Design Report

1) Description of Building
a) The building is single storey building (Framed Structure)
b) External Walls 230mm thick normal bricks (unit wt. 2000kg/m3)
c) Internal wall 115mm thick normal bricks (unit wt. 2000kg/m3)
d) 2 nos water tank of 2000 L capacity each is mounted on the roof
e) Grade of concrete M35
f) Grade of Steel Fe 500D
g) Clear Cover for Slab is 20mm, for beam is 25mm
h) SBC at footing level is 10t/m2
i) Roof tiling is considered as tiles/pavors (unit wt. 50kg/m2)
j) Parapet of 115mm thick is provided at roof

2) Analysis
The structural analysis of building is carried out in Staad Pro software

3) Loading
Following loads are considered for design of building

3.1 Dead Loads

a) Self Weight
The self wt. of RCC elements is taken as per Staad
Roof thickness = 120 mm
Plaster= 0.05 t/m2
Self Weight of roof= 0.35 t/m2
b) Wall Loads
230 thick wall= 0.46 t/m2
Plaster= 0.05 t/m2
Ht, of wall= 2.55 m
UDL on external beam= 1.30 t/m
115 thick wall= 0.23 t/m2
Plaster= 0.05 t/m2
Ht, of wall= 2.55 m
UDL on internal beam= 0.71 t/m
c) Roof Load
Tile load = 0.05 t/m2
d) Parapet Load (including plaster)
Parapet thickness = 0.165 m
Parapet Height = 0.3 m
Parapet UDL = 0.10 t/m
e) Load due to cantilever roof
Roof Cantilever = 0.6 m
Roof thickness = 0.12 m
Plaster= 0.05 t/m2
Load due to cantilever roof 0.21 t/m
f) Water Tank Load
Capacity of water tank= 2000 L
Wt. of water tank = 2 tons
No. of water tank = 2

Page 2 of 63
 Thick of supporting RCC Slab= 0.12 m
Self wt. of supporting slab = 0.56 tons
Total Load due to water tanks= 4.56 tons
Load on 4 nos supports= 1.14 tons

3.2 Live Load

Roof Live Load = 0.2 t/m2 (IS 875 part 2) Tab 1
Floor Live Load = 0.2 t/m2 (IS 875 part 2) Tab 1

3.3 Siesmic Load

Zone factor Z = 0.24 (For Zone-IV IS 1893 Part 1)
Importance factor = 1.2 (For residential or commercial building)
Response reduction factor= 5 (Tab 9 SMRF)
Ta = 0.09h/sqrt(d)
Ht. of building(h) = 3.8 m
base dimension(d) along x = 6.746 m
base dimension(d) along z = 4.36 m
Time period along x = 0.132 s
Time period along z = 0.164 s
Hence Time period 0<Ta<0.4s
Sa/g = 2.5

Ah = Z/2 x I/R x Sa/g

= 0.072
Hence Seismic percentage = 7.2 %

Seismic Load Generation

Reactions from Staad at Column Joints
Node L/C Fx Mton Fy Mton Fz Mton Mx kN-m My kN-m Mz kN-m
7 100 DL + LL(SEISMIC) 0 101.379 0 -47.057 0 41.943
9 100 DL + LL(SEISMIC) 0 58.942 0 -26.143 0 -9.391
10 100 DL + LL(SEISMIC) 0 76.844 0 33.276 0 25.393
12 100 DL + LL(SEISMIC) 0 65.911 0 30.917 0 -13.078
13 100 DL + LL(SEISMIC) 0 59.064 0 -26.513 0 27.422
15 100 DL + LL(SEISMIC) 0 39.137 0 -18.254 0 -8.863
16 100 DL + LL(SEISMIC) 0 52.596 0 26.513 0 21.084
18 100 DL + LL(SEISMIC) 0 36.8 0 18.254 0 -7.023
22 100 DL + LL(SEISMIC) 0 90.377 0 -40.526 0 -12.843
23 100 DL + LL(SEISMIC) 0 76.383 0 40.526 0 -11.81
42 100 DL + LL(SEISMIC) 0 68.806 0 35.388 0 0
43 100 DL + LL(SEISMIC) 0 41.868 0 20.859 0 -12.037

Seismic Loads at Joints

Node Fy kN
7 7.30 Mton
9 4.24 Mton
10 5.53 Mton
12 4.75 Mton
13 4.25 Mton

Page 3 of 63
 15 2.82 Mton
16 3.79 Mton
18 2.65 Mton
22 6.51 Mton
23 5.50 Mton
42 4.95 Mton
43 3.01 Mton

3) Load Combinations

*****LOAD COMB FOR FOOTING************************

LOAD COMB 11 DL+WL+LL
3 1.0 4 1.0 5 1.0
LOAD COMB 12 EQX+DL+WL+LLS
1 1.0 3 1.0 4 1.0 6 1.0
LOAD COMB 13 -EQX+DL+WL+LLS
1 -1.0 3 1.0 4 1.0 6 1.0
LOAD COMB 14 EQZ+DL+WL+LLS
2 1.0 3 1.0 4 1.0 6 1.0
LOAD COMB 15 -EQZ+DL+WL+LLS
2 -1.0 3 1.0 4 1.0 6 1.0
LOAD COMB 16 EQX+DL+WL
1 1.0 3 1.0 4 1.0
LOAD COMB 17 -EQX+DL+WL
1 -1.0 3 1.0 4 1.0
LOAD COMB 18 EQZ+DL+WL
2 1.0 3 1.0 4 1.0
LOAD COMB 19 -EQZ+DL+WL
2 -1.0 3 1.0 4 1.0
LOAD COMB 20 WLX+DL+WL+LL
7 1.0 3 1.0 4 1.0 5 1.0
LOAD COMB 21 -WLX+DL+WL+LL
8 1.0 3 1.0 4 1.0 5 1.0
LOAD COMB 22 WLZ+DL+WL+LL
9 1.0 3 1.0 4 1.0 5 1.0
LOAD COMB 23 -WLZ+DL+WL+LL
10 1.0 3 1.0 4 1.0 5 1.0
LOAD COMB 24 EQX+0.9DL+0.9WL
1 1.0 3 0.9 4 0.9
LOAD COMB 25 -EQX+0.9DL+0.9WL
1 -1.0 3 0.9 4 0.9
LOAD COMB 26 EQZ+0.9DL+0.9WL
2 1.0 3 0.9 4 0.9
LOAD COMB 27 -EQZ+0.9DL+0.9WL
2 -1.0 3 0.9 4 0.9
LOAD COMB 28 WLX+0.9DL+0.9WL
7 1.0 3 0.9 4 0.9
LOAD COMB 29 -WLX+0.9DL+0.9WL
8 1.0 3 0.9 4 0.9
LOAD COMB 30 WLZ+0.9DL+0.9WL

Page 4 of 63
9 1.0 3 0.9 4 0.9
LOAD COMB 31 -WLZ+0.9DL+0.9WL
10 1.0 3 0.9 4 0.9
*******LOAD COMB FOR DESIGN OF COL & BEAMS**********
LOAD COMB 41 1.5DL+1.5WL+1.5LL
3 1.5 4 1.5 5 1.5
LOAD COMB 42 1.2EQX+1.2DL+1.2WL+1.2LLS
1 1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 43 -1.2EQX+1.2DL+1.2WL+1.2LLS
1 -1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 44 1.2EQZ+1.2DL+1.2WL+1.2LLS
2 1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 45 -1.2EQZ+1.2DL+1.2WL+1.2LLS
2 -1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 46 1.5EQX+1.5DL+1.5WL
1 1.5 3 1.5 4 1.5
LOAD COMB 47 -1.5EQX+1.5DL+1.5WL
1 -1.5 3 1.5 4 1.5
LOAD COMB 48 1.5EQZ+1.5DL+1.5WL
2 1.5 3 1.5 4 1.5
LOAD COMB 49 -1.5EQZ+1.5DL+1.5WL
2 -1.5 3 1.5 4 1.5
LOAD COMB 50 1.5EQX+0.9DL+0.9WL
1 1.5 3 0.9 4 0.9
LOAD COMB 51 -1.5EQX+0.9DL+0.9WL
1 -1.5 3 0.9 4 0.9
LOAD COMB 52 1.5EQZ+0.9DL+0.9WL
2 1.5 3 0.9 4 0.9
LOAD COMB 53 -1.5EQZ+0.9DL+0.9WL
2 -1.5 3 0.9 4 0.9
LOAD COMB 54 1.5WLX+1.5DL+1.5WL
7 1.5 3 1.5 4 1.5
LOAD COMB 55 -1.5WLX+1.5DL+1.5WL
8 1.5 3 1.5 4 1.5
LOAD COMB 56 1.5WLZ+1.5DL+1.5WL
9 1.5 3 1.5 4 1.5
LOAD COMB 57 -1.5WLZ+1.5DL+1.5WL
10 1.5 3 1.5 4 1.5
LOAD COMB 58 1.5WLX+0.9DL+0.9WL
7 1.5 3 0.9 4 0.9
LOAD COMB 59 -1.5WLX+0.9DL+0.9WL
8 1.5 3 0.9 4 0.9
LOAD COMB 60 1.5WLZ+0.9DL+0.9WL
9 1.5 3 0.9 4 0.9
LOAD COMB 61 -1.5WLZ+0.9DL+0.9WL
10 1.5 3 0.9 4 0.9
LOAD COMB 62 1.2WLX+1.2DL+1.2WL+1.2LLS
7 1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 63 -1.2WLX+1.2DL+1.2WL+1.2LLS
8 1.2 3 1.2 4 1.2 6 1.2

Page 5 of 63
 LOAD COMB 64 1.2WLZ+1.2DL+1.2WL+1.2LLS
9 1.2 3 1.2 4 1.2 6 1.2
LOAD COMB 65 -1.2WLZ+1.2DL+1.2WL+1.2LLS
10 1.2 3 1.2 4 1.2 6 1.2

4) Design

The Design of Beams and Columns is done from Staad as per IS 456

The Foundation design is done as per Appendix 1

The Slab design is done as per Appendix 2

Page 6 of 63
 15 May 2023 23:23

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.12.00.142 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 15, 2023 *
* Time= 23:52:23 *
* *
* Licensed to: Civil Baba Infra Consultants Pvt *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\Soma Sharma\Desktop\Bihar Toilet Block\Staad\Toilet Block Std.REVISED.STD
2. START JOB INFORMATION
3. ENGINEER DATE 15-MAY-23
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 98.5 0; 3 6.746 98.5 0; 4 0 98.5 4.36; 6 6.746 98.5 4.36; 7 0 100 0
9. 9 6.746 100 0; 10 0 100 4.36; 12 6.746 100 4.36; 13 0 103.5 0
10. 15 6.746 103.5 0; 16 0 103.5 4.36; 18 6.746 103.5 4.36; 19 0 103.5 2.18
11. 21 6.746 103.5 2.18; 22 4.121 100 4.36; 23 4.121 100 0; 24 0 100 1.516
12. 25 4.121 100 1.516; 26 1.072 100 0; 27 1.072 100 1.516; 28 2.088 100 0
13. 29 2.088 100 1.516; 30 3.104 100 0; 31 3.104 100 1.516; 32 5.434 100 4.36
14. 33 4.121 100 3.047; 34 5.434 100 3.047; 35 6.746 100 3.047; 36 1.873 103.5 0
15. 37 4.873 103.5 0; 38 1.873 103.5 2.18; 39 4.873 103.5 2.18; 40 4.121 98.5 0
16. 41 4.121 98.5 4.36; 42 4.121 103.5 0; 43 4.121 103.5 4.36; 44 4.121 103.5 2.18
17. MEMBER INCIDENCES
18. 1 1 7; 3 3 9; 4 4 10; 6 6 12; 7 7 13; 9 9 15; 10 10 16; 12 12 18; 13 13 36
19. 14 36 42; 15 16 43; 17 13 19; 19 15 21; 20 7 26; 21 30 23; 22 10 22; 24 7 24
20. 25 23 25; 26 9 35; 27 19 16; 29 21 18; 30 19 38; 31 38 44; 32 22 32; 33 23 9
21. 34 24 10; 35 25 33; 36 24 27; 37 26 28; 38 27 29; 39 28 30; 40 29 31; 42 31 25
22. 43 26 27; 44 28 29; 45 30 31; 46 32 12; 47 33 22; 48 33 34; 49 34 32; 50 35 12
23. 51 34 35; 53 37 15; 55 39 21; 56 40 23; 57 41 22; 58 42 37; 59 23 42; 60 43 18
24. 61 22 43; 62 44 39; 63 42 44; 64 44 43
25. DEFINE MATERIAL START
26. ISOTROPIC CONCRETE
27. E 2.17185E+07
28. POISSON 0.17
29. DENSITY 23.5616
30. ALPHA 1E-05
31. DAMP 0.05
32. G 9.28139E+06
33. TYPE CONCRETE
34. STRENGTH FCU 27579
35. END DEFINE MATERIAL
36. MEMBER PROPERTY
37. 1 3 4 6 7 9 10 12 56 57 59 61 PRIS YD 0.23 ZD 0.3
38. 20 TO 22 24 TO 26 30 TO 40 42 TO 51 55 62 PRIS YD 0.3 ZD 0.23

Page 7 of 63
 15 May 2023 23:23

STAAD SPACE -- PAGE NO. 2

39. 13 TO 15 17 19 27 29 53 58 60 63 64 PRIS YD 0.45 ZD 0.23

40. CONSTANTS
41. BETA 90 MEMB 56 57 59 61
42. MATERIAL CONCRETE ALL
43. SUPPORTS
44. 1 3 4 6 40 41 FIXED
45. LOAD 1 EQX
46. JOINT LOAD
47. 7 FX 7.3
48. 9 FX 4.24
49. 10 FX 5.53
50. 12 FX 4.75
51. 13 FX 4.25
52. 15 FX 2.82
53. 16 FX 3.79
54. 18 FX 2.65
55. 22 FX 6.51
56. 23 FX 5.5
57. 42 FX 4.95
58. 43 FX 3.01
59. LOAD 2 EQZ
60. JOINT LOAD
61. 7 FZ 7.3
62. 9 FZ 4.24
63. 10 FZ 5.53
64. 12 FZ 4.75
65. 13 FZ 4.25
66. 15 FZ 2.82
67. 16 FZ 3.79
68. 18 FZ 2.65
69. 22 FZ 6.51
70. 23 FZ 5.5
71. 42 FZ 4.95
72. 43 FZ 3.01
73. *******************************************************************************
74. LOAD 3 DEAD LOAD
75. SELFWEIGHT Y -1
76. FLOOR LOAD
77. YRANGE 103.5 103.5 FLOAD -3.5 XRANGE 0 6.746 ZRANGE 0 4.36 GY
**NOTE** about Floor/OneWay Loads/Weights.
Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

78. MEMBER LOAD

79. 20 TO 22 24 26 32 TO 34 37 39 46 50 UNI GY -13
80. 25 35 36 38 40 42 TO 45 47 TO 49 UNI GY -7.1
81. FLOOR LOAD
82. YRANGE 103.5 103.5 FLOAD -0.5 XRANGE 0 6.746 ZRANGE 0 4.36 GY

Page 8 of 63
 STAAD SPACE -- PAGE NO. 3

83. MEMBER LOAD

84. 13 TO 15 17 19 27 29 53 58 60 UNI GY -1.
85. 13 TO 15 17 19 27 29 53 58 60 UNI GY -2.1
86. JOINT LOAD
87. 36 TO 39 FY -11.4
88. LOAD 4 WALL LOAD
89. LOAD 5 LIVE LOAD
90. FLOOR LOAD
91. YRANGE 103.5 103.5 FLOAD -2 XRANGE 0 6.746 ZRANGE 0 4.36 GY
92. YRANGE 100 100 FLOAD -2 XRANGE 0 6.746 ZRANGE 0 4.36 GY
93. LOAD 6 LIVE LOAD IN SEISMIC
94. FLOOR LOAD
95. YRANGE 103.5 103.5 FLOAD -1 XRANGE 0 6.746 ZRANGE 0 4.36 GY
96. YRANGE 100 100 FLOAD -1 XRANGE 0 6.746 ZRANGE 0 4.36 GY
97. LOAD 7 WLX WIND LOAD IN +VE X DIRECTION
98. LOAD 8 WLX WIND LOAD IN -VE X DIRECTION
99. LOAD 9 WLZ WIND LOAD IN +VE Z DIRECTION
100. LOAD 10 WLZ WIND LOAD IN -VE Z DIRECTION
101. *******************************************************************************
102. *****LOAD COMB FOR FOOTING************************
103. LOAD COMB 11 DL+WL+LL
104. 3 1.0 4 1.0 5 1.0
105. LOAD COMB 12 EQX+DL+WL+LLS
106. 1 1.0 3 1.0 4 1.0 6 1.0
107. LOAD COMB 13 -EQX+DL+WL+LLS
108. 1 -1.0 3 1.0 4 1.0 6 1.0
109. LOAD COMB 14 EQZ+DL+WL+LLS
110. 2 1.0 3 1.0 4 1.0 6 1.0
111. LOAD COMB 15 -EQZ+DL+WL+LLS
112. 2 -1.0 3 1.0 4 1.0 6 1.0
113. LOAD COMB 16 EQX+DL+WL
114. 1 1.0 3 1.0 4 1.0
115. LOAD COMB 17 -EQX+DL+WL
116. 1 -1.0 3 1.0 4 1.0
117. LOAD COMB 18 EQZ+DL+WL
118. 2 1.0 3 1.0 4 1.0
119. LOAD COMB 19 -EQZ+DL+WL
120. 2 -1.0 3 1.0 4 1.0
121. LOAD COMB 20 WLX+DL+WL+LL
122. 7 1.0 3 1.0 4 1.0 5 1.0
123. LOAD COMB 21 -WLX+DL+WL+LL
124. 8 1.0 3 1.0 4 1.0 5 1.0
125. LOAD COMB 22 WLZ+DL+WL+LL
126. 9 1.0 3 1.0 4 1.0 5 1.0
127. LOAD COMB 23 -WLZ+DL+WL+LL
128. 10 1.0 3 1.0 4 1.0 5 1.0
129. LOAD COMB 24 EQX+0.9DL+0.9WL
130. 1 1.0 3 0.9 4 0.9
131. LOAD COMB 25 -EQX+0.9DL+0.9WL
132. 1 -1.0 3 0.9 4 0.9

Page 9 of 63
133. LOAD COMB 26 EQZ+0.9DL+0.9WL
134. 2 1.0 3 0.9 4 0.9
135. LOAD COMB 27 -EQZ+0.9DL+0.9WL
136. 2 -1.0 3 0.9 4 0.9
137. LOAD COMB 28 WLX+0.9DL+0.9WL
138. 7 1.0 3 0.9 4 0.9
139. LOAD COMB 29 -WLX+0.9DL+0.9WL
140. 8 1.0 3 0.9 4 0.9
141. LOAD COMB 30 WLZ+0.9DL+0.9WL
142. 9 1.0 3 0.9 4 0.9
143. LOAD COMB 31 -WLZ+0.9DL+0.9WL
144. 10 1.0 3 0.9 4 0.9
145. *******LOAD COMB FOR DESIGN OF COL & BEAMS**********
146. LOAD COMB 41 1.5DL+1.5WL+1.5LL
147. 3 1.5 4 1.5 5 1.5
148. LOAD COMB 42 1.2EQX+1.2DL+1.2WL+1.2LLS
149. 1 1.2 3 1.2 4 1.2 6 1.2
150. LOAD COMB 43 -1.2EQX+1.2DL+1.2WL+1.2LLS
151. 1 -1.2 3 1.2 4 1.2 6 1.2
152. LOAD COMB 44 1.2EQZ+1.2DL+1.2WL+1.2LLS
153. 2 1.2 3 1.2 4 1.2 6 1.2
154. LOAD COMB 45 -1.2EQZ+1.2DL+1.2WL+1.2LLS
155. 2 -1.2 3 1.2 4 1.2 6 1.2
156. LOAD COMB 46 1.5EQX+1.5DL+1.5WL
157. 1 1.5 3 1.5 4 1.5
158. LOAD COMB 47 -1.5EQX+1.5DL+1.5WL
159. 1 -1.5 3 1.5 4 1.5
160. LOAD COMB 48 1.5EQZ+1.5DL+1.5WL
161. 2 1.5 3 1.5 4 1.5
162. LOAD COMB 49 -1.5EQZ+1.5DL+1.5WL
163. 2 -1.5 3 1.5 4 1.5
164. LOAD COMB 50 1.5EQX+0.9DL+0.9WL
165. 1 1.5 3 0.9 4 0.9
166. LOAD COMB 51 -1.5EQX+0.9DL+0.9WL
167. 1 -1.5 3 0.9 4 0.9
168. LOAD COMB 52 1.5EQZ+0.9DL+0.9WL
169. 2 1.5 3 0.9 4 0.9
170. LOAD COMB 53 -1.5EQZ+0.9DL+0.9WL
171. 2 -1.5 3 0.9 4 0.9
172. LOAD COMB 54 1.5WLX+1.5DL+1.5WL
173. 7 1.5 3 1.5 4 1.5
174. LOAD COMB 55 -1.5WLX+1.5DL+1.5WL
175. 8 1.5 3 1.5 4 1.5
176. LOAD COMB 56 1.5WLZ+1.5DL+1.5WL
177. 9 1.5 3 1.5 4 1.5
178. LOAD COMB 57 -1.5WLZ+1.5DL+1.5WL
179. 10 1.5 3 1.5 4 1.5
180. LOAD COMB 58 1.5WLX+0.9DL+0.9WL
181. 7 1.5 3 0.9 4 0.9
182. LOAD COMB 59 -1.5WLX+0.9DL+0.9WL
183. 8 1.5 3 0.9 4 0.9
184. LOAD COMB 60 1.5WLZ+0.9DL+0.9WL
185. 9 1.5 3 0.9 4 0.9
186. LOAD COMB 61 -1.5WLZ+0.9DL+0.9WL
187. 10 1.5 3 0.9 4 0.9
188. LOAD COMB 62 1.2WLX+1.2DL+1.2WL+1.2LLS

Page 10 of 63
 STAAD SPACE -- PAGE NO. 5

189. 7 1.2 3 1.2 4 1.2 6 1.2

190. LOAD COMB 63 -1.2WLX+1.2DL+1.2WL+1.2LLS
191. 8 1.2 3 1.2 4 1.2 6 1.2
192. LOAD COMB 64 1.2WLZ+1.2DL+1.2WL+1.2LLS
193. 9 1.2 3 1.2 4 1.2 6 1.2
194. LOAD COMB 65 -1.2WLZ+1.2DL+1.2WL+1.2LLS
195. 10 1.2 3 1.2 4 1.2 6 1.2
196. LOAD COMB 100 DL + LL(SEISMIC)
197. 3 1.0 6 1.0 4 1.0
198. *******************************************************************************
199. PERFORM ANALYSIS PRINT STATICS CHECK

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 37 NUMBER OF MEMBERS 53

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

Using 64-bit analysis engine.

SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 10, TOTAL DEGREES OF FREEDOM = 186

TOTAL LOAD COMBINATION CASES = 47 SO FAR.

Page 11 of 63
 STAAD SPACE -- PAGE NO. 6

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

EQX

CENTER OF FORCE BASED ON X FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.325214331E+01
Y = 0.101358859E+03
Z = 0.206883190E+01
TOTAL APPLIED LOAD 1

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 55.30
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= 114.41 MZ= -5605.15

TOTAL REACTION LOAD 1

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = -55.30
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.00 MY= -114.41 MZ= 5605.15

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

MAXIMUMS AT NODE
X = 3.12258E-01 13
Y = -1.61633E-02 26
Z = -1.25011E-02 19
RX= -5.63860E-05 26
RY= -6.36965E-05 19
RZ= -4.22821E-04 7

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2

EQZ

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.325214331E+01
Y = 0.101358859E+03
Z = 0.206883190E+01

Page 12 of 63
TOTAL APPLIED LOAD 2

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = 55.30

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 5605.15 MY= -179.84 MZ= 0.00

TOTAL REACTION LOAD 2

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 0.00
SUMMATION FORCE-Z = -55.30

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -5605.15 MY= 179.84 MZ= -0.00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)

MAXIMUMS AT NODE
X = -1.41894E-02 15
Y = -1.91175E-02 27
Z = 3.43200E-01 13
RX= 5.87540E-04 10
RY= 1.38603E-04 39
RZ= 3.18550E-05 25

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 3

DEAD LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.336797606E+01
Y = 0.101373158E+03
Z = 0.205714059E+01
TOTAL APPLIED LOAD 3

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -820.25
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 1687.37 MY= 0.00 MZ= -2762.58

TOTAL REACTION LOAD 3

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCE-X = -0.00
SUMMATION FORCE-Y = 820.25
SUMMATION FORCE-Z = -0.00

Page 13 of 63
 SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= -1687.37 MY= 0.00 MZ= 2762.58

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 3)

MAXIMUMS AT NODE
X = 2.72822E-02 16
Y = -5.39127E-01 29
Z = 3.98564E-02 13
RX= 1.89121E-03 28
RY= 6.83431E-05 38
RZ= -1.86533E-03 24

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 4

WALL LOAD

TOTAL APPLIED LOAD 4

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 4 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 4

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 4 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 4)

MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 5

LIVE LOAD

Page 14 of 63
 CENTER OF FORCE BASED ON Y FORCES ONLY (METE).
(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.337298174E+01
Y = 0.101750019E+03
Z = 0.217999039E+01
TOTAL APPLIED LOAD 5

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 5 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -117.65
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 256.47 MY= 0.00 MZ= -396.83

TOTAL REACTION LOAD 5

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 5 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 117.65
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -256.47 MY= 0.00 MZ= 396.83

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 5)

MAXIMUMS AT NODE
X = 3.96109E-03 16
Y = -1.08928E-01 29
Z = 8.08852E-03 13
RX= 5.06755E-04 28
RY= 1.26647E-05 37
RZ= -4.28613E-04 24

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 6

LIVE LOAD IN SEISMIC

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.337298174E+01
Y = 0.101750019E+03
Z = 0.217999038E+01
TOTAL APPLIED LOAD 6

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 6 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -58.82
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 128.24 MY= 0.00 MZ= -198.41

Page 15 of 63
TOTAL REACTION LOAD 6

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 6 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 58.82
SUMMATION FORCE-Z = -0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -128.24 MY= 0.00 MZ= 198.41

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 6)

MAXIMUMS AT NODE
X = 1.98054E-03 16
Y = -5.44642E-02 29
Z = 4.04426E-03 13
RX= 2.53378E-04 28
RY= 6.33236E-06 37
RZ= -2.14306E-04 24

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 7

WLX WIND LOAD IN +VE X DIRECTION

TOTAL APPLIED LOAD 7

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 7 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 7

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 7 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 7)

MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 8

WLX WIND LOAD IN -VE X DIRECTION

Page 16 of 63
TOTAL APPLIED LOAD 8

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 8 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 8

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 8 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 8)

MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 9

WLZ WIND LOAD IN +VE Z DIRECTION

TOTAL APPLIED LOAD 9

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 9 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 9

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 9 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

Page 17 of 63
 MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 9)
MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 10

WLZ WIND LOAD IN -VE Z DIRECTION

TOTAL APPLIED LOAD 10

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 10 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

TOTAL REACTION LOAD 10

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 10 )

SUMMATION FORCE-X = 0.0000000E+00
SUMMATION FORCE-Y = 0.0000000E+00
SUMMATION FORCE-Z = 0.0000000E+00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 0.0000000E+00 MY= 0.0000000E+00 MZ= 0.0000000E+00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 10)

MAXIMUMS AT NODE
X = 0.00000E+00 0
Y = 0.00000E+00 0
Z = 0.00000E+00 0
RX= 0.00000E+00 0
RY= 0.00000E+00 0
RZ= 0.00000E+00 0

************ END OF DATA FROM INTERNAL STORAGE ************

200. DEFINE ENVELOPE

201. 41 TO 65 ENVELOPE 1 TYPE STRENGTH
202. 11 TO 31 ENVELOPE 2 TYPE SERVICEABILITY
203. END DEFINE ENVELOPE
204. LOAD LIST ENV 1
205. START CONCRETE DESIGN
CONCRETE DESIGN
206. CODE INDIAN
207. CLEAR 0.025 ALL
208. FC 35000 ALL
209. FYMAIN 500000 ALL

Page 18 of 63
210. FYSEC 500000 ALL
211. DESIGN BEAM 13 TO 15 17 19 TO 22 24 TO 27 29 TO 40 42 TO 51 53 55 58 60 62 -
212. 63 TO 64

Page 19 of 63
BEAM

====================================================
IS 456 - 2000 B E A M D E S I G N R E S U L T S
====================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 13 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1873.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 162.27 162.27 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 162.27 162.27 162.27 198.38 225.92

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM START SUPPORT

VY = 28.41 MX = -2.27 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

Page 20 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 14 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2248.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 562.0 mm 1124.0 mm 1686.0 mm 2248.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 162.27 229.65
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 225.92 171.26 162.27 0.00 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 562.0 mm 1124.0 mm 1686.0 mm 2248.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 565.0 mm AWAY FROM END SUPPORT

VY = -40.73 MX = -2.27 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 15 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4121.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

Page 21 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 1030.2 mm 2060.5 mm 3090.8 mm 4121.0 mm
----------------------------------------------------------------------------
TOP 161.87 0.00 0.00 0.00 170.46
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 161.87 161.87 161.87 161.87 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1030.2 mm 2060.5 mm 3090.8 mm 4121.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM START SUPPORT

VY = 21.10 MX = 2.37 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

SHEAR DESIGN RESULTS AT 564.0 mm AWAY FROM END SUPPORT

VY = -32.76 MX = 2.37 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 17 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 246.76 162.27 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 161.87 161.87 242.58 343.10 422.05

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 22 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 4-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 3-12d 4-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 565.0 mm AWAY FROM START SUPPORT

VY = 44.26 MX = 9.45 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 19 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 162.27 162.27 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 162.27 162.27 162.27 214.75 252.31

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

Page 23 of 63
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 564.0 mm AWAY FROM START SUPPORT

VY = 32.76 MX = -3.78 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 20 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1072.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 268.0 mm 536.0 mm 804.0 mm 1072.0 mm
----------------------------------------------------------------------------
TOP 579.77 377.58 212.10 103.22 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 0.00 103.22 212.31 322.51

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 268.0 mm 536.0 mm 804.0 mm 1072.0 mm
----------------------------------------------------------------------------
TOP 3-16d 2-16d 2-16d 2-16d 2-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 377.0 mm AWAY FROM START SUPPORT

VY = 60.73 MX = -9.70 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

Page 24 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 21 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1017.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.2 mm 508.5 mm 762.7 mm 1017.0 mm
----------------------------------------------------------------------------
TOP 0.00 156.87 314.69 522.30 787.03
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 228.00 109.58 0.00 0.00 21.82

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 254.2 mm 508.5 mm 762.7 mm 1017.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 3-12d 5-12d 7-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 3-10d 3-10d 2-10d 2-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 406.3 mm AWAY FROM END SUPPORT

VY = -70.07 MX = 9.08 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 22 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 4121.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

Page 25 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 1030.2 mm 2060.5 mm 3090.8 mm 4121.0 mm
----------------------------------------------------------------------------
TOP 295.79 0.00 0.00 103.22 423.72
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 146.39 217.25 103.22 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 1030.2 mm 2060.5 mm 3090.8 mm 4121.0 mm
----------------------------------------------------------------------------
TOP 3-12d 2-12d 2-12d 2-12d 4-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 379.0 mm AWAY FROM START SUPPORT

VY = 39.22 MX = 1.09 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

SHEAR DESIGN RESULTS AT 414.0 mm AWAY FROM END SUPPORT

VY = -45.36 MX = 1.09 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 24 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1516.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 714.27 363.59 132.24 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 0.00 126.26 276.79 442.79

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 26 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 10-10d 5-10d 3-10d 2-10d 2-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 3-12d 4-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 402.5 mm AWAY FROM START SUPPORT

VY = 66.70 MX = 6.46 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 25 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1516.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 595.11 339.15 139.41 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 0.00 137.46 280.06 480.22

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 3-16d 2-16d 2-16d 2-16d 2-16d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 2-10d 3-10d 4-10d 7-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

Page 27 of 63
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 377.0 mm AWAY FROM START SUPPORT

VY = 62.21 MX = -7.70 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 26 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3047.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 761.8 mm 1523.5 mm 2285.2 mm 3047.0 mm
----------------------------------------------------------------------------
TOP 471.30 103.62 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 195.32 267.67 215.60

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 761.8 mm 1523.5 mm 2285.2 mm 3047.0 mm
----------------------------------------------------------------------------
TOP 7-10d 3-10d 2-10d 2-10d 2-10d
REINF. 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 4-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 407.9 mm AWAY FROM START SUPPORT

VY = 47.22 MX = -1.26 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

Page 28 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 27 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 162.27 260.83
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 430.65 349.52 246.90 161.87 161.87

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-12d 4-12d 3-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 565.0 mm AWAY FROM END SUPPORT

VY = -43.70 MX = -10.23 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 29 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

Page 29 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 162.27 165.51
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 257.77 219.55 162.27 162.27 162.27

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 564.0 mm AWAY FROM END SUPPORT

VY = -31.80 MX = 4.33 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 30 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1873.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 179.15 103.22 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.22 139.34 256.96 331.99

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 30 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 3-12d 3-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 31 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2248.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 562.0 mm 1124.0 mm 1686.0 mm 2248.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 103.62 290.94
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 331.99 260.07 125.23 0.00 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 562.0 mm 1124.0 mm 1686.0 mm 2248.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 3-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 31 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 32 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1313.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 346.42 194.86 103.62 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.22 103.22 113.66 157.12

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 5-10d 3-10d 3-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 415.0 mm AWAY FROM START SUPPORT

VY = 31.60 MX = 3.47 LD= 48
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 33 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2625.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

Page 32 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 656.2 mm 1312.5 mm 1968.7 mm 2625.0 mm
----------------------------------------------------------------------------
TOP 388.39 132.93 0.00 103.62 191.88
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 103.62 119.41 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 656.2 mm 1312.5 mm 1968.7 mm 2625.0 mm
----------------------------------------------------------------------------
TOP 5-10d 3-10d 2-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 415.0 mm AWAY FROM START SUPPORT

VY = 37.04 MX = 1.99 LD= 47
Provide 2 Legged 8d @ 105 mm c/c

SHEAR DESIGN RESULTS AT 380.0 mm AWAY FROM END SUPPORT

VY = -23.06 MX = 1.87 LD= 46
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 34 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2844.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 711.0 mm 1422.0 mm 2133.0 mm 2844.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 209.05 713.90
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 499.83 432.31 248.98 103.62 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 33 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 711.0 mm 1422.0 mm 2133.0 mm 2844.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 3-10d 10-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 7-10d 6-10d 4-10d 3-10d 2-10d

REINF. 2 layer(s) 2 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 402.5 mm AWAY FROM END SUPPORT

VY = -58.79 MX = -4.72 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 35 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1531.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 382.8 mm 765.5 mm 1148.2 mm 1531.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 564.76 553.00 511.11 441.24 346.57

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 382.8 mm 765.5 mm 1148.2 mm 1531.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-12d 5-12d 5-12d 4-12d 4-12d

REINF. 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 34 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 36 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1072.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 268.0 mm 536.0 mm 804.0 mm 1072.0 mm
----------------------------------------------------------------------------
TOP 177.01 103.62 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 151.27 229.24 298.69

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 268.0 mm 536.0 mm 804.0 mm 1072.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 3-10d 4-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 37 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1016.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 233.89 276.88 318.52 345.55 357.64

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 35 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 4-10d 5-10d 5-10d 5-10d

REINF. 1 layer(s) 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 38 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1016.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 223.77 270.88 307.53 332.53 345.72

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 4-10d 4-10d 5-10d 5-10d

REINF. 1 layer(s) 2 layer(s) 2 layer(s) 2 layer(s) 2 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 36 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 39 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1016.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 345.78 307.77 256.02 200.36 141.21

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 5-10d 4-10d 4-10d 3-10d 3-10d

REINF. 2 layer(s) 2 layer(s) 2 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 40 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1016.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 325.65 302.70 268.33 222.87 167.67

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 37 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 254.0 mm 508.0 mm 762.0 mm 1016.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-12d 3-12d 3-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 42 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1017.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 254.2 mm 508.5 mm 762.7 mm 1017.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 103.62 134.04 231.19
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 244.60 175.11 103.62 103.62 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 254.2 mm 508.5 mm 762.7 mm 1017.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 4-10d 3-10d 3-10d 3-10d 2-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 38 of 63
 STAAD SPACE -- PAGE NO. 33

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 43 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1516.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 103.62 103.62 103.62 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 103.62 103.62 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 44 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1516.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 103.62 0.00 0.00 0.00 103.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 103.62 103.62 103.62 103.62 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 39 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 3-10d 2-10d 2-10d 2-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 45 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1516.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 103.62 103.62 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 103.62 103.62 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 379.0 mm 758.0 mm 1137.0 mm 1516.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 2-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 40 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 46 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1312.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 328.0 mm 656.0 mm 984.0 mm 1312.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 103.62 146.50 260.54
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 175.18 157.86 147.98 116.27 103.22

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.0 mm 656.0 mm 984.0 mm 1312.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 3-10d 3-10d 4-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 380.0 mm AWAY FROM END SUPPORT

VY = -22.98 MX = -5.88 LD= 48
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 47 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1313.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

Page 41 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 0.00 103.62 137.69 307.79 530.58
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 249.46 125.11 103.62 0.00 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 2-10d 3-10d 3-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 4-10d 3-10d 3-10d 2-10d 2-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 372.9 mm AWAY FROM END SUPPORT

VY = -61.94 MX = 1.01 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 48 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1313.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 103.62 103.62 103.62 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 103.62 103.62 103.62 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 42 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 2-10d 2-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 49 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1313.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 103.62 103.62 103.62 103.62 104.09
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 103.62 103.62 103.62 103.62 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 3-10d 3-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 2-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 43 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 50 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1313.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 0.00 103.62 122.97 270.75 473.70
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 193.80 125.15 103.22 0.00 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.3 mm 656.5 mm 984.8 mm 1313.0 mm
----------------------------------------------------------------------------
TOP 2-10d 3-10d 3-10d 4-10d 7-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 2 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 407.9 mm AWAY FROM END SUPPORT

VY = -49.48 MX = 2.08 LD= 41
Provide 2 Legged 8d @ 105 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 51 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1312.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

Page 44 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 328.0 mm 656.0 mm 984.0 mm 1312.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 103.62 103.62 103.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 103.62 103.62 103.62 103.62 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 328.0 mm 656.0 mm 984.0 mm 1312.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 3-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 53 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1873.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 161.87 161.87 161.87 161.87 161.87
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 161.87 161.87 161.87 161.87 161.87

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 45 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM END SUPPORT

VY = -7.08 MX = 4.74 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 55 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1873.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 103.62 103.62
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 103.62 103.62 103.62 103.62 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 468.2 mm 936.5 mm 1404.8 mm 1873.0 mm
----------------------------------------------------------------------------
TOP 2-10d 2-10d 2-10d 3-10d 3-10d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 3-10d 3-10d 3-10d 3-10d 2-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

Page 46 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 58 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 752.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 188.0 mm 376.0 mm 564.0 mm 752.0 mm
----------------------------------------------------------------------------
TOP 224.29 176.58 162.27 162.27 162.27
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 0.00 0.00 161.87 161.87

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 188.0 mm 376.0 mm 564.0 mm 752.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 564.0 mm AWAY FROM START SUPPORT

VY = 35.57 MX = 4.74 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

Page 47 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 60 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2625.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 656.2 mm 1312.5 mm 1968.7 mm 2625.0 mm
----------------------------------------------------------------------------
TOP 180.36 161.87 161.87 161.87 161.87
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 161.87 161.87 161.87 161.87

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 656.2 mm 1312.5 mm 1968.7 mm 2625.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-12d 2-12d 2-12d 2-12d 2-12d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 564.0 mm AWAY FROM START SUPPORT

VY = 20.41 MX = -4.95 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM END SUPPORT

VY = -4.84 MX = -4.95 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 62 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 752.0 mm SIZE: 230.0 mm X 300.0 mm COVER: 30.0 mm

Page 48 of 63
 SUMMARY OF REINF. AREA (Sq.mm)
----------------------------------------------------------------------------
SECTION 0.0 mm 188.0 mm 376.0 mm 564.0 mm 752.0 mm
----------------------------------------------------------------------------
TOP 201.38 138.34 103.22 103.22 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 0.00 0.00 0.00 103.62

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 188.0 mm 376.0 mm 564.0 mm 752.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-10d 2-10d 2-10d 2-10d 3-10d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c @ 105 mm c/c
----------------------------------------------------------------------------

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 63 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 216.76 161.87 0.00 0.00 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 0.00 160.31 283.79 454.76 609.05

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

Page 49 of 63
 SUMMARY OF PROVIDED REINF. AREA
----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-20d 2-20d 2-20d 2-20d 2-20d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM START SUPPORT

VY = 65.34 MX = -4.59 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
B E A M N O. 64 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 2180.0 mm SIZE: 230.0 mm X 450.0 mm COVER: 30.0 mm

SUMMARY OF REINF. AREA (Sq.mm)

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 0.00 0.00 0.00 161.87 220.36
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)

BOTTOM 610.47 455.20 283.36 160.31 0.00

REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
----------------------------------------------------------------------------

SUMMARY OF PROVIDED REINF. AREA

----------------------------------------------------------------------------
SECTION 0.0 mm 545.0 mm 1090.0 mm 1635.0 mm 2180.0 mm
----------------------------------------------------------------------------
TOP 2-12d 2-12d 2-12d 2-12d 2-12d
REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

BOTTOM 2-20d 2-20d 2-20d 2-20d 2-20d

REINF. 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s) 1 layer(s)

SHEAR 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d 2 legged 8d

REINF. @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c @ 140 mm c/c
----------------------------------------------------------------------------

Page 50 of 63
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH) FROM FACE OF THE SUPPORT
-----------------------------------------------------------------------------

SHEAR DESIGN RESULTS AT 529.0 mm AWAY FROM END SUPPORT

VY = -65.40 MX = 4.68 LD= 41
Provide 2 Legged 8d @ 140 mm c/c

============================================================================

********************END OF BEAM DESIGN RESULTS********************

213. DESIGN COLUMN 1 3 4 6 7 9 10 12 56 57 59 61

Page 51 of 63
COLUMN

=========================================================
IS 456 - 2000 C O L U M N D E S I G N R E S U L T S
=========================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 1 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 41 END JOINT: 7 SHORT COLUMN

REQD. STEEL AREA : 1519.49 Sq.mm.

REQD. CONCRETE AREA: 67480.52 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 16 dia. (2.33%, 1608.50 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1632.63 Muz1 : 54.46 Muy1 : 79.34

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 41
END JOINT: 7 Puz : 1664.60 Muz : 56.24 Muy : 83.18 IR: 0.96
============================================================================

Page 52 of 63
============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 3 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 END JOINT: 9 SHORT COLUMN

REQD. STEEL AREA : 383.58 Sq.mm.

REQD. CONCRETE AREA: 47947.11 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 12 dia. (0.66%, 452.39 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1224.55 Muz1 : 25.81 Muy1 : 34.84

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 41
END JOINT: 9 Puz : 1249.27 Muz : 27.89 Muy : 38.31 IR: 0.77
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 4 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 47 END JOINT: 10 SHORT COLUMN

Page 53 of 63
REQD. STEEL AREA : 868.31 Sq.mm.
REQD. CONCRETE AREA: 68131.70 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (1.31%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1398.69 Muz1 : 39.86 Muy1 : 55.88

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 41
END JOINT: 10 Puz : 1411.79 Muz : 41.40 Muy : 58.78 IR: 0.97
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 6 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 END JOINT: 12 SHORT COLUMN

REQD. STEEL AREA : 564.32 Sq.mm.

REQD. CONCRETE AREA: 68435.68 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1289.48 Muz1 : 31.11 Muy1 : 42.65

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 46
END JOINT: 12 Puz : 1375.68 Muz : 38.52 Muy : 54.34 IR: 0.79

Page 54 of 63
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 7 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 49 BRACED LONG(Z) /SHORT(Y)

REQD. STEEL AREA : 979.63 Sq.mm.

REQD. CONCRETE AREA: 68020.38 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.82%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1438.68 Muz1 : 38.12 Muy1 : 53.47

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 49
Puz : 1538.20 Muz : 46.63 Muy : 67.13 IR: 0.80
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 9 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 49 BRACED LONG(Z) /SHORT(Y)

Page 55 of 63
REQD. STEEL AREA : 480.08 Sq.mm.
REQD. CONCRETE AREA: 68519.93 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1259.22 Muz1 : 23.15 Muy1 : 31.30

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 46
Puz : 1375.68 Muz : 32.56 Muy : 45.61 IR: 0.69
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 10 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 48 BRACED LONG(Z) /SHORT(Y)

REQD. STEEL AREA : 806.15 Sq.mm.

REQD. CONCRETE AREA: 68193.86 Sq.mm.
MAIN REINFORCEMENT : Provide 8 - 12 dia. (1.31%, 904.78 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1376.36 Muz1 : 33.42 Muy1 : 46.45

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 48
Puz : 1411.79 Muz : 36.56 Muy : 51.57 IR: 0.90

Page 56 of 63
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 12 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 48 BRACED LONG(Z) /SHORT(Y)

REQD. STEEL AREA : 543.97 Sq.mm.

REQD. CONCRETE AREA: 68456.04 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1282.17 Muz1 : 24.89 Muy1 : 33.81

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 48
Puz : 1375.68 Muz : 32.35 Muy : 45.30 IR: 0.74
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 56 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 END JOINT: 23 SHORT COLUMN

Page 57 of 63
REQD. STEEL AREA : 1110.52 Sq.mm.
REQD. CONCRETE AREA: 67889.48 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 20 dia. (1.82%, 1256.64 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1485.71 Muz1 : 47.95 Muy1 : 68.52

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 41
END JOINT: 23 Puz : 1538.20 Muz : 57.34 Muy : 86.23 IR: 0.79
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 57 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 1500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 END JOINT: 22 SHORT COLUMN

REQD. STEEL AREA : 621.91 Sq.mm.

REQD. CONCRETE AREA: 68378.09 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1310.17 Muz1 : 37.04 Muy1 : 51.29

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 42
END JOINT: 22 Puz : 1375.68 Muz : 42.70 Muy : 60.47 IR: 0.75

Page 58 of 63
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 59 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 BRACED LONG(Z) /SHORT(Y)

REQD. STEEL AREA : 765.83 Sq.mm.

REQD. CONCRETE AREA: 68234.18 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1361.87 Muz1 : 35.53 Muy1 : 49.34

INTERACTION RATIO: 1.00 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 46
Puz : 1375.68 Muz : 37.83 Muy : 53.32 IR: 0.93
============================================================================

============================================================================
IS-456 L I M I T S T A T E D E S I G N
C O L U M N N O. 61 D E S I G N R E S U L T S

M35 Fe500 (Main) Fe500 (Sec.)

LENGTH: 3500.0 mm CROSS SECTION: 300.0 mm X 230.0 mm COVER: 40.0 mm

** GUIDING LOAD CASE: 46 BRACED LONG(Z) /SHORT(Y)

Page 59 of 63
REQD. STEEL AREA : 701.74 Sq.mm.
REQD. CONCRETE AREA: 68298.27 Sq.mm.
MAIN REINFORCEMENT : Provide 4 - 16 dia. (1.17%, 804.25 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 230 mm c/c

SECTION CAPACITY BASED ON REINFORCEMENT REQUIRED (KNS-MET)

----------------------------------------------------------
Puz : 1338.85 Muz1 : 32.76 Muy1 : 45.30

INTERACTION RATIO: 0.99 (as per Cl. 39.6, IS456:2000)

SECTION CAPACITY BASED ON REINFORCEMENT PROVIDED (KNS-MET)

----------------------------------------------------------
WORST LOAD CASE: 46
Puz : 1375.68 Muz : 36.35 Muy : 51.15 IR: 0.89
============================================================================

********************END OF COLUMN DESIGN RESULTS********************

214. CONCRETE TAKE

215. END CONCRETE DESIGN

Page 60 of 63
 ************** CONCRETE TAKE OFF **************
(FOR BEAMS, COLUMNS AND PLATES DESIGNED ABOVE)
NOTE: CONCRETE QUANTITY REPRESENTS VOLUME OF CONCRETE IN BEAMS, COLUMNS, AND PLATES DESIGNED ABOVE.
REINFORCING STEEL QUANTITY REPRESENTS REINFORCING STEEL IN BEAMS AND COLUMNS DESIGNED ABOVE.
REINFORCING STEEL IN PLATES IS NOT INCLUDED IN THE REPORTED QUANTITY.

TOTAL VOLUME OF CONCRETE = 8.0 CU.METER

BAR DIA WEIGHT

(in mm) (in New)
-------- --------
8 2601
10 1338
12 1638
16 1329
20 695
------------
*** TOTAL= 7601

216. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAY 15,2023 TIME= 23:52:24 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

Page 61 of 63
 Annexure-1

Page 62 of 63
 Annexure-2

TWO WAY SLAB DESIGN

2
Grade of Concrete, f ck = 35 N/mm
2
Grade of Steel, f y = 500 N/mm Exposure Condition = MILD

Panel Beam Short Short Depth D Dead Live Finishing Factored Factored Moment (kNm) Area of Steel Reqd (mm2) Bar Dia Spacing Required (mm) Spacing Provided (mm) D, Reqd by Design Comment
Moment Coefficients
Load DL Load Load FL Total Support Span Support Span Support Span Support Span Defelection
S.No. Width Code Span,Lx Span,Ly Ley/Lex (mm) (mm) MF
Support Span LL Load Wu Criteria R/F Area Depth Shear
ID (mm) (m) (m) Dx Dy Dx Dy Assumed kN/m2 kN/m2 kN/m2 Mux Muy Mux Muy Astx Asty Astx Asty X-Dir Y-Dir X-Dir Y-Dir X-Dir Y-Dir X-Dir Y-Dir X-Dir Y-Dir (mm)
kN/m2
1 S 230 4 2.18 4.121 1.8882 0.0879 0.047 0.0663 0.035 120 3 2 0.5 8.25 3.5969 1.9239 2.7147 1.4327 114 114 114 114 10 10 689 689 689 689 200 200 200 200 2 68 OK SUFFICIENT NOT OK
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Page 63 of 63