Scribd
Upload
112 views7 pages

7112.a Data Sheets

This technical specification provides details on two plate heat exchangers for use in rum filtration and reheating processes. The first unit exchanges heat between rum and rum to increase the temperature from -4°C to 18°C. The second unit uses warmer water to further increase rum temperature from 0°C to 30°C. Both units are plate and frame heat exchangers with 43 and 58 plates, respectively, made of AISI 316L steel with EPDM gaskets. They are designed to efficiently transfer heat between liquid streams while meeting standards for food-grade applications.

Uploaded by

Alexis Prado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views7 pages

7112.a Data Sheets

This technical specification provides details on two plate heat exchangers for use in rum filtration and reheating processes. The first unit exchanges heat between rum and rum to increase the temperature from -4°C to 18°C. The second unit uses warmer water to further increase rum temperature from 0°C to 30°C. Both units are plate and frame heat exchangers with 43 and 58 plates, respectively, made of AISI 316L steel with EPDM gaskets. They are designed to efficiently transfer heat between liquid streams while meeting standards for food-grade applications.

Uploaded by

Alexis Prado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Technical Specification

Plate Heat Exchanger SIGMA M 18 NBL


Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration - regeneration
Quote No. | Item : 7112.A | Pos.: 1

Technical Calculation Cold side Warm side


Section: exchanger Rum Rum
Flow rate 6,000.0 l/h 6,000.0 l/h
Mass flow 5,666.1 kg/h 5,615.0 kg/h
Heat load kW 136.73
Temperature in out °C -4.0  18.0 30.0  8.2
Media type liquid gaseous liquid gaseous
Density t/m³ 0.944 0.936
Specific Heat kJ/kgK 3.945 4.021
Thermal conductivity W/mK 0.356 0.361
Dynamic viscosity cP 5.208 3.030
Latent heat kJ/kg 0.000 0.000
Surface m² 7.5
K-Value W/m²K 1,515.6
Excess surface | Fouling % | cm²K/W 5.90 | 0.3680
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 43 | 0.50 / 0.50
Pressure loss bar | bar 0.290 0.230
Hold-up volume (water) l 13.568 13.568
No. of passes | Plate arrangement countercurrent 3 | 3 x 7 SH 3 | 3 x 7 SW
Frame design Carbon steel - primer and coating in color RAL 7001
Rules | Fluid group | Category 2014/68/EU / AD2000 | 2 | Art. 4 Paragraph 3
Intermediate Plate | Intermediate Frame No. 0 | 0
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 14.30
Design temperature min | max -10.0 °C | 95.0 °C
Maximum fitting no. of plates 83
Cold side Connections Warm side
Pos. Type | Size | Material Pos. Type | Size | Material
In H Clamp connection ISO DN-50 - 60,3x2 AISI In C Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti
Out B Clamp connection ISO DN-50 - 60,3x2 AISI Out E Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti

Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)

Dimensions (mm)
length (L) : 860.00
width (B) : 340.00
height (H) : 1,026.00
measure (n) : 165.00
measure (o) : 150.50
measure (p) : 900.50

Net weight (kg) 208

The thermal resistance of the platepack materials is up to max. 95.0 °C .

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18 NBL
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration - reheating
Quote No. | Item : 7112.A | Pos.: 2

Technical Calculation Cold side Warm side


Section: exchanger Rum Warm water
Flow rate 6,000.0 l/h 12,000.0 l/h
Mass flow 5,632.3 kg/h 11,962.0 kg/h
Heat load kW 187.46
Temperature in out °C 0.0  30.0 32.0  18.5
Media type liquid gaseous liquid gaseous
Density t/m³ 0.939 0.997
Specific Heat kJ/kgK 3.995 4.183
Thermal conductivity W/mK 0.359 0.607
Dynamic viscosity cP 3.640 0.889
Latent heat kJ/kg 0.000 0.000
Surface m² 10.2
K-Value W/m²K 2,479.1
Excess surface | Fouling % | cm²K/W 5.10 | 0.1960
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 58 | 0.50 / 0.50
Pressure loss bar | bar 0.300 0.760
Hold-up volume (water) l 17.824 18.432
No. of passes | Plate arrangement countercurrent 4 | 4 x 7 SW 4 | 1 x 8 SH + 3 x 7 SH
Frame design Carbon steel - primer and coating in color RAL 7001
Rules | Fluid group | Category 2014/68/EU / AD2000 | 2 | Art. 4 Paragraph 3
Intermediate Plate | Intermediate Frame No. 0 | 0
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 14.30
Design temperature min | max -10.0 °C | 95.0 °C
Maximum fitting no. of plates 83
Cold side Connections Warm side
Pos. Type | Size | Material Pos. Type | Size | Material
In H Clamp connection ISO DN-50 - 60,3x2 AISI In D Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti
Out A Clamp connection ISO DN-50 - 60,3x2 AISI Out E Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti

Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)

Dimensions (mm)
length (L) : 860.00
width (B) : 340.00
height (H) : 1,026.00
measure (n) : 165.00
measure (o) : 150.50
measure (p) : 900.50

Net weight (kg) 226

The thermal resistance of the platepack materials is up to max. 95.0 °C .

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration – reheating with regen
Quote No. | Item : 7112.A | Pos.: 2a

Technical Calculation Cold side Warm side


Section: exchanger Rum Warm water
Flow rate 6,000.0 l/h 12,000.0 l/h
Mass flow 5,672.0 kg/h 11,950.3 kg/h
Heat load kW 82.73
Temperature in out °C 17.0  30.0 32.0  26.0
Media type liquid gaseous liquid gaseous
Density t/m³ 0.945 0.996
Specific Heat kJ/kgK 4.039 4.183
Thermal conductivity W/mK 0.362 0.614
Dynamic viscosity cP 2.606 0.816
Latent heat kJ/kg 0.000 0.000
Surface m² 10.2
K-Value W/m²K 1,738.7
Excess surface | Fouling % | cm²K/W 50.50 | 1.9300
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 58 | 0.50 / 0.50
Pressure loss bar | bar 0.280 0.750
No. of passes | Plate arrangement countercurrent 4 | 4 x 7 SW 4 | 1 x 8 SH + 3 x 7 SH
Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)

Dimensions ()
length (L) :
width (B) :
height (H) :
measure (n) :
measure (o) :
measure (p) :

Net weight (kg) 71

The thermal resistance of the platepack materials is up to max. 95.0 °C .

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18 NBL
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration - cooling
Quote No. | Item : 7112.A | Pos.: 3

Technical Calculation Cold side Warm side


Section: cooler propylene glycol 30% Rum
Flow rate 32,500.0 l/h 6,000.0 l/h
Mass flow 33,757.7 kg/h 5,635.5 kg/h
Heat load kW 196.77
Temperature in out °C -6.7  -1.2 30.0  -1.5
Media type liquid gaseous liquid gaseous
Density t/m³ 1.039 0.939
Specific Heat kJ/kgK 3.785 3.990
Thermal conductivity W/mK 0.417 0.359
Dynamic viscosity cP 8.621 3.765
Latent heat kJ/kg 0.000 0.000
Surface m² 7.6
K-Value W/m²K 1,775.3
Excess surface | Fouling % | cm²K/W 4.90 | 0.2630
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 44 | 0.50 / 0.50
Pressure loss bar | bar 0.380 0.250
Hold-up volume (water) l 14.176 13.568
No. of passes | Plate arrangement countercurrent 1 | 1 x 22 SH 3 | 3 x 7 SW
Frame design Carbon steel - primer and coating in color RAL 7001
Rules | Fluid group | Category 2014/68/EU / AD2000 | 2 | Art. 4 Paragraph 3
Intermediate Plate | Intermediate Frame No. 0 | 0
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 14.30
Design temperature min | max -10.0 °C | 95.0 °C
Maximum fitting no. of plates 83
Cold side Connections Warm side
Pos. Type | Size | Material Pos. Type | Size | Material
In B Clamp connection ISO DN-50 - 60,3x2 AISI In E Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti
Out A Clamp connection ISO DN-50 - 60,3x2 AISI Out C Clamp connection ISO DN-50 - 60,3x2 AISI
316Ti 316Ti

Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)


The linked image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. V erify that the link points to the correct file and location.

Dimensions (mm)
length (L) : 860.00
width (B) : 340.00
height (H) : 1,026.00
measure (n) : 165.00
measure (o) : 150.50
measure (p) : 900.50

Net weight (kg) 209

The thermal resistance of the platepack materials is up to max. 95.0 °C .

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration – cooling with regen
Quote No. | Item : 7112.A | Pos.: 3a

Technical Calculation Cold side Warm side


Section: cooler propylene glycol 30% Rum
Flow rate 32,500.0 l/h 6,000.0 l/h
Mass flow 33,775.3 kg/h 5,686.9 kg/h
Heat load kW 75.42
Temperature in out °C -6.7  -4.6 8.2  -4.0
Media type liquid gaseous liquid gaseous
Density t/m³ 1.039 0.948
Specific Heat kJ/kgK 3.780 3.913
Thermal conductivity W/mK 0.415 0.354
Dynamic viscosity cP 9.404 6.490
Latent heat kJ/kg 0.000 0.000
Surface m² 7.6
K-Value W/m²K 1,521.9
Excess surface | Fouling % | cm²K/W 9.50 | 0.5700
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 44 | 0.50 / 0.50
Pressure loss bar | bar 0.390 0.310
No. of passes | Plate arrangement countercurrent 1 | 1 x 22 SH 3 | 3 x 7 SW
Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)


Fehler! Es wurde kein Dateiname angegeben.
Dimensions ()
length (L) :
width (B) :
height (H) :
measure (n) :
measure (o) :
measure (p) :

Net weight (kg) 54

The thermal resistance of the platepack materials is up to max. 95.0 °C .

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18 TBL
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration - 3 stage design
Quote No. | Item : 7112.A | Pos.: 4

Technical Calculation Cold side Warm side


Section: heating Rum Warm water
Flow rate 6,000.0 l/h 12,000.0 l/h
Mass flow 5,632.3 kg/h 11,962.0 kg/h
Heat load kW 187.46
Temperature in out °C 0.0  30.0 32.0  18.5
Media type liquid gaseous liquid gaseous
Density t/m³ 0.939 0.997
Specific Heat kJ/kgK 3.995 4.183
Thermal conductivity W/mK 0.359 0.607
Dynamic viscosity cP 3.640 0.889
Latent heat kJ/kg 0.000 0.000
Surface m² 10.2
K-Value W/m²K 2,479.1
Excess surface | Fouling % | cm²K/W 5.10 | 0.1960
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 58 | 0.50 / 0.50
Pressure loss bar | bar 0.300 0.760
Hold-up volume (water) l 18.124 18.732
No. of passes | Plate arrangement countercurrent 4 | 4 x 7 SW 4 | 1 x 8 SH + 3 x 7 SH

Technical Calculation Cold side Warm side


Section: exchanger Rum Rum
Flow rate 6,000.0 l/h 6,000.0 l/h
Mass flow 5,666.1 kg/h 5,615.0 kg/h
Heat load kW 136.73
Temperature in out °C -4.0  18.0 30.0  8.2
Media type liquid gaseous liquid gaseous
Density t/m³ 0.944 0.936
Specific Heat kJ/kgK 3.945 4.021
Thermal conductivity W/mK 0.356 0.361
Dynamic viscosity cP 5.208 3.030
Latent heat kJ/kg 0.000 0.000
Surface m² 7.5
K-Value W/m²K 1,515.6
Excess surface | Fouling % | cm²K/W 5.90 | 0.3680
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 43 | 0.50 / 0.50
Pressure loss bar | bar 0.290 0.230
Hold-up volume (water) l 14.168 14.168
No. of passes | Plate arrangement countercurrent 3 | 3 x 7 SH 3 | 3 x 7 SW

Following section: cooling

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023


Technical Specification
Plate Heat Exchanger SIGMA M 18 TBL
Customer : Metalinox Group
Your inquiry | Item : Rum PHE’s | cold filtration - 3 stage design
Quote No. | Item : 7112.A | Pos.: 4

Technical Calculation Cold side Warm side


Section: cooling propylene glycol 30% Rum
Flow rate 32,500.0 l/h 6,000.0 l/h
Mass flow 33,757.7 kg/h 5,635.5 kg/h
Heat load kW 196.77
Temperature in out °C -6.7  -1.2 30.0  -1.5
Media type liquid gaseous liquid gaseous
Density t/m³ 1.039 0.939
Specific Heat kJ/kgK 3.785 3.990
Thermal conductivity W/mK 0.417 0.359
Dynamic viscosity cP 8.621 3.765
Latent heat kJ/kg 0.000 0.000
Surface m² 7.6
K-Value W/m²K 1,775.3
Excess surface | Fouling % | cm²K/W 4.90 | 0.2630
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 12.50 0.00 | 10.00 | 12.50
Gasket material EPDM EPDM
Plate material | Fixing AISI 316L | mechanically fixed
No. of plates | Sheet thickness No. | mm 44 | 0.50 / 0.50
Pressure loss bar | bar 0.380 0.250
Hold-up volume (water) l 14.176 13.868
No. of passes | Plate arrangement countercurrent 1 | 1 x 22 SH 3 | 3 x 7 SW
Frame design Carbon steel - primer and coating in color RAL 7001
Rules | Fluid group | Category 2014/68/EU / AD2000 | 2 | Art. 4 Paragraph 3
Intermediate Plate | Intermediate Frame No. 0 | 2
Oper. pressure (min|max) | Test pressure bar 0.00 | 10.00 | 14.30
Design temperature min | max -10.0 °C | 95.0 °C
Maximum fitting no. of plates 148
Connections
Position No. Type | Size | Material
Frame head 2 Clamp connection ISO DN-50 - 60,3x2 AISI 316Ti

Movable Cover 3 Clamp connection ISO DN-50 - 60,3x2 AISI 316Ti


Intermediate Frame 7 i.f.-insert clamp connection straight DIN DN-50 - 53x1.5 AISI 36Ti
1 blind insert R 2" AISI 316TI
Accessories No. Description

Sketch (Subject to technical changes upon placing the order !)

Dimensions (mm)
length (L) : 1,695.00
width (B) : 340.00
height (H) : 1,150.00
measure (n) : 165.00
measure (o) : 275.00
measure (p) : 1,025.00

Net weight (kg) 489

The thermal resistance of the platepack materials is up to max. 95.0 °C .


The process calculation in particular the pressure loss calculation presumes equal operating pressures on both sides
of the unit.

ANG_EN 3.0 – PG3.6.28-M0-DB 2.1015 24-APR-2023

You might also like