TANGO FT-NIR Spectrometer for Reflection Measurements

Specifications
Rugged NIR analyzer with sealed and desiccated optics for routine quality control. The analyzer
is equipped with a gold coated integrating sphere for the reflection measurement of samples.
Sample spinners for inhomogeneous samples are optionally available.
The analyzer is either equipped with a built-in data system with a touch screen or optionally
available with an external PC-based data system. The easy-to-use and GMP compliant TANGO
software package allows qualitative and quantitative analysis.

Design
< Housing: rugged, sealed and desiccated housing
< NIR source: air cooled Tungsten source (5 V/ 7W), average lifetime
9,000 h, pre-aligned, easily exchangeable by operator
< Interferometer: RockSolidTM, frictionless bearing, permanently aligned,
Quartz substrate beamsplitter with proprietary coating
< Laser diode: average lifetime 10+ years
< Detector: InGaAs diode, TE-cooled and temperature-stabilized
< Sample presentation: reflection measurements in cups, Petri dishes or disposable vials

background measurement w/o removing the sample

F T-NIR
Innovation with Integrity
 Performance Software
< Spectral range: 11,500 - 4,000 cm -1
< Resolution: better than 4 cm -1
< Wavenumber reproducibility: better than 0.04 cm -1, at 7,181 cm -1
< GMP compliant TANGO
< Wavenumber accuracy: better than 0.1 cm -1, at 7,181 cm -1 software with user-friendly
< Photometric accuracy: better than 0.1% T interface
< Product based operation
Electronics (Barcode reader friendly)
< Qualitative and/or quan-
< Data acquisition: 24-bit A/D converter
< Automation: microprocessor controlled optical bench, digital titative evaluations (no
speed control, automatic gain selection, internal method development)
< Customizable analysis
background, advanced system check
< Performance check: permanent on-line diagnostics of all optical com- reports
< Data exchange via USB
ponents, automation units and sampling accessories
< Connectivity: Ethernet interface, 10/100 Mbps stick and/or LAN

Dimensions
< Spectrometer (w x d x h): 292 mm x 438 mm x 175 mm

(plus max. 212 mm height for monitor)

Operating Environment
< Protection: NEMA 13 / IP54
< Operating temperature: 5° C to 35° C
< Storage temperature: -20° C to 70° C
< Operating relative humidity: < 80% non-condensing Product selection by pressing
< Power requirements: 100 to 240 VAC, 50/60 Hz, 75 W (typical 40 W) the respective icon
< Regulatory certification and

compliance: CE, WEEE and RoHS

Data System
< Embedded PC with 10.5” touch display; optional external PC data system

Validation
< TANGO software: the software package includes functions that facilitate
the use of the analyzer in a 21 CFR Part 11 compliant
environment
< Instrument qualification: TANGO software supports Operational Qualification (OQ)

and Performance Qualification (PQ) After the measurement the

PQ tests
< Validation manual: complete hardware and software validation

documentation is available as an option

services are available as an option

Bruker Optics
is ISO 9001 certified.
Covered by one or more of the following patents: DE102004025448; DE19940981.
Additional patents pending. Laser class 1 product.

www.bruker.com/optics Bruker Optics Inc. Bruker Optik GmbH Bruker Hong Kong Ltd.
Billerica, MA · USA Ettlingen · Germany Hong Kong
Phone +1 (978) 439-9899 Phone +49 (7243) 504-2000 Phone +852 2796-6100
Fax +1 (978) 663-9177 Fax +49 (7243) 504-2050 Fax +852 2796-6109
[email protected] [email protected] [email protected]

Bruker Optics is continually improving its products and reserves the right to change specifications without notice.
© 2013 Bruker Optics BOPT-4000085-02