Scribd
Upload
27 views6 pages

Lab7 Task02

This code connects an Arduino to WiFi and publishes sensor data to Ubidots using MQTT. It defines constants for the WiFi credentials, MQTT client name, and Ubidot variables. It initializes WiFi and MQTT connections, reads analog sensor values, converts them to strings, and publishes each as a separate message with a 1000ms delay between messages.

Uploaded by

Junaid Akhtar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
27 views6 pages

Lab7 Task02

This code connects an Arduino to WiFi and publishes sensor data to Ubidots using MQTT. It defines constants for the WiFi credentials, MQTT client name, and Ubidot variables. It initializes WiFi and MQTT connections, reads analog sensor values, converts them to strings, and publishes each as a separate message with a 1000ms delay between messages.

Uploaded by

Junaid Akhtar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

#include <WiFi.

h>

#include <PubSubClient.h>

#define WIFISSID "Honor Play" // Put your WifiSSID here

#define PASSWORD "12345678" // Put your wifi password here

#define TOKEN "BBFF-UP4uwJCVHT0UVbglk3dTF7cJCW2D2L" // Put your Ubidots' TOKEN

#define MQTT_CLIENT_NAME "PYAgp9EERR" // MQTT client Name, please enter your own 8-12
alphanumeric character ASCII string;

//it should be a random and unique ascii string and different from all other
devices

/**************

* Define Constants

**************/

#define VARIABLE_LABEL "pot_1" // Assing the variable label

#define VARIABLE_LABEL1 "pot_2" // Assing the variable label

#define VARIABLE_LABEL2 "pot_3" // Assing the variable label

#define DEVICE_LABEL "lab_07_task_02" // Assig the device label

#define SENSOR 33 // Set the GPIO12 as SENSOR

char mqttBroker[] = "industrial.api.ubidots.com";

char payload[100];

char topic[150];

// Space to store values to send

char str_sensorP_1[10];
char str_sensorP_2[10];

char str_sensorP_3[10];

/**************

* Auxiliar Functions

**************/

WiFiClient ubidots;

PubSubClient client(ubidots);

void callback(char* topic, byte* payload, unsigned int length) {

char p[length + 1];

memcpy(p, payload, length);

p[length] = NULL;

String message(p);

Serial.write(payload, length);

Serial.println(topic);

void reconnect() {

// Loop until we're reconnected

while (!client.connected()) {

Serial.println("Attempting MQTT connection...");

// Attemp to connect

if (client.connect(MQTT_CLIENT_NAME, TOKEN, "")) {

Serial.println("Connected");
} else {

Serial.print("Failed, rc=");

Serial.print(client.state());

Serial.println(" try again in 2 seconds");

// Wait 2 seconds before retrying

delay(2000);

/**************

* Main Functions

**************/

void setup() {

Serial.begin(115200);

WiFi.begin(WIFISSID, PASSWORD);

// Assign the pin as INPUT

pinMode(SENSOR, INPUT);

Serial.println();

Serial.print("Wait for WiFi...");

while (WiFi.status() != WL_CONNECTED) {

Serial.print(".");

delay(500);
}

Serial.println("");

Serial.println("WiFi Connected");

Serial.println("IP address: ");

Serial.println(WiFi.localIP());

client.setServer(mqttBroker, 1883);

client.setCallback(callback);

void loop() {

if (!client.connected()) {

reconnect();

sprintf(topic, "%s%s", "/v1.6/devices/", DEVICE_LABEL);

sprintf(payload, "%s", ""); // Cleans the payload

sprintf(payload, "{\"%s\":", VARIABLE_LABEL); // Adds the variable label

float sensorP_1 = analogRead(SENSOR);

Serial.println(sensorP_1);

float sensorP_2 = sensorP_1/2;

Serial.println(sensorP_2);

float sensorP_3 = sensorP_1/4;


Serial.println(sensorP_3);

/* 4 is mininum width, 2 is precision; float value is copied onto str_sensor*/

dtostrf(sensorP_1, 4, 2, str_sensorP_1);

sprintf(payload, "%s {\"value\": %s}}", payload, str_sensorP_1); // Adds the value

client.publish(topic, payload);

client.loop();

delay(1000);

sprintf(payload, "{\"%s\":", VARIABLE_LABEL1); // Adds the variable label

dtostrf(sensorP_2, 4, 2, str_sensorP_2);

sprintf(payload, "%s {\"value\": %s}}", payload, str_sensorP_2); // Adds the value

client.publish(topic, payload);

client.loop();

delay(1000);

sprintf(payload, "{\"%s\":", VARIABLE_LABEL2); // Adds the variable label

dtostrf(sensorP_3, 4, 2, str_sensorP_3);

sprintf(payload, "%s {\"value\": %s}}", payload, str_sensorP_3); // Adds the value

Serial.println("Publishing data to Ubidots Cloud");

client.publish(topic, payload);

client.loop();

delay(1000);

You might also like