Scribd
Upload
155 views2 pages

TDS 600

The EC/TDS-600 online Conductivity/TDS Controller has a measurement range of 0-2000uS, 0-2000ppm, or 0-9999uS/cm. It has an accuracy of 1.5% of the full scale and automatic temperature compensation. It has a 31⁄2 Bit LCD display and uses two groups of ON/OFF relay outputs for high and low limits as well as isolated and migrated 4-20mA or 0-5V current outputs. It is commonly used for monitoring and controlling water systems in applications like electrodialysis, reverse osmosis, and industrial water processes.

Uploaded by

Nicolae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
155 views2 pages

TDS 600

The EC/TDS-600 online Conductivity/TDS Controller has a measurement range of 0-2000uS, 0-2000ppm, or 0-9999uS/cm. It has an accuracy of 1.5% of the full scale and automatic temperature compensation. It has a 31⁄2 Bit LCD display and uses two groups of ON/OFF relay outputs for high and low limits as well as isolated and migrated 4-20mA or 0-5V current outputs. It is commonly used for monitoring and controlling water systems in applications like electrodialysis, reverse osmosis, and industrial water processes.

Uploaded by

Nicolae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

online Conductivity/TDS Controller EC,TDS-600

Function Model EC/TDS-600 online Conductivity/TDS Controller


Range 0-2000uS, 0-2000ppm,0-9999uS/cm(0-10mS),0-5000PPM0-20mS, 0-200mS
Accuracy 1.5%(FS)
Temp. Comp. The 25℃ basis, automatic temperature compensation
Operation Temp. 0～50℃, with normal temp. Pt. Black or Stainless steel sensor
60～100℃, with high temperature Stainless steel sensor sensor(optional)
Sensor K= 0.1 (0-20uS, 0-10ppm)
K=0.1(0-200uS, 0-100ppm),
K=1.0 or 10.0 (0-2000uS/ ppm,0-9999uS/ppm, 0-10mS, 0-20mS),
K=30.0cm (0-200mS)
Display 3½ Bit LCD

page 1 / 2
Control output signal Two groups, ON/OFF High limit and low limit relay
Capacity of contact point 3A/AC 250V (with resistant loads)
Current output signal 4-20mA/ 0-5V DC signal output, isolated and migrated
Communication output Moudbus RTU RS485 (optional)
Power AC 110/220V±10%, 50/60Hz, DC 24v
Working environment Ambient Temp. 0～50℃, Relative Humidity ≤85%
Overall dimensions 48×96×100mm (H X W X D), Hole size: 45×92mm (H X W)
Installation Mode Panel Mounted(Embedded)
Cable length: 5m or as per request
Widely used for electrodialysis, reverse osmosis, ion exchange water system, hydroponic
Fertilizer,cooling water control system and general industrial water online monitoring and controlling.

Product link：https://www.jirsensor.com/online-conductivitytds-controller-ectds-600-products/

page 2 / 2
Powered by TCPDF (www.tcpdf.org)

You might also like