Nano Bts Adc

FlexWave nanoBTS EDGE/AMR
GSM-over-IP picocell for in-building coverage and capacity
The new FlexWave nanoBTS EDGE/AMR picocellular base station represents a significant step on the migration path to higher data rates and more supported users. Based on the FlexWave nanoBTS GSM/GPRS base station it delivers the same features and functionality for GSM voice and GPRS but with the addition of high-speed EDGE data and improved voice quality and capacity using AMR coding. For operators moving to higher speed data networks by deploying EDGE, there is a strong requirement to provide high quality coverage in buildings. With industry-leading GSM-over-IP technology it is possible to bring cost effective high-speed coverage to the user where they most need and use it.
Features:
Up to 3 times the data rate with EDGE support
Applications
Dedicated coverage for SME premises In-building capacity and coverage for large corporate offices Hybrid indoor/outdoor applications when deployed with FlexWave microBTS Campus, stadiums, subways, tunnels Delivering GSM access on ships, airplanes and rural areas
Spec Sheet
Up to 3 times the number of supported users with half rate AMR Support for EDGE coding MCS1-MCS9 Indoor coverage up to 125,000m2 (1.4 million ft2) Single Ethernet connection for Abis over IP to BSC Smallest footprint in the industry
www.adc.com
+1-952-938-8080
1-800-366-389 1
GSM-over-IP picocell for in-building coverage and capacity Increased Data Capacity
For many of the new data services the majority of use will be indoors where the EDGE BTS will be physically close to the user. The quality of the signal can be correspondingly higher, so the higher rate data coding schemes will be available to the user. The FlexWave nanoBTS EDGE/AMR supports all the EDGE coding schemes from MCS1- MCS9 giving a maximum nominal data rate of 414kpbs which is up to three times the maximum data rate of the GSM/GPRS model. The BTS also monitors for the optimum RF conditions for data transfer and alters the data throughput to achieve the fastest rates This ensures the best possible user experience and maximizes the use of the available spectrum.
FlexWave nanoBTS
104624AE 4/07
Improved Voice Quality and Capacity

In networks where AMR capable handsets are being deployed the new coding scheme can be used to improve the quality of voice calls, improving the user experience. In addition, as the quality of the AMR half rate coding is very similar to the standard full rate GSM, half rate AMR can be used to double the number of voice channels available per BTS. Erlang models show that this increases the number of supported users by up to three times, improving the return on investment for the BTS.
Easy Deployment
Picocells offer a lower cost alternative to the traditional antenna based approach to providing GSM coverage and capacity within buildings. Due to the small size and deployment flexibility, the FlexWave nanoBTS can easily achieve coverage where needed. The quick and simple installation using existing Ethernet wiring for both data and power avoids the need for the expensive site surveys, cabling installations and access to roof and floor spaces typical of distributed antenna systems (DAS). The unique Network Listen function supplements the conventional RF planning process, allowing the planners to see into the difficult indoor environment to optimize the coverage. For operators with existing FlexWave nanoBTS deployments the EDGE unit can be combined with an existing GSM/GPRS installation using the multi TRX capability. All the units then operate as a single cell together with the high data rates of 414kbps of the highest EDGE coding schemes.
Scalable System Architecture

The FlexWave nanoBTS is a complete GSM base station that conforms to the picocell standard and delivers GSM-over-IP. It combines a standard Um air interface, which supports the more than 2 billion GSM handsets in use globally, with an IP based backhaul, which can take advantage of the existing IP broadband infrastructure. There are two versions of the FlexWave nanoBTS EDGE/AMR for operation in the 1800 and 1900MHz GSM frequency bands. For applications requiring even greater capacity up to 4 FlexWave nanoBTS can be combined into a multiple TRX cell, increasing the number of simultaneous calls up to 62 using half rate AMR. The FlexWave nanoBTS GPRS/GSM and the FlexWave nanoBTS EDGE/AMR are controlled by the FlexWave Base Station Controller (BSC). System configuration, performance and fault reporting is handled by the FlexWave OMC-R Management System.
www.adc.com
+1-952-938-8080
1-800-366-3891
GSM-over-IP picocell for in-building coverage and capacity Specifications

Um RADIO INTERFACE Transmit Frequencies GSM 1800 Model GSM 1900 Model Channel Spacing Max. Output Power: GMSK (CS 1-4/MCS 1-4) 8PSK (MCS 5-9) Static Power Control Dynamic Power Control Receive Frequencies GSM 1800 GSM 1900 Channel Spacing Performance Gain Control Steps Antennas 1805 to 1880MHz 1930 to 1990MHz 200kHz +23dBm +13dBm 6 steps (2dB each) 6 steps (2dB each) 1710 to 1785MHz 1850 to 1910MHz 200kHz GSM 05:05 26 Integral antennas for TX, RX and NetworkListen 0dBi omni-directional (nominal) Connectors for external antennas Each nanoBTS supports a single TRX and can act as a standalone BTS Up to 4 nanoBTS can also be connected to act as a Multi-TRX BTS TS0 = full BCCH, Combined BCCH or Combined BCCH with CBCH TS1-7 = TCH, PDCH or Dynamic PDCH/TCH Additionally TS1 may be SDCCH/8 + SACCH/C8 (with optional CBCH) TS0-7 = TCH Additionally TS1 may be SDCCH/8 + SACCH/C8 Better than 100ppb as per GSM 05.10 pico Telephony Short Message Service MT/PP Short Message Service MO/PP Short Message Service CB single message for user cell description GSM FR and EFR AMR (full and half-rate, all codecs) Air Interface A5/1, A5/2 Abis over IP interface Signalling and management TLS / AES Voice - secure RTP / AES Single slot BS20 at up to 14.4kb/s BS21-26, plus BS61, BS81 GPRS Coding schemes CS1-4 E-GPRS Modulation and coding schemes MCS1-9 Multi-slot class 10 Dynamic PDCH for optimising mix of service for voice/data Link adaptation E-GPRS incremental redundancy and dynamic window size Single RJ45 auto-negotiate 10/100 Ethernet supporting PoE Timing Interface Bus (TIB) providing nanoBTS interconnect for multi-TRX functionality
FlexWave nanoBTS
104624AE 4/07
Channel Support Single TRX or C0 of MultiTRX
Multi TRX (non C0) Internal Clock Frequency USER SERVICES Teleservices
Speech Format Support Security
Circuit Switched Data GPRS and EDGE Support
Interface Connection
www.adc.com
+1-952-938-8080
1-800-366-3891
PHYSICAL SPECIFICATIONS Dimensions Weight Power consumption Input supply Power over Ethernet (PoE) Operational Temperature Operational Humidity Standards Mounting
205mm x 275mm x 63mm (8.1" x 10.8" x 2.5") 2kg (4.4 lbs) 13W 38 - 50 volt DC -5C to +45C ambient 5% - 90% non-condensing CE marked UL and FCC listed The FlexWave nanoBTS EDGE/AMR is provided with a mounting bracket. For multi TRX a second BTS can be mounted on top of the first Power-over-Ethernet can be provided locally using the supplied Ethernet inserter or remotely using a PoE switch
Spec Sheet
The trademarks used are owned by ADC or their respective owners.
Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a listing of ADCs global sales office locations, please refer to our Web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 104624AE 4/07 Original 2007 ADC Telecommunications, Inc. All Rights Reserved

Nano Bts Adc

Uploaded by

Copyright:

Available Formats

Nano Bts Adc

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nano Bts Adc

Uploaded by

Copyright:

Available Formats

FlexWave nanoBTS EDGE/AMR

GSM-over-IP picocell for in-building coverage and capacity

FlexWave nanoBTS EDGE/AMR

Improved Voice Quality and Capacity

Scalable System Architecture

GSM-over-IP picocell for in-building coverage and capacity Specifications

FlexWave nanoBTS EDGE/AMR

Channel Support Single TRX or C0 of MultiTRX

Speech Format Support Security

Circuit Switched Data GPRS and EDGE Support

The trademarks used are owned by ADC or their respective owners.

Web Site: www.adc.com

You might also like