Scribd
Upload
92 views1 page

WCP 2

The document is an inspection certificate for a batch of Magnavis WCP-2 White Contrast Paint Aerosol produced between January 31, 2018 and February 7, 2018. It certifies that the batch meets various international standards for non-destructive testing, including EN ISO 9934-2&EN ISO 9934-1 and ASME Boiler and Pressure Vessel Code. Test results show the batch passed for performance, color, and contained less than 200 parts per million of halogens, sulfur, and mercury. The certificate was issued under the Quality Assurance Manager and materials have a minimum shelf life of 3 years from date of manufacture.

Uploaded by

petrolift Sal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views1 page

WCP 2

The document is an inspection certificate for a batch of Magnavis WCP-2 White Contrast Paint Aerosol produced between January 31, 2018 and February 7, 2018. It certifies that the batch meets various international standards for non-destructive testing, including EN ISO 9934-2&EN ISO 9934-1 and ASME Boiler and Pressure Vessel Code. Test results show the batch passed for performance, color, and contained less than 200 parts per million of halogens, sulfur, and mercury. The certificate was issued under the Quality Assurance Manager and materials have a minimum shelf life of 3 years from date of manufacture.

Uploaded by

petrolift Sal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Inspection Certificate

MANUFACTURE DATE:31/01/2018-07/02/2018 Abnahmeprufzeugnis DIN EN 10204 3.1


Certificat De reception
Certificado di collaudo
Keuringsrapport

SUBJECT:Magnavis WCP-2 White Contrast Paint Aerosol BATCH No:180202


B.B.E.:JAN/FEB 2021

WCP-2 is a rapid drying White Contrast Paint designed to aid contrast during magnetic particle inspection in white light using
colour contrast (black or red) magnetic particles.

We hereby certify that the above material supplied against your order:

A. Meets the requirements of EN ISO 9934-2&EN ISO 9934-1, Paragraph 7 & 10 as applicable.

B. ASME Boiler and Pressure Vessel Code, Section V, 2004, 2007, 2010, 2013,2015 & 2017 Edition, Nondestructive
Examination, article 7, including 2005, 2006, 2008, 2009b & 2011a Addenda, Paragraphs, T731 and Article 25
as applicable.

C. Was manufactured, in accordance with our standard procedures within the requirements of BS EN ISO 9001 - 2008 for
Quality systems.

When tested at the time of manufacture the following results were obtained:

Property Result Requirement Test Method

Performance Pass Equal to Std 7.1 in EN ISO 9934-2


Colour Pass Equal to Std 7.2 in EN ISO 9934-2
Halogens fluorine & chlorine, < 13 < 200 7.15 in EN ISO9934-2
ppm
Sulphur, ppm < 21 < 200 7.15 in EN ISO 9934-2

Sulphur and Halogen levels according to ASME B&PV Code Section V and EN ISO 9934-2.

We further certify that the material does not contain mercury as a basic element and no mercury bearing equipment was used
in its manufacture.

Certification is issued under the auspices of the Quality Assurance Manager.

(Authorised Employee)

For and on behalf of MAGNAFLUX (A DIVISION OF ITW LTD)


Notes:

1. Bulk materials have a minimum shelf life of 5 years from date of manufacture. Aerosols have a minimum shelf life of 3 years from date of manufacture.
2 The above certification gives the results obtained at the time of manufacture. Age and use may alter the properties of any material.
3. Most specifications require test results stated in percent, but some require parts per million (ppm). To convert "percent" figures to "parts per million" move the decimal four places to the
right.

Magnaflux (A Division of ITW Ltd),


Faraday Road, South Dorcan Industrial Estate,
FORMAT: MX 101.134 Rev 10 Swindon, Wiltshire, SN3 5HE, UK

You might also like