KTM SERIES NB / MB THREE-WAY BALL VALVES

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

A single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping

FEATURES

∙ Positive alignment of body.

∙ Blow-out proof stem for safety.
∙ Sphericity tolerance of the ball is
unsurpassed.
∙ Multiple layers of adjustable PTFE chevron
packing rings for standard model enable
excellent fugitive emission control.
∙ Positive position indication.
∙ Locking device capable.
∙ Heavy duty body construction.
∙ Machined ISO 5211 top mounting flange.
∙ Live load springs keep constant force on
stem-seal packing, ensuring seal integrity
and extended valve life.
∙ Dual shaft bearings for high cycle life
operation.
∙ Higher Cv values and less cost for diverting
which can be normally done with multiple
installation of valves.

2 seats feature
∙ EB1 compatible, co-polymer E-seat as
standard.
∙ Machined firesafe lip for metal touch to ball
GENERAL APPLICATION TECHNICAL DATA in case of fire. It also eliminates possibility of
seat deformation.
Diverting or mixing fluids. 2 seats (L-port) ∙ Lower operating torque, easing operation and
Model: Series NB reducing actuator cost.
Full bore: DN 40 - 350 (NPS 1½ - 14)
Reduced bore: DN 125 - 350 (NPS 5 - 14) 4 seats feature
Pressure rating: ASME Class 150, 300, 600 ∙ Equipped with 4 seats so that each port can
JIS 10K, 20K, 40K be used as an inlet.
Temperature: -29°C to 270°C (-20°F - 518°F) ∙ Available with L-port and T-port for variety of
(Option: up to 500°C/932°F) applications.
∙ E-seat as standard for MB1 Class 150 (MB11
4 seats (L and T-port) and MB21).
Model: Series MB
Full bore: DN 15 - 300 (NPS ½ - 12)
Reduced bore: DN 125 - 350 (NPS 5 - 14)
Pressure rating: ASME Class 150, 300, 600
JIS 10K, 20K, 40K
Temperature: -29°C to 150°C (-20°F - 302°F)

Emerson.com/FinalControl © 2017 Emerson. All Rights Reserved. VCTDS-02959-EN 21/11

KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

2-SEATS (L-PORT) SERIES NB - FULL BORE / SERIES NB - REDUCED BORE

25
7,8,13 20, 21, 22 24
14
4
23
1
9

15
2
5
11,12 W

3 STEM DETAIL
19
16
10

6 H 18
17
H1

Note: The illustration shows body construction of 3-way ball valve, Series NB11 in DN 80 (NPS 3)
Ød

PARTS LIST OPTIONS

No. Description Material
1 Body CF8M, CF8, or WCB ∙ NACE MR-01-75
2 Body cap CF8M, CF8, or WCB ∙ Gratite seat for high temp. service
3 Ball CF8M or CF8 (Series NB, 2 seats}
4 Shaft 316 S/S or 304 S/S ∙ Extension bonnet for low temp. service
L
5 Seat E-seat as standard (T or G seat for options) (Series NB, 2 seats)
6 Gasket R-PTFE ∙ CE Marking PED 97 / 23 / EC
7 Gland bolt A193 (G) B8 ∙ Special tests
8 Washer 316 S/S - X-ray (RT)
9 Gland flange CF8 - Liquid penetrant (PT)
10 Gland packing PTFE - Positive Material Identification (PMI)
11 Stud A193 (G) B8 or A193 (G) B7
12 Nut A194 (G) 8 or A194 (G) 2H
13 Live loading spring 304 S/S
14 Anti-static spring 316L S/S
15 Anti-static spring 316L S/S
16 Gland bearing PTFE
17 Thrust bearing PTFE
18 Shaft bearing R-PTFE
19 Snap ring 304 S/S
20 Spring washer 304 S/S
21 Bolt 304 S/S
22 Washer 304 S/S
23 Stopper 304 S/S
24 Handle Carbon steel
25 Indicator 304 S/S

2
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) - METRIC

2-SEATS (L-PORT) SERIES NB - FULL BORE / SERIES NB - REDUCED BORE

25
19 7,8,13

16 14
10 4
1
H 18
17
15
H1 2
5
11,12

Ød 3

ASME CLASS 150 / JIS 10K DIMENSIONS - NB1 (NB11 AND NB21)
Full bore - NB1 (NB11) Reduced bore - NB1 (NB21)
DN Ød L H W H1 Ød Ødo L H W H1
40 38 210 103 230 69 - - - - - -
50 51 220 113 230 79 - - - - - -
65 64 250 155 400 104 - - - - - -
80 76 260 164 400 113 - - - - - -
100 102 330 189 715 138 - - - - - -
125 127 370 311 1140 168 102 127 370 189 715 138
150 152 430 331 1140 188 127 152 430 311 1140 168
200 203 540 414 1510 248 152 203 540 331 1140 188
250 254 670 - - 328 203 254 670 414 1510 248
300 305 762 - - 387 254 305 762 - - 328
350 337 864 - - 450 305 337 864 - - 387

ASME CLASS 300 / JIS 20K DIMENSIONS - NB1 (NB12 AND NB22)
Full bore - NB1 (NB12) Reduced bore - NB1 (NB22)
DN Ød L H W H1 Ød Ødo L H W H1
40 38 220 103 230 69 - - - - - -
50 51 240 113 230 79 - - - - - -
65 64 270 155 400 104 - - - - - -
80 76 290 164 400 113 - - - - - -
100 102 350 189 715 138 - - - - - -
125 127 410 311 1140 168 102 127 410 189 715 138
150 152 460 331 1140 188 127 152 460 311 1140 168
200 203 570 414 1510 248 152 203 570 331 1140 188
250 254 720 - - 328 203 254 720 414 1510 248
300 305 860 - - 387 254 305 860 331 - 188

ASME CLASS 600 / JIS 40K DIMENSIONS - NB1

Full bore - NB1
L
DN Ød RF RJ H W H1
20 19 190 190 121 160 71
25 25 216 216 139 230 82
40 38 254 254 154 230 97
50 51 330 333 191 400 128 NOTE
80 76 356 359 255 715 148 Ødo = bore opening diameter on reduced bore valves
100 102 432 435 332.5 1140 190
150 152 559 562 - - 262

3
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) - IMPERIAL

2-SEATS (L-PORT) SERIES NB - FULL BORE / SERIES NB - REDUCED BORE

25
19 7,8,13

16 14
10 4
1
H 18
17
15
H1 2
5
11,12

Ød 3

ASME CLASS 150 / JIS 10K DIMENSIONS - NB1 (NB11 AND NB21)
Full bore - NB1 (NB11) Reduced bore - NB1 (NB21)
NPS Ød L H W H1 Ød Ødo L H W H1
1½ 1.50 8.27 4.06 9.06 2.72 - - - - - -
2 2.01 8.66 4.45 9.06 3.11 - - - - - -
2½ 2.52 9.84 6.10 15.75 4.09 - - - - - -
3 2.99 10.24 6.46 15.75 4.45 - - - - - -
4 4.02 12.99 7.44 28.15 5.43 - - - - - -
5 5.00 14.57 12.24 44.88 6.61 4.02 5.00 14.57 7.44 28.15 5.43
6 5.98 16.93 13.03 44.88 7.40 5.00 5.98 16.93 12.24 44.88 6.61
8 7.99 21.26 16.30 59.45 9.76 5.98 7.99 21.26 13.03 44.88 7.40
10 10.00 26.38 - - 12.91 7.99 10.00 26.38 16.30 59.45 9.76
12 12.01 30.00 - - 15.24 10.00 12.01 30.00 - - 12.91
14 13.27 34.02 - - 17.72 12.01 13.27 34.02 - - 15.24

ASME CLASS 300 / JIS 20K DIMENSIONS - NB1 (NB12 AND NB22)
Full bore - NB1 (NB12) Reduced bore - NB1 (NB22)
NPS Ød L H W H1 Ød Ødo L H W H1
1½ 1.50 8.66 4.06 9.06 2.72 - - - - - -
2 2.01 9.45 4.45 9.06 3.11 - - - - - -
2½ 2.52 10.63 6.10 15.75 4.09 - - - - - -
3 2.99 11.42 6.46 15.75 4.45 - - - - - -
4 4.02 13.78 7.44 28.15 5.43 - - - - - -
5 5.00 16.14 12.24 44.88 6.61 4.02 5.00 16.14 7.44 28.15 5.43
6 5.98 18.11 13.03 44.88 7.40 5.00 5.98 18.11 12.24 44.88 6.61
8 7.99 22.44 16.30 59.45 9.76 5.98 7.99 22.44 13.03 44.88 7.40
10 10.00 28.35 - - 12.91 7.99 10.00 28.35 16.30 59.45 9.76
12 12.01 33.86 - - 15.24 10.00 12.01 33.86 13.03 - 7.40

ASME CLASS 600 / JIS 40K DIMENSIONS - NB1

Full bore - NB1
L
NPS Ød RF RJ H W H1
¾ 0.75 7.48 7.48 4.76 6.30 2.80
1 0.98 8.50 8.50 5.47 9.06 3.23
1½ 1.50 10.00 10.00 6.06 9.06 3.82
2 2.01 12.99 13.11 7.52 15.75 5.04
3 2.99 14.02 14.13 10.04 28.15 5.83 NOTE
4 4.02 17.01 17.13 13.09 44.88 7.48 Ødo = bore opening diameter on reduced bore valves
6 5.98 22.01 22.13 - - 10.31

4
 20,21,27 26

8,14
9
24
KTM SERIES NB / MB THREE-WAY BALL VALVES 4

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) 11 1

12,13
5
4-SEATS (L AND T-PORT) SERIES MB - FULL BORE / SERIES MB - REDUCED BORE
25
2 3
22
20,21,27 26

8,14 6
9
24
4

11 1 H
12,13
5
STEM DETAIL
H1
15,23
2 3 17
10
7,18
19

16
6

Note: The illustration shows body construction of 3-way ball valve, Series MB11 in DN 80 (NPS 3)

L
PARTS LIST OPTIONS
No. Description Material 15,23
1 Body CF8M, CF8, or WCB 17 • NACE MR-01-75
10
2 Body cap CF8M, CF8, or WCB • CE Marking PED 97 / 23 / EC
7,18
3 Ball CF8M or CF8 19 • Special tests
4 Stem 316 S/S or 304 S/S - X-ray (RT)
16
5 Seat E-seat as standard for MB11 - Liquid penetrant (PT)
H-seat as standard for MB12 - Positive Material Identification (PMI)
6 Gasket PTFE or R-PTFE
7 Thrust washer 316 S/S
8 Gland bolt A193 (G) B8
9 Gland flange CF8
10 Gland packing PTFE
11 Snap ring 304 S/S
12 Stud A193 (G) B8 or A193 (G) B7
13 Nut A194 (G) 8 or A194 (G) 2H
14 Live loading spring 304 S/S
15 Anti-static spring 316L S/S
16 Anti-static spring 316L S/S
17 Gland bearing PTFE
18 Thrust bearing PTFE
19 Shaft bearing R-PTFE
20 Washer 304 S/S
21 Spring washer 304 S/S
22 Bolt 304 S/S
23 Snap ring 304 S/S
24 Stopper 304 S/S
25 Handle head Carbon steel
26 Handle/pipe Carbon steel
27 Indicator 304 S/S

NOTE
Please consult your local Emerson representative for 4 seats ASME Class 300 valves (MB12 and MB22)

5
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) - METRIC

4 - SEATS (L AND T - PORT) SERIES MB - FULL BORE / SERIES MB - REDUCED BORE

H1

Ød

ASME CLASS 150 / JIS 10K DIMENSIONS - MB1 (MB11 AND MB21)
Full bore - MB1 (MB11) Reduced bore - MB1 (MB21)
DN Ød L H W H1 Ød Ødo L H W H1
15 13 140 94 160 46 - - - - - -
20 19 150 108 230 52 - - - - - -
25 25 160 110 230 54.5 - - - - - -
40 38 210 158 400 97 - - - - - -
50 51 220 164 400 103 - - - - - -
65 64 250 215 715 113 - - - - - -
80 76 260 224 715 121.5 - - - - - -
100 102 330 304 1050 161 - - - - - -
125 127 430 327 1050 184 102 127 370 304 1050 161
150 152 510 314 - 223 127 152 430 327 1050 184
200 203 580 - - 281.5 152 203 500 - - 223
250 254 740 - - 395 - - - - - -
300 305 991 - - 477 305 337 991 - - 477

ASME CLASS 600 / JIS 40K DIMENSIONS - MB1

Full bore - MB1
L
DN Ød RF RJ H H1 W
15 13 300 298.5 124 67 230
20 19 300 300 124 67 230
25 25 306 306 124 67 230
40 38 410 410 234 129 715

NOTE
Ødo = bore opening diameter on reduced bore valves
Please consult your local Emerson representative for 4 seats ASME Class 300 valves (MB12 and MB22)

6
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) - IMPERIAL

4 - SEATS (L AND T - PORT) SERIES MB FULL BORE / SERIES MB REDUCED BORE

H1

Ød

ASME CLASS 150 / JIS 10K DIMENSIONS - MB1 (MB11 AND MB21)
Full bore - MB1 (MB11) Reduced bore - MB1 (MB21)
NPS Ød L H W H1 Ød Ødo L H W H1
½ 0.51 5.51 3.70 6.30 1.81 - - - - - -
¾ 0.75 5.91 4.25 9.06 2.05 - - - - - -
1 0.98 6.30 4.33 9.06 2.15 - - - - - -
1½ 1.50 8.27 6.22 15.75 3.82 - - - - - -
2 2.01 8.66 6.46 15.75 4.06 - - - - - -
2½ 2.52 9.84 8.46 28.15 4.45 - - - - - -
3 2.99 10.24 8.82 28.15 4.78 - - - - - -
4 4.02 12.99 11.97 41.34 6.34 - - - - - -
5 5.00 16.93 12.87 41.34 7.24 4.02 5.00 14.57 11.97 41.34 6.34
6 5.98 20.08 12.36 - 8.78 5.00 5.98 16.93 12.87 41.34 7.24
8 7.99 22.83 - - 11.08 5.98 7.99 19.69 - - 8.78
10 10.00 29.13 - - 15.55 - - - - - -
12 12.01 39.02 - - 18.78 12.01 13.27 39.02 - - 18.78

ASME CLASS 600 / JIS 40K DIMENSIONS - MB1

Full bore - MB1
L
NPS Ød RF RJ H H1 W
½ 0.51 11.81 11.75 4.88 2.64 9.06
¾ 0.75 11.81 11.81 4.88 2.64 9.06
1 0.98 12.05 12.05 4.88 2.64 9.06
1½ 1.50 16.14 16.14 9.21 5.08 28.15

NOTE
Ødo = bore opening diameter on reduced bore valves
Please consult your local Emerson representative for 4 seats ASME Class 300 valves (MB12 and MB22)

7
 1000 WCB
CF8M
CF8
900
WCB

KTM SERIES800NB / MB THREE-WAY BALL VALVES CF8M

CF8
6.0
2-SEATS (L-PORT) AND
700 4-SEATS (L AND T-PORT) - METRIC 6.0

600 WCB 6.0

5.0
CF8M 6.0
CF8 5.0
500
PRESSURE-TEMPERATURE RATINGS
5.0
4.0
400 DN 15, 20 FOR FULL BORE
LEGEND: 5.0
4.0
6.0
300 Dashed lines indicate body ratings.
4.06.0
3.0
200 WCB
WCB 4.0
3.0
5.0 CF8M
CF8M
100 3.05.0 CF8
CF8
2.0
4-seats - Upper limit 150°C 3.0
(302°F) 2.0
4.0 0
Class 300
Pressure (MPa)

0 100 200 300 400 500 2.04.0

1.0 NOTE
E seat is PTFE/PFA copolymer seat 2.0
1.0
3.0
E Seat

Seat ratings for Gratite seated valves are identical to

3.0
1.0
0 ASME body ratings
Class 150 1.0
-20Please
20consult
60 your
100local140 180 representative
220 260 300 0
2.0 Emerson for
1000 1000 -
02.0
4 seats ASME Class 300 valves (MB12 and MB22)
900 900 -20 20 60 100 140 180 220 260 300 0
1.0
800 800 1.0

6.0
0 700 700
-20 20 60 100 140 180 220 260 300 0
600 Temperature °C 600
-20 20 60 100 140 180 220 260 300
5.0
500 5006.0
DN 25 - 60 FOR FULL BORE DN 80, 100 FOR FULL BORE
400 DN 80 FOR REDUCED BORE 400 DN 100,125 FOR REDUCED BORE
4.0 6.0
6.0 5.0
300 300
3.0 5.0
5.0 200 2004.0

6.0 100 100

2.0 4.0
4.0
0 Class 300 03.0 Class 300
Pressure (MPa)

Pressure (MPa)

0 100 200 300 400 500 0 100

6.0 200 300 400 500
5.0
1.0 3.0
3.0 2.0
ES

ES

5.0
4.0
ea
eat

Class
1000150 Class 150
t

0 2.0
2.0 10001.0
-20 20 60 100 140 180 220 260 300
900 4.0
3.0 900
1.0 800 1.0
800 0
2.0 -20 3.020 60 100 140 180 220 260 300
700
700
0 0
600
-20 20 60 100 140 180 220 260 300 600 -20 2.0 20 60 100 140 180 220 260 300
1.0
Temperature °C Temperature °C
500
500
DN 125, 150 FOR FULL BORE 1.0 DN 200 FOR FULL BORE
0 400
DN 150, 200 FOR REDUCED BORE 400 DN 250 FOR REDUCED BORE
6.0
-20 20 60 100 140 180 220 260 300 6.0
300
300
0
200 -20 20 60 100 140 180 220 260 300
200 6.0
5.0 5.0
100
100

4.0 0 5.0
0 4.0
6.0 0 100 200 300Class
400
300 500 0 100 200 300 400 500Class 300
Pressure (MPa)

Pressure (MPa)

6.0

3.0 4.0
3.0
E
Se

5.0
E
at

Se

5.0
at

Class 150 3.0 Class 150

2.0 2.0
4.0
4.0

1.0 2.0
1.0
3.0
3.0

0 1.0
0
2.0
-20 20 60 100 140 180 220 260 300 -20 20 60 100 140 180 220 260 300
2.0
Temperature °C Temperature °C
0
1.0 -20 20 60 100 140 180 220 260 300
1.0
8
0
0 -20 20 60 100 140 180 220 260 300
-20 20 60 100 140 180 220 260 300
 1000

900

KTM SERIES800NB / MB THREE-WAY BALL VALVES

2-SEATS (L-PORT) AND
700 4-SEATS (L AND T-PORT) - IMPERIAL

600

500
PRESSURE-TEMPERATURE RATINGS
400
NPS ½, ¾
LEGEND:
1000
300 Dashed lines indicate body ratings.
1000
900 1000 WCB
WCB
200
CF8M
CF8M
900
800 900
100 CF8
CF8
1000 1000 4-seats - Upper limit 302°F
800
700 800 300
Class
0
900 900
700
600 0 100 700200 300 400 500
Pressure (psi)

NOTE
800 800
600
500 600 E seat is PTFE/PFA copolymer seat
700 700 Seat ratings for Gratite seated valves are identical to
500
400 500
E Seat

ASME body ratings

600 600
400
300 400 Please consult your local Emerson representative for
1000 1000
500 500 4 seats ASME Class 300 valves (MB12 and MB22)
300
200 300 WCB
900 900 CF8M
400 Class 150 400
200
100 200 WCB
CF8 WCB
800 800 CF8M CF8M
300 300
100
0 100 CF8 CF8
700 700 WCB WCB
2000 0 100 200 300 400
200 500
0 CF8M CF8M
Temperature
600 °F 600
100 0 100 200 300 400
100 0 500 100 200 300 400 500 CF8 CF8

500 0 500
0 NPS 1 - 2½FOR FULL BORE NPS 3, 4 FOR FULL BORE
0 100 3 FOR
NPS 200 REDUCED
300 400
BORE 0500 100 200 300 400 500 NPS 4, 5 FOR REDUCED BORE
1000 400 1000 400

1000
900 300 1000 1000
900 300 1000

900
800 200 900 900
800 200 900
1000 1000 1000 1000
800
700 100 800 800
700 100 800
900 900 900 900
700
600 700
Class 300 700
600 700
Pressure (psi)

0 0 Class 300
800 0 100 800
200 300 400 500 800 0 100
800 200 300 400 500
Pressure (psi)

600
500 600 600 500 600
700 700 700 700
500
400 500 500
400 500
600 600 600 600
400
300 1000 400 400
300 400
ES

1000
ES

500 500 500 500

eat

300
200 300 300
200 300
ea

900
900
t

400 400 400 400

200
100 200 200
100 200
Class800
150 800 Class 150
300 300 300 300
100
0 100 100
0 100
0 100 700
200 300 400 0 100 200 700 300 400 500
2000 200 500 2000 200
0 0
0 100 600
200 300 400
100 0 500 100 200 300 400 0 500100 200
600
300 400 0 500 100
100
200 300 400 500
100 100
Temperature °F Temperature °F
500
0
1000 0 0 500 0
0 100 200 400 0500 100
300 200 300 1000
4000 100
500 200 300 400 0500 100 200 300 400 500
400
1000
900 NPS 5, 6 FOR FULL BORE
1000 400 NPS 8 FOR FULL BORE
1000
900 1000
NPS 6, 8 FOR
300 REDUCED BORE NPS 10 FOR REDUCED BORE
900
800 900 900 300 900
800
1000 200 1000
800
700 800 1000 200 1000
800
700 800
900 100 900
700
600 700 900 100 900
700
600 700
800 800
600
500 0 600 800 800
600 0 600
0 100
Class200
300 300 400 500 500 0 100 200 300 400 500
700 700 Class 300
500
400 500 700 700
500
400 500
Pressure (psi)

Pressure (psi)

600 600
400
300 400 600 600
400
300 400
500 500
300
200 300 500 500
300
200 300
400 400
200
100 200 400 400
200
100 200
ES

300
E
ea

300 300
Se

100
0 100 300
t

100
0 100
at

0 100 200 300 400 500 0 100 200 300 400 500
2000 200
0 2000 200
Class 150 300 0
0 100 200 400 0 500 100
100
200 300 4000 500
100 200 300 400 0 500 100Class 150 300
200 400 500
100 100
100
0 0
0 0
0 100 200 300 400 0500 100 200 300 400
0 500
100 200 300 400 0500 100 200 300 400 500
Temperature °F Temperature °F

9
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

OPERATION FORM L-PORT - NB1 / MB1 (NB11, NB12, NB21, NB22 AND MB11, MB21)

A • A, B, C indicate the three supply ports. • Pattern 1 and Pattern 2 are standard flow
• Quarter turn and L-port construction allow for the following two flow patterns. directions for L-port valve.
(Pattern 1 and Pattern 2) • Arrows indicate pressure higher than
B C 0 MPa. For vacuum use please inquire
separately.
• Straight flow from B to C and C to B is not
possible. (The operation rotates 90°.)
A A A A
• Crossed out forms cannot be used.
• Leakage occurs on the flow channel side if
the pressure of arrow is higher than the
B C B C B C B C
flow channel side.

NOTES
FLOW PLAN A (PATTERN 1) FLOW PLAN A (PATTERN 2) 1. As for 2-seats (NB), Shut-off function is not
available at the center port (A) because the seat
A
is not installed there. Please pay attention to the
direction of the flow channel when using it. In
B C Pattern 3, the fluid pass through both flow channel
A to B and B to A.
2. Please consult your local Emerson representative
for 4 seats ASME Class 300 and JIS 20K valves
PATTERN 3 (MB12/MB22)

OPERATION FORM T-PORT - MB1 (MB11, MB21)

A • A, B, C indicate the three supply ports. • Pattern 1 and Pattern 2 are standard flow
• T-port available for below four patterns. directions for a 4-seat (T-port) valve.
• Arrows indicate pressure higher than
B C 0 MPa. For vacuum use please inquire
separately.
• Crossed out forms cannot be used.
A A A A • Leakage occurs on the flow channel side if
the pressure of arrow is higher than the
flow channel side.
B C B C B C B C
NOTE
Please consult your local Emerson representative for
A A A 4 seats ASME Class 300 and JIS 20K valves (MB12/
MB22)

B C B C B C

FLOW PLAN D (PATTERN 1) FLOW PLAN G (PATTERN 2)

A A A A

B C B C B C B C

A A A

B C B C B C

FLOW PLAN F (PATTERN 3) FLOW PLAN E (PATTERN 4)

10
KTM SERIES NB / MB THREE-WAY BALL VALVES
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

This page intentionally left blank.

11
VCTDS-02959-EN © 2014, 2021 Emerson Electric Co. All rights reserved 11/21. KTM is a mark owned by one of the companies in the Emerson Automation Solutions business
unit of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed
as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.

Emerson Electric Co. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of
any Emerson Electric Co. product remains solely with the purchaser.

Emerson.com/FinalControl