13.5” (342mm) x
W 10.25” (260.35mm) x H 2.63” (66.80mm)
MAX POWER

Master Carton
3

Bass Remote Included

Factory Radio Bass Remote Low Profile

Compatible

• Powered 10” Sub-Woofer In Compact Size

• Fits Under Most Front Car Seats Fits Under
Most Seats
• Giving Your Vehicle Better Sound and Bass Response

Images displayed are for illustration purposes only and may differ from actual photos 31
PRODUCT GUIDE

TM

6MOTO-CD
6.5” 2 Way Loudspeaker with Backload Compression Driver

500 WATTS
MAX POWER

STAMPSTEEL

FEATURES:
• 1” Aluminum Compression Style Tweeter
• Element Rated Cone Design
• Bi-Ribbed Treated Cloth Surround
• 1.5” High Output Til Midrange Voice
• Protective Grill Included
• Wide Dispersion Conical Wave Guide

SPECS WDX6MOTO-CD WDX69MOTO-CD

Structure 6.5” (16.5cm) Loudspeaker 6x9” (15.2x22.8cm) Loudspeaker
Max power 500 Watts 650 Watts
Nominal Power 250 Watts 325 Watts
Impedance 4Ω 4Ω
Sensitivity 103.5dB 101.3dB
Frequency Response 90Hz - 18KHz 75Hz - 18KHz
32 Master Carton 4 4
 PRODUCT GUIDE
TM

650 WATTS MAX POWER

69MOTO-CD
6x9” 2 Way Loudspeaker with Backload Compression Driver

STAMPSTEEL

FEATURES:
• 1” Aluminum Compression Style Tweeter
• Element Rated Cone Design
• Bi-Ribbed Treated Cloth Surround
• 1.5” High Output Til Midrange Voice
• Protective Grill Included Dimensions
• Wide Dispersion Conical Wave Guide WDX6MOTO-CD WDX69MOTO-CD
4.97in / 126.4mm
3.9in / 98.3mm

4in / 103.4mm
3in / 78.3mm

5.6in / 144mm 8.66x5.94in / 220x151mm

6.9in / 174mm 10.39x7.2in / 264x183mm

33
PRODUCT GUIDE

TM

MOTOSERIES
46MOTO-G2 6MOTO-G2

150 WATTS MAX POWER 400 WATTS MAX POWER

8MOTO-G2

550 WATTS MAX POWER

FEATURES:
• Weather Resistant Speaker
• High Efficiency Loudspeaker
• Ultra Light Weight Treated Cone
• High Reaction Ribbed Treated Surround
• High Temperature Voice Coil
• 1.25” (28mm) Aluminum Dome Component
Grade Tweeter with Rear Resonance Chamber
• Radial Voice Coil Venting
• Low Profile Tweeter
• Protective Grills Included

SPECS WDX46MOTO-G2 WDX8MOTO-G2 WDX6MOTO-G2

Structure 4x6” (10.16x15.24cm) Loudspeaker 8” (203cm) Loudspeaker 6.5” (16.5cm) Loudspeaker
Max power 150 Watts 550 Watts 400 Watts
Nominal Power 55 Watts 275 Watts 175 Watts
Impedance 4Ω 4Ω 4Ω
Sensitivity 89.6dB 103.5dB 103.5dB
Frequency Response 82Hz - 21KHz 75Hz - 21KHz 80Hz - 21KHz
Master Carton 8 4 4

Dimensions
WDX46MOTO-G2 WDX6MOTO-G2 WDX8MOTO-G2
2.18in / 5.53cm

2.40in / 6.1cm

3.15in / 8cm

34
3.14in / 7.97cm 5.71in / 14.5cm
7.13in / 18.1cm
 PRODUCT GUIDE
TM
MOTOSERIES

8MOTO

6MOTO

69MOTO

SPECS WDX6MOTO WDX8MOTO WDX69MOTO

Structure 6.5” (16.5cm) Speaker 8” (20.3cm) Speaker 6x9”(15.2cm x 22.8cm) Speaker
Max power 350 Watts 500 Watts 500 Watts

STAMPSTEEL Nominal Power 150 Watts 250 Watts 250 Watts

Frequency Response 80Hz - 21KHz 75Hz - 21KHz 70Hz - 21KHz
FEATURES Master Carton 4 2 2
• High efficiency loudspeaker
• Ultra light weight treated cone
• High reaction ribbed treated surround
• 1” (25mm) high temperature voice coil Dimensions Mounting Depth Cutout Diameter
• Steel Stamped Basket
WDX6MOTO 2.56in / 6.5cm 5.63in / 14.3cm
• 1.25” (28mm) aluminum dome
tweeter with resonance chamber WDX8MOTO 2.9in / 7.5cm 7.12in / 18.1cm
• Protective grills included WDX69MOTO 2.81in / 7.15cm 6.02in x 8.77in / 15.3cm x 22.3cm

MESH GRILL

35 Images displayed are for illustration purposes only and may differ from actual photos 35
 PRODUCT GUIDE

TM

MOTOSERIES
DIECAST

FEATURES:
• High efficiency component system
COMPONENT SYSTEM
TM 69C-G2
• 6 x 9” Component loudspeakers
• Ultra light weight treated cone
• Hight reaction ribbed treated cloth surround
• 1.5” High temperature voice coil 500 WATTS
MAX POWER
• Stamped steel basket
• Radial voice coil benting
• Protective grill included
• Multi-mount tweeter flange
• 12dB Passive crossover network
• 1.25” Aluminum dome tweeter with resonance chamber

SPECS WDX69C-G2 Dimensions

Structure 6x9” Component
Max power 600 Watts
3.31” / 84.3mm
3” / 76.4mm

Nominal Power 300 Watts

Impedance 4Ω
Sensitivity 103.7dB
1.33” / 33.95mm
.89” / 22.8mm

2.245” / 57mm
Frequency Response 75Hz - 21KHz
Master Carton 2 4.7” / 120mm
8.7 x 6” / 223 x 154mm
9.37 x 6.49” / 238 x 165mm

CONTACT US: (877) 787-011

TM
36 www.dbdrive.net
 500 WATTS

PRODUCT GUIDE
TM

MOTOSERIES
DIECAST

FEATURES:
• High Efficiency Component System
• 6.5”(16.5cm) Component Loudspeakers MESH
GRILL
• Ultra Light Weight Paper Cone INCLUDED

• High Reaction Ribbed Surround

• 1”(25mm) High Temperature Voice Coil
• Die-Cast Aluminum Anti Resonance Basket
• 1.25”(28mm) Aluminum Dome Tweeter
with Resonance Chamber
• Multi-Mount Tweeter Flange
• 12dB Passive Crossover Network
• Protective Grills Included
COMPONENT SYSTEM
TM 65C
SPECS WDX65C Dimensions
Structure 6.5” (16.5cm) Component
Max power 500 Watts

2.42in / 6.1cm

1.30in / 3.3cm
Nominal Power 250 Watts
Impedance 4Ω
Sensitivity 103.5dB
Frequency Response 80Hz - 21KHz
6.16in / 16.4cm 2.24in / 5.7cm
Master Carton 2

TM 1TW-MOTO
FEATURES WDX1TW-MOTO
Structure 1.25” (2.8cm) Component Tweeters
Max power 225 Watts
Nominal Power 150 Watts
Impedance 4Ω
Sensitivity 101.4dB
Frequency Response 4KHz - 22.5KHz
Master Carton 30
Dimensions
FEATURES:
• 1.25” (28mm) High Efficiency • Surface and Flush mount application
Component Tweeters Hardware included
0.89in / 2.8cm

• Silk Surround with Aluminum Dome • 6db Passive Crossover Included

• Neo Magnet with Rear • Designed for High Output
Resonance Chamber • 1 Pair
2.24in / 5.7cm

Images displayed are for illustration purposes only and may differ from actual photos 37
 JEEP 65C-JP
PRODUCT GUIDE

6.5” Component Speakers

Loudspeakers

High
FIT Output PERFORMANCE

FEATURES
• 6.5” Component Speakers
• High-Efficiency 2-way Loudspeaker
• Ultra-Light Weight Paper Cone

500 WATTS
• High Reaction Cloth Ribbed Surround
• 1.5” High-Temperature Voice Coil
• Stamped Steel Basket
MAX POWER
• Plug & Play Harness Included

SPECS WDX65C-JP

2.631in/6.7cm
2.41in/6.1cm
Structure 6.5” (16.5cm) Component
Max power 500 Watts
Nominal Power 250 Watts 5.62in/14.3cm
Impedance 4Ω

0.82in/2.09cm
Sensitivity 93.9dB
Frequency Response 80Hz - 21KHz
2.03in/5.16cm
Master Carton 4
3.38in/8.6cm

Plug & Play Harness Included

65-JP
6.5” 2-Way Loudspeakers

High
350 WATTS
MAX POWER
FIT Output PERFORMANCE

SPECS WDX65-JP
FEATURES
Structure 6.5” (16.5cm) Loudspeaker
2.631in/6.7cm
2.41in/6.1cm

• 6.5” 2-Way Loudspeaker

Max power 350 Watts
• High-Efficiency 2-way Loudspeaker
• Ultra-Light Weight Paper Cone Nominal Power 150 Watts

5.62in/14.3cm • High Reaction Cloth Ribbed Surround Impedance 4Ω

• 1.5” High-Temperature Voice Coil Sensitivity 95.8dB
• Stamped Steel Basket Frequency Response 80Hz - 21KHz
• Plug & Play Harness Included
38 Master Carton 4
 120 WATTS 35-JP

PRODUCT GUIDE
MAX POWER
3.5” 2-Way Loudspeakers

SPECS WDX35-JP
Structure 3.5” (2.54cm) Loudspeaker

1.37in/3.5cm
Max power 120 Watts
Nominal Power 35 Watts
2.99in/7.6cm Impedance 4Ω
3.40in/8.65cm Sensitivity 85.6dB
Frequency Response 120Hz - 20KHz
High
FIT Output PERFORMANCE Master Carton

FEATURES 35MR-JP
• 3.5” 2-Way Loudspeaker
• High Efficiency 2-Way Loudspeaker 3.5” Midrange Loudspeaker
• Ultra-Light Weight Paper Cone

110 WATTS
• High Reaction Cloth Surround
• .75” High-Temperature Voice Coil
• Stamped Steel Basket
MAX POWER
• Plug & Play Harness Included

SPECS WDX35MR-JP
1.37in/3.5cm

Structure 3.5” (2.54cm) Midrange

Max power 110 Watts
Nominal Power 30 Watts
2.99in/7.6cm Impedance 4Ω
3.40in/8.65cm
Sensitivity 88.8dB
Frequency Response 120Hz - 20KHz
High Master Carton
FIT Output PERFORMANCE

Plug & Play Harness Included

OEM Compatible between 2007 to 2018 vehicles, will fit some 2019 - 2021 with minor modification.
Check with your Car Audio installation professional for exact fit specifications. 39
PRODUCT GUIDE

LOUDSPEAKERS

PTS65C MESH
6.5” (165.1mm) Component
GRILL
POLY-GRAPHITEBASKET INCLUDED

325 WATTS
MAX POWER

SPECS PTS65C SPEAKER: TWEETER:

Structure 6.5” (16.5cm) Component • Rubber Surround • 0.75” (19mm) Silk Dome Tweeter
Max power 325 Watts • Carbon Graphite Injection PP Cone • Neodymium Magnet
Nominal Power 110 Watts • 1.20”(30.48mm) Voice Coil
Impedance 2Ω • Ferrite Oxide Magnet
Sensitivity 93dB
+ 3dB
Frequency Response 40Hz - 22KHz
Musical
Master Carton 4 Advantage

CONTACT US: (877) 787-011

TM
40 www.dbdrive.net
 PRODUCT GUIDE
LOUDSPEAKERS

MESH
FEATURES:
GRILL
INCLUDED

• Neodymium Magnet
• Rubber Surround
• Carbon Graphite Injection PP Cone
• 1” (25mm) Voice Coil
• Ferrite Oxide Magnet

2 SILK
DOME TWEETER
OHMS
PTS69 3-Way Speaker
POLY-GRAPHITEBASKET

PTS46 2-Way Speaker

PTS57 2-Way Speaker

MESH
GRILL
INCLUDED

PTS65 2-Way Speaker

SPECS PTS46 PTS57 PTS65 PTS69

Structure 4x6” (10.1cm x 15.2cm) Speaker 5x7” (12.7cm x 17.7cm) Speaker 6.5” (16.5cm) Speaker 6x9” (15.2cm x 22.8cm) Speaker
Max power 180 Watts 300 Watts 300 Watts 350 Watts
Nominal Power 65 Watts 100 Watts 100 Watts 125 Watts
Impedance 2Ω 2Ω 2Ω 2Ω
Frequency Response 40Hz - 22KHz 40Hz - 22KHz 35Hz - 22KHz 35Hz - 23KHz
Master Carton 10 4 4 4

Images displayed are for illustration purposes only and may differ from actual photos 41
PRODUCT GUIDE

STAMPEDSTEEL

LOUDSPEAKERS
MESH
GRILL
INCLUDED

FEATURES
SPEAKER:
• Injection Polypropylene Cone
• Rubber Surround
• 1”(25mm) Voice Coil Diameter
• Ferrite Oxide Magnet

TWEETER:
• 1/2” (13mm) PEI Dome
• Neodymium Magnet

S6C Component System

MESH
GRILL
INCLUDED

S1T Aluminum Tweeter

S69P 4-Way Speaker

MESH S3T Aluminum Tweeter

GRILL
INCLUDED

S65 2-Way Speaker

S3.52-Way Speaker

CONTACT US: (877) 787-011

TM
42 www.dbdrive.net
 PRODUCT GUIDE
MESH
GRILL
INCLUDED

S4.0 2-Way Speaker

S65P 2-Way Speaker

S46 2-Way Speaker

S57 2-Way Speaker
MESH
GRILL
INCLUDED

S5.25 2-Way Speaker S69 4-Way Speaker

SPECS S1T S3T S3.5 S4.0 S46

Structure 1”(2.5cm) Tweeter 1.25”(2.8cm) Tweeter 3.5” (8.89cm) Speaker 4” (10.1cm) Speaker 4x6” (10.1cm x 15.2cm) Speaker
Max power 350 Watts 225 Watts 150 Watts 160 Watts 160 Watts
Nominal Power 75 Watts 150 Watts 40 Watts 55 Watts 55 Watts
Frequency Response 3.5KHz - 20KHz 4KHz - 22.5KHz 50Hz - 20KHz 45Hz - 20KHz 40Hz - 20KHz
Master Carton 24 50 12 10 12

SPECS S5.25 S57 S65 S65P

Structure 5.25” (13.3cm) Speaker 5x7” (12..7cm x 17.7cm) Speaker 6.5” (16.5cm) Speaker 6.5” (16.5cm) Speaker
Max power 275 Watts 300 Watts 300 Watts 350 Watts
Nominal Power 55 Watts 65 Watts 65 Watts 75 Watts
Frequency Response 40Hz - 20KHz 30Hz - 20KHz 40Hz - 20KHz 40Hz - 20KHz
Master Carton 8 6 6 6

SPECS S69 S69P

Structure 6x9” (15.2cm x 22.8cm) Speaker 6x9” (15.2cm x 22.8cm) Speaker
Max power 450 Watts 600 Watts
MESH
GRILL
Nominal Power 125 Watts 250 Watts
Frequency Response 35Hz - 21KHz 35Hz - 21KHz
Images
Master displayed are for illustration
Carton 4 purposes only and may differ from
4 actual photos
43
 S1 60v2
PRODUCT GUIDE

6.5” (16.5cm) DUAL CONE LOUDSPEAKERS

STAMPEDSTEEL

MESH
GRILL
INCLUDED

130 WATTS
SPECS S1 60v2
Structure 6.5” (16.5cm) Dual Cone Speaker
FEATURES: Max power 130 Watts MAX POWER
• Features: Nominal Power 40 Watts
• Dual Paper Cone
Impedance 4Ω
• Stamped Steel Basket
Sensitivity 89dB
• Ferric Oxide Magnet
• Cloth Surround Frequency Response 70Hz - 18KHz
• Grill included Master Carton 10

S1 65Cv2
6.5” (16.5cm) COMPONENT
STAMPEDSTEEL FEATURES S1 65Cv2
FEATURES: Structure 6.5” (16.5cm) Component
• Heavy Gauge Steel Stamped Basket Max power 250 Watts
• Aluminum Voice Coil Nominal Power 65 Watts
• Butyl Rubber Surround Impedance 4Ω
• TSD Coated Pressed Paper Cone Sensitivity 92dB
• Custom Embossed Grill Included Frequency Response 40Hz - 20KHz
Master Carton 6
WEETER
• 25mm. PEI Dome Tweeter

CROSSOVER MAX POWER

250 WATTS
• 12dB per Octave Passive
X-Over Network
MESH
GRILL
INCLUDED

44
44
 BASS ENHANCERS

PRODUCT GUIDE
DIGITAL BASS ENHANCER
TM
BE

FEATURES:
• Output Level: up to 13.5 Volt
• Dash Mountable Remote Control
• Frequency Response:
• PFM Subsonic Filter
10Hz - 25KHz Remote Bass Control
• Parametric Bass Equalization
• THD: 0.0015%
• Balanced RCA Inputs
• S/N Ratio: <133dB Master Carton
• PWM Power Supply
20
• Continuously Variable Bass Output Control

FEATURES:
E7 3X 3-WAY ELECTRONIC CROSSOVER
• Remote Bass Control Included
• Front & Rear High-Pass Crossover - 18dB/Octave,
Variable Frequency 35-400Hz, 20x Multiplier Option
• Sub Low-Pass Crossover
8 OUTPUT
• Double Sided PCP Board
• Three Stereo Outputs - 5Vms
• Output Level : 8 volts max
• Two Stereo Inputs with Parallel Input Option
Remote Bass Control
• Frequency Response : 10Hz - 50KHz - 3dB
Master Carton
• THD : 0.0015%
10

E5 BEv2 BASS ENHANCER

FEATURES:
• Dash Mountable Remote Control • Output Level: up to 13.5 Volt
• PFM Subsonic Filter • Frequency Response:
• Illuminated Controls 10Hz - 25KHz
• Illuminated Logo • THD: 0.0015% Dash Mountable
Remote Control
• Parametric Bass Equalization • S/N Ratio: <133dB
• Balanced RCA Inputs
• PWM Power Supply Master Carton
• Continuously Variable Bass Output Control 10

Images displayed are for illustration purposes only and may differ from actual photos 45
PRODUCT GUIDE

EQUALIZERS

E6 EQ7
7 BAND PARAMETRIC EQUALIZER
FEATURES:
• Active gain Equalizer with adjustable input sensitivity
• Master volume control with up to 7 Volts RMS of output
• Individual left and right sensitivity controls
• Seven band parametric equalizer with 12dB Boost
• Specific bandwidth for each band plus high frequency shelving
• On-board 30V bipolar switching power supply
7 OUTPUT
• Subwoofer level control
• Subwoofer frequency adjustable
• Input CD select switch Master Carton
• Night Illumination Design 10

SPEQ7 FEATURES:
• 7 Band graphic equalizer
7 BAND GRAPHIC EQUALIZER • 8 Volt line driver
• Rear panel auxiliary 2 channel RCA inputs with adjustable input gain
• Rear panel Front/Rear/Subwoofer RCA outputs
• Variable volume level control
• Variable subwoofer level control
• Adjustable fader control
• Selectable 12dB Low-pass crossover (60Hz or 90Hz)
• Dual illumination (Amber / Blue)
8 OUTPUT

Master Carton
DUAL ILLUMINATION 10

E7 EQ7 FEATURES:
• 7-band parametric equalizer with built in subwoofer x-over
• Seven Parametric Equalization Bands (50Hz, 125Hz, 315Hz,
7 BAND EQUALIZER
750Hz, 2.2kHz, 6KHz and 16kHz)

8
• Variable Subwoofer Output with Built-in 18dB per Octave
selectable at 60Hz or 90Hz
• Three stereo RCA outputs: front, rear, and subwoofer OUTPUT
• Volume Gain with up to 8 Volts of Output
• Auxiliary stereo RCA input on rear as well as a MP3 input on the front panel
• Variable subwoofer output control
• Master volume
• RCA configuration Master Carton
• Illuminated Controls 20

CONTACT US: (877) 787-011

TM
46 www.dbdrive.net
 PRODUCT GUIDE
EQUALIZERS

SPEQP FEATURES:
• Four Bands of Adjustable Parametric Stereo Equalization
4 BAND PARAMETRIC EQUALIZER • Volume Gain with up to 8 Volts of Output

8
• Variable Subwoofer Output Control
• Main AUX Input Selector
• Left and Right AUX Input Sensitivity Controls OUTPUT
• Gold Plated RCA Input Connectors
• Auxiliary stereo RCA input on rear as well as a MP3 input on the front panel
• Master volume
• RCA configuration
• Illuminated Controls Master Carton
• Balanced RCA Inputs 20

SPEQ
5 BAND EQUALIZER FEATURES:
• Five Bands of Stereo Equalization: 45Hz, 100Hz, 700Hz, 2kHz, & 15kHz
• Volume Gain with up to 8 Volts of Output
• Variable Subwoofer Output Control with Frequency Bandwidth Adjustment
• Main AUX Input Selector
• Left and Right AUX Input Sensitivity Controls
• Gold Plated RCA Input Connectors
Master Carton
20

SPEQ10BE
FEATURES:
• 5 Band Parametric Equalization
5 BAND PARAMETRIC EQUALIZER • (Sub-Low-Mid-Mid/High-High)
• Volume Gain with up to 8.5 Volts of Output
• Master Level Control
• Front and Rear Fader Control
• Subwoofer Output Level Control
• Adjustable Input Gains
• Battery Voltage Gauge
• Bass Enhancement Digital
• Processor with Level Control
• Aux RCA Rear Input
• 3.5mm Front Panel Aux Input Master Carton
• Selectable 60Hz or 80Hz Low Pass 20
Active Crossover
• Blue Illumination

Images displayed are for illustration purposes only and may differ from actual photos 47
PRODUCT GUIDE

NEOCAPACITORS
7.75in / 19.7cm NEOCAP5
5 FARAD DIGITAL CAPACITOR

FEATURES:
• 12-24 Volts DC
• Low E.S.R.
• Digital DC Volt Meter
• 0/4 Gauge Power Wire Inputs
• 0/4 Gauge Power Wire Outputs
• Increased Dynamic Sound Range of your amplifiers
• Reduces DC Voltage Spikes on your Vehicles
• Compact Size
COMPACT
SIZE
Master Carton
8
5.431in / 13.8cm
1.91in / 4.8cm

NEOCAP10 9.76in / 24.8cm

10 FARAD DIGITAL CAPACITOR

FEATURES:
COMPACT
SIZE
• 12-24 Volts DC
• Low E.S.R.
• Digital DC Volt Meter
• 0/4 Gauge Power Wire Inputs
• 0/4 Gauge Power Wire Outputs
• Increased Dynamic Sound Range of
your amplifiers
• Reduces DC Voltage Spikes on your Vehicles
5.431in / 13.8cm
• Compact Size
1.91in / 4.8cm

Master Carton
8

48
 PRODUCT GUIDE
TWEETERS

WDX2NB
1” HIGH OUTPUT PRO AUDIO NEO TWEETER

Dimensions

57mm SPECS WDX2NB

Voice Coil Size 1” (25.4 mm)
Max power 300 Watts
Nominal Power 150 Watts
Impedance 4Ω
58.60mm

Sensitivity 105 dB
Sold As Pair
32.60mm

Master Carton 12

57.30mm

Images displayed are for illustration purposes only and may differ from actual photos 49
 PRODUCT GUIDE

TM
1NTW
1.25” HIGH OUTPUT NEO TWEETER
TWEETERS

FEATURES:
• 1.25” (31.75mm) Voice Coil
• Diaphragm Material: Titanium
• Neodymium Magnet
• Fully Replaceable Tweeter Diaphragm
• Ultra Shallow Mounting design SOLD AS
• Aluminum Die-cast Waveguide Construction PAIR
• Includes 6dB Per Octave Crossover

Dimensions ULTRA SHALLOW SPECS WDX1NTW

MOUNT DESIGN Voice Coil Size 1.25” (31.75 mm)
Max power 300 Watts
Nominal Power 125 Watts
4 Impedance 4Ω
Sensitivity 104 dB
Sold As Pair
Master Carton 12
WDX1NTW RC RECONE FOR WDX1NTW

1.5NTW
1.5” HIGH OUTPUT PRO AUDIO NEO TWEETER SOLD AS
single
FEATURES:
• 1.5” (38.1mm) Voice Coil
• Phenolic Diaphragm
• Neodymium Magnet
• High Sensitivity
• Fully Replaceable Tweeter Diaphragm
• Aluminum Die-Cast Waveguide Construction
• Designed for Wide Dispersion Applications

Dimensions
SPECS WDX1.5NTW
Voice Coil Size 1.5” (38 mm)
Max power 350 Watts
Nominal Power 125 Watts
Impedance 8Ω
Sensitivity 106 dB
Sold As Single
Master Carton 24
WDX1.5NTW RC RECONE FOR WDX1.5NTW
50
 PRODUCT GUIDE
TWEETERS

P7TW 3D
350 WATTS
MAX
MAXPOWER
POWER
SOLD AS

SPECS
PAIR
P7TW 3D
FEATURES:
Voice Coil Size 1.5” (38mm)

2in/5.1cm
• High Efficiency Titanium diaphragm
Max power 350 Watts • Integrated 6db Passive
Nominal Power 170 Watts High Pass Crossover
Impedance 4Ω • Fully Replaceable Tweeter Diaphragm 2.99in/7.6cm
Sensitivity 103dB • Dispersion Ready Mesh Protective Grill
4in/10.2cm
• Direct Connect Speaker Terminals
Sold As Pair
• Die-cast Aluminum Construction INTEGRATED
Master Carton 12
• Shallow 2” (50mm) Mounting Depth HIGH PASS TITANIUM
PQ7RC REPLACEMENT DIAPHRAM • 1 Pair CROSSOVER DIAPHRAGM

3.38in/8.6cm
TWEETERS

P9TW 3D
375 WATTS
MAX POWER
1.53in/3.9cm

SOLD AS
SPECS P9TW 3D
Voice Coil Size 1.5” (38mm)
PAIR
FEATURES:
Max power 375 Watts
• High Efficiency Titanium diaphragm 2.99in/7.6cm
Nominal Power 175 Watts
• Integrated 6db Passive High Pass Crossover 4.48in/14.4cm
Impedance 4Ω
• Fully Replaceable Tweeter Diaphragm
Sensitivity 104dB INTEGRATED
• Dispersion Ready Mesh Protective Grill
Magnet Size 6 oz.
• Direct Connect Speaker Terminals HIGH PASS TITANIUM
CROSSOVER DIAPHRAGM
Sold As Pair • Die-cast Aluminum Construction
Master Carton 12 • Shallow 2” (50mm) Mounting Depth
PQ9RC REPLACEMENT DIAPHRAM • 1 Pair 51
PRODUCT GUIDE

TWEETERS

P7TW 3M
SOLD AS
PAIR
300 WATTS
MAX POWER
Mini
SPECS P7TW 3M
Dimensions Voice Coil Size 1.75” (44.45mm)
Max power 300 Watts
2.63in / 67mm
Nominal Power 125 Watts
Impedance 4Ω
Sensitivity 105dB
1.35in / 34.5mm

Magnet Size 6 oz.

Sold As Pair
ULTRA SHALLOW Master Carton 12
MOUNT DESIGN P7TW3MRC REPLACEMENT DIAPHRAM
2.28in / 58mm

TWEETERS SOLD AS

P9TW 3M PAIR

320 WATTS
MAX POWER Mini
Dispersion Ready Mesh Protective Grill SPECS P9TW 3M
Dimensions Voice Coil Size 1.75” (44.45mm)
3.18in / 81mm Max power 320 Watts
Nominal Power 130 Watts
Impedance 4Ω
1.47in / 36mm

Sensitivity 105dB
Magnet Size 6 oz.
Sold As Pair
12
ULTRA SHALLOW Master Carton

52 MOUNT DESIGN
 PRODUCT GUIDE
SOLD AS
single

TWEETERS

P5TW 1D
SOLD AS
PAIR

P5TW 3D

SOLD AS
single

P5TW 4D

DB Drive ProAudio tweeters are extremely efficient high frequency loud speakers. They are highly recommended in audio systems
designed for vehicle street parties. Pro Audio tweeters offer controlled high frequency dispersion which is ideal for high volume out-
put. If you like it loud, go Pro Audio.

SPECS P5TW 1D P5TW 3D P5TW 4D

Voice Coil Size 1” (25mm) Voice Coil 1” (25mm) Voice Coil 1.75” (44mm) Voice Coil
Max power 300 Watts 300 Watts 300 Watts
Nominal Power 150 Watts 150 Watts 170 Watts
Sensitivity 101 dB 101 dB 103 dB
Impedance 4Ω 4Ω 4Ω
Magnet Size 8 oz. 5.4 oz. 11.6 oz.
Sold As Single Pair Single
Master Carton 18 12 8
REPLACEMENT DIAPHRAM PQ1RC PQ4RC

Images displayed are for illustration purposes only and may differ from actual photos 53
 SOLD AS
PRODUCT GUIDE
single

TWEETERS

SOLD AS
PAIR
P5TW 5D

SOLD AS
ALUMINUM
DIAPHRAGM
PAIR

P5TW 7D
REPLACEMENT DIAPHRAM
PQ1RC P5TW 1D Replacement Diaphragm
PQ3RC P5TW 3D/P5TW 7D/P5TW 8D Replacement Diaphragm
PQ4RC P5TW 1D Replacement Diaphragm
PQ5RC P5TW 1D Replacement Diaphragm
P5TW 8D
DB Drive ProAudio tweeters are extremely efficient high frequency loud speakers. They are highly recommended in audio systems
designed for vehicle street parties. Pro Audio tweeters offer controlled high frequency dispersion which is ideal for high volume
output. If you like it loud, go Pro Audio.

SPECS P5TW 5D P5TW 7D P5TW 8D

Voice Coil Size 1.75” (44mm) Voice Coil 1” (25mm) Voice Coil 1” (25mm) Voice Coil
Max power 300 Watts 350 Watts 300 Watts
Nominal Power 100 Watts 150 Watts 150 Watts
Sensitivity 101 dB 101 dB 101 dB
Impedance 4Ω 4Ω 4Ω
Magnet Size 11.6 oz. 5.4 oz. 5.4 oz.
Sold As Single Pair Pair
Master Carton 24 12 12

CONTACT US: (877) 787-011

TM
54 www.dbdrive.net
 PRODUCT GUIDE
SOLD AS
TWEETERS
PAIR
P5TW8D-ST
350 WATTS
MAX POWER

SPECS P5TW8D-ST
Dimensions
Voice Coil Size 1“ (25mm) Voice Coil
3.93in / 100mm Max power 350 Watts
Nominal Power 150 Watts
Impedance 4Ω
1.57in / 40mm

4
Sensitivity 103.3dB
Frequency Response 1.8KHz - 20KHz

OHMS Sold As Pair

Master Carton 12
2.75in / 70mm

HORN & COMPRESSION DRIVERS

P7CDT1.0
Dimensions 200 WATTS
MAX POWER

PLASTICHORN

SPECS P7CDT1.0
SOLD AS
Pro Audio Horn & Driver
PAIR Structure
4.13in / 105mm

Max power 200 Watts

FEATURES: Nominal Power 100 Watts

• Bi-radial Horn Tweeter Design Impedance 8Ω
• Extended Frequency Response Sensitivity 108dB
• High Efficiency Magnet Size 10 oz.
• Wide Dispersion Horn Lens Master Carton 6
P7CDT1.0RC REPLACEMENT DIAPHRAM

3.58in / 90.33mm
Images displayed are for illustration purposes only and may differ from actual photos 55
 PRODUCT GUIDE

HORN & COMPRESSION DRIVERS PLASTICHORN

18 TPI

PBRH3 PBRH5 PBRH6

FEATURES:
Dimensions Width Length Height Master Carton • Bi-radial Proprietary Horn Design
• Rigid Plastic polymer Wide Dispersion
PBRH6 6.1in / 155mm 6.1in / 155mm 5.9in / 149mm 12 • Machined Metal Thread Inserts for maximum
PBRH5 5.98in / 152mm 5.98in / 152mm 2.75in / 70mm 18 Strength and reliability
PBRH3 3.66in / 93mm 3.66in / 93mm 2in / 51mm 40 • 1 3/8”(35mm) - 18 TPI Universal fit
• 1 Piece per box

COMPRESSION DRIVERS

SPECS P7CDT1.4 P7CDT1.75

Voice Coil Size 1.4” (35.5mm) Voice Coil 1.75” (44mm) Voice Coil
Max power 300 Watts 500 Watts
Nominal Power 125 Watts 150 Watts
Impedance 8Ω 8Ω
Sensitivity 102dB 104dB
Magnet Size 16.5 oz. 22 oz.
* Image of Compression Master Carton 12 6
Driver with Horn
REPLACEMENT
P7CDT1.4RC P7CDT1.75RC
DIAPHRAM
Horns Sold Separately

CONTACT US: (877) 787-011

TM
56 www.dbdrive.net
 FEATURES:

PRODUCT GUIDE
• 3” (75mm) Voice Coil • Uses 2” 4 Bolt to secure to P9TWSH
• 1.4” Exit Throat or P9TWSL Aluminum Waveguide
• Titanium Diaphragm (sold seperately)
• Phenolic Diaphragm ( P9TW3NPH ) • Designed for wide dispersion high
Radial Neodymium Magnet Assembly frequency applications
• High Sensitivity

NEO
COMPRESSION
DRIVER

SPECS P9TW2NCD P9TW3NCD P9TW3NPH

Voice Coil Size 3” (75mm) Voice Coil 3” (75mm) Voice Coil 3” (75mm) Voice Coil
Max power 250 Watts 350 Watts 350 Watts
Nominal Power 85 Watts 100 Watts 100 Watts
Impedance 8Ω 8Ω 8Ω
Sensitivity 112dB 110dB 110dB
Master Carton 4 4 4

REPLACEMENT
P9TW2NCD RC P9TW3NCD RC P9TW3NPH RC
DIAPHRAM

ALLUMINUMHORN

Cast Aluminum 45 x 45 | Conical Waveguide Horns P9TWLH

FEATURES: LONG
• 2” Cast Aluminum 45 x 45 Conical Waveguide Horn
• 4 Bolt Mounting
• Enhanced for Mid to High Frequency Reproduction

P9TWSH
SHORT

SPECS P9TWLH P9TWSH

Throat Diameter 2” (50.8mm) 2” (50.8mm)
Frequency Capacity 600Hz 800Hz
Master Carton 12 12

Images displayed are for illustration purposes only and may differ from actual photos 57
 PRODUCT GUIDE

9 SERIES MID-BASS TM

DIECAST

SOLD AS
single

600 WATTS MAX POWER

4 4

SPECIFICATIONS WDX9MB10 WDX9MB10-8 WDX9MB12 WDX9MB12-8

Application 10” MID - BASS SPEAKER 10” MID - BASS SPEAKER 12” MID - BASS SPEAKER 12” MID - BASS SPEAKER
Nominal Basket Size 10.3” (262 mm) 10.3” (262 mm) 12.4” (315 mm) 12.4” (315 mm)
Mounting Depth 4.3” (109.5 mm) 4.3” (109.5 mm) 4.7” (119.5 mm) 4.7” (119.5 mm)
Nominal Impedence 4Ω 8Ω 4Ω 8Ω
RMS Watts 300 W 300 W 400 W 400 W
Music Program Watts 500 W 500 W 600 W 600 W
Voice Coil Diameter 2.5” / 63.5 mm 2.5” / 63.5 mm 2.5” / 63.5 mm 2.5” / 63.5 mm
Cone Material Paper Paper Paper Paper
Cone Edge Cloth Cloth Cloth Cloth
Basket Type Die Cast Die Cast Die Cast Die Cast
Sensitivity @ 1W/1M 106.1 106.1 106.1 106.1
Resonant Frequency (fs) 57.1 Hz 55.7 Hz 37.7 Hz 38.8Hz
DC resistance (Re) 3.2 Ω 5.9 Ω 3.2 Ω 5.9 Ω
Mechanical Q (QMS) 13.06 6.57 8.89 4.48
Electromagnetic Q (QES) 0.39 0.47 0.28 0.35
Total Q (QTS) 0.38 0.43 0.27 0.32
Compliance Volume (Vas) 31.2 ltr 40.0 ltr 92.6 ltr 114.1 ltr
Mech Compliance of Suspenion (CMS) 0.19 mm/N 0.24 mm/N 0.22 mm/N 0.28 mm/N
BL Product (BL) 11.1 N/A 12.3 N/A 14.6 N/A 15.8 N/A
Diaphram Mass inc. Airload (Mms) 41.8 grams 34.4 grams 79.7 grams 60.9 grams
Recone kit part number WDX9MB10-RC WDX9MB10-8RC WDX9MB12-RC WDX9MB12-8RC

CONTACT US: (877) 787-011

TM
58 www.dbdrive.net
 PRODUCT GUIDE
8 SERIES NEO MID-RANGE TM

DIECAST

500 WATTS MAX POWER

SPECIFICATIONS WDX8MR6N
Application 6.5” MID - RANGE SPEAKER
Nominal Basket Size 6.5” (164.50 mm)
Mounting Depth 2.5” (64.10 mm)
Nominal Impedence 4Ω
RMS Watts 250 W SOLD AS
4
Music Program Watts 500 W single
Voice Coil Diameter 2.5” / 63.5 mm
Cone Material Paper
Cone Edge Cloth
Basket Type Die Cast
Sensitivity @ 1W/1M 92.2
WDX8MR6N SPL FREQUENCY RESPONSE
Resonant Frequency (fs) 65.2 Hz
DC resistance (Re) 3.2
Mechanical Q (QMS) 7.43
Electromagnetic Q (QES) 0.38
Total Q (QTS) 0.37
Compliance Volume (Vas) 15.0 ltr
Mech Compliance of Suspenion (CMS) 0.61 mm/N
BL Product (BL) 5.8 N/A
Diaphram Mass inc. Airload (Mms) 9.8 grams
Recone kit part number WDX8MR6N-RC

Images displayed are for illustration purposes only and may differ from actual photos 59
PRODUCT GUIDE

TM
8 SERIES MID-BASS
STAMPEDSTEEL

SOLD AS
single

4 4

SPECIFICATIONS WDX8MB6 WDX8MB6-8 WDX8MB8 WDX8MB8-8

Application 6.5” MID - BASS 6.5” MID - BASS 8” MID - BASS 8” MID - BASS
Nominal Basket Size 6.59” (167.40 mm) 6.59” (167.40 mm) 8.2” (209 mm) 8.2” (209 mm)
Mounting Depth 2.57” (65.40 mm) 2.57” (65.40 mm) 3.18” (81 mm ) 3.18” (81 mm )
Nominal Impedence 4Ω 8Ω 4Ω 8Ω
RMS Watts 250 W 250 W 300 W 300 W
Music Program Watts 400W 400W 500W 500W
Voice Coil Diameter 1.5” / 38.1 mm 1.5” / 38.1 mm 1.5” / 38.1 mm 1.5” / 38.1 mm
Cone Material Paper Paper Paper Paper
Cone Edge Cloth Cloth Cloth Cloth
Basket Type Stamped Steel Stamped Steel Stamped Steel Stamped Steel
Sensitivity @ 1W/1M 99.2 99.2 99.7 99.7
Resonant Frequency (fs) 99.3 Hz 92.7 Hz 70.2 Hz 71.8 Hz
DC resistance (Re) 3.2 Ω 5.8 Ω 3.2 Ω 5.8 Ω
Mechanical Q (QMS) 10 4.98 10.54 5.14
Electromagnetic Q (QES) 0.54 0.54 0.36 0.41
Total Q (QTS) 0.51 0.49 0.35 0.38
Compliance Volume (Vas) 3.9 ltr 5.1 ltr 14.7 ltr 16.6 ltr
Mech Compliance of Suspenion (CMS) 0.15 mm/N 0.19 mm/N 0.20 mm/N 0.23mm/N
BL Product (BL) 8.0 N/A 9.7 N/A 9.9 N/A 11.6 N/A
Diaphram Mass inc. Airload (Mms) 17.2 grams 15.3 grams 25.2 grams 21.3 grams
Recone kit part number WDX8MB6-RC WDX8MB6-8RC WDX8MB8-RC WDX8MB8-8RC

CONTACT US: (877) 787-011

TM
60 www.dbdrive.net
 PRODUCT GUIDE
TM
7 SERIES MID-RANGE
STAMPEDSTEEL

SOLD AS
single

4 4 4

FEATURES WDX7MR6 WDX7MR6-8 WDX7MR8 WDX7MR8-8 WDX7MR10 WDX7MR10-8

Application 6.5” MID - RANGE 6.5” MID - RANGE 8” MID - RANGE 8” MID - RANGE 10” MID - RANGE 10” MID - RANGE
Nominal Basket Size 6.59” (167.4 mm) 6.59” (167.4 mm) 8.22” (209 mm) 8.22” (209 mm) 10” (256 mm) 10” (256 mm)
Mounting Depth 2.27” (57.8 mm) 2.27” (57.8 mm) 3.05” (77.60 mm) 3.05” (77.60 mm) 3.8” (97 mm) 3.8” (97 mm)
Nominal Impedence 4Ω 8Ω 4Ω 8Ω 4Ω 8Ω
RMS Watts 200 W 200 W 250 W 250 W 300 W 300 W
Music Program Watts 325 W 325 W 375 W 375 W 400 W 400 W
Voice Coil Diameter 1.5” / 38.1 mm 1.5” / 38.1 mm 1.5” / 38.1 mm 1.5” / 38.1 mm 2” / 50.8 mm 2” / 50.8 mm
Cone Material Paper Paper Paper Paper Paper Paper
Cone Edge Cloth Cloth Cloth Cloth Cloth Cloth
Basket Type Stamped Steel Stamped Steel Stamped Steel Stamped Steel Stamped Steel Stamped Steel
Sensitivity @ 1W/1M 97.2 90.8 98.2 98.2 101.3 101.3
Resonant Frequency (fs) 78.3 Hz 90.8 Hz 68.6Hz 71.1Hz 63.1 Hz 52.9 Hz
DC resistance (Re) 3.2 Ω 5.8 Ω 3.2 Ω 5.8 Ω 3.2 Ω 5.8Ω
Mechanical Q (QMS) 8.85 4.96 10.15 5.48 12.67 2.02
Electromagnetic Q (QES) 0.76 0.78 0.57 0.59 0.56 0.39
Total Q (QTS) 0.70 0.67 0.54 0.53 0.54 0.33
Compliance Volume (Vas) 8.4 ltr 8.4 ltr 18.2 ltr 19.2 ltr 31.8 ltr 39.7 ltr
Mech Compliance of Suspenion (CMS) 0.32 mm/N 0.32 mm/N 0.24 mm/N 0.25 mm/N 0.17 mm/N 0.22 mm/N
BL Product (BL) 5.2 N/A 6.4 N/A 7.4 N/A 9.3 N/A 9.1 N/A 14.4 N/A
Diaphram Mass inc. Airload (Mms) 12.9 grams 9.5 grams 22.4 grams 19.7 grams 36.9 grams 42.0 grams
Recone kit part number WDX7MR6-RC WDX7MR6-8RC WDX7MR8-RC WDX7MR8-8RC WDX7MR10-RC WDX7MR10-8RC

Images displayed are for illustration purposes only and may differ from actual photos 61
PRODUCT GUIDE

P6MSeries
FEATURES:
• Voice Coil CCAW
STAMPEDSTEEL • KSV Coil
• Ferrite Magnet
• Stamped Steel Basket
• Paper Cone
• Cloth Edge Cone

SOLD AS
single

4 4

SPECIFICATIONS P6M10 MB P6M10MB-8 P6M12 MB P6M12MB-8

Application 10” MID - BASS 10” MID - BASS 12” MID - BASS 12” MID - BASS
Nominal Basket Size 10.11” (267 mm) 10.11” (267 mm) 12.24” (311 mm) 12.24” (311 mm)
Mounting Depth 4.2” (107.00 mm) 4.2” (107.00 mm) 4.8” (122.00 mm ) 4.8” (122.00 mm )
Nominal Impedence 4Ω 8Ω 4Ω 8Ω
RMS Watts 350W 350W 400 W 400 W
Music Program Watts 700W 700W 800 W 800 W
Voice Coil Diameter 2.5” / 63.5 mm 2.5” / 63.5 mm 2.5” / 63.5 mm 2.5” / 63.5 mm
Cone Material Paper Paper Paper Paper
Cone Edge Cloth Cloth Cloth Cloth
Basket Type Stamped Steel Stamped Steel Stamped Steel Stamped Steel
Sensitivity @ 1W/1M 94.6 dB 94.6 dB 94.8 dB 94.8 dB
Resonant Frequency (fs) 69.8 Hz 56 Hz 59.7 Hz 47.8 Hz
DC resistance (Re) 3.2 Ω 5.8 Ω 3.2 Ω 5.8 Ω
Mechanical Q (QMS) 7.57 10.27 8.23 10.61
Electromagnetic Q (QES) 0.47 0.41 0.57 0.50
Total Q (QTS) 0.44 0.39 0.53 0.48
Compliance Volume (Vas) 26.1 ltr 48.5 ltr 53.1 Ltr 122 Ltr
Mech Compliance of Suspenion (CMS) 0.16 mm/N 0.29 mm/N 0.13 mm/N 0.31 mm/N
BL Product (BL) 10.0 N/A 11.8 N/A 10.6 N/A 11.2N/A
Diaphram Mass inc. Airload (Mms) 33.5 grams 28 grams 52.7 grams 35.7 grams
Recone kit part number P6M10MB RC P6M10MB-8RC P6M12MB RC P6M12MB-8RC

CONTACT US: (877) 787-011

TM
62 www.dbdrive.net
 P5M6NEO

PRODUCT GUIDE
MID-RANGE
6.5” NEO MID-RANGE
STAMPEDSTEEL

SOLD AS
single

SPECS P5M 6NEO

MESH FEATURES:
GRILL • Voice Coil Copper Wire
Application 6.5” MID-RANGE INCLUDED

Nominal Basket Size 6.57” (167 mm) • Polyimide Coil

Mounting Depth 2.24” (57 mm ) • Neodynium Magnet
Nominal Impedence 4Ω • Stamped Steel Basket
RMS Watts 150 W • Paper Cone
Music Program Watts 400 W • Cloth Edge Cone
Voice Coil Diameter 1.5” / 38.1 mm
P5M 6NEO FREQUENCY RESPONSE
Cone Material Paper
Cone Edge Cloth
Basket Type Stamped Steel
Sensitivity @ 1W/1M 95.6 dB
Resonant Frequency (fs) 125.5 Hz
DC resistance (Re) 3.2 Ω
Mechanical Q (QMS) 7.02
Electromagnetic Q (QES) 0.38
Total Q (QTS) 036
Compliance Volume (Vas) 4.5 Itr
Mech Compliance of Suspenion (CMS) 0.18 mm/N
BL Product (BL) 7.8 N/A
Diaphram Mass inc. Airload (Mms) 9.1 Grams

Images displayed are for illustration purposes only and may differ from actual photos 63
 P5M8NEO
PRODUCT GUIDE

MID-RANGE
8” NEO MID-RANGE
STAMPEDSTEEL

SOLD AS
single

MESH FEATURES:
GRILL • Voice Coil Copper Wire
SPECS P5M 8NEO
INCLUDED

8” MID - BASS • Polyimide Coil

Application 8” MID-RANGE • Neodynium Magnet
Nominal Basket Size 8.23” (209 mm) • Stamped Steel Basket
Mounting Depth 2.36” (60 mm) • Paper Cone
Nominal Impedence 4Ω • Cloth Edge Cone
RMS Watts 150 W
Music Program Watts 450 W P5M 8NEO FREQUENCY RESPONSE

Voice Coil Diameter 1.5” / 38.1 mm

Cone Material Paper
Cone Edge Cloth
Basket Type Stamped Steel
Sensitivity @ 1W/1M 101 dB
Resonant Frequency (fs) 112.0 Hz
DC resistance (Re) 3.2 Ω
Mechanical Q (QMS) 9.29
Electromagnetic Q (QES) 0.56
Total Q (QTS) 0.53
Compliance Volume (Vas) 8.6 ltr
Mech Compliance of Suspenion (CMS) 0.13 mm/N
BL Product (BL) 7.8 N/A
Diaphram Mass inc. Airload (Mms) 15.1 Grams

CONTACT US: (877) 787-011

TM
64 www.dbdrive.net
 PRODUCT GUIDE
SOLD AS
MID-RANGE SINGLE

P4MSERIES
STAMPEDSTEEL

FEATURES:
• High Efficiency ProAudio Mid-Range
• Shallow Mount Application
• Cloth Edge Surround
• 1.5” (38mm) High Temperature Voice Coil
• Steel Stamped Basket
SPECS P4M 6C P4M 8C
• Barium Ferrite Magnet
Size 6.5” (16.5cm) Pro Mid 8” (20.3cm) Pro Mid

4 MESH Max power 275 Watts 325 Watts

GRILL
INCLUDED Nominal Power 150 Watts 200 Watts
Impedance 4Ω 4Ω
Sensitivity 92.2 dB 97.9 dB
Magnet Barium Ferrite Barium Ferrite
Sold As Single Single
Master Carton 6 6

SOLD AS
MID-RANGE
SINGLE
DIECAST
MESH
GRILL
INCLUDED

SHALLOW
MOUNT DESIGN

SPECS P3M 6C P3M 8C

Size
Max power
6.5” (16.5cm) Pro Mid 8”(20.3cm) Pro Mid
225 Watts 275 Watts
P3MSERIES
FEATURES:
Nominal Power 135 Watts 135 Watts
• High Efficiency Pro Audio Mid-Range
Impedance 8Ω 8Ω • Shallow Mount Application
Sensitivity 105 dB 106 dB • Cloth Edge Surround
Magnet Barium Ferrite Barium Ferrite • 1.5” (38mm) High Temperature Voice Coil
• Die Cast Aluminum Basket
Sold As Single Single
• Barium Ferrite Magnet
Master Carton 8 6

DIECAST DIECAST STAMPEDSTEEL 8

Images displayed are for illustration purposes only and may differ from actual photos OHMS 65
PRODUCT GUIDE

MID-RANGE

SOLD AS
SINGLE

P4MSB
SERIES
FEATURES:
• Sealed Back Loudspeaker
4 • 4 ohms
• 1.0” (25mm) Voice Coil
• High Efficiency Paper Cone
• Integrated protective grill

SEALED
BACK
LOUDSPEAKER

P4M 4SB P4M 6SB P4M 8SB

SizeSPECS 4” (10.1cm) Sealed Back Loudspeaker 6.5” (16.5cm) Sealed Back Loudspeaker 8” (20.3cm) Sealed Back Loudspeaker
Max power 250 Watts 275 Watts 325 Watts
Nominal Power 100 Watts 150 Watts 200 Watts
Impedance 4Ω 4Ω 4Ω
Sensitivity 95 dB 94 dB 94 dB
Magnet Barium Ferrite Barium Ferrite Barium Ferrite
Sold As Single Single Single
Master Carton 20 6 6

CONTACT US: (877) 787-011

TM
66 www.dbdrive.net
 PRODUCT GUIDE
SOLD AS
PAIR MESH
MID-RANGE GRILL
INCLUDED

P2MB6PR4
STAMPEDSTEEL
FEATURES:
SPECS P2MB 6PR4
• High Efficiency ProAudio Mid-Range
Structure 6.5” (165mm) Pro Mid
• Shallow Mount Application
• Tri - Ribbed Cloth Surround Max power 225 Watts
• 1.5” (38mm) High Temperature Voice Coil Nominal Power 125 Watts
• Steel Stamped Basket Impedance 4Ω
• Barium Ferrite Magnet Sensitivity 99.4dB
Resonant Frequency 151Hz

225 WATTS
Sold As Pair
Master Carton 6
MAX POWER
4

P2MB6PR8
STAMPEDSTEEL

FEATURES:
• High Efficiency ProAudio Mid-Range
MID-RANGE • Shallow Mount Application
• Tri - Ribbed Cloth Surround
MESH • 1.5” (38mm) High Temperature Voice Coil
GRILL SOLD AS • Steel Stamped Basket
INCLUDED
PAIR • Barium Ferrite Magnet

8
OHMS

SPECS P2MB 6PR8

Structure 6.5” (165mm) Pro Mid
Max power 225 Watts
Nominal Power 125 Watts

225 WATTS
Impedance 8Ω
Sensitivity 99.4dB
MAX POWER Resonant Frequency 151Hz
Sold As Pair
Master Carton 6

Images displayed are for illustration purposes only and may differ from actual photos 67
 PRODUCT GUIDE

COMPONENT

500 WATTS
MAX POWER

P76K
STAMPEDSTEEL

2 MIDS SOLD AS
2 TWEETERS
2 CROSSOVERS
KIT
FEATURES:
• High Efficiency ProAudio Mid-Range
• Shallow Mount Application
• Cloth Edge Surround
• 1.5” (38mm) High Temperature Voice Coil
• Steel Stamped Basket
• 1”(25mm) Aluminum Pro Audio Tweeter
8
• 12dB per Octave Passive X-Over Network OHMS

MESH SPECS P7 6K
GRILL
INCLUDED Structure 6.5”(16.5cm) Pro Component
Max power 500 Watts
Nominal Power 200 Watts
Impedance 8Ω
Sensitivity 104dB
Magnet Barium Ferrite
Sold As Kit
Master Carton 2

CONTACT US: (877) 787-011

TM
68 www.dbdrive.net
 PRODUCT GUIDE
COMPONENT 2 MIDS SOLD AS
2 TWEETERS
2 CROSSOVERS KIT

275 WATTS
MAX POWER

SHALLOW
MOUNT DESIGN

P36K
DIECAST
FEATURES:
• High Efficiency ProAudio Mid-Range
• Shallow Mount Application
• Cloth Edge Surround
• 1.5” (38mm) High Temperature Voice Coil
• Die Cast Aluminum Basket
• 1” (25mm) Aluminum Pro Audio Tweeter 8
• 12dB per Octave Passive X-Over Network OHMS

MESH SPECS P3 6K
GRILL
INCLUDED Structure 6.5” (16.5cm) Pro Component
Max power 275 Watts
Nominal Power 175 Watts
Impedance 8Ω
Sensitivity 105dB
Magnet Barium Ferrite
Sold As Kit
Master Carton 2

Images displayed are for illustration purposes only and may differ from actual photos 69
 2 MIDS
PRODUCT GUIDE

SOLD AS
2 TWEETERS
COMPONENT 2 CROSSOVERS KIT

300 WATTS
MAX POWER

SHALLOW
MOUNT DESIGN P38K
DIECAST
FEATURES:
• High Efficiency ProAudio Mid-Range
• Shallow Mount Application
• Cloth Edge Surround
• 1.5” (38mm) High Temperature Voice Coil
• Die Cast Aluminum Basket
• 1” (25mm) Aluminum Pro Audio Tweeter
• 12dB per Octave Passive X-Over Network

8
OHMS

P3 8K

SPECS P3 8K
Structure 8” (20.3cm) Pro Component MESH
Max power 300 Watts GRILL
INCLUDED
Nominal Power 175 Watts
Impedance 8Ω
Sensitivity 106dB
Magnet Barium Ferrite
Sold As Kit
Master Carton 2

CONTACT US: (877) 787-011

TM
70 www.dbdrive.net
 P34M6K

PRODUCT GUIDE
DIECAST
COMPONENT

SOLD AS 4 MIDS
2 TWEETERS
KIT 2 CROSSOVERS

FEATURES:
• Ultra High Efficiency Pro Audio 6.5” Component
• Anti-Resonance Die Cast Aluminum Basket
• Shallow Mount Application
• Paper cone with Cloth Edge Accordion Surround
• Custom Embossed Protective Grill
SHALLOW
• 1” (25mm) Aluminum Dome Pro Tweeter MOUNT DESIGN
• 12db Passive X-Over network

4
OHMS

500 WATTS
MAX POWER

SPECS P3 4M6K
Structure 6.5” (165mm) Pro Component MESH
Max power 500 Watts GRILL
INCLUDED
Nominal Power 250 Watts
Impedance 4Ω
Sensitivity 105dB
Frequency Response +/-3dB 78Hz - 22KHz
Sold As Kit
Master Carton 4

Images displayed are for illustration purposes only and may differ from actual photos 71
 PRODUCT GUIDE

COMPONENT

500 WATTS
MAX POWER

SOLD AS 4 MIDS
KIT 2 TWEETERS

PRO6K4M
STAMPEDSTEEL

FEATURES:
• High Efficiency
• Paper Cone
• Bi- Ribbed Cloth Surround
• Frequency Response
Range 155Hz – 18,000Hz
• 6 db High Pass Capacitors 4
Included for Tweeters OHMS

SPECS PRO 6K4M

Structure 6.5” (16.5cm) Dual Component MESH
Max power 500 Watts
GRILL
INCLUDED

Nominal Power 225 Watts

Impedance 4Ω
Sensitivity 99.3dB
Magnet Barium Ferrite
Sold As Kit
Master Carton 2

CONTACT US: (877) 787-011

TM
72 www.dbdrive.net
 PRODUCT GUIDE
COMPONENT

250 WATTS
MAX POWER

PRO6KSTAMPEDSTEEL

FEATURES:
• High Efficiency
• Paper Cone
• Bi- Ribbed Cloth Surround

4
• Frequency Response Range 155Hz – 18,000Hz
• 6 db High Pass Capacitors
OHMS Included for Tweeters

SPECS PRO 6K
Structure 6.5” (16.5cm) Dual Component MESH
250 Watts
GRILL
Max power INCLUDED

Nominal Power 150 Watts

Impedance 4Ω
Sensitivity 103.3dB
Magnet Barium Ferrite
Sold As Kit
Master Carton 2

Images displayed are for illustration purposes only and may differ from actual photos 73
PRODUCT GUIDE

COMPONENT

PRO6K4MT
STAMPEDSTEEL

FEATURES:
• High Efficiency
• Paper Cone
• Bi- Ribbed Cloth Surround
• Steel Stamped Basket
• Barium Ferrite Magnet
• 1” Aluminum Pro Audio Tweeters

500 WATTS
MAX POWER

SOLD AS 4 MIDS
KIT 4 TWEETERS

CONTACT US: (877) 787-011

TM
74 www.dbdrive.net
 PRODUCT GUIDE
COMPONENT

4
OHMS

MESH
GRILL
INCLUDED

SPECS PRO 6K4MT

Structure 6.5” (16.5cm) Dual Component
Max power 500 Watts
Nominal Power 225 Watts
Sensitivity 99.3dB
Frequency Response 155Hz - 18KHz
Impedance 4Ω
Resonant Frequency 151Hz
Master Carton 2

75
 TM

302 Hanmore Industrial Parkway/Harlingen, TX 78550

Toll Free: (877) 787-0101 Fax: (956) 421-4513
contact us at: [email protected]
Tech Support: [email protected]
Printed in China 8 11536 03782 4
DCAT23A