Scribd
Upload
84 views2 pages

Fire Alarm Surge Protection Guide Rev 21

This document summarizes various surge protection products from DITEK that are designed to protect fire alarm and life safety systems. It describes surge protection modules and combo units that protect 120V AC power as well as signaling circuits from surges. Features like audible alarms, dry contacts for monitoring, and NEMA 4X enclosures are highlighted for different models. Replacement modules, bases that accommodate multiple modules, and complete solutions for protecting an entire fire alarm system are outlined.

Uploaded by

Nafis Tyagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views2 pages

Fire Alarm Surge Protection Guide Rev 21

This document summarizes various surge protection products from DITEK that are designed to protect fire alarm and life safety systems. It describes surge protection modules and combo units that protect 120V AC power as well as signaling circuits from surges. Features like audible alarms, dry contacts for monitoring, and NEMA 4X enclosures are highlighted for different models. Replacement modules, bases that accommodate multiple modules, and complete solutions for protecting an entire fire alarm system are outlined.

Uploaded by

Nafis Tyagi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fire Alarm Surge Protection

External
Antenna
Kit

Cellular
Communicator
DTK-VSPN or DTK-VSPSMA

DTK-2MHLP-BWB
(shorts to ground)
DTK-2MHLP-FWB Phone
(opens circuit) Lines

DTK-2MHLP-WB or DTK-MRJ31XSCPWP
(hardwired) (modular, one per line)

DTK-2MHLP-BWB
DTK-2MHLP-FWB

Electrical
Service
DTK-DF120S1 or DTK-120HWLOK
DTK-2MHLP-BWB (series connection) (parallel connection)

Fire alarm and life safety systems are essential for protecting people, property and assets in virtually every school, hotel,
hospital, office complex and public facility across the country. Facilities cannot afford to be without surge protection
to protect these mission critical systems from damaging power surges and spikes. These surges can enter from power
supply lines, signaling line circuits, initiating device circuits, outdoor antenna connections, and notification device
circuits – in fact, any electrical path has the potential to find its way into the FACP. Surge protection is an extremely
cost-effective first line of defense against common power issues, and increases overall safety while reducing liabilities.

DTK-DF120S1 Features & Specs DTK-2MHLP Series Features & Specs


• 120V / 20A series-wired SPD • 2-pair, modular loop circuit surge protectors
• Rapid-replacement module • 20kA surge current rating, 5-130V configurations
• Audible alarm & status indicators • B series shorts to ground
• Dry contacts for remote monitoring • F series removes load and opens circuit
• UL 1449 listed
• UL 1283 EMI/RFI filtering

DTK-120HW Features & Specs DTK-MRJ31XSCPWP Features & Specs


• 120V parallel-wired SPD • Single pair dialer protector with RJ31X connection
• 50,000A max surge current rating • For 2-pair, screw terminal connection use DTK-2MHTP
• Compact design with NEMA 4X enclosure • Automatic reset handles multiple surges
• DTK-120HWLOK includes lockout kit

11
Total Surge Solutions

120VAC power surge Audible alarm can be


protection with audible alarm silenced via included time
and Form C dry contacts for delay switch (24 hours)
remote monitoring

6-position mounting base Low voltage module cover


for 2MHLP/MHTP modules to ships blank to allow for
protect up to (12) SLC, NAC, application of installation
IDC, PIV, network or dialer company logo sticker
circuit pairs

DTK-120X12

Visual, audible, smart. DITEK’s DTK-120X12 sets a new standard for 120VAC power and low voltage surge protection. It
will protect your system power and up to twelve (12) pairs of SLC, IDC/PIV, NAC, network or dialer circuits. This combo
unit comes equipped with a DTK-DF120M, 120VAC, replaceable surge protection module and a 6-position mounting
base for replaceable, low voltage surge modules. Adding DTK-2MHLP/2MHTP modules (modules must be ordered
separately) for data/signal and dialer circuit protection provides a complete solution for your fire alarm system.

DTK-TSS1 Features & Specs DTK-TSS3 Features & Specs


• 120V alarm panel protection with 5-positon base • 2-position base for SLC loop protection modules
• Low voltage module sold separately to protect up to • Protects up to (4) pairs of building-to-building cable runs
(10) pairs of SLC, NAC, IDC or NAC circuits • NEMA 4X enclosure for harsh environments
• Dry contacts for remote monitoring

DTK-TSS2 / TSS2NM Features & Specs DTK-TSS4D Features & Specs


• DTK-TSS2: Protects 120V system power & up to (4) • Protects 120V system power
pairs of loop circuits - NEMA 4X enclosure • Dry contacts for remote monitoring
• DTK-TSS2NM: Protects 120V system power with space
• NEMA 4X enclosure for harsh environments
for monitor module - NEMA 4X enclosure

12

You might also like