Digital Clamp Meters

CMP-401 / 400
index: WMGBCMP401 / WMGBCMP400

Measure wide range

of electrical parameters

Measurement functions
• AC current measurement up to 400 A
• CMP-401 | DC current measurement up to 400 A
• DC and AC voltage measurement up to 600 V
• resistance measurement
• continuity test with acoustic signalling (beeper)
for resistance below 50 Ω
• temperature measurement (Fahrenheit or Celsius)
• frequency measurement
• CMP-401 | capacitance measurement
• diode test

Overview
Sonel CMP-401 and CMP-400 Clamp Meters are designed
to hard work in arduous measuring conditions. A special
housing, covered with an elastomer coating, provides pro-
tection against drops and mechanical damages. CMP-401
and CMP-400 are the first choice for those who expect the de-
vice to be reliable at work in industrial and residential environ-
ments.

Designed for specialists

• industrial and commercial electricians
• plant maintenance
• facility maintenance
• electrical contractors
• utility technicians
• HVACR specialists

page 1 / 3 sonel.com
 Special features
• non-contact neon lamp
• safe, insulated measurement clamp
• reinforced, impact resistant enclosure
• automatic selection of ranges with the capability of switching over
to the manual selection mode
• HOLD function, allowing for freezing the result on the display
• large and easy to read LCD display with backlit
• relative measurement function
• indication of range overflow

Faciliating the measurements

The AC-16 adapter expands the application of the clamp meter. With the ratio
x1 and x10, 230 V AC of voltage and max 16 A of current, the adapter can be
applied with any type of clamp meter.

CMP-401 | DC current measurement AC current measurement

Range Resolution Accuracy Accuracy
Range Resolution
CMP-400 CMP-401
40.00 A 0.01 A ±(2.5% m.v. + 5 digits)
4.000 A 0.001 A ±(2.5% m.v. + 12 digits) -
40.00 A 0.01 A ±(2.8% m.v. + 8 digits) ±(2.5% m.v. + 8 digits)
400.0 A 0.1 A ± (2.8% m.v. + 5 digits)
400.0 A 0.1 A ±(2.8% m.v. + 8 digits) ±(2.8% m.v. + 5 digits)
• frequency range: 50…60 Hz

DC voltage measurement AC voltage measurement

Range Resolution Accuracy Accuracy
Range Resolution
400.00 mV 0.01 mV ±(0.8% m.v. + 2 digits) CMP-400 CMP-401
4.000 V 0.001 V 400.00 mV 0.01 mV ±(1.5% m.v. + 30 digits) ±(1.5% m.v. + 30 digits)
40.00 V 0.01 V ±(1.5% m.v. + 2 digits) 4.000 V 0.001 V
400.0 V 0.1 V 40.00 V 0.01 V ±(1.8% m.v. + 8 digits) ±(1.5% m.v. + 2 digits)
600 V 1V ±(2% m.v. + 2 digits) 400.0 V 0.1 V
600 V 1V ±(2.5% m.v. + 8 digits) ±(2% m.v. + 2 digits)
• frequency range: 50…60 Hz

Resistance measurement Frequency measurement

Range Resolution Accuracy Range Accuracy
100.0 Ω 0.1 Ω ±(1.0% m.v. + 4 digits) 10 Hz…10 kHz ±(1.5% m.v. + 2 digits)
4.000 kΩ 0.001 kΩ
40.00 kΩ 0.01 kΩ ±(1.5% m.v. + 2 digits) Temperature
400.0 kΩ 0.1 kΩ Range Resolution Accuracy *
4.000 MΩ 0.001 MΩ ±(2.5% m.v. + 3 digits) -20...+760°C 1°C ±(3% m.v. + 5°C)
40.00 MΩ 0.01 MΩ ±(3.5% m.v. + 5 digits) -4...+1400°F 1°F ±(3% m.v. + 9°F)
* probe accuracy not included

CMP-401 | Capacitance measurement

Range Resolution Accuracy
40.00 nF 0.01 nF ±(4% m.v. + 20 digits)
400.0 nF 0.1 nF
4.000 μF 0.001 μF ±(3% m.v. + 5 digits)
40.00 μF 0.01 μF
100.0 μF 0.1 μF ±(4% m.v. + 10 digits)

Abbreviation „m.v.” used in the specification of measurement means a measured value.

page 2 / 3 sonel.com
Technical specification Standard accessories
test lead with probe
power supply of the meter 9 V battery, type 6LR61 for CMM/CMP (set)
WAPRZCMP1
display reading 4000, backlit LCD, 3¾ digits

continuity test threshold 50 Ω, measurement current <0.5 mA Temperature

measurement
typical measurement current 0.3 mA type K probe
diode test WASONTEMK
typical voltage of open circuit 1.5 V DC
adapter
indication of low battery charge ‘BAT’ symbol is displayed WAADATEMK

indication of range overflow ‘OL’ symbol is displayed

Standard car-
frequency of measurements 2 readings per second, nominal rying case

temperature sensor K-type temperature probe

interior clamp diameter opening 1.2” (30 mm)

6LR61 9 V battery

input impedance 10 MΩ (V DC and V AC)

AC bandwidth 50…400 Hz (A AC and V AC)

Optional accessories
auto-off timeout ca. 30 minutes
AC-16 line splitter
(faciliates current
dimensions 197 x 70 x 40 mm | 7.8” x 2.8” x 1.6” measurements)
WAADAAC16
weight 183 g | 0.4 lbs

compliance with standards EN 61010-1, EN 61010-2-032

S1 carrying case
WAFUTS1

Nominal operating conditions Temperature

measurement

operating temperature range 5…40°C | 41…104°F probe (K-type, bayonet)

WASONTEMP
max. 80% up to 31°C probe (K-type, metal)
operating humidity WASONTEMK2
decreasing linearly to 50% at 40°C

storage temperature -20…+60°C | -4…+140°F at humidity <80%

Set of test leads
operating altitude max. 2000 m CAT IV, S
WAPRZCMM1

CAT IV, M
WAPRZCMM2

Crocodile clip mini,

1 kV 10 A (set)
WAKROKPL10MINI

page 3 / 3 sonel.com