Faster, smarter and better - the quick service blender of tomorrow has arrived. Designed to increase speed of service in every way, MagnaBlend redefines efficiency as we know it.
Speed of Service Designed to increase speed of service in every way, a stunning 9-second blend time helps to consistently deliver delicious blended frozen beverages throughout all dayparts.
Integrated Design The integrated shaved ice dispenser and rinse station remove the need for employees to move back and forth between separate prep areas. Simply blend, rinse and repeat..
Simple Operation User friendly keypad allows for 5 beverage profiles (6 beverage profiles on international offerings) using 4 sizes and up to 2 - 16 oz. (473 ml) drinks per blending cycle.
Ice Hopper Standard ice bin holds approximately 13 lbs (5.9 kgs)of ice. The optional extra- large bin holds approximately 28 lbs (12.7 kgs) of ice.
Blender Pitchers BPA-free. Blends up to 2 - 16 oz. (473 ml) drinks at once. The MagnaBlend comes with two blending pitchers to maximize output. The international version (50/60Hz) of the blending pitcher comes with a top hand guard.
Breakthrough Magnetic Technology
Shown with standard Instead of relying on direct-contact gear mechanisms that can wear down, ice hopper MagnaBlend eliminates friction by utilizing magnetic force. A sealed design locks out damaging moisture.
Customizable Menu Connect to a laptop to use the recipe software to create signature drinks. Easily share recipes with your entire franchise network.. Shown with 6 recipe buttons on international Liquid Sweetener Port models only For added beverage options, easily connect bag-in-box liquid sweetener via the rear quick connect port. Simply select the “No Sugar” button on the keypad to automatically remove the sweetener from the recipe profile. (This feature is not available on international units.)
750 N. Blackhawk Blvd. Rockton, Illinois 61072 SB25 Blending Station
Conforms to UL STD 763 800-255-0626 Certified to CSA STD C22.2 NO195 Rinse Station Phone 815-624-8333 Fax 815-624-8000 ISO 9001:2015 Conforms to UL STD 921 Certified to CSA STD C22.2 NO 168 www.taylor-company.com Registered Firm International Models info@taylor-company.com Standard 8 Certified to IEC 60335 SB25
Weights lbs. kgs. Specifications
Net 47 21.3 Electrical Crated 85 38.6 Two dedicated electrical connections are required. See the electrical chart for cu. ft. cu. m. the proper electrical requirements. Blender must be positioned within Volume 39.2 1.11 5 feet (1.5 m) of electrical outlets. International rinse station power supply Dimensions in. mm. includes replaceable multiple country plugs. Width 16-5/16 415 Clearance Depth 25-1/2 648 No additional clearance is required on either side of the unit for air inlet Height 27-1/2 698 or discharge. 4 inches (100 mm) of clearance is required behind the unit to allow Counter Clearance --- --- for proper routing of the drainage hardware. *Designed to rest on a plastic pad directly on the counter top. 12 inches (304 mm) of air clearance is required above the unit to allow U.S. & Canada Electrical Total Supplied Provided With for proper loading of ice into the ice hopper. Amps with Cord Power Supply Water Blender Station - 115/60/1 Air 10 5-15P 100-115V NA 3/8 inch hot or cold water supply line for rinse station. Minimum 55 PSI Rinse Station - 115/60/1 Air 1 NA YES required with a maximum of 100 PSI. Temperature-Maximum 125°F (52°C). For best results, filtered water is required. International Electrical Total Supplied Provided With Blender Station Amps with Cord Power Supply Drain 100-115V 50/60Hz /1PH 10 YES NA A drain is required. The drain must be able to accommodate a 1-1/8 inch (29 mm) diameter drain tube. 208-240V 50/60Hz /1PH 10 YES NA A minimum of 1 inch (25 mm) air gap is required between the end of the Rinse Station drain tube and the drain to ensure proper flow. 100-240V 50/60Hz /1PH 1 NA YES IMPORTANT: Install blender on a level surface within 10 feet (3.05 m) of drain. This unit may be manufactured in other electrical characteristics and may have additional regulatory agency approvals. Consult the local Taylor Distributor for other electrical characteristics and agency Commercial Drop Ice approvals based on specific electrical and country requirements. (For exact electrical information and approval marks, always refer to the data label of the unit.) Commercial drop ice is recommended for maximum performance and drink consistency. Continuing research results in steady improvements; therefore, these specifications are subject to change without notice. Options • Extra-large ice hopper
Bidding Specs Accessories
• Anti-vibrational feet Electrical: Volt Hz ph • Sound reduction door Neutral: Yes No Cooling: Air Water NA
