Storage required

User / Installation manual

FULL-2WAY
LCD Appellation Touch Switch
WRT 9261-8

This manual is targeted to the following user.

● The engineers installing this product and setting the system
●Microsoft, Office, and Excel are either registered trademarks or trademarks of Microsoft Corporation ● The operators and managers of this product and the system

in the United States, Japan and/or other countries.

Thank you for purchasing our products.
●Microsoft product screen shots reprinted with permission from Microsoft Corporation.
To the installer This unit must be used with the knowledge of FULL-2WAY Remote Lighting
Control System.
Please read the technical manual or the catalog of FULL-2WAY Remote Lighting
Control System.

1048,Kadoma,Osaka 571-8686,Japan ● Please read this manual carefully, and use this product correctly and safely.
● Please read ” Safety Precautions ” before using.
ⓒ Panasonic Electric Works Co., Ltd. 2010
● After installation and setting, please give this manual to the operator or manager.
8A3 971 0000 1 DC 0110−0 PEW
Table of Contents
Brightness setting You can adjust the brightness of the screen light. …………………………… 24
Safety Precautions / Usage Notes ……………………………………………………… 4
Character position setting You can select the position of characters for switch name. ………… 25
Wiring Diagram and Cautions for Installations ……………………………… 5
Installation

Setting Link control

Names and Functions ………………………………………………………………… 6 Setting Screen locking You can make the switch not to operate from the external switches. ……… 26
Mounting …………………………………………………………………………………… 7 Display setting You can set each page displayed or undisplayed from the external switches. ……… 27
Auto-off setting You can set the auto-off. ………………………………………………… 28
Functions and Features ………………………………………………………………… 8 - 9 Setting State indication You can display states of loads in the switch by characters.……………… 29

Type of Settings…………………………………………………………………………… 10 - 11
Read / Write setting data with SD Memory Card
Settings ……………………………………………………………………………………………… 12 You can write the setting data to SD Memor y Card.

Address Setting For each switch, Individual（0-1 - 63-4）, Group（1-127）, Pattern（1-72）, You can read the setting data from SD Memor y Card.
Dimmer（1-16）can be set. Shut down the system before inserting or removing SD Memory Card ………………… 30
（Individual Switch）Individual …………………………………………………………… 13 How to insert or remove SD Memory Card ……………………………………………… 31
（Pattern / Group Switch）Pattern ……………………………………………………… 14 How to write the setting data to SD Memory Card ……………………………………… 32
（Pattern / Group Switch）Group ………………………………………………………… 15 How to read the setting data from SD Memory Card …………………………………… 33
（Dimmer Switch）Dimmer（Individual）…………………………………………………… 16 File format of reading and writing …………………………………………………… 34
（Dimmer Switch）Dimmer（Group）……………………………………………………… 17 How to edit the setting data written to SD Memory Card ……………………………… 35
（Dimmer Switch）Dimmer ……………………………………………………………… 17 The setting data that can be read and written（Factory default settings） ………… 36 - 37
Setting Switch Name You can set the name of each switch. ………………………………… 18 System
Setting Dialog box Dialog box is displayed when operating in the normal screen.
Setting Page Name You can set the name of each page. …………………………………… 19 The operational error can be prevented. ……………………………… 38
Setting Switch Type How to change the password You can arbitrarily change the password. …………………… 39

How to merge switches You can make the big size switch. ……………………………… 20 Maintenance
How to divide a switch You can return the merged switch to default switches. …………… 21 Initialization You can initialize the settings.(Factory default settings) …………………………… 40
Setting switch color You can set the switch color "Yellow","Blue",and "Default Color". ……… 21 Screen adjustment You can adjust the touching point when it is not pointing properly. …………… 40

Setting Sound and Screen CLEAN mode / Cleaning Instructions

CLEAN mode When you clean the screen, you can lock the screen temporarily. ………………… 41
Beep setting You can set OFF / ON of Beep. ……………………………………………… 22
Cleaning Instructions …………………………………………………………………… 41
Screen setting You can specify the page displayed when returning to the normal
screen from various states. ……………………………………………… 23 Troubleshooting ………………………………………………………………………………… 42
Coloration setting You can select in three colors, "White","Silver Gray", and "Dark Brown". ……… 24
Ratings and Specifications ………………………………………………………………… 43

2 3
 Safety Precautions Wiring Diagram and Cautions for Installations
Power
WARNING source
WRT4124-8 etc.
（6A Contact Output T/U）
Load

●All screws should be tightened firmly. FULL-2WAY signal line L

Power
Loose screws may cause damage or fire. source
WRT2050 series etc.
Mandatory ［Recommended tightening torque: 0.5 N · m - 1.0 N · m］ （Transmission Unit）

24 V AC line
Power
source 24 V
●Do not attempt to take apart, repair or modify this product AC line
under any circumstances. WR2301-811 etc.
Remote Control
Prohibited
Transformer: Not for U.S.A

CAUTION ■ Not for U.S.A (WR2301-811 etc. in use)

WRT9261-8 WRT9261-8

■ For U.S.A
WRT5554-8 etc.
（Switches）

24 V AC line Maximum wiring length 24 V AC line Maximum wiring length

●Do not install outdoors or in moistured areas. φ1.2 mm - φ1.6 mm、1.25 mm2 - 2.0 mm2 100 m φ1.2 mm - φ1.6 mm、1.25 mm2 - 2.0 mm2 100 m

This may cause smoking, fire or malfunctions. φ0.9 mm、0.75 mm 2

50 m φ0.9 mm、0.75 mm 2
50 m
※ Maximum of 7 LCD Appellation Touch Switches can ※ Maximum of 5 LCD Appellation Touch Switches can
Prohibited ●Do not touch the terminals while power is on. be connected per 1 Remote Control Transformer. be connected per 1 transformer.
※ When maximum wiring length of 500m is necessary, ※ Please use the transformer rated at 24 V, and more
This may cause electrical shock. 1 LCD Appellation Touch Switch can be connected than 36 VA.
※ When maximum wiring length of 500m is necessary,
per 1 Remote Control Transformer.
2 2 1 LCD Appellation Touch Switch can be connected
(φ1.2 mm - φ1.6 mm,1.25 mm - 2.0 mm in use)
per 1 transformer.
2 2
(φ1.2 mm - φ1.6 mm,1.25 mm - 2.0 mm in use)

Usage Notes Cautions for Installation

●Please operate this device by finger. ●Please do not connect power supply wires to the signal terminals.
Please do not operate this device with sharp or hard objects. This may cause malfunctions.
This may cause malfunctions. ●Please do not connect with different wire gauges to any terminals.
This may not work properly due to poor connections.
●Please do not press two or more switches at the same time. ●Please do not over tighten screws.
This may cause malfunctions. This may cause deformation or damage of unit.［Recommended tightening torque 0.4 N · m］
●Please do not connect while the system power is on.
●Read / Write setting data requires an SD Memory Card [optional].
Maximum SD Memory Card size : 4GB This may cause malfunctions.
●The use of power tools and power drivers may damage the connector block.
This may cause malfunctions.
●When LCD Touch Panel Block is removed from Power Block for a long time,
please re-attach the dust cover to Power Block.
Dust damages this product and cause malfunctions.

4 5
Names and Functions Mounting

Separated Blocks In the packaging,"Power Block" and

"LCD Touch Panel Block" are separated.
[mm]

Power Block LCD Touch Panel Block Box Screws

97＋50

90＋50

Setting Button Opening of

Mounting Box

Power Block
The connector in the Power Block has a
"Dust cover" installed. LCD Touch Panel Block
When installing the LCD Touch Panel
Block, please remove.
Plate
（WTC9222-8 etc.）
[Optional]

Back Side
（Power Block） （LCD Touch Panel Block）

Signal terminals
●Connect FULL-2WAY
signal

24 V AC terminals
●Connect 24 V AC
power supply

SD Memory Card Slot

●The setting data can be
backed up and edited with
SD Memory Card [Optional].
6 7
 Functions and Features
Address setting: Up to 24 Individual , Group and Pattern switches can be set in total.
Up to 6 Dimmer switches can be set in total. The main screen switch operation (Easy setting)
The names of each switch can be displayed. When you want to control ON/OFF only, "Easy setting" is recommended.

Up to 3 I n iti a l sc re e n
tabs can be used. ●Please set the switch address.
You can operate switches Sales
Meeting
by touching the screen.

1F
Room 1 Division 1
Status (Green)
Meeting Sales ●When "Individual","Group" is
Room 2 Division 2
off or "Pattern" does not match.

2F
Legal Reference
Position Indicator (Green) Division Room
●Even when the screen
Accounting All lights

3F
has been turned off in OFF
Division Status (Red)
the dark, the switch can
●When "Individual","Group" is
be located.
on or "Pattern" is matching.
※Blinks while in timer mode. Addressing setting Easy setting
●The switch shape appears when the
Setting Button switch address is set.
●It shifts to "SETTING mode" and "CLEAN mode".
●Maximum of eight switches can be
You can select the color of the screen. set per page.
The coloration can be set to "White" , "Silver Gray" or "Dark Brown".
(Brightness can be adjusted.)

You can display the various size switches on the screen.(Detailed setting)
●You can make a dimmer swich with standard switches.
●Various size switches are available.

Detailed Dimmer switches Tab

setting Page name / Switch name setting Easy setting
●You can set Dimmer switches that is
operated easily and see the dimmer level.
1F

●When the switch name has been input, Meeting Sales

1F
Sales Room 1 Division 1
the name is displayed on the switch.
ON

Division
Switch size
●When the page name is input, Meeting Sales
●You can set various size switches. Room 2 Division 2
2F

the name is displayed on the tab.

2F
Reference
OFF

Room Legal Reference

Division Room
Meeting All lights State indication
Pattern

3F
ON

OFF Accounting All lights

3F
Room
●You can display the state of loads with Division OFF
characters.

8 9
 Type of Settings
Please select " Easy setting" or "Detailed setting".
" Easy setting" is included in "Detailed setting".
Please select, according to situations.

Easy setting Detailed setting

Easy setting Back End Detailed setting Back End
End
Page name

Only Address, Switch name Page 1 Page 2 Page 3

Please select the button.
Address Switch Type Page name You can set all contents.
and Page name can be set. Switch name
Sound
Switch name System
（P.13 - P.19） Page 1 Page 2 Page 3 Easy Detailed Screen
setting setting
Address
Page 1 Page 2 Page 3

Address Switch name Page name Switch Type Sound System

Set the switch name. Set the switch design. Screen Read / Write setting data with
Set the address of the switch. Set the page name. SD Memory Card [Optional],
（P.20 - P.21） Set the sound and screen.
（P.13 - P.17） （P.18） （P.19） （P.22 - P.29） Maintenance.（P.30 - P.40）

How to insert or remove

Setting Setting How to
Individual Beep Setting SD Memory Card
Switch name Page name merge switches
※Address No.0-1 - 63-4
can be set. How to write the
Screen Setting
Pattern How to setting data
※Address No.1 - 72 divide the switch
can be set. How to read
Group Coloration Setting the setting data
※Address No.1 - 127
Setting
can be set. Switch Color File format of reading
Brightness Setting and writing
Dimmer（Individual）
※Address No.0-1 - 63-4 How to edit the
can be set. Setting setting data written
Character position
Dimmer（Group） Setting data can be
※Address No.1 - 127 Setting read and written
can be set.
Link control
Setting Dialog box
Dimmer Setting
※Address No.1 - 16
Screen locking How to change
can be set.
Display Setting the password

Auto-off Setting Maintenance

Setting Initialization
State indication Screen adjustment
10 11
 Settings（Steps to "SETTING mode"） Address Setting / Individual Switch
Easy setting
Detailed setting

You can set variously in "SETTING mode".When you begin setting or change the settings,
please change the screen to "SETTING mode". Steps to the Address Setting / Individual Switch
Address
Steps to "SETTING mode" Easy setting Select Page
Setting SETTING Enter Password
Button mode
Back Back OK Detailed
Address Select Page
Please enter the password.
setting
2
Meeting Sales
1F

Room 1 Division 1 ＊＊＊＊ Clear

Please select the button.
Meeting Sales
Division 2 SETTING 1 2 3 4 5
Address No.0-1 ~
- 63-4
63-4 can
can be
be set.
set.
Room 2 CLEAN mode
mode
2F

Legal Reference
Division Room
6 7 8 9 0
1
Accounting All lights
Individual
3F

Division OFF

Setting Button ① Enter your password (4 digits).

Press "SETTING mode". ② Press "OK". Example: Set " Individual 0-1" to " Switch 1 ".
※ Initial password is "0123". Address Back End Address : Esc OK ① Press "Ind".
To change to your password,
please read P.39. Switch 1 Switch 5
Timer ② Press Load Channel "0".
Press "Setting Button". Address Unset Address Unset Ind. 0-1 Clear - Set ③ Press "-".
5
Switch 2
Address Unset
Switch 6
Address Unset Ind. Dim. 1 2 3 4
④ Press Load Number "1".
※ If you change the function,
Switch 3 Switch 7
P G 5 46 7 8 the address that has already
Address Unset Address Unset 1 been entered is cleared.
End

SETTINGS
Switch 4 Switch 8 ※ If you want to change the
Address Unset Address Unset 9 0 −
address that has already
Please select the button. Press the switch you want to set. 2 3 been entered, press "Clear"
and enter address.

（ ）
Easy Detailed Please read
setting setting
Type of Settings : P.10 - P.11 When you set the timer ... When you do not set the timer ...
How to Settings : P.13 - P.40
5 Press "OK".
※Settings are saved.

Address： Esc OK Switch Timer Esc Sel. Address： Esc OK

Returning to the normal screen Ind. 0-1 Clear

Timer
- Set
Without Timer
Ind. 0-1 Clear
Clear
ON-Timer
5min Set

Ind. Dim. 1 2 3 4
OFF-Delay
30sec 1min 5min
2 Ind. Dim. 1 2 3 4
1
Easy setting Back End

Page name ON-Timer

Page 1 Page 2 Page 3
P G 5 6 7 8 30sec 1min 5min P G 5 6 7 8
Switch name
Page 1 Page 2 Page 3 Meeting Sales 9 0 − 1hr 2hr 9 0 −
1
1F

Room 1 Division 1
Address
Page 1 Page 2 Page 3 Meeting
Room 2
Sales
Division 2
Press "OK".
Quit setting and
Press "Set". 1 Select the timer.
2F

return to the normal mode?

Detailed setting Back End Legal Reference

Address Switch Type Page name Yes No

Division

Accounting
Room

All lights
2 Press "Sel.".
3F

Division OFF ※Settings will not be saved

Switch name Sound Screen System
at this time.
The timer you selected
is displayed.

Press "End" . Press "Yes" . Returned to the normal screen. Please exit by pressing "End", and follow the instructions on the screen.
※ In "SETTING mode" the screen is returned to the normal screen without any operation in 10 minutes.
In this case, only settings you pressed "Yes" can be saved.
The programmed switch will be displayed.
12 13
 ※Please set Pattern / Group Control data with Wireless
Address Setting / Pattern / Group Switch
Easy setting
Programming Unit（WRT9600-8[Optional]）etc. Detailed setting

Steps to the Address Setting / Pattern / Group Switch Address No. 1-127 can be set.
Address
Easy setting
Setting SETTING
Select Page
Group
Enter Password
Button mode
Detailed
Address Select Page Example: Set "Group 1" to "Switch 7".
setting

Address Back End Address： Esc OK ① Press "G".

Switch 1 Switch 5
Timer ② Press "1".
Address No.1-
No.P1-72P72
cancan
be be
set.set. Ind.0-1 Ind.1-1 G 1 Clear - Set 3
Switch 2 Switch 6 ※ If you change the function,
Ind.0-2 Ind.1-2 Ind. Dim. 1 2 3 4 the address that has already
been entered is cleared.
Pattern
Switch 3 Switch 7
P G 5 6 7 8
Ind.0-3 Address Unset
2 ※ If you want to change the
Switch 4 Switch 8 address that has already
Ind.0-4 P1 19 0
been entered, press
"Clear" and enter address.
Example: Set "Pattern 1" to "Switch 8". Press the switch you want to set.

When you set the timer ... When you do not set the timer ...
Address Back End Address： Esc OK 3 Press "OK".
Switch 1 Switch 5 ※Settings are saved.
Ind.0-1 Ind.1-1 P 1 Clear 3
Switch 2 Switch 6 Address： Esc OK Switch Timer Esc Sel.
Ind.0-2 Ind.1-2 Ind. Dim. 1 2 3 4
Timer
Without Timer
Switch 3 Switch 7
P G 5 G 1 Clear - Set 2
Ind.0-3 Address Unset 26 7 8
OFF-Delay
Switch 4 Switch 8 Ind. Dim. 1 2 3 4 30sec 1min 5min
9 0
Ind.0-4 Address Unset 1 ON-Timer
P G 5 6 7 8 30sec 1min 5min
Press the switch you want to set. ① Press "P".
9 0 1hr 2hr 1
② Press "1".
③ Press "OK". Press "Set". 1 Select the timer.
※ If you change the function, 2 Press "Sel.".
the address that has already
been entered is cleared. Address： Esc OK ※Settings will not be saved
※ If you want to change the address Timer at this time.
that has already been G 1 Clear
ON-Timer
Set
5min
entered, press "Clear" and
enter address. The timer you selected Ind. Dim. 1 2 3 4 Press "OK".
is displayed.
P G 5 6 7 8

9 0
Please exit by pressing "End", and follow the instructions on the screen.
The programmed switch will be displayed.

14 15
 Address Setting / Dimmer Switch ※After making the Dimmer Switch shape（refer to P.20）, Easy setting
please set the address. Detailed setting

Steps to the Address Setting / Dimmer Switch Address No.1-127 can be set.

Easy setting
Address
Select Page Dimmer（Group）
Setting SETTING Enter Password
Button mode
Detailed
Example: Set " Group 1" to the switch. For dimming : Esc OK

Address Select Page

setting G 1 Clear 3
The step is similar to that of
Ind. Dim. 1 2 3 4
P.16 except for setting "G",
Address No.0-1-63-4 can be set. G 5 6 7 8
in address setting. 2
9 0
Dimmer（Individual）
−
1
Example: Set " Individual 6-1" to the switch.
Address No. 1-16 can be set.
(For Dimming, For ON / OFF)
① Press "Ind".
Address Back

Switch 5
End For dimming : Esc OK
② Press Load Channel "6".
Dimmer
For Dimming
Ind. 1-1 Ind. 6−1 Clear
5 ③ Press "-".
Address Unset
Switch 6 Example: Set " Dimmer 16 " to the switch. For dimming : Esc OK

Ind. 1-2 Ind. Dim. 1 2 3 4 ④ Press Load Number "1".

For ON / OFF
⑤ Press "OK". Dim. 16 Clear 4
Address Unset Switch 7
G1 1 G 5 6 7 8 ※ If you change the function, The step is similar to that of
4 Ind. Dim. 1 2 3 4
Switch1
Switch 8
P1
9 0
2 −
the address that has already
been entered is cleared.
P.16 except for setting "Dim",
G 5 6 7 8
Press the switch you want
※ If you want to change the in address setting. 1 2
3 address that has already been 9 0 −
to set（For Dimming）. entered, press "Clear" and 3
enter address.

Address Back End For ON / OFF : Esc OK ① Press "Ind".

Switch 5
Timer ② Press Load Channel "6". For ON / OFF : Esc OK Switch Timer Esc Sel. For ON / OFF : Esc OK
For Dimming

Ind. 6-1
Ind. 1-1 Ind. 6−1 Clear - Set ③ Press "-". Ind. 6−1 Clear
Timer
-
なし Set
Without Timer
2 Ind. 6−1 Clear
Timer
OFF-Delay
30sec Set
Switch 6
Ind. 1-2 Ind. Dim. 1 2 3 4 ④ Press Load Number "1". Ind. Dim. 1 2 3 4
OFF-Delay
30sec 1min 5min Ind. Dim. 1 2 3 4
For ON / OFF
※ If you change the function, ON-Timer
Switch 7
Address Unset
G1 1 G 5 6 7 8 the address that has already G 5 6 7 8 30sec
1 1min 5min G 5 6 7 8

Switch 8
4 been entered is cleared. 9 0 − 1hr 2hr 9 0 −
9 0 − ※ If you want to change the
Switch1 P1
2 address that has already been Press "Set". 1 Select the timer. Press "OK".
entered, press "Clear" and
Press the switch you want 3 enter address.
to set（For ON / OFF）. 2 Press "Sel.". The timer you
※Settings will not be saved selected is
at this time. displayed.
When you set the timer ...

When you do not set the timer ... Please exit by pressing "End", and follow the instructions on the screen.
5 Press "OK". The programmed switch will be displayed.
※ Settings are saved.

16 17
 Setting Switch Name Setting Page Name
Easy setting Easy setting
Detailed setting Detailed setting

Up to 20 characters can be displayed for each switch. For example, " EXIT ". Up to 10 characters can be displayed for tab of each page.
For example, " 1F "," 2F ", and " 3F " etc..
etc.

Steps to the Setting Switch Name Steps to the Setting Page Name
Switch Name Page Name
Easy setting Select Page Easy setting Select Page
Setting SETTING Setting SETTING
Enter Password Enter Password
Button mode Button mode Page
Detailed Switch Detailed
Select Page Select Page
setting name setting name

Tab
Name of Switch Back End Name of Switch Esc OK Name of Page Esc OK

Switch1 Switch5
（Unset） （Unset）
EXIT
2 1F
2
Switch2 Switch6
●Indication of
会議室1 営業部1

AB
（Unset） （Unset） ABC DEF GHI JKL Clr ABC DEF GHI JKL Clr
tab characters
Switch3 Switch7
（Unset） （Unset） MNO PQRS TUV WXYZ MNO PQRS TUV WXYZ
1 1 会議室2 営業部2
Switch4 Switch8
（Unset） （Unset） - . @ Char CR - . @ Char CR
総務部 資料室
Press the switch you want to set. ① Enter the name. ① Enter the name.
② Press "OK". ② Press "OK". 経理部 1F全消灯

How to input character

How to input character ※If you want to change characters that has already been entered,
please enter again after pressing "Clr.".

① DEF DEF →E Name of Switch Esc OK

Please exit by pressing "End", and follow the instructions on the screen.
EXIT
② WXYZ WXYZ →X
The programmed switch will be displayed.
③ GHI GHI GHI →I ABC DEF GHI JKL Clr

MNO PQRS TUV WXYZ

④ TUV →T
- . @ Char CR
How to change the input mode
Name of Switch Esc OK Name of Switch Name of Switch Esc OK

EXIT EXIT EXIT

×Close

ABC DEF GHI JKL Clr ABC DEF GHI JKL Clr

MNO PQRS TUV WXYZ AaBb Sign MNO PQRS TUV WXYZ

- . @ Char CR 1234 - . @ Char CR

Press "Char.". Select the input mode. It changes into the input mode
you selected.

18 19
Setting Switch Type Detailed setting

Steps to the Setting Switch Type You can make a large switch by merging two or more switches.
Setting SETTING Detailed You can make a Dimmer Switch by selecting "Dim." in Switch Type.
Enter Password Switch Type Select Page
Button mode setting

How to merge switches How to divide a switch

You can return the merged switch to default switches.
Example: Merge "Switch1" - "Switch4". The following are procedures for returning Dimmer Switch to
default switches.
Type of Switch Esc OK
Example: Divide a Dimmer Switch into "Switch1" - "Switch4".
Type of Switch Esc OK

Switch1 Switch5 Div Switch5 Div

The information of the left upper
1 Switch2 Switch6 Mer
switch becomes prior
Switch6 Mer
Type of Switch Esc OK Type of Switch Esc OK Type of Switch Esc OK
after switches merged.
Switch1
1 Switch3 Switch7 Dim.
Do they need to merge?
Switch7 Dim.
Switch5 Div Switch5 Div Switch1 Switch5 Div

2
1 Switch4 Switch8 Color
YES NO
Switch8 Color
Switch6 Mer
Switch1
Switch6 Mer
4
Switch2 Switch6 Mer

Switch7 No Dim Switch7 Dim. Switch3 Switch7 Dim.

1
① Select switches you Press "OK". Switch8 Color
want to merge. Press "Yes". 1
Switch1 Switch8 Color
2 3 Switch4 Switch8 Color

② Press "Mer". ① Select Dimmer Switch. ③ Select the switch you Press "OK".
※ It is impossible to merge switches to shape that is not a rectangle.
want to divide. ※Contents set to "Switch1"
Example
② Press "No Dim". are copied to "Switch2"-
④ Press "Div". "Switch4".
Type of Switch Esc OK Type of Switch Esc OK Type of Switch Esc OK Type of Switch Esc OK

Setting Switch Color

Switch1 Switch5 Div Div Switch1 Switch5 Div Div

Switch2 Switch6 Mer Mer Switch2 Switch6 Mer Switch8 Mer

Switch3 Switch7 Dim. Possible Switch7 Switch7 Dim. Switch3 Switch7 Dim. Impossible Switch7 Switch7 Dim.

Switch4 Switch8 Color to merge Switch8 Switch8 Color Switch4 Switch8 Color to merge Switch8 Switch8 Color

You can set the switch color.

You can select colors from "Yellow", "Blue", and "Default Color".
※ "Default" changes by coloration setting (P.24).
Make a Dimmer Switch.
Type of Switch Esc OK Type of Switch Esc OK

Type of Switch Esc OK Type of Switch Esc OK Switch1 Switch5 Div Switch1 Switch5 Div

Switch2 Switch6 Mer Switch2 Switch6 Mer

2
Switch1 Switch5 Div Switch5 Div
The information of the left upper
1 Switch2 Switch6 Mer
switch becomes prior
Switch6 Mer Switch3 Switch7 Dim. Switch3 Switch7 Dim.
after switches merged.
1 Switch3 Switch7 Dim.
Do they need to merge?
Switch7 No Dim Switch4 Switch8 Color Switch4 Switch8 Color

1 YES NO
Switch4 Switch8 Color
2 Switch1 Switch8 Color
Press the switch you want to ① "Yellow","Blue", and 1
1 change color. "Default Color" are displayed
① Select four switches in Press "OK". sequentially whenever you push
Press "Yes". ※ You can also set for two or more switches
the vertical direction.
at the same time. "Color" and please select the color
② Press "Dim". you want.
② Press "OK".

Please exit by pressing "End", and follow the instructions on the screen. The programmed switch will be displayed.

20 21
 Setting Sound and Screen Detailed setting

Steps to the Setting Sound and Screen

You can specify the page displayed in the normal screen
Setting SETTING Detailed Sound in following situations.
Enter Password
Button mode setting Screen
・After turning on Power
・After the screen has recovered from auto-off.
・When changing to the normal screen from "SETTING mode" or
"CLEAN mode"
You can set OFF/ON of Beep.

Screen setting
Beep setting
Start Screen Esc OK

Page 1 Page 2
When you selected
"Invalid" in Display
2
Sound and Screen Back End Beep Esc OK
setting (P.27)
Page 3
1
Former
Beep Screen Coloration 2 "Former screen" is the
screen

OFF
screen displayed before 1 Select the page you want.
Brightness Character Link
position control the screen light was turned
ON
off automatically. 2 Press "OK".
Auto-off State
Sound and Screen Back End
indication 1
Beep Screen Coloration
Press "Beep". ① Select"OFF" or "ON".
Character
② Press "OK". Brightness
position
Link control
After pressed
Auto-off State ① or ② .
Indication

Press "Screen".
Start Screen Esc OK

When you selected The address set on screen ON

3
Former
"Effective" in Display screen Chg

setting (P.27) The address set on screen OFF

Former
1
screen Chg

2
①② Press "Chg".
③ Press "OK".

Please exit by pressing "End", and follow the instructions on the screen.

22 23
 Setting Sound and Screen Detailed setting

Steps to the
Setting SETTING Detailed Sound
Setting Sound Enter Password
Button mode setting Screen
and Screen

You can match the switch and the surrounding installed by setting
the coloration of the screen background, and the brightness You can select the position of characters for switch name.
of the screen.

Coloration setting Set character position

You can select in three colors,"White","Silver Gray", and "Dark Brown".

Sound and Screen Back End Coloration Esc OK

Sound and Screen Back End Character position Esc OK

Beep Screen Coloration White 2 2

Beep Screen Coloration Left ○○○

Brightness Character Link Silver 1 Character Link 1

position control Gray Brightness Center ○○○
position control

Auto-off State Dark

indication Auto-off State
Brown indication Right ○○○

Press "Coloration". ① Select the color you want to set.

Press "Character position". ① Select a character position
② Press "OK". you want to set.
② Press "OK".
Brightness setting
You can adjust the brightness of the screen light. Default is set as maximum.

Sound and Screen Back End Brightness Esc OK

Dark Bright

Beep Screen Coloration

2

Brightness Character Link 1

position control

Auto-off State
indication

Press "Brightness". ① Press "Dark" or "Bright" arrows

according to your preference.
② Press "OK".

Please exit by pressing "End", and follow the instructions on the screen.

24 25
 Setting Sound and Screen Detailed setting

Steps to the Setting Sound Link

Setting Sound
SETTING
Enter Password
Detailed Operational error can be prevented by locking the screen,and the
Button mode setting Screen control
and Screen page displayed on the switch can be changed according to the layout.

Setting Link control

You can control Screen locking and Display settings with the external switches by setting the addresses.
※ The same addresses for Relay control T/U and 6A Contact Output T/U can not be set.
※ The same addresses for Screen locking and Display setting can not be set.
Display setting
Setting Screen locking Linkage control Back End Screen Esc OK 4
ON ctrl
Linkage control Back End Screen locking Esc OK ① Press "Effective". Screen
locking
Effective
setting
ON control Esc Sel.

4 ② Press "Chg", and input the The operation of switches will be Ind. 63−4 Chg OFF ctrl 2
Screen
locking
Effective Page 1
address. invalidated. 1 setting Page1 Display Non-display

Ind. 63−3 Chg Page 2 Display

The operation of switches will be
invalidated. 1 3 ③ Select pages you want to 2 3 Page 2 Display Non-display
Shows pages locked
set. Selection of the pages is displayed. Invalid
Display when the assress
2
Page 3
1
is ON.
④ Press "OK". Page 3 Display Non-display
Selection of the pages is displayed.
Invalid
Press "Display".
① Press "Effective".
② Press "Chg", and input
Press "Screen locking".
the address. OFF control Esc Sel.

The example of Screen locking ③ Set "ON ctrl "and" OFF 2

ctrl". Page 1 Display Non-display

Sales
④ Press "OK".
Meeting Page 2 Display Non-display
1F

Room 1 Division 1
The example of Display setting 1
63-3 Meeting Sales
Room 2The screen isDivision
Page 3 Display Non-display
locked. 2
2F

Sales
LegalIt is impossible to operate.
Meeting

1F
Reference Room 1 Division 1

Division Close Room Meeting Sales "Page 2"

The external switch is ON. 63-4 Room 2 Division 2

can not
1 Select "Display" or "Non-

2F
Accounting All lights Legal
3F

Reference

(When this switch is OFF, Division OFF

Division Room
display".
Accounting All lights be displayed.

3F
the screen is unlocked.) The external switch is ON. Division OFF
2 Press "Sel".

case 1

1F
Conference
room 1

If Screen locking addresses are included in "All OFF" Pattern control program, 63-4

2F
you can turn off all the lights and lock the screen at the same time when you Conference
room 2
press the "All OFF" Pattern switch.

3F
The external switch is OFF.
case 2
If Screen locking addresses are set to Program Timer Unit (WRT3540K-8 etc.), the case
screen can be locked at the time you want. When one big conference room is divided to two small canference
room, by installing this product next to each entrance and set
"Effective", it will avoid controlling the entire room.

Please exit by pressing "End", and follow the instructions on the screen.

26 27
 Setting Sound and Screen Detailed setting

Steps to the Setting Detailed Sound

SETTING
Setting Sound Enter Password
Button mode setting Screen
and Screen You can display the states of loads in the switches by characters.

Setting State indication

You can set the auto-off.
You can select the state indication of loads without characters or
with characters.

Sound and Screen Back End State indication Esc OK

Auto-off setting Beep Screen Coloration

Without
2
character
Brightness Character Link
position control
With 1
character
Auto-off State
indication
Sound and Screen Back End Auto-OFF Esc OK

Press "State indication". ① Select "Without character" or

Beep Screen Coloration
10sec 2 "With character".
② Press "OK".
Brightness Character
position
Link 30sec1
control

Auto-off State
indication 1min
Without character With character
① Select the auto-off time
Press "Auto-off". you want to set.
Meeting Meeting

OFF
② Press "OK". Individual or Group:OFF Room 1 Individual or Group:OFF Room 1

Meeting Meeting
Individual or Group:ON Individual or Group:ON

ON
Room 1 Room 1

Please exit by pressing "End", and follow the instructions on the screen. All lights All lights

Pattern
Pattern:Disagreement OFF Pattern:Disagreement OFF

All lights All lights

Pattern
Pattern:Agreement OFF Pattern:Agreement OFF

28 29
 ※ The setting data of one LCD Appellation Touch Switch
Read / Write setting data with SD Memory Card can be written in one SD Memory Card. Detailed setting

You can back up and edit setting data on your PC, by using SD Memory Card How to insert or remove SD Memory Card
[Optional].
To write and read the data safely, please follow the steps when inserting and SD Memory Card Slot is located on the side of the LCD Touch Panel Block.
removing SD Memory Card. After you remove LCD Touch Panel Block from Power Block,
please insert or remove SD Memory Card.

Steps to the Read / Write setting data with SD Memory Card

Power Block LCD Touch Panel Block Plate
Setting SETTING Detailed
Enter Password System
Button mode setting

Shut down the system before inserting or

removing SD Memory Card.
N ote: Please exit the system before you insert or remove SD Memory Card.
If you remove LCD Touch Panel Block from Power Block before the
system is shut down, the data may be corrupted and the equipment
may be damaged.

System Back End

SD Write SD Read SD IN / OUT

Groove to remove
In order to insert
or remove the SD card,
Dialog box Password Maintainance is it ready to shut down the system?

Yes No

Press "SD IN/OUT". Press "Yes".

SD Memory Card
●Panasonic made SD (HC) Memory Card [Optional]
After the screen light is turned off automatically, 4GB or less.
you can insert or remove SD Memory Card. (BACK) ※Please note that all other data processing operation in the
SD Memory Card can not be guaranteed.
※ When LCD Touch Panel Block is set into Power Block
after SD Memory Card is inserted or removed, SD Memory Card Slot
the screen will restart automatically.

30 31
 Read / Write setting data with SD Memory Card Detailed setting

Steps to the Read / Write setting data with SD Memory Card

Setting SETTING Detailed
Enter Password System
Button mode setting

How to read the setting data

How to write the setting data to SD Memory Card from SD Memory Card

System Back End System Back End

SD Write SD Read SD IN / OUT SD Write SD Read SD IN / OUT Read data from SD card.
Write the setting data The setting data is overwritten.
to the SD Memory Card? Are you sure?
Dialog box Password Maintainance Dialog box Password Maintainance

Yes No
Yes No

Press "SD Write". Press "Yes". Press "SD Read". Press "Yes".

Writing… Writing completed. Reading… Reading completed.

Close Close

Press "Close". Press "Close".

Writing error occurred. Reading error occurred.

When SD Memory Card is not When SD Memory Card is not
inserted, the following screen inserted,or the setting data is not
will be displayed. Close
correct, the following screen will be Close
displayed.

32 33
 Read / Write setting data with SD Memory Card Detailed setting

File format of reading and writing How to edit the setting data written to SD Memory Card
Ｒ

■Data Format ：CSV file The setting data written to SD Memory Card can be imported into Excel by following
Ｒ Ｒ

■Data Configuration ：Refer to the following chart. this operation. (For Microsoft Excel 2003 version )
■The setting data that can be edited ：All data except addresses for "Link control". (P.26 - P.27)
Ｒ Ｒ Ｒ

■How to edit the setting data ：Possible to edit by text editors,Microsoft Office Excel etc..
(※ You need to edit and save the data as "Text".(P.35 - P.37))

N ote When you write the setting data to SD Memory Card the file name will be named
"wrt9261.csv" automatically.
Please do not change this file name. If changed, it will not work. 4 Select delimiter "Comma"
and click "Next".

1 Open
Ｒ

Page 1 Settings a new Excel file.

Select "Data" - "Import External Data" -
"Import Data".
Page Name Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Switch 7 Switch 8
Setting settings settings settings settings settings settings settings settings

Page 2 Settings
5 Select all of the data portion in the
preview.
Cell to follow the column data format.
Page Name Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Switch 7 Switch 8 Select column data format "Text" and
Setting settings settings settings settings settings settings settings settings then click "Finish".

Page 3 Settings 2 Select "wrt9261.csv" , Click "Open".

Page Name Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Switch 7 Switch 8
Setting settings settings settings settings settings settings settings settings
6 Click "OK".

7 Excel
Ｒ
sheet displays the contents
Start Character Link Dialog State of SD Memor y Card in Excel
Beep Coloration Brightness Auto-Off Password
Screen Position Control Box Indication Spreadsheet Format.
3 Click "Next". Select “Text”.

34 35
 Read / Write setting data with SD Memory Card Detailed setting

The setting data that can be read and written（Factory default settings）
SDカードを用いて読書きするファイル書式 Heading Settings Guidelines for application setting Initial
Setting
Initial Set the brightness 0：Level1 1：Level2 2：Level3
Heading Settings Guidelines for application setting Brightness 2
Setting of the screen (Higher the level, brighter the number)
Horizontal Switch
Name of Page Page name data Within 10 characters Blank
Character Position Name and character 0：Left 1：Center 2：Right 1
position setup
Name of Switch Data Name Switch
Within 10 characters Blank
(Before Changing Line) (First half)
Backlight Automatic Backlight turn off Timer 0：10sec 1：30sec 2：1min 0
Name of Switch Data Name Switch
Within 10 characters Blank
(After Changing Line) (Second half)
The screen lock
Please fill in the two-digit number. Screen Locking 0：Invalid 1：Effective 0
Enable / disable setting:
Of vertical coupling: 10th of
Horizontal bond number: 1 digit Screen lock feature
Shape of switch Combining data switch (Example) When you join one vertical column, 11 ※This section is not set.
Address of Screen To use Blank
enter "41" type. The instrument can be set only on the screen.
Locking Virtual terminal address
※ If you want to join, please enter "00" from the
second switch. 0：Page1 1：Page2 2：Page3
Screen lock setup
Separate switch / Page of Screen Locking 3：Page1 and 2 4：Page1 and 3 7
Type of Switch 0：Individual 1：Dimmer 0 page
Dimmer switch 5：Page2 and 3 6：All 7：None

Color of Switch Switch display color 0：Default 1：Yellow 2：Blue 0 Display features
Display 0：Invalid 1：Effective 0
Address Type 0：Individual 1：Group Enable / Disable
Address data type 0
of Switch 2：Pattern 3：Dimmer
Display features
※This section is not set.
Enter a number. However, unset address is Address of Display to use Blank
The instrument can be set only on the screen.
Address of Switch Contacts represented by the blank. Blank Virtual terminal address
※ If the individual, enter "Channel ""-"" load number"
0：Page1 1：Page2 2：Page3
0：ON-Timer 30sec 1：ON-Timer 1min Setting displayed address 3：Page1 and 2 4：Page1 and 3
ON Control 6
2：ON-Timer 5min 3：ON-Timer 1hr when turned on 5：Page2 and 3 6：All 7：None
Timer Set of Switch Timer data 8
4：ON-Timer 2hr 5：Off -Delay 30sec
6：Off -Delay 1min 7：Off -Delay 5min 0：Page1 1：Page2 2：Page3
Setting displayed address
8：None OFF Control 3：Page1 and 2 4：Page1 and 3 6
when turned off
Beep Operation sound 0：OFF 1：ON 1 5：Page2 and 3 6：All 7：None

Start Screen 0 Confirmation Dialog

0：Page 1
At startup, the screen Dialog Box 0：Invalid 1：Effective 0
Start Screen 1：Page 2 Control
goes off
(Address of 0
When returning from 2：Page 3
Display : ON) Enable text based
settings / State Indication 0：OFF 1：ON 0
3：Last screen status
Start Screen The cleaning mode
(Address of Wakeup (The show was off the screen just before 0
To edit settings.
Display : OFF) the end Page) Password 4-digit 0123
Screenshot
Coloration 0：White 1：Silver Gray 2：Dark Brown 0
Color Settings

36 37
 System Detailed setting

Steps to the System

Setting SETTING Detailed

Enter Password System
Button mode setting

Dialog box is displayed when operating in the normal screen.

The operational error can be prevented.

Setting Dialog box How to change the password

Example of Dialog box

Meeting Sales System Back End Password change Esc OK

1F
Room 1 Division 1

Meeting Sales SD Write SD Read SD IN / OUT New Password

Room 2 Division 2
Clear
Do you want to control?
Legal Reference 2F Dialog box Password Maintainance
Division Yes Room
No 1 2 3 4 5

Accounting All lights 6 7 8 9 0

3F

Division OFF

Press "Password". Enter a new four-digit password and

press "OK".
Dialog box

System Back End Dialog box Esc OK

SD Write SD Read SD IN / OUT Dialog box when switch is operated. 2 ※When you forget your password and want to
Dialog box Password Maintainance Effective initialize your password without changing the
settings, please contact our nearest sales office.
Invalid 1

Press "Dialog box". ① Press "Effective" or "Invalid".

② Press "OK".

Please exit by pressing "End", and follow the instructions on the screen.

38 39
 Maintenance Detailed setting CLEAN mode / Cleaning Instructions

Steps to the Maintenance The screen can be locked temporarily (5 minutes) for cleaning purposes.

Setting SETTING Detailed

Enter Password System Maintenance
Button mode setting CLEAN mode
When the layout is changed, you can initialize the settings. Back
(Factory default settings) Meeting Sales

1F
Room 1 Division 1

Sales Please select the button.

Initialization
Meeting
Room 2 Division 2

2F
Legal Reference CLEAN mode SETTING
Division Room
mode
Maintainance Esc OK
Accounting All lights

3F
Division OFF
Initiali
-zation Are you sure
Will you return to
Screen
adjustment
the factory default settings? to initialize it?
Press "CLEAN mode".
Yes No Yes No
Version

Press "Setting Button".

Press "Initialization".
Press "Yes". Press "Yes".

You can adjust the touching point when it is not pointing properly.
When this screen is displayed,you can clean the screen.

Screen adjustment

1F
シーン
OFF
生産管理部 生産管理部

CLEAN mode 生産管理部

CLEAN mode
生産管理部

シーン
生産管理部

2F
生産管理部
The screen does not respond
Please correct with the stylus pen made of plastic. for 300 seconds.
The screen does not respond
生産管理部 生産管理部

シーン
When you correct with your finger, you may not be able to correct. ＊Compulse
生産管理部 return
生産管理部

ON
for 300 seconds. 生産管理部
Press ○ button
生産管理部
for more than five seconds.

シーン
生産管理部 生産管理部
1＋

ON
Maintainance Esc OK
＋
3 Maintainance Esc OK
＊Compulse return
Initiali
-zation
Screen Adjustment Initiali
-zation
Press ○ button
for more than five seconds.
Screen
adjustment
＋ 5 Screen
adjustment
Touch [+] to start.

Version 2＋ ＋
4 Version
Press and hold "Setting Button" for 5 seconds
"CLEAN mode" return to the normal screen
automatically after 300 seconds. or more. Then, it is possible to return to the
Press "Screen adjustment". Press the center After correction, the screen will be normal screen.
of "＋" from ① back to "Maintenance" automatically.
to ⑤ in order. Cleaning Instructions
Note
Touch panel correction failed.
Do not use sharp tipped pens Please wipe the screen and the body with
Please start over again,
or pencils. when failed. OK the cloth that is soaked in the neutral detergent
This may cause damages to the and then squeezed.
screen. Discoloration and the breakdown might occur if
you use the detergents other than the neutral
Please exit by pressing "End", and follow the instructions on the screen. detergent. Benzine
Thinner
Insect
killer
Alkaline detergent
Acid detergent

40 41
 Troubleshooting Ratings and Specifications
If the following messages appear, please confirm the mode and
take corrective action accordingly. Ratings
Error Message Cause Corrective Action Rated Input Voltage
Not for U.S.A For U.S.A
24 V AC (for Remote Control Transformer only) 24 V AC
●FULL-2WAY signal wire is broken. Please check the connection Rated Current Consumption 200 mA
FULL-2WAY of FULL-2WAY signal wire. Rated Input Signal Voltage ±24 V
Communication error ●FULL-2WAY signal wire is not connected.
occurred.
Only setting mode can be operated.
Please check the power of Rated Signal Current Consumption 15 mA
●Transmission unit is powered off.
the Transmission unit.
Specifications
Signal Wiring Method 2-Wire Non Polarized Wiring Method
System error occurred. 01

It is impossible Signal Transmission Method Cyclic Time Division Multiplex Transmission Method
to operate right now.
Please contact with the manager
of the system. Transmission Frequency 10 kHz ± 1 kHz
●Malfunction is found in hardware. Please replace the unit. Odd Number parity check, checksum
Error Detection Method

System error occurred. 02

Signal form Start Signal Channel Signal Load Control Signal Monitor Signal End Signal

It is impossible Applicable Transmission Unit WRT2050 Series , WRT2040 Series ,WRT2000 Series
to operate right now.
Please contact with the manager Not for U.S.A For U.S.A
of the system. Applicable Remote Control
WR2301-811,WR2311-821, WR2311-851
transformer
●Malfunction is found in the touch panel. Please replace the unit. Up to 24 Individual, Group and Pattern switches can be set in total.
System error occurred. 03
※ Please set Pattern / Group control data separately when you use for
It is impossible ●The touch panel is kept pressed Please remove the one Number of switches can be controlled Pattern / Group switches.
to operate right now.
Please contact with the manager with something. keeping pressing Up to 6 Dimmer switches can be set in total.
of the system.
※ The size of Dimmer switch is four times the minimum size of Individual or
※Other error messages during work are described in P.32, P.33,and P.40 . Pattern or Group switch.
Solid wire of 0.65 mm -1.6 mm in diameter
(Signal)
Stranded wire of 0.5 mm 2 - 2.0 mm 2 in section
If the unit is not functioning properly, before your contact manufacturer please check the following. Applicable wire gauge
Solid wire of 0.9 mm -1.6 mm in diameter
(24 V AC)
States Check points Corrective Action Stranded wire of 0.75 mm 2 - 2.0 mm 2 in section
0.2(4.9) MAX 0.2(4.9) MAX
Is the screen light auto-off ? Please touch the screen.

0.3(7.6)MAX

(Ф7.6)MAX

(Ф3.7)MIN
(3.7)MIN
The screen is Crimp Terminal Application
Is the fuse for the (remote control) transformer Please replace the fuse.

Ф0.15
0.15

Ф0.3
not displayed.
blown ? [inch(mm)]

Is the fuse for the (remote control) tansformer Please check the connected position. AC 24 V input wire length φ1.2 mm - φ1.6 mm(1.25 mm2 -2.0 mm2): 100m φ0.9 mm(0.75 mm2): 50m
connected ? Refer to P.6
COSMO Module Plates applicable to switches (WTC9222-8, etc.)[Optional]
Please select "ON" in Beep setting. Plate applied
It does not beep. Is "OFF" selected in Beep setting.
Refer to P.22 GLACIER Series Plates applicable to switches [Optional]
The screen is not Did you set the brightness at the side of Please set the brightness at the side of "Bright". Operating temperature 0 ℃ - ＋ 40 ℃
bright enough "Dark" ? Refer to P.24
LCD life (When the backlight is lighting) 20,000 hours (reference)
It is no response when The gap might be generated between the Please adjust the screen.
screen is touched. operation point and the display position. Refer to P.40 SD Memory Card SD Memory Card (4GB or less) [Optional]

42 43