Toggles and screen management

Below, you'll find an abbreviated list of commands that can be used in

AutoCAD.

Toggle General Features

Ctrl+G Toggle Grid

Ctrl+E Cycle isometric planes

Ctrl+F Toggle running object snaps

Ctrl+H Toggle Pick Style

Ctrl+Shift+H Toggle Hide pallets

Ctrl+I Toggle Coords

Ctrl+Shift+I Toggle Infer Constraints

Manage Screen

Ctrl+0 (zero) Clean Screen

Ctrl+1 Property Palette

Ctrl+2 Design Center Palette

Ctrl+3 Tool Palette

Ctrl+4 Sheet Set Palette

Ctrl+6 DBConnect Manager

Ctrl+7 Markup Set Manager Palette

Ctrl+8 Quick Calc

Ctrl+9 Command Line

Manage Drawings

Ctrl+N New Drawing

Ctrl+S Save drawing

Ctrl+O Open drawing

Ctrl+P Plot dialog box

Ctrl+Tab Switch to next

Ctrl+Shift+Tab Switch to previous drawing

Ctrl+Page Up Switch to previous tab in current drawing

Ctrl+Page Down Switch to next tab in current drawing

Ctrl+Q Exit

Ctrl+Shift+S Save drawing as

Toggle Drawing Modes

F1 Display Help

F2 Toggle text screen

F3 Toggle object snap mode

F4 Toggle 3DOsnap

F5 Toggle Isoplane

F6 Toggle Dynamic UCS

F7 Toggle grid mode

F8 Toggle ortho mode

F9 Toggle snap mode

F10 Toggle polar mode

F11 Toggle object snap tracking

F12 Toggle dynamic input mode

Manage Workflow

Ctrl+A Select all objects

Ctrl+C Copy object

Ctrl+K Insert hyperlink

Ctrl+X Cut object

Ctrl+V Paste object

Ctrl+Shift+C Copy to clipboard with base point

Ctrl+Shift+V Paste data as block

Ctrl+Z Undo last action

Ctrl+Y Redo last action

Ctrl+[ Cancel current command (or ctrl+\)

ESC Cancel current command

A, B, C
A

A ARC / Creates an arc

ADCENTER / Manages and inserts content such as blocks, xrefs, and hatch
ADC
patterns

AA AREA / Calculates the area and perimeter of objects or of defined areas

AL ALIGN / Aligns objects with other objects in 2D and 3D

AP APPLOAD / Load Application

AR ARRAY / Creates multiple copies of objects in a pattern

ARR ACTRECORD / Starts the Action Recorder

ARM ACTUSERMESSAGE / Inserts a user message into an action macro

ARU ACTUSERINPUT / Pauses for user input in an action macro

ACTSTOP / Stops the Action Recorder and provides the option of saving the
ARS
recorded actions to an action macro file

ATI ATTIPEDIT / Changes the textual content of an attribute within a block

ATT ATTDEF / Redefines a block and updates associated attributes

ATE ATTEDIT / Changes attribute information in a block

B BLOCK / Creates a block definition from selected objects

BC BCLOSE / Closes the Block Editor

BE BEDIT / Opens the block definition in the Block Editor

HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or
BH
gradient fill

BO BOUNDARY / Creates a region or a polyline from an enclosed area

BR BREAK / Breaks the selected object between two points

BS BSAVE / Saves the current block definition

BVS BVSTATE / Creates, sets, or deletes a visibility state in a dynamic block

C

C CIRCLE / Creates a circle

CAMERA / Sets a camera and target location to create and save a 3D perspective
CAM
view of objects

CONSTRAINTBAR / A toolbar-like UI element that displays the available geometric

CBAR
constraints on an object

CH PROPERTIES / Controls properties of existing objects

CHA CHAMFER / Bevels the edges of objects

CHK CHECKSTANDARDS / Checks the current drawing for standards violations

CLI COMMANDLINE / Displays the Command Line window

COL COLOR / Sets the color for new objects

CO COPY / Copies objects a specified distance in a specified direction

CT CTABLESTYLE / Sets the name of the current table style

CUBE NAVVCUBE / Controls the visibility and display properties of the ViewCube tool

CYL CYLINDER / Creates a 3D solid cylinder

D, E, F
D

D DIMSTYLE / Creates and modifies dimension styles

DAN DIMANGULAR / Creates an angular dimension

DAR DIMARC / Creates an arc length dimension

DIMBASELINE / Creates a linear, angular, or ordinate dimension from the baseline

DBA
of the previous or selected dimension

DBC DBCONNECT / Provides an interface to external database tables

DCE DIMCENTER / Creates the center mark or the centerlines of circles and arcs

DIMCONTINUE / Creates a dimension that starts from an extension line of a

DCO
previously created dimension

DIMCONSTRAINT / Applies dimensional constraints to selected objects or points on

DCON
objects

DDA DIMDISASSOCIATE / Removes associativity from selected dimensions

DDI DIMDIAMETER / Creates a diameter dimension for a circle or an arc

DED DIMEDIT / Edits dimension text and extension lines

DI DIST / Measures the distance and angle between two points

 DIVIDE / Creates evenly spaced point objects or blocks along the length or
DIV
perimeter of an object

DJL DIMJOGLINE / Adds or removes a jog line on a linear or aligned dimension

DJO DIMJOGGED / Creates jogged dimensions for circles and arcs

DL DATALINK / The Data Link dialog box is displayed

DLU DATALINKUPDATE / Updates data to or from an established external data link

DO DONUT / Creates a filled circle or a wide ring

DOR DIMORDINATE / Creates ordinate dimensions

DIMOVERRIDE / Controls overrides of system variables used in selected

DOV
dimensions

DR DRAWORDER / Changes the draw order of images and other objects

DRA DIMRADIUS / Creates a radius dimension for a circle or an arc

DIMREASSOCIATE / Associates or re-associates selected dimensions to objects or

DRE
points on objects

DRAWINGRECOVERY / Displays a list of drawing files that can be recovered after a

DRM
program or system failure

DSETTINGS / Sets grid and snap, polar and object snap tracking, object snap
DS
modes, Dynamic Input, and Quick Properties

DT TEXT / Creates a single-line text object

DVIEW / Defines parallel projection or perspective views by using a camera and

DV
target

DATAEXTRACTION / Extracts drawing data and merges data from an external

DX
source to a data extraction table or external file

E ERASE / Removes objects from a drawing

DDEDIT / Edits single-line text, dimension text, attribute definitions, and feature
ED
control frames

EL ELLIPSE / Creates an ellipse or an elliptical arc

EPDF EXPORTPDF / Exports drawing to PDF

ER EXTERNALREFERENCES / Opens the External References palette

EX EXTEND / Extends objects to meet the edges of other objects

EXIT QUIT / Exits the program

EXP EXPORT / Saves the objects in a drawing to a different file format

EXT EXTRUDE / Extends the dimensions of a 2D object or 3D face into 3D space

F

F FILLET / Rounds and fillets the edges of objects

FILTER / Creates a list of requirements that an object must meet to be included in a

FI
selection set

FS FSMODE / Creates a selection set of all objects that touch the selected object

FLATSHOT / Creates a 2D representation of all 3D objects based on the current

FSHOT
view

G, H, I
G

G GROUP / Creates and manages saved sets of objects called groups

GEOCONSTRAINT / Applies or persists geometric relationships between objects or

GCON
points on objects

GD GRADIENT / Fills an enclosed area or selected objects with a gradient fill

GEOGRAPHICLOCATION / Specifies the geographic location information for a

GEO
drawing file

HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or
H
gradient fill

HE HATCHEDIT / Modifies an existing hatch or fill

HI HIDE / Regenerates a 3D wireframe model with hidden lines suppressed

I INSERT / Inserts a block or drawing into the current drawing

IMAGEADJUST / Controls the image display of the brightness, contrast, and fade
IAD
values of images

IAT IMAGEATTACH / Inserts a reference to an image file

ICL IMAGECLIP / Crops the display of a selected image to a specified boundary

ID ID / Displays the UCS coordinate values of a specified location

IM IMAGE / Displays the External References palette

IMP IMPORT / Imports files of different formats into the current drawing
 INTERSECT / Creates a 3D solid, surface, or 2D region from overlapping solids,
IN
surfaces, or regions

INTERFERE / Creates a temporary 3D solid from the interferences between two

INF
sets of selected 3D solids

IO INSERTOBJ / Inserts a linked or embedded object

J, K, L
J

J JOIN / Joins similar objects to form a single, unbroken object

JOG DIMJOGGED / Creates jogged dimensions for circles and arcs

L LINE / Creates straight line segments

LA LAYER / Manages layers and layer properties

LAS LAYERSTATE / Saves, restores, and manages named layer states

LE QLEADER / Creates a leader and leader annotation

LEN LENGTHEN / Changes the length of objects and the included angle of arcs

MESHSMOOTHLESS / Decreases the level of smoothness for mesh objects by one

LESS
level

LI LIST / Displays property data for selected objects

LO LAYOUT / Creates and modifies drawing layout tabs

LT LINETYPE / Loads, sets, and modifies linetypes

LTS LTSCALE / Changes the scale factor of linetypes for all objects in a drawing

LWEIGHT / Sets the current lineweight, lineweight display options, and lineweight
LW
units

M, N, O
M

M MOVE / Moves objects a specified distance in a specified direction

MA MATCHPROP / Applies the properties of a selected object to other objects

ME MEASURE / Joins similar objects to form a single, unbroken object

MEASUREGEOM / Measures the distance, radius, angle, area, and volume of

MEA
selected objects or sequence of points

MI MIRROR / Creates a mirrored copy of selected objects

ML MLINE / Creates multiple parallel lines

MLA MLEADERALIGN / Aligns and spaces selected multileader objects

MLEADERCOLLECT / Organizes selected multileaders that contain blocks into rows

MLC
or columns, and displays the result with a single leader

MLD MLEADER / Creates a multileader object

MLEADEREDIT / Adds leader lines to, or removes leader lines from, a multileader
MLE
object

MLS MLEADERSTYLE / Creates and modifies multileader styles

MO PROPERTIES / Controls properties of existing objects

MESHSMOOTHMORE / Increases the level of smoothness for mesh objects by one

MORE
level

MS MSPACE / Switches from paper space to a model space viewport

MSM MARKUP / Opens the Markup Set Manager

MT MTEXT / Creates a multiline text object

MV MVIEW / Creates and controls layout viewports

GEOGRAPHICLOCATION / Specifies the geographic location information for a

NORTH
drawing file

NEWSHOT / Creates a named view with motion that is played back when viewed
NSHOT
with ShowMotion

NVIEW NEWVIEW / Creates a named view with no motion

O OFFSET / Creates concentric circles, parallel lines, and parallel curves

SURFOFFSET/ Creates a parallel surface or solid by setting an offset distance from

OFFSETSRF
a surface

OP OPTIONS / Customizes the program settings

3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical
ORBIT / 3DO
orbit only
OS OSNAP / Sets running object snap modes

P, Q, R
P

P PAN / Adds a parameter with grips to a dynamic block definition

PASTESPEC / Pastes objects from the Clipboard into the current drawing and
PA
controls the format of the data

PAR PARAMETERS / Controls the associative parameters used in the drawing

PARAM BPARAMETER / Adds a parameter with grips to a dynamic block definition

SURFPATCH / Creates a new surface by fitting a cap over a surface edge that forms
PATCH
a closed loop

PCATTACH POINTCLOUDATTACH / Inserts an indexed point cloud file into the current drawing

PE PEDIT / Edits polylines and 3D polygon meshes

PL PLINE / Creates a 2D polyline

PO POINT / Creates a point object

POFF HIDEPALETTES / Hides currently displayed palettes (including the command line)

POL POLYGON / Creates an equilateral closed polyline

PON SHOWPALETTES / Restores the display of hidden palettes

PR PROPERTIES / Displays Properties palette

PRE PREVIEW / Displays the drawing as it will be plotted

PRINT PLOT / Plots a drawing to a plotter, printer, or file

PS PSPACE / Switches from a model space viewport to paper space

PSOLID POLYSOLID / Creates a 3D wall-like polysolid

PURGE / Removes unused items, such as block definitions and layers, from the
PU
drawing

PYR PYRAMID / Creates a 3D solid pyramid

QC QUICKCALC / Opens the QuickCalc calculator

QCUI QUICKCUI / Displays the Customize User Interface Editor in a collapsed state

QUICKPROPERTIES / Displays open drawings and layouts in a drawing in preview

QP
images

Q QSAVE / Saves the current drawing

 QVDRAWING / Displays open drawings and layouts in a drawing using preview
QVD
images

QVDRAWINGCLOSE / Closes preview images of open drawings and layouts in a

QVDC
drawing

QVL QVLAYOUT / Displays preview images of model space and layouts in a drawing

QVLAYOUTCLOSE / Closes preview images of model space and layouts in the

QVLC
current drawing

R REDRAW / Refreshes the display in the current viewport

RA REDRAWALL / Refreshes the display in all viewports

RENDERCROP / Renders a specified rectangular area, called a crop window, within

RC
a viewport

RE REGEN / Regenerates the entire drawing from the current viewport

REA REGENALL / Regenerates the drawing and refreshes all viewports

REC RECTANG / Creates a rectangular polyline

REG REGION / Converts an object that encloses an area into a region object

RENAME / Changes the names assigned to items such as layers and dimension
REN
styles

REV REVOLVE / Creates a 3D solid or surface by sweeping a 2D object around an axis

RO ROTATE / Rotates objects around a base point

RENDERPRESETS / Specifies render presets, reusable rendering parameters, for

RP
rendering an image

RENDER / Creates a photorealistic or realistically shaded image of a 3D solid or

RR
surface model

RW RENDERWIN / Displays the Render window without starting a rendering operation

S, T, U
S

S STRETCH / Stretches objects crossed by a selection window or polygon

SCALE / Enlarges or reduces selected objects, keeping the proportions of the object
SC
the same after scaling

SCR SCRIPT / Executes a sequence of commands from a script file

SECTION / Uses the intersection of a plane and solids, surfaces, or mesh to create
SEC
a region
SET SETVAR / Lists or changes the values of system variables

SHA SHADEMODE / Starts the VSCURRENT command

SL SLICE / Creates new 3D solids and surfaces by slicing, or dividing, existing objects

SN SNAP / Restricts cursor movement to specified intervals

SO SOLID / Creates solid-filled triangles and quadrilaterals

SP SPELL / Checks spelling in a drawing

SPE SPLINEDIT / Edits a spline or spline-fit polyline

SPL SPLINE / Creates a smooth curve that passes through or near specified points

SECTIONPLANE / Creates a section object that acts as a cutting plane through 3D

SPLANE
objects

SPLAY SEQUENCEPLAY / Plays named views in one category

SPLIT MESHSPLIT / Splits a mesh face into two faces

SSM SHEETSET / Opens the Sheet Set Manager

ST STYLE / Creates, modifies, or specifies text styles

STA STANDARDS / Manages the association of standards files with drawings

SU SUBTRACT / Combines selected 3D solids, surfaces, or 2D regions by subtraction

T MTEXT / Creates a multiline text object

TA TEXTALIGN / Aligns multiple text objects vertically, horizontally, or obliquely

TB TABLE / Creates an empty table object

TED TEXTEDIT / Edits a dimensional constraint, dimension, or text object

THICKNESS / Sets the default 3D thickness property when creating 2D geometric

TH
objects

TI TILEMODE / Controls whether paper space can be accessed

TOL TOLERANCE / Creates geometric tolerances contained in a feature control frame

TOR TORUS / Creates a donut-shaped 3D solid

TP TOOLPALETTES / Opens the Tool Palettes window

TR TRIM / Trims objects to meet the edges of other objects

TS TABLESTYLE / Creates, modifies, or specifies table styles

U
UC UCSMAN / Manages defined user coordinate systems.

UN UNITS / Controls coordinate and angle display formats and precision.

UNISOLATEOBJECTS / Displays objects previously hidden with the

UNHIDE / UNISOLATE
ISOLATEOBJECTS or HIDEOBJECTS command.

UNI UNION / Unions two solid or two region objects.

V, W, X
V

VIEW / Saves and restores named views, camera views, layout views, and preset
V
views.

VGO VIEWGO / Restores a named view.

VP VPOINT / Sets the 3D viewing direction.

VPLAY VIEWPLAY / Plays the animation associated to a named view.

VS VSCURRENT / Sets the visual style in the current viewport.

VISUALSTYLES / Creates and modifies visual styles and applies a visual style to a
VSM
viewport.

W WBLOCK / Writes objects or a block to a new drawing file.

WE WEDGE / Creates a 3D solid wedge.

WHEEL NAVSWHEEL / Displays a wheel that contains a collection of view navigation tools.

X EXPLODE / Breaks a compound object into its component objects.

XA XATTACH / Inserts a DWG file as an external reference (xref).

XBIND / Binds one or more definitions of named objects in an xref to the current
XB
drawing.

XCLIP / Crops the display of a selected external reference or block reference to a

XC
specified boundary.

XL XLINE / Creates a line of infinite length.

XR XREF / Starts the EXTERNALREFERENCES command.

Y-Z
Y

ZOOM / Increases or decreases the magnification of the view in the current

Z
viewport.

ZEBRA ANALYSISZEBRA / Projects stripes onto a 3D model to analyze surface continuity.

ZIP ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package.