BGBRotary Swivel Joint
BGBRotary Swivel Joint
BGBRotary Swivel Joint
www.bgbinnovation.com
Rotary Unions
Fine tolerances, gasket selection and seal
design ensure no unquantified leaks from
manufacture. This is rigorously validated
against the test specification within our
specifically designed in-house test rigs.
www.bgbinnovation.com
Depending on your requirements, BGB can support you in the design of multi-
passage swivel joints, combined solutions and facilitation of various fluids. In
highly corrosive environments (such as marine) or where there is exposure to
external agents, BGB can support you in the most appropriate material selection
to ensure solution life expectancy is achieved and the cleanliness of your medium
is protected.
Case Study
THE CHALLENGE: Provide a low cost and robust
solution suitable for wind turbine pitch actuation with a
20 year design life. Spec Parameters
Revs 175e6 during lifetime
RPM 25
Pressure cycles PS: 225 – 265 bar, TS: 0 – 70 bar
Leakage Rate <1L/min
Oil cleanliness ISO4406
Oil temp -40 to 70oC
Corrosion Class ISO9223
Stator Material EN10088 1.414 ASTM A582 Grade 416
Rotor Material EN10084 ASTM A322 Grade 4140
www.bgbinnovation.com
PROVIDING ENGINEERING SOLUTIONS SINCE 1976
“To connect, inspire and work closely together
so that we are proud of our achievements, community
and shared success.”
WWW.BGBINNOVATION.COM
Email: [email protected]
@bgb_innovation