Specification Data CF 30004 E

2/93

31000 Series
Eccentric Rotary Control Valves
with PFA Liner
Table of Contents
Foreword........................................................................................... 2
Numbering System............................................................................ 3
General Data..................................................................................... 3
Connections ...................................................................................... 4
Pressure/Temperature rating ............................................................ 4
Leakage Class................................................................................... 4
Cv and FL versus Travel................................................................... 4
Construction...................................................................................... 5
Materials of Construction................................................................... 5
Allowable Differential Pressures ....................................................... 6
Dimensions and Masses.................................................................. 7

Foreword
The 31000 Series control valve is a PFA lined control valve for corrosive applications which incorporates into its
design the following features :

- Eccentric rotary plug which results in tight shut off - Dovetail grooves for mechanical anchoring between
and low dynamic forces. metal body and PFA lining to ensure high
performance under vacuum and at high temperature.
- PFA lining with guaranteed minimum wall thickness
which provides resistance to most corrosive fluids. - Powerful, field proven rolling diaphragm actuator
guaranteeing positive fail-safe action
- Straight through flow pattern resulting in larger flow
capacities. - Totally enclosed actuator linkage

- PTFE packing, chevron rings, backed-up by double - Combination handwheel/adjustable limit stop with
O-ring follower. locking mechanism

- Compact dimensions and low weight without - Complete line of options and accessories
compromise to piping forces.

Particulars contained in this publication are for general information only and Masoneilan reserves the right to modify the contents without prior notice.
No warranty either expressed or implied is either given or intended.

2
Numbering System

1 st 2nd 1st 2nd 3th 4th 5 th

3 1 0

Actuator Mounting
Actuator Type Body Series Seat Material Non assigned
(type 35 only)

20 Manual Actuator 31 1.Parallel to pipe line, 1. PTFE 0

air-to-close
34 Roto-Pact type 2. Special
pneumatic Actuator

35 Spring-opposed
rolling-diaphragm

70 Double acting cylinder

2.Parallel to pipe line,
90 ElectricalActuator air-to-open

Note: Actuator position ➀ and ➁ correspond to standard configuration.

Other positions are available : consult Masoneilan

General Data
• Body and Bonnet • Flow direction : flow to close

Type : cast, one piece, top entry, self flushing

optional : with steam / hot water jacket
(SJ) • Actuator✩
Material : nodular ductile iron, heat treated Type : spring opposed rolling diaphragm (model 35)
Lining : PFA, translucent, melt processed Yoke : cast iron
optional : antistatic material optional : auxiliary handwheel / limit-stop
Connections : flanged manual actuator (20)
Bonnet connection : through-bolted Roto-Pact type pneumatic piston (34)*
Outside protection : epoxy coating double acting cylinder (70)*
electrical actuator (90)*

• Trim
Plug type : eccentrically rotating
Plug materials : PFA coated stainless steel • Accessories✩
Seat ring type : conical, sealed with O-ring 4600 series cam pneumatic positioner
Seat ring material : solid virgin PTFE 8013 series cam electro-pneumatic positioner
optional : other materials (consult 8007/8008 series electro-pneumatic transducers
Masoneilan) 496 series switch (one or two contacts)
optional : PFE O-ring 496-8 series opto-electronic position transmitter
Capacity : full capacity and reduced factor (0.4) in 77-4/77-40 series airsets
all sizes 77-6 series lock-up valve
Flow characteristic : modified linear solenoid valves, booster relay, etc. (consult
Cv ratio : 80 /1 Masoneilan)
Packing : virgin PTFE, chevron type rings backed-
up by double O-ring follower
optional : leak detector or flushing
connection

* Interface according to ISO 5211 standard

✩ Refer to specific actuator and accessory specification literature for complete information

3
Construction

19

13

12

18 9

17 11

10
14
8
16
7
16
6

15 2

1
Note : leak detector or flushing connection is optional

Materials of construction

Ref. n° Description Standard materials (optional materials)

1 Body Ductile iron GGG40.3/PFA lined

2 Bonnet Ductile iron GGG40.3/PFA lined
3 Plug PFA coated stainless steel
Virgin solid PTFE
4 Seat ring
Other materials (consult Masoneilan)
FEP coated Viton ®
5 O-ring
Perfluoroelastomer (PFE)
6 Packing Virgin PTFE - chevron ring system
7 Packing box ring Stainless steel
8 Disc springs (set) Spring steel
9 Packing follower Stainless steel
10-11 O-rings Viton®
12 Actuator connecting flange Stainless steel
13 Wiper ring Neoprene
14-19 Bolting Stainless steel

5
Argentina ❒ ∆ Australia ■ ● ∆ Bahrain ❒ Belgium ■ ∆ Bolivia ❒ Brazil ■ ● ∆ Canada ■ ● ∆ Chile ❒ Colombia ❒
Egypt ❒ Finland ❒ ∆ France ■ ● ∆ Germany ■ ● ∆ Great Britain ■ ● ∆ Italy ■ ● ∆ Ivory Coast ❒ Iraq ❑ Japan ■ ● ∆
Jordan ❒ Korea ❒ Kuwait ❒ ∆ Kenya ❒ Mauritius ❒ Mexico ■ ● ∆ Morocco ❒ Netherlands ■ ∆ New Zealand ❒ ∆
Ireland ❒ Philippines ❒
Denmark ❒ ∆ Greece ❒
Iran ❒

Nigeria ❒
C.I.S. ❒
India ❒ Taiwan ❒

Norway ❒ ∆ Oman ❒ Pakistan ❒ Peru ❒ Portugal ❒ ∆ Qatar ❒ Saudi Arabia ■ ∆ Spain ■ ● ∆ Singapore ■ ● ∆
Sweden ❒ ∆ Switzerland ❒ ∆ Turkey ❒ ∆ Trinidad ❒ Tunisia ❒ United Arab Emirates ❒ U.S.A. ■ ● ∆ Venezuela ■ ∆

Legend : ■ Sales Offices

❒ Representatives
● Manufacturing Facilities
∆ Stocking Centres
List of addresses on request

Division of Dresser Produits Industriels

107, av. Ch. de Gaulle - 92521 Neuilly-sur-Seine Cedex - Tel. (33-1) 47 15 81 81 - Fax (33-1) 46 24 77 68 - Telex 620046 F
Works : 3, rue Saint-Pierre - 14110 Condé-sur-Noireau - Tel. (33) 31 69 59 00 - Fax (33) 31 69 38 44 - Telex 170728 F FRANCE