Xiaomi 13 Pro: Buttons
Xiaomi 13 Pro: Buttons
Xiaomi 13 Pro: Buttons
Buttons
48
SAT. 16 AUG.
Power
Button
Xiaomi 13 Pro
Quick Start Guide
Thank you for choosing Xiaomi 13 Pro
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
For more information, visit our official website:
www.mi.com/global/service/userguide
MIUI
Xiaomi 13 Pro comes pre-installed with MIUI, our customized Android-based OS which
provides frequent updates and user-friendly features based on suggestions from over
200 million active users worldwide. For more information, please visit en.miui.com
About SIM:
Please do not insert non-standard SIM cards into the SIM card slot. They may damage
the SIM card slot.
WARNING: Do not disassemble this device.
WEEE
Special precautions must be taken to safely dispose of this product. This
marking indicates that this product may not be discarded with other
household waste in the EU.
To prevent harm to the environment or human health from inappropriate
waste disposal, and to promote sustainable reuse of material resources,
please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the
retailer where the device was originally purchased.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Additional safety information and precautions can be accessed at the
following link: www.mi.com/en/certification
Important Safety Information
Read all safety information below before using your device:
• Use of unauthorized cables, power adapters, or batteries can cause fire explosion,
electric shock, pose other risks, or damage the device.
• This device’s operating temperature range is 0°C to 40°C. Using this device in an
environment outside of this temperature range may damage the device.
• If your device is provided with a built-in battery, to avoid damaging the battery or the
device, do not attempt to replace the battery yourself.
• Charge this device only with the included or authorized cable and power adapter.
Use only authorized accessories which are compatible with your device.
• After charging is complete, disconnect the adapter from both the device and the
power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste.
Mishandling the battery may cause fire or explosion. Dispose of or recycle the
device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed
or damaged, stop using it immediately.
- Do not short circuit the battery, as this may cause overheating, burns, or other
injury.
- Do not place the battery in a high-temperature environment.
- Overheating may cause explosion.
- Do not disassemble, hit, or crush the battery, as this may cause the battery to
leak, overheat, or explode.
- Do not burn the battery, as this may cause fire or explosion.
• User shall not remove or alter the battery. Removal or repair of the battery shall only
be done by an authorized repair center of the manufacturer.
• Keep your device dry.
• Do not try to repair the device yourself. If any part of the device does not work
properly, contact Mi customer support or bring your device to an authorized
repair center.
• Connect other devices according to their instruction manuals. Do not connect
incompatible devices to this device.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
Safety Precautions
• Observe all applicable laws and rules restricting use of mobile phones in specific
situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere or
potentially explosive environment, including fueling areas, below decks on boats,
fuel or chemical transfer or storage facilities, or areas where the air may contain
chemicals or particles such as grain, dust, or metal powders. Obey all posted signs
to turn off wireless devices such as your phone or other radio equipment. Turn off
your mobile phone or wireless device when in a blasting area or in areas requiring
“two-way radios” or “electronic devices” to be turned off to prevent potential
hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive
care units. Always comply with all rules and regulations of hospitals and health
centers. If you have a medical device, please consult your doctor and the device
manufacturer to determine whether your phone may interfere with the device’s
operation. To avoid potential interference with a pacemaker, always maintain a
minimum distance of 15 cm between your mobile phone and the pacemaker. This
can be done by using your phone on the ear opposite to your pacemaker and
not carrying your phone in a breast pocket. To avoid interference with medical
equipment, do not use your phone near hearing aids, cochlear implants, or other
similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft
when required.
• When driving a vehicle, use your phone in accordance with relevant traffic laws
and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during
thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms. Doing so
may result in electric shock, injury, fire, and charger damage
Security Statement
Please update your phone’s operating system using the built-in software update
feature, or visit any of our authorized service outlets. Updating software through other
means may damage the device or result in data loss, security issues, and other risks.
EU Regulations
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS
/ LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi
2210132G is in compliance with the essential requirements and other relevant
provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for general
population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit:
2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and
RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified power level
in all tested frequency bands and placed in positions that simulate RF exposure during
use against the head with no separation and near the body with a separation of 5 mm.
This device is restricted to indoor use only when operating in the 5150 to 5350MHz
in Hong Kong.
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other
features as ratified in IEEE Standard 802.11 specifications) may vary based on regional
availability and local network support. The function may be added via OTA when and
where applicable.
Ensure the power adapter used meets the requirements of Clause 6.4.5 and Clause
6.4.6 in IEC/EN 62368-1 and has been tested and approved according to national or
local standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and maximum
radio-frequency power:
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE Band 42: 26 dBm
5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78: 29 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23
dBm, 5725 to 5850 MHz: 14 dBm, 5925 to 6425 MHz: 23dBm
NFC: 13.56 MHz < 42 dBuA/m at 10m
WPT: 110~148 Khz < 42 dBuA/m at 10m Distance
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy. The exposure standard for wireless devices employs a unit
of measurement known as Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has
been tested and meets the FCC RF exposure guidelines for use with an accessory that
contains no metal and positions the device a minimum of
1.5 cm from the body. RF exposure compliance with any body-worn accessory that
contains metal was not tested and certified, and use of such body-worn accessory
should be avoided. Any accessory used with this device for body-worn operation must
keep the device a minimum of 1.5 cm away from the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the Class B
FCC limits.
UK Regulations
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands and placed in positions that
simulate RF exposure during use against the head with no separation and
near the body with a separation of 5 mm.
UK
This device is restricted to indoor use only when operating in the 5150 to
5350MHz in Hong Kong.
Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and
other features as ratified in IEEE Standard 802.11 specifications) may vary
based on regional availability and local network support. The function may be
added via OTA when and where applicable.
Ensure the power adapter used meets the requirements of Clause 6.4.5 and
Clause 6.4.6 in IEC/EN 62368-1 and has been tested and approved according
to national or local standards.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU and UK only
and maximum radio-frequency power:
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm, LTE Band 42: 26 dBm
5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78:
29 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to
5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm, 5925 to 6425 MHz: 23dBm
NFC: 13.56 MHz < 42 dBuA/m at 10m
WPT: 110~148 KHz < 42 dBuA/m at 10m Distance
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open Settings and
type “Certification” into the search bar.
Model: 2210132G
2210 indicates that this product will be launched after 202210.
When using this device as a wireless charger it is intended for use as a desktop device
and should not be carried when in this mode. To comply with RF exposure
requirements when using in the wireless charging mode please place the device at a
minimum distance of 20cm from persons.
Model:MDY-14-EG
More Adapter information, visit our offfcial website:
www.mi.com/global/service/userguide
Disclaimer
This user guide is published by Xiaomi or its local affiliated company. Improvements
and changes to this user guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made
by Xiaomi at any time and without notice. Such changes will, however, be
incorporated into new online editions of the user guide (please see details at
www.mi.com/global/service/userguide). All illustrations are for illustration purposes
only and may not accurately depict the actual device.
Control center.......................................................................................................................10
Recents windows..................................................................................................................12
Widgets .................................................................................................................................13
App Downloads.....................................................................................................................15
Transfer files..........................................................................................................................19
Charging ................................................................................................................................20
Display....................................................................................................................................24
Always-on display & Lock screen ........................................................................................26
Wi-Fi .......................................................................................................................................42
Messages ...............................................................................................................................54
Chapter 8 Camera........................................................................................................58
Camera overview ..................................................................................................................58
Take photos...........................................................................................................................59
Take videos............................................................................................................................66
Camera settings....................................................................................................................75
Chapter 9 Gallery.........................................................................................................80
Gallery overview ...................................................................................................................80
Photos ....................................................................................................................................80
Albums ...................................................................................................................................84
Create a clip...........................................................................................................................86
Google....................................................................................................................................92
Mi Browser.............................................................................................................................95
Mi Store..................................................................................................................................96
Mi Video .................................................................................................................................97
Music ......................................................................................................................................99
Notes................................................................................................................................... 100
Security............................................................................................................................... 103
Tools.................................................................................................................................... 113
Weather.............................................................................................................................. 122
Privacy................................................................................................................................. 129
Apps..................................................................................................................................... 132
Vision................................................................................................................................... 140
Google................................................................................................................................. 149
Phone overview
8
2 3
01
Note
!
The illustration is for reference only. The fingerprint sensor may locate on the Power but-
ton or the bottom of the screen.
Note
!
• If you insert two SIM cards, you can set one as the primary mobile data SIM and the
other as the primary calling SIM, or set call forwarding between the two SIM cards.
See Set a default call SIM and Set a default data SIM for more information.
• On different models, the SIM card slot may locate on the side or the bottom of the
phone and the slot appearance may vary.
• Some models may support to insert an SD card on the SIM card slot.
For example:
SIM 2
SIM 1
Micro SD
02
2. Finish the setup wizard.
Note
!
The first time you power on the phone, a setup wizard helps you personalize your
phone, connect to a mobile network or Wi-Fi network, choose to copy Apps and data,
sign in with a Google account or Mi Account, set screen lock, set up Google Assistant,
and other basic settings.
For example, you can see a notification of Android Setup on the notification
panel.
Connect to Wi-Fi
1. Go to Settings > Wi-Fi.
Note
!
Tip
You can swipe down the status bar at the upper-right corner of the phone, then tap
Wi-Fi on the Control center to connect the same Wi-Fi next time.
Add accounts
Sign in to your Google Account
Google Account enables you to access Google Cloud Storage and Apps installed
from your account, and make full use of the Android features.
03
2. Tap Add account.
3. Choose Google.
Note
!
If you do not have an account, you can tap Create account to create one. See Google
for more information.
Note
!
Mi Account will be created automatically when you use a phone number for the first
time. You can also create a Mi Account with an email address.
The phone turns off the screen automatically to save power, secure your privacy,
and goes to sleep when you are not using it. The phone can be locked or un-
locked depending on your screen lock settings.
Note
!
Basic gestures
You can use the simple gestures to control your phone and Apps.
04
Gesture Definition Examples for gesture effects
Button shortcuts
You can take actions with physical buttons to use basic functions or activate
other features.
05
Gesture Description
6:32
Power off and reboot
Press and hold the Power button until the Power off and
Reboot menu appears.
6:32
6:32
6:32
Take a screenshot
Simultaneously press the Volume down button and the
Power button.
6:32
Launch Google Assistant
Press and hold the Power button until the Google assis-
tant appears.
Take a screenshot
You can use the gestures to take a screenshot and a partial screenshot.
Gesture Description
6:32
Take a screenshot
Slide 3 fingers down.
06
Gesture Description
6:32
Note
!
Before you can use the gestures, you need to enable the shortcuts. See Enable Take a
screenshot shortcut and Enable Partial screenshot shortcut for more information.
Home screen
Note
!
07
Full screen gestures
Gesture Description
Go to Home screen
Swipe up from the bottom of the screen.
Open Recents
Swipe up from the bottom of the screen and pause.
Go back
Swipe left or right from the edge of the screen.
Note
!
You can use the above gestures only when you choose full screen gestures mode. You can
see Set full screen gestures for more information.
08
Notification icons and status icons
Note
!
• The network status icon may vary depending on your region and network service provid-
er.
• Because functions vary among different models, some notification icons and status
icons may not be available to your models.
09
Clear the notifications
1. Swipe down from the upper-left of the phone to open the notification panel.
Tip
You can tap at the bottom of the notification panel to clear all notifications.
Control center
You can quickly access the feature shortcuts on the Control center.
1
2
3
10
Toggles on the Control center
Screenshot Flashlight
Vibrate Hotspot
11
Performance mode Mi Remote
Note
!
When you use New version of the Control center, pull down the status bar on
the right to open the Control center. When you use the Old version of the Con-
trol center, pull down status bar to open the Control center. See Choose Control
center style for more information.
Recents windows
Recents windows enable you to view recently-used Apps and switch between
Apps.
• Swipe up from the bottom of the screen when in full screen mode.
• Swipe up from the bottom of the screen when in full screen mode.
12
• Tap when use system navigation buttons.
Note
!
Widgets
Widgets enables you to quickly access the functions of Apps such as Cleaner
function, Clock information, or Weather information.
Add a widget to Home screen
3. Choose a widget and tap the widget to add it to the Home screen.
Tip
If there is not enough space, you can drag the widget to a different Home screen page.
2. Tap Remove.
13
Lock the screen with Widgets
When you are not convenient to press the Power button, tap the lock icon on
the Home screen to quickly lock the screen.
3. Draw the pattern, or enter the PIN or password to unlock the screen.
Unlock the screen with fingerprint
You can tap and hold the fingerprint sensor on the bottom of the screen or on
the side of the phone.
Note
!
• Set screen lock before you add the fingerprint. If you do not have fingerprint data, see
Set up a fingerprint lock for more information.
• Only the finger you registered with fingerprint data can unlock the screen.
14
3. Swipe up from the bottom of the screen.
Note
!
You keep the screen stay on when you are looking at the screen.
Tip
You can also swipe down the status bar to adjust the volume bar on the Control center.
App Downloads
Download Apps from Google Play Store
Google Play Store App is pre-installed on the Home screen. You can download
Apps on the phone.
Note
!
You need to sign in with your Google Account. See Sign in to your Google Account for
more information.
The App icon automatically shows on the Home screen when the it is downloa-
ded.
Download Apps from other resources
When your phone allows to download Apps from other resources, you can fol-
low the instructions of the resources. If your phone does not allow other resour-
ces to download Apps, see Allow to install unknown Apps for more information.
! Caution
Download Apps from unknown or unreliable resources may damage your phone.
15
3. Choose the App that you want to download Apps from.
! Caution
Your phone and personal data are more vulnerable to attack by unknown Apps.
1. Touch and hold an App icon until the pop-up window shows.
1. Touch and hold an App icon until the pop-up window shows, then drag the
App icon to cover another App icon on the Home screen.
The system automatically shows an App folder for the two Apps.
16
Screenshots and Screen recording
Take a screenshot in three ways
You can take a screenshot with the following three ways:
• Press the Volume down button and the Power button simultaneously to take
a screenshot. See Enable Take a screenshot shortcut for more information.
• Slide three fingers down to take a screenshot. See Enable Take a screenshot
shortcut for more information.
• Swipe down from the status bar to open the Control center and tap
Screenshot to take a screenshot.
Enable Take a screenshot shortcut
When you enable the feature, you can slide 3 fingers down on the screen or
press the Volume down button and Power button simultaneously to take a
screenshot.
Before you can use the feature, you need to enable the shortcut. See Enable
Partial screenshot shortcut for more information.
17
4. Tap Save.
Enable Partial screenshot shortcut
When you enable the feature, you can press and hold with 3 fingers on the
screen to take a partial screenshot.
1. Take a screenshot. See Take a screenshot in three ways for more informa-
tion.
3. Scroll up to determine where to end the scrolling screenshot or wait for the
page goes down automatically.
4. Tap DONE.
Note
!
If you want to view and save the scrolling screenshot, you need to give the Gallery Edi-
tor permissions to certain folders.
18
3. Tap to start recording.
Tip
You can enable DND on the Control center to prevent unexpected notifications.
• Tap Video quality to select video quality. Higher quality means bigger file
size.
• Tap Frame rate to select frame rates. Higher frame rates reduce motion
blur.
Transfer files
Transfer files with the ShareMe App
You can use the ShareMe App to transfer files without an internet connection.
Before the phones transfer files, you need to install ShareMe on both phones.
See App Downloads for more information.
19
4. Tap SEND on phone A to connect phone B.
• Wait for the phone A to search for phone B, then tap the phone B name
to connect.
Phone A automatically transfers the selected files to phone B after the con-
nection is established.
Note
!
You can tap Share more files to share more files between phone A and phone B.
2. Choose to use USB for File Transfer/Android Auto in the pop-up windows
on both phones.
3. Select the files of phone A, and then copy and paste or drag and drop the
files to folders of phone B on the computer.
Note
!
When you copy files from phone A to phone B, make sure that the folder names are the
same on both phones.
Charging
You can charge the phone with a power adapter and USB cable. Some models
also support wireless charging.
Charge the phone
When the battery is running low, you need to charge the phone.
20
! Caution
Make sure that the charger and the USB cable are available. To avoid severe damage
and explosions, do not use unauthorized devices to charge the phone.
Wireless charging
You can charge your phone with a wireless charger.
1. Plug the power adapter of the wireless charger into a power outlet and the
USB cable into the wireless charger.
2. Place your phone on the center of the wireless charger with the phone
screen facing up.
Note
!
• Wireless charging may not be available to some phone models. And the support
functionality may vary depending on your device.
• Charging speed may vary depending on device usage, charging conditions and other
factors.
Tip
Some phone models may also support reverse wireless charging. You can go to Enable
Reverse wireless charging to check whether your device supports the feature.
After the wireless charger connects to your phone, the phone displays the
charging status.
21
2. Choose a new wallpaper such as a live image.
3. Tap Apply.
• Tap Set as Lock screen to apply the wallpaper to the Lock screen.
• Tap Set as Home screen to apply the wallpaper to the Home screen.
• Tap Set both to apply the wallpaper both to the Lock screen and Home
screen.
Change the theme
You can change the wallpaper and clock on the Home screen and Lock screen,
set the notification shade, Phone, Messaging and other display, and change the
icons on the Home screen.
1. Open Themes.
5. Tap APPLY.
Note
!
You can also choose to apply the theme to the Lock screen, Home screen, System, or
icons.
2. Drag the sliders to adjust the Media, Ringtone, Alarm volume separately.
Change the ringtones of Notifications, Ringtone, and Alarm
You can customize your ringtones of Notifications, Ringtone, and Alarm sound.
You can set the preset sounds or add the sound from local files or online ring-
tones.
22
2. Tap Notifications , Ringtone , or Alarm to enter the Ringtones page.
Tip
You can also tap More for notification sound or All ringtones for ringtone and alarm
sound to set your ringtones from local files or online ringtones.
Tip
You can also swipe down from the upper-right corner of the phone to enable Mute
in Control center.
Note
!
You can drag the slider below to adjust the haptic feedback level.
23
Display
Select Light mode or Dark mode
Light mode adjusts the phone to fit in strong-light environments. Dark Mode
applies a dark color scheme to the phone to fit in low-light environments.
• Tap Sunset to sunrise. Dark mode applies to your phone at sunset and is
turned off at sunrise.
• Tap Custom. You can turn Dark mode on and off at scheduled time.
Enable Automatic brightness
The phone automatically adjust the brightness when in different light condi-
tions.
Note
!
Screen brightness is optimized according to ambient light. You can still make minor ad-
justments manually.
Tip
You can also swipe down from the upper-right corner of the phone to enable Auto
brightness on the Control center.
24
2. Drag the slider of Screen brightness to adjust the screen brightness manual-
ly.
Tip
You can also swipe down from the upper-right corner of the phone to drag the slider in
the brightness level bar on the Control center.
Note
!
Note
!
Higher refresh rate makes viewing experience smoother but consumes more power.
25
Change the font
You can change the font and style on your phone.
2. Drag the slider from xxs to XXL to change the text size.
Enable Auto-rotate screen
The phone automatically rotates the screen between portrait and landscape po-
sition when your rotate the phone.
Tip
If you want to lock the screen orientation, you can disable the Auto-rotate screen or
swipe down from the upper-right corner of the phone to enable Lock orientation on
the Control center.
1. Go to Settings > Always-on display & Lock screen > Always-on dis-
play.
1. Go to Settings > Always-on display & Lock screen > Always-on display
> Display items.
26
Tip
You can tap to enable Turn off when Battery saver is on to reduce power con-
sumption.
1. Tap to enable Double tap to wake or turn off screen when device is
locked.
Set Lock screen clock format
1. Go to Settings > Always-on display & Lock screen > Lock screen clock
format.
Note
!
• You cannot change the lock screen layout for the third party themes.
27
Display charging animation after device is unlocked
Charging animation keeps displaying after your phone is unlocked except for
video playback and other similar full screen scenes.
Home screen
Set App display on Home screen
You can choose not to display Apps or display the used Apps in the App drawer.
• Tap With App drawer to display the used Apps in the drawer when you
swipe up on Home screen.
Set animation speed
You can select the responsive speed of animation.
28
Set full screen gestures
You can interact with your phone with full screen gestures to quickly navigate,
multitask, and access features.
3. Choose Gestures to use full screen gestures. See Full screen gestures for
more information.
Note
!
• You can tap to enable Hide full screen indicator when you use full screen ges-
tures.
2. Tap Home screen layout to select 4x6 or 5x6 Home screen layout.
Enable Global icon animations
The feature allows the phone to render animations on third party App icons.
29
1. Go to Settings > Home screen.
30
Tip
You can tap Format to choose Show notification and content or Don't show Lock
screen notifications.
31
1. Go to Settings > Notifications & Control center.
• Choose to tap Old version. You can pull down status bar to view toggles
and notifications
• Choose to tap New version. You can pull down status bar on the left to
view notifications and you can pull down status bar on the right to open
Control center.
32
Items shown on the Lock screen after swiping down
You can swipe down the notification panel on the Lock screen. If you use he
new version of Control center, you can also swipe down the Control center on
the right part of the Lock screen and set the Smart home.
1. Go to Settings > Notifications & Control center > Items shown on the
Lock screen after swiping down.
Note
!
If you use the new version of Control center, you can tap to enable Control center
1. Go to Settings > Notifications & Control center > Status bar > Bat-
tery indicator.
33
4. Tap OK.
Note
!
On some models, the Set time automatically feature may be replaced by Use network-
provided time.
Note
!
If you disable the feature, you can select time zone according to your region.
Note
!
1. Go to Settings > Additional settings > Date & time > Time format.
2. Choose 12-hour 1:00 PM, 24-hour 13:00, or Auto (based on system lan-
guage).
Enable Dual clock
The phone shows Dual clock when current time is different from that on the
second clock.
34
1. Go to Settings > Additional settings > Date & time.
Note
!
• You can tap Second clock to choose the region or time zone of the second clock.
• Dual clock is displayed on the Lock screen, Home screen, and turned off screen.
1. Go to Settings > Additional settings > Languages & input > Languag-
es.
Note
!
35
Tip
When your phone is charged, you can view the remaining fully charging time and
charged battery capacity.
Note
!
You can also choose Balanced or Performance mode. Balanced mode is recommended
for normal use. Performance mode increases phone performance, but consumes more
power.
Tip
You can also swipe down from the upper-right corner of the phone to enable Bat-
tery saver on the Control center.
Tip
You can also swipe down from the upper-right corner of the phone to enable Ultra
battery saver on the Control center.
36
1. Go to battery settings. See Go to battery settings for more information.
Note
!
You may have no or more battery usage issues to fix or optimize in real situations.
3. Tap the line chart and view the power consumption in detail below.
Tip
You can drag the slider of Charging limit to set the battery capacity. When the battery
reaches the charging limit, the phone stops reverse wireless charging.
37
Note
!
You can now place other phones or wearable devices with Qi wireless charging
functionality on the back center of your phone.
Tip
You can swipe down the status bar and tap Mobile data to enable mobile data on
the Control center.
38
Note
!
Only when the phone is inserted with two SIM cards, you can disable one SIM card.
3. Tap Edit SIM card name or Edit SIM card numberto change the name or the
number.
4. Tap OK.
Manage advanced settings
1. Go to Settings > SIM cards & mobile networks > Advanced settings.
• Use mobile data during VoLTE calls on the secondary SIM: During
VoLTE calls, the phone connects to a mobile data network with the sec-
ondary SIM. But you can set the feature when you insert two SIM cards.
39
Use an eSIM card
eSIM card is a virtual SIM card that occupies no space on the SIM card slot. The
function of an eSIM card is similar to a physical SIM card. You can also make
calls, send messages, and use mobile data.
Note
!
A customer service representative may ask you for the embedded-SIM ID (EID)
information when you apply for an eSIM card. You can go to Settings > SIM
cards & mobile networks to enable Use eSIM, then go to Manage eSIM > >
View device EID to view the information.
Note
!
You can apply for multiple eSIM cards, but some phone models only supports one eSIM card
in use at a time.
After you set up the region that suppots eSIM cards in the Setup Wizard, the
phone checks SIM cards and eSIM cards automatically.
• Scan the image from Gallery . When you are not convenient with your
camera, you can save the QR code provided by the carrier as an image.
And then tap Gallery to choose the image for scan.
• Tap Add manually instead below the scanner to use activation code pro-
vided by your carrier.
40
5. Follow the onscreen instructions to add and activate an eSIM card.
Note
!
If two SIM cards are detected, the eSIM card activation process in Setup Wizard will be
skipped. You can set up later in Settings. See Add an eSIM card from Settings for
more information.
4. Tap Add mobile plan to choose to add a mobile plan. See Choose to add a
mobile plan for more information.
Note
!
• eSIM card and SIM 2 cannot be used at the same time. If you insert dual SIM cards
or SIM 2 on your phone, eSIM card cannot be activated. To use eSIM card, you need
to disable SIM 2 and switch to eSIM card.
• Disable mobile plan: If you want to use other eSIM cards, you can disable
the current eSIM card.
41
• Change nickname: You can change a new name for the eSIM card.
• Delete mobile plan: If you delete the eSIM card, you will permanently de-
lete XIAOMI PROFILE from the phone. The eSIM card will not be restored
and displayed in the eSIM list.
Note
!
• Delete an eSIM card does not cancel any mobile data plans you have purchased
from a carrier.
4. Tap Reset.
Note
!
But resetting eSIM cards does not cancel any data plans you have purchased from a car-
rier.
Wi-Fi
You can go to Settings > Wi-Fi to connect to a Wi-Fi network. See Con-
nect to Wi-Fi for more information.
Note
!
42
4. Tap OK.
You device stops connecting to the network automatically. You may need to
enter the password when you connect to the network again.
Connect to a hidden Wi-Fi network
Hidden networks do not broadcast their names. If you want to connect to it,
you need to enter the information manually. You can ask the network adminis-
trator for the name and password before you begin.
• Security: Select a security option from the list, and enter the password if
required.
5. Tap .
Choose Wi-Fi assistant
Wi-Fi assistant helps optimize connection and accelerate network.
• Tap to enable Stay connected. The feature allows the device to con-
nected to other available Wi-Fi networks or use mobile data when your
current Wi-Fi network cannot connect to the internet.
Note
!
The feature is enabled in Balanced by default. You can also choose Fast connection
to give priority to the Apps you are using while making the background download
speed lower.
43
• Tap Dual band Wi-Fi speed boost to boost Wi-Fi speed by connecting to
auxiliary networks.
• Tap to enable Use mobile data to boost speed. The feature allows
the device to use mobile data to boost connection speed. Use the feature
may generate additional carrier fees.
Note
!
The features may not be available to some models. And the feature paths on different
models may vary.
• Wi-Fi Direct: Wi-Fi Direct enables the phone to connect other Wi-Fi Di-
rect devices at anywhere and anytime, even when there is no access to a
Wi-Fi network nearby.
The following steps take the connection between Xiaomi or Redmi phones as an
example.
44
4. Tap Pair in the pop up windows of the two devices.
Note
!
• In the pop up windows, you can also choose to block the Bluetooth device if you do
not want to connect to the device.
• The two devices need to enable Bluetooth and stay in an effective distance. The
phone searches for devices automatically, then you can see the names of available
devices.
Tip
You can also swipe down from the upper-right corner of the phone to enable Blue-
tooth on the Control center.
4. Tap Unpair.
Rename a device
When you enable Bluetooth, other nearby devices can see the name.
3. Tap .
Manage advanced settings
• Show Bluetooth devices without names: The names of the Bluetooth de-
vices are not displayed and only the MAC addresses are displayed.
45
Portable hotspot
Enable Portable hotspot
Turn on the Portable hotspot and your phone can provide an internet access to
other devices.
Tip
• You can tap Share QR code to share Wi-Fi network.
• You can swipe down from the upper-right corner of the phone to enable Hot-
spot on the Control center.
2. Tap Set up portable hotspot to change the portable hotspot name or pass-
word.
3. Tap .
46
Note
!
If you share items with other phones, make sure that both of the phones turn on Mi
Share. You can check the list of supported devices on the official website of any selec-
ted brand.
Tip
You can also swipe down from the upper-right corner of the phone to enable Mi
Share on the Control center.
Note
!
You need to turn off Portable hotspot before you enable Cast.
Tip
• You can go to Settings > Connection & sharing > Cast > Help to learn casting
information.
• You can also swipe down from the upper-right corner of the phone, then tap to
enable Cast on the Control center.
Add VPN
A Virtual Private Network (VPN) enables you to send and receive data across
shared or public networks. A VPN encrypts the connection between the device
and the internet and it can increases the functionality, security, and manage-
ment of the private network.
47
Note
!
You need to set a screen lock to save your VPN settings. See Set up Screen lock for more
information.
Note
!
If you connect a VPN successfully, you can see that the VPN icon shows at the upper-
right corner of the phone.
Tip
You can also swipe down from the upper-right corner of the phone to enable Air-
plane mode on the Control center.
Enable NFC
Near Field Communication ( NFC) is a short-range wireless connectivity technol-
ogy. It supports data exchange or mobile payment when the phone touches
other compatible devices or brought within a few centimeters of each other.
48
2. Tap to enable NFC.
Note
!
Tip
You can also swipe down from the upper-right corner of the phone to enable NFC
on the Control center.
You need to install a payment App on your device, add a credit card, and enable
the payment service first.
Note
!
HCE Wallet : The HCE, namely Host Card Emulation, is the technology used to emu-
late a credit or debit card on the phone. Only mobile payment with the HCE option
works on Xiaomi or Redmi phones.
49
Make a Call
Make a call with Dialpad
1. Tap Phone.
4. Tap Call
to make a call.
Make a call from Favorites
2. Choose a contact.
50
Make video calls
You can make video calls from Dialpad , or Recents and Contacts tabs.
• On Dialpad , after you enter the phone number, you can tap Video call to
make a video call.
• On Recents tab, you can tap the phone number of a recent contact, then tap
Video call to make a video call.
• On Contacts tab, Choose a contact and tap Video to make a video call.
Note
!
Not all devices support video calling. The receiver has the option to accept the video call or
answer the call as a regular voice call.
Answer a call
51
Decline a call
3. Choose to save the contact to the device, Google account, or SIM cards.
52
4. Enter the information such as the name, the organization, and the phone
number of a contact.
5. Tap Save.
View call history
You can view all incoming calls, outgoing calls, and missed calls.
1. Tap Phone.
1. Tap Phone.
• Caller ID & spam: You can set the Caller ID and spam ID to identify busi-
ness calls and prevent suspected spam calls.
• TTY mode: TTY mode is an abbreviation that refers to all types of telety-
pewriters. TTY mode helps people who are hearing impaired or have diffi-
culty in speaking.
• Assisted dialing: Assisted dialing predicts and adds a country code when
you make a call abroad.
• Blocked numbers: You do not receive calls or texts from blocked num-
bers.
• Calling accounts: You can manage the calling accounts, call forwarding,
call waiting, and incoming call settings.
• Display options: You can set the display of contacts and phone themes.
• Nearby places: When you search from Phone, the feature needs your
location to find nearby places that match your query, even if they are not
in your contacts.
• Quick responses: You can set to show buttons for ending call and sending
SMS.
53
• Sounds and vibration: You can change the ringtone for calls and adjust
the volume.
• Caller ID announcement: The caller's name and number are read out
loudly for the incoming calls.
• Flip To Silence: You can place your phone face down on a flat surface to
silence the incoming call.
Messages
You can use Messages to send and receive texts, photos, videos, and audio
messages. You can also share GIFs, stickers, locations, contacts, and files with
others.
3
1 2
Send a message
You can send a text message to a contact to start a conversation.
1. Open Messages.
54
Send MMS messages to a group
Multimedia Messaging Service (MMS) enables you to send a message with multi-
media content to a group of contacts. The multimedia includes pictures, audio,
phone contacts, and videos.
1. Open Messages.
3. Tap Create group and add one or more contacts to the new MMS group.
6. Tap the text field to text an MMS message or tap the attachment icons to
add multimedia content.
7. Tap .
View a message
1. Open Messages.
2. Select a message.
1. Open Messages.
1. Open Messages.
3. Tap .
55
Archive a conversation
You can archive conversations to the archived folder.
1. Open Messages.
3. Tap .
Tip
You can also swipe a conversation left or right to archive the conversation.
1. Open Messages.
1. Open Messages.
1. Open Messages.
56
4. Tap Block.
5. Tap OK.
Note
!
Pair a device
1. Open Messages.
1. Open Messages.
5. Tap OK.
View an archived conversation
1. Open Messages.
3. Tap Archived.
1. Open Messages.
57
Note
!
1. Open Messages.
• Hear outgoing message sounds : When you send an SMS or MMS mes-
sage through the Messages App, a signal sounds serves as a confirmation.
• Automatic previews: The feature works with your message data while
keeping your messages private.
Chapter 8 Camera
Camera overview
You can get a full view of the Camera layout.
1 12
2 11
3
5 10
6 8
58
1. Flash 2. HDR 3. AI camera
4. Viewfinders 5. Zoom levels 6. Gallery
7. Shutter button 8. Switch button 9. Camera modes
10. Beautify 11. Google Lens 12. More
Note
!
Open Camera
You can open Camera with the following methods:
• Touch and hold and swipe left to open the Camera when the screen is
locked.
Tip
You will not be able to see your Gallery items if you launch Camera on the Lock screen
without verifying your password.
Take photos
The default camera mode is Photo, you can swipe left or swipe right to choose
other modes to shoot.
1. Open Camera.
2. Adjust the basic camera features based on your needs. See Basic features for
more information.
• Documents: Take a picture for a document. See Take Documents mode pho-
tos for more information.
• Pro: Take professional photos and videos. See Pro mode for more informa-
tion.
59
• Portrait : Apply Cinematic , Beautify , or Filters effects to your photos. See
Take photos in Portrait mode for more information.
• Short video: Shoot videos up to 10 seconds long and apply filters effects. See
Take videos in Short video mode for more information.
• VLOG: Use diverse vlog scenes. See Take videos in VLOG mode for more in-
formation.
• Slow motion: Take a video with a slow-motion effect. See Take videos in Slow
motion mode for more information.
• Time-lapse: Take videos and condense the videos with a higher speed. See
Take videos in Time-lapse mode for more information.
• Long exposure: Take long exposure photos. See Take photos in Long expo-
sure mode for more information.
• Clone mode: Apply clone effects to your photos or videos. See Clone mode
for more information.
Note
!
Basic features
You can use the basic features to adjust the brightness and exposure of the
photo or zoom in or out to customize your shot.
Set the focus
1. Open Camera.
2. Tap the screen to show the focus ring and exposure setting.
60
1. Open Camera.
2. Tap the screen to show the focus ring and exposure setting.
1. Open Camera.
Tip
On some models, you can also toggle the zoom levels such as 0.6X, 1X, and 2X to zoom
in or zoom out. For a more precise zoom, pinch the screen to 2X zoom level and then
you can drag the slider left or right to zoom in or out.
1. Open Camera.
2. Tap .
1. Open Camera.
2. Point the camera at the QR code, then tap the notification that appears.
Note
!
If you want to enable Scan QR codes, see Enable Smart suggestions for more informa-
tion.
Useful features
You can use the useful features such as the Gridlines and Tilt-shit to improve
your shot or Timer and Voice shutter to help take group photos.
61
Note
!
1. Open Camera.
1. Open Camera.
1. Open Camera.
1. Open Camera.
1. Open Camera.
62
3. Tap Gridlines to show gridlines.
Tip
You can tap to choose different gridline types.
Enable Macro
Macro enables you to take photos or videos of an object in a close distance.
1. Open Camera.
3. Tap Macro.
Enable Tilt-shift
You can use Tilt-shift to make certain area clear and other places blurred in your
photo.
1. Open Camera.
Note
!
• You can move the tilt-shift area to the place that you want to blur or be clear.
1. Open Camera.
63
1. Open Camera.
2. Tap .
3. Tap .
Tip
The camera enables automatic HDR by default. You can also tap to make HDR al-
ways on.
Enable AI camera
AI camera identifies subjects and scenes intelligently and optimizes the camera
settings accordingly. It can identify a variety of scenes, such as blue sky, snowy
weather, sunrise and sunset, greenery, and document.
1. Open Camera.
When you are taking a photo, AI camera shows the identified icons.
For example, the camera identifies the plant as flowers, then it applies suitable
effects.
You can apply Movie filters in Pro mode when you take a video.
64
1. Open Camera.
3. Tap .
1. Open Camera.
3. Tap .
Add Beautify and Filters effects
Beautify helps beautify the body part that you want to. Filters helps apply a
filter effect.
You can add Beautify and Filters effects in Photo and Portrait modes and add
Beautify and Bokeh effects when you take a video.
1. Open Camera.
1. Open Camera.
Note
!
You can adjust video resolution and frame rate in both Pro and Video modes when you
take a video.
65
Take a selfie
Use the front camera to take a selfie in Photo or Portrait mode or to take a vid-
eo. The following steps take Photo mode as an example.
1. Open Camera.
Tip
You can tap to apply Beautify and Filters effects. See Add Beautify and Filters ef-
fects for more information.
Take videos
Take videos to capture the beautiful scenes and important moments.
1. Open Camera.
Tip
When taking a video, you can tap to pause your shooting and tap to continue.
66
When you tap Documents for the first time, the option is not present. You can
tap Documents again after downloading.
1. Open Camera.
3. Point camera at the subject and wait for the camera to identify the docu-
ment area in the yellow frame.
Tip
Pro mode
You can adjust the white balance, focus, shutter speed, ISO sensitivity, exposure
verification, lenses, and other features to take professional photos and videos.
Pro features
Pro features enables you to adjust different parameters to achieve the effects
that you want. You can take creative photos and videos of your own style. The
following are Pro features and their functions:
• Tap WB to select the white balance effects. When you shoot in different en-
vironments, you can apply the corresponding WB effects such as incandes-
cent, daylight, and cloudy.
• Tap F and drag the slider to adjust the focus. When your camera is close to a
subject, you can drag the slider to the left side. When your camera is far away
from a subject, drag the slider to the right side.
• Tap S and drag the slider to adjust the shutter speed. When you shoot a sta-
tionary scene or portrait, you can lower the shutter speed. When you shoot a
moving object, increase the shutter speed.
• Tap ISO and drag the slider to adjust ISO sensitivity. When you shoot in a
low-light condition, you can increase the ISO value. When you shoot in a
bright condition, decrease the ISO value.
• Tap EV and drag the slider to adjust exposure verification. When you shoot in
a low-light condition, you can increase the EV value. When you shoot in a
bright condition, you can lower the EV value.
67
• Tap LENS to select lenses. You can tap for ultra-wide photos or for wide
photos.
Tip
• You can go to Camera > > Settings to enable Exposure verification. The
feature highlights underexposed areas in blue and overexposed areas in red and helps
you to adjust exposure accordingly.
• You can go to Camera > > Settings to enable Focus peaking. The feature
places a red highlight on the in-focus area and helps you to adjust focus accordingly.
1. Open Camera.
3. Adjust the Pro features such as WB, F, S, ISO, EV, LENS and Metering
modes. See Pro features for more information.
68
Take videos in Pro mode
1. Open Camera.
4. Adjust the Pro features. See Pro features for more information.
Note
!
When taking a video, you can tap to pause your shooting and tap to continue.
69
1. Open Camera.
• Tap and drag the slider to adjust the aperture. A lower aperture value
creates a more blurred background behind the portrait.
Tip
1. Open Camera.
2. Select Night.
3. Tap .
70
Note
!
1. Open Camera.
1. Open Camera.
2. Select More.
3. Tap Panorama.
6. Keep the camera align with the arrow and move according to the arrow di-
rection when you are shooting.
Note
!
• You can tap to change the starting scene from horizontal level to vertical level.
You can tap to change the start direction from left to right or from bottom to
top.
• If you finish the Panorama photo all the way along the reference line, it ends auto-
71
Take videos in Short video mode
You can apply different effects to take a short video for 1 to 15 seconds.
When you tap Short video for the first time, the option is not present. You can
tap Short video again after downloading.
1. Open Camera.
2. Select More.
When you tap VLOG for the first time, the option is not present. You can tap
VLOG again after downloading.
1. Open Camera.
2. Select More.
3. Tap VLOG.
72
Tip
When you finish a vlog clip, you can tap to preview the clip.
Note
!
1. Open Camera.
2. Select More.
1. Open Camera.
2. Select More.
3. Tap Time-lapse.
Tip
You can use a tripod to keep your camera steady when you are shooting.
73
Take photos in Long exposure mode
Long exposure mode keeps the shutter open for a period of time. When you
shoot a waterfall, a crowded street, or moving light, long exposure can capture
the trail of the objects.
When you tap Long exposure for the first time, the option is not present. You
can tap Long exposure again after downloading.
1. Open Camera.
2. Select More.
Tip
You can use a tripod to keep your phone steady when you are shooting to get a clear
photo.
Clone mode
Clone mode supports to take photos or videos of the same person at some in-
tervals in one photo or video. You can take many creative photos and videos.
When you tap Clone for the first time, the option is not present. You can tap
Clone again after downloading.
Take photos in Clone mode
1. Open Camera.
2. Select More.
3. Tap Clone.
5. Point the camera to the subject and wait for the camera to identify your
subject.
74
Note
!
1. Open Camera.
2. Select More.
3. Tap Clone.
5. Point the camera to the subject and wait for the camera to identify your
subject.
Note
!
Camera settings
You can go to Camera > > Settings to open Camera settings.
Add a watermark
You can protect your photos with watermarks or add other information such as
time, location, or temperature to the photo.
2. Tap Watermark.
Note
!
You need to tap to enable Device watermark first before you add the custom
watermark.
75
Enable Smart suggestions
1. Open Camera settings.
• Tap to enable Scan QR codes. The feature only enables the rear cam-
era to scan QR codes in Photo mode.
Enable Notify about orientation
The camera notifies about orientation when the phone is parallel to the ground.
Note
!
2. Tap to enable Auto night mode. The feature is usually enabled by de-
fault.
Enable HEIF format
High efficiency image file format saves storage space.
76
Note
!
You cannot take live photos and remove watermarks in HEIF mode.
2. Tap Volume buttons function to choose Shutter, Timer (2s), Zoom, or Vol-
ume.
Tap to take a photo
You can tap the preview screen to take a photo.
• Tap Feature Layout to rearrange the icons on both camera start screen
and More features screen.
77
• Tap Sound to select Default, Retro, Film, or Modern.
Save location info
The location information is saved when you take a photo. You can go to Gallery
to view location info in the photo detailed information.
78
2. Tap Restore default settings.
3. Tap OK.
More settings
Mirror front camera
1. Open Camera.
1. Open Camera.
• Tap to enable Allow tagging videos. You can tap Tag while shooting
a video to go back to tagged moment during playback.
• Tap to enable Shoot with screen off. While shooting, the phone
turns off screen after 3 minutes of inactivity to save power.
Set camera settings in Pro mode
1. Open Camera.
5. Choose to set camera. See Set camera settings in Video mode for more in-
formation when taking a video.
79
Chapter 9 Gallery
Gallery overview
Open Gallery to view all the visual media stored on your phone. You can view,
edit, and manage pictures and videos.
Photos
You can view photos and videos organized by days, months, or years.
View pictures
2. Choose a picture.
80
• Tap Filter to add color effects.
• Tap Sticker to make your selfies cooler with lots of funny stickers.
• Tap Frame to add a frame to the picture and change the aspect ratio.
6. Tap Save.
Tip
You can touch and hold to see the original picture and release to see the adjusted
picture.
Manage pictures
You can add the photos to albums, set the photo as wallpaper, and view or edit
the detailed information of the photo.
2. Choose a picture.
81
• Tap Rename to change the picture name.
• Tap Google Lens to identify the photo. The feature may not be available
to some models.
2. Choose a video.
• Tap Pro to switch to the Video editor to adjust the video. See Edit a video
with Video editor for more information.
4. Tap Save.
Manage videos
You can add the videos to albums, set the videos as wallpaper, compress the
videos, and view or edit the detailed information of the videos.
82
2. Choose a video.
3. Tap .
3. Tap .
Note
!
You can go to Gallery > Albums to view the favorite photos and videos in Favorites
album.
3. Tap .
83
Tip
You can also touch and hold an item to select multiple photos or videos to delete.
Albums
Your photos are organized automatically by categories, such as Favorites, Cam-
era, Screenshots and screen recordings, and Videos. You can view the organized
albums or create new albums.
Create an album
You can create albums and add photos to the albums to categorize your photos
and videos.
Tip
You can also choose not to add photos or videos to the album.
Rename an album
3. Tap Rename.
5. Tap OK.
Note
!
You cannot rename the default album name such as All photos, Camera, Favorites,
Videos, and Screenshots and screen recordings.
Hide albums
You can hide albums to protect your privacy. The hidden albums do not show on
your Albums tab.
84
3. Tap Hide.
Note
!
If you want to view the hidden albums, you can see View hidden albums for more infor-
mation.
Delete albums
3. Tap Delete.
3. Tap More.
1. Open Gallery.
85
• Tap Templates to select a template.
• Tap Editor to add transitions or new videos and cut the video into seg-
ments.
• Tap Soundtracks to adjust the volume levels and add background music
or sound to the video.
7. Tap Save.
Create a collage
You can combine multiple photos into a single image and apply an interesting
layout.
1. Open Gallery.
3. Tap Collage.
4. Select 1 to 6 photos.
• Tap Layout to select a layout. Then you can tap Margins to add margins
and tap Aspect ratio to change the aspect ratio of the whole collage.
7. Tap Save.
Create a clip
You can share photos from Gallery by creating a slideshow of your pictures
with video effects and music.
86
1. Open Gallery.
3. Tap Clip.
6. Tap Save.
Note
!
You can choose to create a video for 10s or Longer video at the upper-middle of the
phone.
1. Open Gallery.
6. Press and hold the video effects to apply different effects to the video.
7. Tap Save.
Free up space
Free up space clears photos in your Gallery to free up storage space.
1. Open Gallery.
87
The system starts scanning the Gallery automatically.
1. Open Gallery.
3. Tap Sort.
4. Choose an album sort format from Custom , Name , Created , or Last upda-
ted.
1. Open Gallery.
Note
!
You can also go to Gallery > Albums > > Grid view to view albums in grid format.
Gallery Settings
Enable Select best photo
MIUI analyzes similar photos and marks the best photos for you.
Select best photo is enabled by default. You can also disable the feature to re-
move marks from photos.
1. Open Gallery.
3. Tap Settings.
88
View hidden albums
1. Open Gallery.
3. Tap Settings.
Tip
If you want to hide albums, you can see Hide albums for more information.
1. Open Gallery.
3. Tap Settings.
5. Tap OK.
Loop all slides
When you browse photos in slide show, you can loop all slides.
1. Open Gallery.
3. Tap Settings.
1. Open Gallery.
3. Tap Settings.
89
• Tap to enable Share without location info by default to remove lo-
cation info from shared photos. Share without location info by default is
enabled by default.
1. Open Gallery.
3. Tap Settings.
4. Tap to enable Convert HEIF before sending. The feature is usually ena-
bled by default.
Chapter 10 Apps
Note
!
When you use Apps, certain permissions such as the access to location info and camera
need to be allowed. You can give limited permissions to the Apps and withdraw the consent
at any time.
File Manager
File Manager is an easy and powerful file explorer. It helps you easily manage
storage on your device, network-attached storage, and cloud storages. You can
also find how many files and apps you have on your device at a glance immedi-
ately after opening the App.
Document view
You can tap to view documents. They are sorted into various categories, such
as images, videos, docs, music, APKs, Bluetooth & downloads, and archives. You
can tap the corresponding category to locate a document.
Storage statistics
You can tap to check what files occupy the internal storage of your device at
a glance and see all the items in the root folders.
90
Share files
• Tap Add to favorites to add the file to Favorites folder in More of Inter-
nal storage.
• Tap Open in another app to open the file with other Apps.
91
3. Tap Private files
Note
!
If you enter the private files for the first time, you need to sign into your Mi account or
Google account and set a privacy protection password.
Clear up space
The system automatically scans for trash files from Cache files, Obsolete
files, Packages, Residuals, and Memory.
Google
Assistant
You can use Assistant to get stuff done faster. Instead of performing tasks
manually by tapping your finger on the screen a gazillion times, you can get the
job done by using voice commands. Assistant is smart and very well integrated
with Android.
You can use Calendar to view schedule information, set reminders, and add
tasks or events.
92
Contacts
You can use Contacts to keep all your contact information in one place and
reach several people at once. You can organize, review, and merge your con-
tacts, create personal mailing lists, and quickly send messages to groups of peo-
ple you contact the most, without entering their addresses individually.
Drive
With Drive, you can open, view, rename, and share files saved to your Drive
cloud account.
Gmail enables you to send and receive an email with Google's web-based
email service.
With Google, you can find online content that interests you, and turn on
your personalized feed to receive customized content.
With Google One, you can automatically back up your phone and manage
the Google cloud storage.
• You can use the Google account to automatically back up photos, contacts,
messages, and other important things. If you break, lose or upgrade your
phone, you can restore everything to your new Android device.
Note
!
• You can manage your Google account storage across Drive, Gmail, and Pho-
tos.
93
Home
With Home, you can control and manage lights, cameras, TVs, and more
compatible devices all from one place.
Maps
You can use Maps to get directions and other location-based information.
! Attention
With Podcasts, you can play the latest episodes from your favorite shows, ex-
plore podcast recommendations, and manage your listening activities.
You can use YouTube to watch and upload videos right from your device.
You can stream and browse playlists, albums, and artists from YT Music.
94
Files
Files is a file management App that takes less storage on your phone. With
Files, you can view files into categories, free up storage and get cloud backup,
and share files with others nearby that have the same App.
Mi Browser
Mi Browser is a fast and secure full-featured web browser for mobile devices.
You can use Mi Browser to surf the web, browse news, search for things, watch
videos, shop online, and play online games. You can also use Mi Browser to
download images and videos from social media, use file management tools, and
set private folders.
Search or open web address
1. Open Mi Browser.
1. Open Mi Browser.
1. Open Mi Browser.
95
Enable Incognito mode, Dark mode, or Desktop mode
• Incognito mode: Incognito mode allows you to browse the web safely
and privately without leaving any search or browsing history.
• Dark mode: The dark color scheme can boost visual experience in low-
light environment.
• Desktop mode: Desktop mode enables you to browse web pages similar
to the look on computer desktop.
Mi Store
You can check the latest marketing sales, view the information about Xiaomi
products, buy the latest Xiaomi products, and ask for support in Mi Store.
Find products
You can browse and search for your interested products.
1. Open Mi Store.
Note
!
You can view products that are categorized as Smartphone , Smart Home , and
Lifestyle. You can also view the discount products on the page.
Buy a product
1. Open Mi Store.
Note
!
5. Sign in to your Mi Account and complete your address and other informa-
tion.
96
6. Tap Pay now and verify your password.
Get service support
You can get service support when you have questions about your orders.
1. Open Mi Store.
1. Open Mi Store.
You can see the Unpaid , Shipping , Reviews , and Returns order informa-
tion.
Mi Video
Mi Video is a powerful local video player. With Mi Video, you can play, down-
load, stream, and manage your videos in one place. You can easily zoom in and
out on the played videos.
Play videos
1. Open Mi video.
You can view your local videos in Videos, Folders, and Playlist categories.
1. Open Mi video.
97
Useful features in side panels
When you play a video, you can use useful features to add more effects to your
video.
Activate back-
Browse the playlist.
ground playback.
1. Open Mi video.
Gesture Function
98
Swipe up or down at the left part of the screen to adjust
the brightness.
Manage videos
You can share, rename, delete, and hide the videos.
1. Open Mi video.
3. Manage videos.
Music
You can use Music to stream and browse playlists, albums, and artists. You
can also play music saved on your phone.
Play your music
1. Open Music.
1. Open Music.
99
1. Open Music.
• Tap Headphones & audio effects to enable Dolby Atmos and adjust
graphic equalizer.
1. Open Music.
Notes
You can take notes with text, images, audio, and mind maps.
Create a note
1. Open Notes.
Tip
• You can add audio, images, sketches, checklists, and other items in a note.
• You can also apply a heading style, bold or italic font, a bulleted or numbered list,
and more items to change the formattings.
1. Open .
100
4. Tap to stop the recording.
Tip
Delete a note
1. Open Notes.
3. Tap Delete.
Manage notes
You can hide, pin, delete, move note, and create a folder to categorize notes.
1. Open Notes.
• Tap Create a folder to add notes to a folder when you choose multiple
notes.
Restore deleted notes
1. Open Notes.
3. Tap Trash.
5. Tap Restore.
Create a new folder
1. Open Notes.
101
2. Tap on the start page.
5. Tap OK.
Tip
You can also press and hold a note and then drag it over another note to create a fold-
er.
Search notes
1. Open Notes.
1. Open Notes.
2. Swipe down from the upper part of the screen and then release.
1. Open Notes.
5. Tap Done.
Note
!
• You can set a reminder and a repeat interval of each subtask checklist.
102
Security
You can use Security to clean up phone storage, manage Apps and permis-
sions, filter and block spam calls and messages, and protect your phone from
hidden viruses or malicious Apps.
App lock
App lock helps protect your privacy. See App lock for more information.
Battery and performance
Use Battery & performance to test the power consumption and optimize
battery-related items. See Chapter 4 Battery and maintenance for more infor-
mation.
Blocklist
Blocklist automatically filters all types of spam, phishing, and marketing calls
and messages. Blocklist displays the history of your filtered SMS messages
and incoming calls.
Note
!
Highlighted phone numbers indicate unread messages or calls. Phone numbers go from red
to black after you read corresponding messages or call history.
Enable Blocklist
You can add phone numbers to the blocklist.
103
• Tap a call in the call history to dial or send a message.
Tip
You can touch and hold a phone number to delete multiple items.
Manage blocklist
Use phone numbers, prefixes, and locations to establish blocking condition.
3. Manage blocklist.
• Tap Blocked numbers to block calls and messages from specific numbers.
Use Boost speed to helps your phone work faster. The feature clears cache
and memory of the running third-party Apps, running system Apps, and locked
running Apps.
Cleaner
Use Cleaner to delete useless items that stored on the phone and make the
phone work fast and productively.
104
Clear trash
Cleaner scans trash of cache files, obsolete files, installation packages, residuals,
and memory cache. You can clear up the items.
1. Open Security.
Use Data usage to manage your data plan. It keeps track of data usage and
helps restrict mobile data, background data, or Wi-Fi usage of Apps.
Deep clean
Delete the redundant photo
Use Deep clean to detect duplicate photos and poor-quality images in your
Gallery. You can choose to delete redundant items.
Uninstall the unused app
Use Deep clean to delete the rarely used Apps to free up space.
Delete App data
Use Deep clean to see all videos that are saved on the phone. You can delete
the unnecessary ones and free up space.
105
Deep clean settings
• Tap to enable Remind to clean, and then to set trash size limit and
schedule.
Dual apps allows you to clone an existing app on your device and use it inde-
pendently with a different account. See Dual apps for more information.
Facebook cleaner
Game Turbo boosts the connection stability for games by limiting the band-
width of background downloads and reducing network delay. This feature clears
memory reserved for the background processes to give more space for the
game and prevents you from notification disturbances.
Open games with Game Turbo
106
• Tap to enable Game Turbo to improve gaming experience.
• Tap to enable In-game shortcuts. You can swipe from the top side
edge of the screen to view games.
107
• Tap Enhanced experience to choose to enable Turn off auto brightness,
Turn off Reading mode, Restrict screenshot gestures, or Don't open
Notification shade.
3. Tap GPU settings to choose GPU modes such as Default, Save power, Bal-
ance, High quality, or Custom.
Note
!
Custom enables you to customize Frame rate, Resolution, Anisotropic filtering, Tex-
ture filtering quality, Mipmap LOD bias, and Multithreaded rendering.
108
3. Tap Additional settings to choose Touch-resistant area.
Set up Enhanced visuals
The feature helps increase contrast and enhance details for games.
4. Tap Restore.
5. Tap OK.
Manage floating window shortcuts
5. Tap Done.
Note
!
• You can press and hold the App icons to rearrange the positions.
Toolbox
Note
!
Some models have more powerful and diverse Sidebar features. And they may change the
name to Toolbox. You can check whether the features are available to your models.
You can use Sidebar when you enter a game for quick settings.
109
Boost performance
4. Choose a voice type from Original, Girl, Woman, Cartoon, Robot, or Man.
Note
!
You can press and hold to speak in 0 to 10 seconds, then release to listen to a
voice demo.
Set timers
You can set up four timers to time your sessions.
Note
!
110
3. Tap an App icon to open the App in floating window.
Note
!
If you want to learn how to move floating windows, view floating windows in fullscreen
mode, minimize floating windows, or minimize an App, see Learn floating windows for
more information.
Note
!
If you enabled App lock, you need to enter the password when you open the hidden
folder.
111
3. Manage Hide apps.
You can go to Security > Manage apps to update and uninstall Apps or
manage the permissions. See Manage apps, Dual apps, and Permissions for more
information.
Privacy
Use Privacy to manage Apps that request sensitive permissions, monitor how
Apps use sensitive permissions, and manage other privacy-related permissions.
See Privacy protection for more information.
Second space
You can go to Security > Second space to create a second space to sepa-
rate and secure your data.
To turn on Second space, see Turn on Second space for more information.
Security scan
Use Security scan to scan your phone for dangerous Apps and viruses. The
feature timely solves the issues related to Wi-Fi, payment environment, privacy,
and viruses.
Use Security scan
Use Security scan to scan the system and get suggestions on clearing trash and
checking the new features.
112
Solve problems
Use Solve problems to scan and solve performance, network, settings, bat-
tery, and other issues of the phone.
Note
!
If you find some problems, you can tap Submit to report issues or suggestions in Service &
feedback.
Test network
Find and solve network-related issues
Use Test network to run a network test when you encounter problems with
network. You can follow the onscreen instructions to resolve the current net-
work problems after you see the test results.
Close connected Apps
All Apps currently connected to the internet are shown in the test results. You
can tap an App to force to stop it.
Themes
Themes can give your phone a new look. Themes is the official personaliza-
tion platform of MIUI with thousands of high-quality themes. Besides the famili-
ar themes, wallpapers, ringtones, and fonts, you will be able to find lots of other
personalization options for your Lock screen and Home screen.
Tools
Calculator
You can use Calculator to perform basic arithmetic calculations with the
standard calculator. You can also use the scientific calculator for trigonometric
functions, angular radians, roots, and financial and currency measurement.
Use Calculator
1. Open Calculator.
113
• Tap to switch to the scientific calculator for trigonometric functions,
angular radians, and roots.
114
• Tap to use the Mortgage calculator to help you plan finances with ad-
justable repayment methods and interest rates.
1. Open Calculator.
• Touch and hold the calculation result in the display, then tap Copy. You
can now paste the result elsewhere.
• Tap to delete the last digit if you make a mistake when you enter a
number.
115
1. Open Clock.
5. Tap .
1. Open Clock.
3. Select to turn off the alarm once or turn off the repeating alarm.
Add custom clock
You can add clocks in different countries and regions to compare the time.
1. Open Clock.
2. Tap .
3. Tap .
116
5. Tap the location to add a custom clock to the start page.
Use stopwatch
You can use the stopwatch to measure the duration of an activity such as a
match or an event.
1. Open Clock.
2. Tap .
3. Tap to start.
Note
!
You can tap to mark different time segments, tap to continue, or tap to reset
the stopwatch.
Set a timer
You can use the timer to count down from a specified time. You can set times
with duration from one second to 99 hours 59 minutes and 59 seconds.
1. Open Clock.
2. Tap .
Note
!
The timer stops automatically when the timing ends. You can also tap to pause the
Tip
You can tap to add an ambient noise. You can also choose to silence the alarm at
the end of an ambient noise timer.
Compass
You can use Compass to show your direction, location, and elevation.
117
Use compass
1. Open Compass.
N
2. Place your phone on a horizontal or vertical surface to see the compass face.
Tip
You can see the real-time view provided by your camera when you hold the phone ver-
tically.
Use a level
You can use the level to measure whether a surface is horizontal or vertical.
1. Open Compass.
N
2. Swipe left from the start page to use your phone as a level.
3. Place your device on a horizontal or vertical surface to see the level face.
Note
!
When the color of the circles turns green, it shows the phone is horizontal or vertical to
the surface.
Downloads
You can use Downloads to manage your downloaded Apps and other files.
Add a new download job
1. Open Downloads.
118
3. Enter an HTTP or HTTPS link in the box.
4. Tap Download.
Tip
You can swipe left from the start page to view the completed download jobs.
1. Open Downloads.
Mi Remote is a universal remote control App that works with your phone's IR
Blaster (Infrared Blaster) port. Mi Remote supports Samsung, LG, Sony, Pana-
sonic, Sharp, Haier, Videocon, Micromax, Onida, and other brands. You can con-
trol the available appliances including TVs, set-top boxes, DVD players, smart
boxes, air conditioners, projectors, cameras, and other devices in your home.
Recorder
You can use Recorder to record an event, a meeting, personal notes, or class-
room lectures, creative ideas, and more.
Record audio
1. Open Recorder.
2. Tap to start.
Tip
• The recording name is generated by default. You can edit the name to a new one.
• You can tap to mark specific segments, tap to pause the recording, and tap
to continue the recording.
119
View recordings
1. Open Recorder.
1. Open Recorder.
• Tap to enable Earpiece mode to play audio using the earpiece speak-
er.
• Tap Recently deleted items to manage deleted items. Deleted items can
be stored in the trash for up to 30 days.
• Tap Clear data to delete cached items, app data, and customized set-
tings.
Scanner
You can open Scanner and place the QR code inside the frame to scan differ-
ent types of QR codes and bar codes.
120
! Caution
You do not use Scanner to take photos of the objects that contain your personal informa-
tion.
Tip
You can turn on the flash in the dark environment.
• Tap Suggestions and share how you would like to improve MIUI.
6. Tap Send.
Note
!
You can choose to add an image or video, enter your phone number or email, or add
logs when you submit a feedback.
ShareMe
You can use ShareMe to back up or transfer files between Android devices or
between your mobile devices. See Transfer files with the ShareMe App for more
information.
121
Weather
You can use Weather to check the weather in your current location and other
locations. You can view the upcoming hourly and 5-day forecast and see the air
pollution and other information.
View weather info
You can open Weather to view the current and the 5-day forecast weather
information of your location. You can also check the 24-hour forecast, wind
speed and direction, real feel, UV index, and pressure on the start page.
Add a city to your weather list
You can add and view the weather information of different cities in your weath-
er list.
1. Open Weather.
1. Open Weather.
4. Tap Delete.
Share weather info
1. Open Weather.
3. Tap Share.
122
1. Open Weather.
Xiaomi Community
Xiaomi Community is an official forum for Xiaomi users. It helps and provides
the latest news about Xiaomi Products and MIUI updates. You can chat with
Xiaomi fans in Xiaomi Community.
View the latest news
You can view the latest the news and comments about Xiaomi and MIUI from
the official accounts or users in the community.
3. Tap the news that you are interested in to see more details.
Tip
You can also make comments below the news.
Make a post
You can post anything that you want to say and share your ideas with other
users of the same interest in the community.
4. Tap Submit.
123
Tip
You can also select a forum, add a topic, add photos, videos, and other media files to
your post. Other users with the same interest may find your post easily.
Join a forum
You can join the forum that you are interested in and view the latest news and
information of the forum.
4. Choose the forum that you want to join in, then tap Join beside the forum.
• Tap Pattern to draw a simple pattern with your finger to lock the phone.
See Set a pattern lock for more information.
• Tap PIN to enter 4 to 16 numbers to lock the phone. See Set up a PIN
lock for more information.
2. Tap Pattern.
124
Note
!
2. Tap PIN.
3. Enter 4 to 16 digits.
Note
!
2. Tap Password.
Note
!
4. Tap Done.
Tip
Make sure both your finger and the screen are clean.
Note
!
The place of fingerprint sensor may vary in different models. The fingerprint sensors
may locate on the sides of the phone or in the bottom of the screen.
125
Set up a face lock
You need to set up Screen lock first before you set up Face unlock. You can see
Set up Screen lock for more information.
4. Tap Done.
Unlock with Bluetooth device
You can unlock the phone with bluetooth devices such as some wearable devi-
ces made by Xiaomi.
You need to set screen lock before you set up Unlock with Bluetooth device.
You can see Set up Screen lock for more information.
1. Go to Settings > Password & security > Unlock with Bluetooth de-
vice.
3. Tap to enable Use Find My Device. Use Find My Device is usually ena-
bled by default.
126
4. Tap Find My Device or Find My Device web to find the phone.
Note
!
Find My Device does not work until you add a Google account.
Security status
You can go to Settings > Security status to view the information about
Find device, Security update, and Google Play Protect.
Note
!
Google Play Protect regularly checks your Apps and phone for harmful behavior. You are
notified of any security risks found.
Note
!
You can also go to Settings > Safety & emergency > OPEN EMERGENCY INFOR-
MATION to add medical information.
127
3. Choose a contact.
Tip
Emergency SOS
Use Emergency SOS
After you enable the feature, you can press the Power button 5 times or more
rapidly to play a loud sound when Emergency SOS is starting.
2. Tap to enable Use Emergency SOS . Use Emergency SOS is usually ena-
bled by default.
Play countdown alarm
After you enable the feature, the phone plays a loud sound when Emergency
SOS is starting.
4. Tap Save.
Note
!
If you enter a non-emergency number, your phone must be unlocked to use Emergency
SOS and your call may not be answered.
2. Tap to enable Send ELS Location . Send ELS Location is usually enabled
by default.
128
Wireless emergency alerts
Enable wireless emergency alerts
You can receive alerts that threat your life and property, bulletins about child
abduction, and test information from the safety alert system.
• Tap to enable Severe threats. The feature alerts severe threats to life
and property.
• Tap to enable Test alerts. The feature allows to receive carrier tests
and monthly tests from the safety alert system.
Note
!
Privacy
View Privacy dashboard
You can view the time line of when Apps used a permission in the past 24 hours.
129
Note
!
Manage permissions
130
1. Go to Settings > Privacy > Ads.
3. Tap CONFIRM.
Note
!
You can also tap Delete advertising ID to see ads that are not based on your interests.
2. Tap Usage & diagnostics to view information about Usage & diagnostics.
You can go to Settings > Privacy protection to manage Apps that request
sensitive permissions, monitor how Apps use sensitive permissions, and manage
other privacy-related permissions.
Manage all permissions
You can manage Apps that request sensitive permissions. See Manage permis-
sions for more information.
Special permissions
You can monitor how Apps use sensitive permissions:
• All files access: Allow an App to read, modify, and delete all files on the de-
vice or any connected storage volumes.
• Device admin apps: Allow the admin App to erase all data, change the screen
lock, lock the screen, or disable some screen lock features.
• Display over other apps: Allow an App to display on the top of other Apps
you are using.
• Media management apps: Allow an App to modify or delete media files cre-
ated with other Apps without asking you.
131
• Picture-in-picture: Allow an App to create a picture-in-picture window while
the App is open or after you leave it. For example, to continue watching a vid-
eo.
• Install unknown apps: Allow an App to install unknown Apps. But the feature
may make your phone more vulnerable to attack by unknown Apps.
• Alarms & reminders: Allow an App to set alarms and schedule time-sensitive
actions. The feature lets the App run in the background, which may use more
battery.
• Usage access: Allow an App to track what other Apps and how often you are
using, and your carrier, language settings, and other detailed information.
• Wi-Fi control: Allow an App to turn Wi-Fi on or off, scan and connect to Wi-
Fi networks, add or remove networks, or start a local-only hotspot.
Other permissions
You can manage other privacy-related permissions. See Manage other permis-
sions for more information.
Apps
You can go to Settings > Apps to manage Apps and their permissions, set
Dual apps, and set App lock.
Manage system Apps
You can manage the services and settings of a system App. The system Apps in-
clude Music , Recorder , Call settings , Camera , Gallery , Security , System
apps updater , and Xiaomi Cloud.
2. Tap Uninstall.
132
4. Tap Uninstall at the bottom of the phone.
Set default Apps
Set default Apps for basic usages such as dial, messages, and camera.
For example, you can tap Browser to select Chrome or Mi Browser as a default
App to browse web pages.
Reset App preferences
Resets all preferences for disabled Apps, disabled App notifications, default
Apps, and background data restrictions for Apps.
Note
!
133
2. Tap Create.
Note
!
A dual App locates next to an App name. Whenever the system requires an action from
an App that has a dual App, you are asked which App is used.
Permissions
Enable the autostart
The feature enables Apps to start automatically when you turn on the phone.
Some Apps may incorrectly indicate that MIUI has prevented them from start-
ing. You can check permissions that have been granted to individual Apps.
2. Tap Autostart.
Note
!
You can also tap the App to choose to enable Allow apps to start automatically and
Allow the app to be started by other apps.
Manage permissions
134
Install via USB
The feature allows an App to be installed on your device via USB
Note
!
Tip
You can tap the search field at the top of the screen to search for Apps.
4. Tap OK.
135
Set the application time of App lock
You can set when to apply App lock. You need to verify your App lock password
when you open a protected App in the applied time.
You can see You have a new message instead of the actual content when you
receive a notification.
Unlock all Apps at once
Enter password once to unlock all protected Apps.
136
Change password type
You can change the App lock password type and the password at a regular time
for security.
3. Tap Change password type to change the App lock password type and the
password itself.
Unlock with fingerprint
You can add a fingerprint unlock for App lock.
4. Add your fingerprint. See Set up a fingerprint lock for more information.
Face unlock
You can add a face unlock for App lock.
Location
Location may use sources like GPS, Wi-Fi, mobile networks, and sensors to help
estimate the location of your device.
137
Enable Location access
Allow Apps that have the location permission to get your location information.
Tip
You can also swipe down from the upper-right corner of the phone to enable Loca-
tion on the Control center.
Note
!
On some models, you tap App access to location to change the App location permis-
sions.
• Tap Google Location History to view the location history in Google Apps.
• Tap Wi-Fi scanning to allow Apps and services to scan for Wi-Fi networks
at anytime, even when Wi-Fi is off.
• Tap Bluetooth scanning to allow Apps and services to scan for nearby de-
vices at anytime, even when Bluetooth is off.
138
Note
!
On some models, you can tap Share location info with carrier to all the carriers to
learn about your location via base station.
Chapter 12 Accessibility
The accessibility features help people with difficulties in vision, physical, hearing,
and other needs.
General
Enable Accessibility menu shortcut
Accessibility menu provides convenient shortcuts that allow you to control the
phone.
• Drag the slider left or right to adjust Transparency when not in use.
Enable Shortcut from lock screen
Allow features shortcut to turn on from the Lock screen. Hold both volume keys
for a few seconds.
139
Vision
Use TalkBack
TalkBack provides spoken feedback so that you can use the phone without look-
ing at the screen. TalkBack is intended for situations or people who have diffi-
culty in seeing the screen.
3. Tap TalkBack.
5. Tap Allow and follow the onscreen instructions or listen to the talkback to
perform actions.
Note
!
You can now tap the phone screen to listen to the words or items aloud.
Enable TalkBack shortcut
3. Tap TalkBack.
Note
!
You can now press and hold both the volume buttons simultaneously to turn on or turn
off TalkBack.
Set up Talkback
140
You can set up the Text-to-speech settings, Verbosity, Sound and vibration,
and customize Focus Indicator, gestures, menus, and other items.
Enable Select to Speak shortcut
When Select to Speak is on, you can tap specific items on your screen to hear
the words read aloud.
141
Manage display
• Tap Color inversion to turn light screens dark or turn dark screens light.
Hearing
Enable Mono audio
The feature combines channels when playing audio.
• Tap Caption size and style to adjust text size and caption style.
142
Note
!
Physical
Enable Switch Access
Switch Access lets you interact with your Android device with one or more
switches instead of the touch screen. Switch Access can be useful if you cannot
interact directly with your phone. Use switches to select items, scroll, type, and
more.
• Tap Touch & hold delay to select a time for a continuous touch to be re-
sponded as a touch and hold.
143
• Tap to enable Auto-rotate screen.
• Tap Autoclick (dwell timing) to select a time for a mouse cursor to click
automatically when the cursor stops moving for a certain amount of time.
Enable Sidebar
You can open a second App when you swipe the Sidebar.
144
Open an App in Sidebar
Tip
You can also add an App to the Sidebar.
• Tap to enable Front camera assistant to show Beautify and fill light
options while you use the front camera.
• Drag the slider left or right to adjust the front fill light brightness.
145
Opening floating windows
Press and hold, and then pull down the action bar of a
notification.
Minimize an app *
Press and hold the bottom of the window, and drag it to
the upper right corner.
Note
!
3. Tap Continue.
146
4. Choose the way to switch between spaces.
Note
!
• The passwords for the two spaces must be different. If you are on the primary
space, you can enter the password for the second space on the Lock screen to enter
the second space.
• You can tap Skip if you choose Using a shortcut to switch between spaces without
a password.
After you enable Second space, the Switch App appears on the Home screen of
your phone. You can tap to switch to the primary space.
Note
!
When the phone cannot be used normally, you can press and hold the Power button
for 15 seconds to force the device to restart.
147
Reboot the phone
1. Press and hold the Power button until the function menu shows.
2. Choose Reboot.
1. Go to Settings .
Note
!
The system informs you of the latest MIUI version update information. You can also en-
ter the update page from the notification and choose whether to update or not.
2. Check the update information of Apps and update the system Apps.
• Tap Auto updates to choose Don't update, Updates using Wi-Fi, or Up-
dates using Wi-Fi and mobile data.
148
Note
!
The feature needs to connect to the internet and requires some permissions to work
normally.
Factory reset
You can remove all data from your phone and reset your phone to factory set-
tings.
Note
!
You need to back up all important items such as accounts, contacts, photos and videos,
Apps, backups, SD card data, and other items.
You can go to Settings > About phone to view the information such as
MIUI version information, important safety information, the certification infor-
mation, and other information.
Memory extension
You can go to Settings > Additional settings > Memory extension to add
more RAM by occupying storage.
Note
!
Use this feature only when there is enough storage space available on your device.
Mi Account
Xiaomi Account is an authentication method used for Xiaomi devices. It works
with MIUI, Xiaomi Cloud, Xiaomi Community, and other services. You can go to
Settings > Mi Account to sign in with your Mi Account.
Google
You can go to Settings > Google to sign in with your Google Account and
set the preference services such as ads, autofill, and devices and sharing on the
phone.
149
Accounts & sync
You can sync the calendar, contacts, drive, mail, and other information of Goo-
gle and other accounts.
Enable Auto-sync data
Any changes you make to your accounts on the web will be automatically cop-
ied to your device.
3. Tap OK.
Note
!
You can also tap Sync now at the bottom of the phone to sync data manually.
Note
!
You need to enable Auto-sync data before you enable Wi-Fi only.
Disclaimer
This generic user guide is published by Xiaomi or its local affiliated company. Im-
provements and changes to this user guide necessitated by typographical er-
rors, inaccuracies of current information, or improvements to programs and/or
equipment, may be made by Xiaomi at any time and without notice. Such
changes will, however, be incorporated into new online editions of the user
guide (please see details at www.mi.com/global/service/userguide).
Because this generic user guide describes the comprehensive features on Xiao-
mi and Redmi phone models, the phone appearance, features, functions,
150
operating procedures, and configuration parameters may not be available to
your actual phone models. The illustrations, including but not limited to the col-
or, size, images, and icons, may be slightly inconsistent with your actual device.
All illustrations in this manual are for reference only.
151