Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Why is Water Necessary?
Water is found everywhere on Earth; it covers around 70% of the Earth's surface in the form of rivers, lakes, oceans and
underground water. Of these, the oceans represent approximately 97% of the total water present on the planet.
Everywhere that water is found on Earth; life is also found. Therefore, there is little wonder that between 50% and 80%
of all life forms exist in the ocean.
Water is needed for almost all of life’s processes, including:

● digestion
● circulation
● respiration
● transport
● controlling internal body temperature and
● maintaining the internal environment

The human body is made up of approximately 70% water. This value is an average measure of all the main areas of
the body. The image below depicts the concentration of water in these areas.

Copyright © iTeachly.com 1
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Even those organisms which seem to be able to survive in very hot, dry climates still require water and have mechanisms
which enable them to conserve this vital liquid.

The Properties of Water

There are several properties of water which make it essential to living things. These properties include its structure and
its ability to act as a solvent for almost any substance.

1. The Structure of Water

The water molecule contains three atoms; two hydrogen atoms joined to one oxygen atom; this gives it the chemical
formula of H2O. The chemical equation for the formation of water is shown below:

The hydrogen atoms are bonded to the oxygen atom with covalent bonds. In these bonds, the valence electron on each
hydrogen atom is shared with oxygen, so that all three atoms can complete their valence shells. Each water molecule is
bonded to other water molecules through hydrogen bonding. These are weak bonds which keep the water molecules
together as a substance.

Covalent bonding – the details

Oxygen has 6 electrons in its valence shell. This shell is only partially full and can fit up to eight. This means that oxygen
must add two more electrons or find another atom which it can share its electrons with in order to become stable.

Copyright © iTeachly.com 2
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Hydrogen, in contrast, only has one valence electron. This means that in order to
complete its valence shell it needs either lose that one electron or share it with
another atom. In the case of water, hydrogen and oxygen share their electrons,
completing each other’s valence shells and forming a single covalent bond. This can
be seen in the diagram to the right.

The Polarity of Water

The electronegativity of an atom is the measure of its ability to pull electrons
towards itself. Oxygen is more electronegative than hydrogen. This means
that in the water molecule, the electrons which belong to hydrogen will be
much closer to the oxygen atom than the hydrogen atom.

Since electrons have a negative charge, and they are closer to the oxygen
atom, oxygen acquires this negative charge. This also means that hydrogen
acquires a partial positive charge since the electrons are further away from
it. The difference in charge across the chemical bonds in water, therefore,
make it a polar molecule.

Molecular Geometry of Water

Water molecules show a bent molecular geometry. This shape occurs due to the
arrangement of electrons around the central oxygen atom. Oxygen has two pairs of
electrons in its valence shell and two single (unpaired) electrons. These two unpaired
electrons are shared with two hydrogen atoms to form the covalent bonds in the
water molecule.
Since electrons are negative, they repel each other. This results in the electrons in
the molecule spacing themselves out so that they have the least repulsion between
each electron pair, resulting in the bent conformation.

Copyright © iTeachly.com 3
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Hydrogen bonds between water molecules

Not only are there bonds between the atoms within
the water molecule, but there are also bonds which
exist between the molecules. These are called
hydrogen bonds and exist as a result of the partial
charges on the atoms mentioned in the section above.

The hydrogen atoms partially positive charge makes it

attractive to the partially negative charge of the oxygen on another water molecule. This enables a weak bond to form
and holds the water together, with each water molecule being bonded to four other water molecules.

It is the hydrogen bonding as well as the molecular geometry, and the polarity or the high difference in electronegativity
in the water molecule which gives water some its unique properties.

2. The Phases of Water

In nature, water exists as three states - solid ice, liquid water and as a gas - water vapor or steam. These states occur
within a very narrow temperature range, all of which occur on Earth. Other substances may occur as a liquid or vapor on
Earth but, their other states only occur in temperatures or pressures which would be too extreme for living organisms to
survive in.

● Example 1: Methane
Methane (CH4) was initially thought to play a similar role to water as a universal solvent. However, methane only
exists as a liquid in very cold temperatures (182 degrees Celsius) which much too cold for living organisms.

● Example 2: Ammonia
Ammonia, like water, is relatively abundant in the universe and is polar like water. However, scientists are yet to
find any large amounts of ammonia anywhere in our solar system; therefore this has been ruled out as a
universal solvent.

Copyright © iTeachly.com 4
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

In general, as a substance cools and then solidifies, its atoms and molecules move closer together. The closer the
particles are, the less energy they possess.

Water behaves differently:

In the solid phase, water expands, and the particles move further apart. Coldwater, at 4 degrees Celsius is very dense
and shows particles in more tightly-packed conformation than seen in solid ice. As heat is added, the water expands once
more, and the molecules spread out. This property explains why icebergs are partially seen floating on top of the water.

Copyright © iTeachly.com 5
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

While freezing, molecules of water lose a certain amount of heat energy and move very
slowly, making it easier for them to form hydrogen bonds. Their crystalline shape now is
open and hexagonal which causes their increase in volume. The volume and density of
water are inversely proportional. Therefore, as density decreases, the volume increases.

High boiling point and melting point

● Melting point is temperature at which a substance changes from a solid to a
liquid.
● Boiling point is the temperature at which a substance changes from a liquid
to a vapor or gas.

Oxygen is found in group 16 of the periodic table. In general, elements found in the
same group show similar properties.
The table below shows the boiling and melting points for other group 16 elements
when bonded to hydrogen.

Compound Boiling point Melting point

Hydrogen Telluride -4°C -49°C
Hydrogen Selenide -42°C -64°C
Hydrogen Sulfide -62°C -84°C
Water 100°C 0°C

Using this information, water should have a boiling point of less than 100°C and a melting point less than 0°C. However,
water, at normal atmospheric pressure, boils at 100°C and ice melts at 0°C, which does not follow the pattern seen in
other group 16 hydrides.

The abnormal boiling and melting points of water are due to the presence of the hydrogen bonds. These bonds require
additional energy and must be broken before the individual water molecules gain sufficient heat energy to move apart
and change state from ice to water (melting) or from water to steam (boiling).

Copyright © iTeachly.com 6
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Latent and Specific Heat Capacity
The amount of energy that needs to be added to 1 gram of a substance to
break its bonds and change its state is called its latent heat. This property
makes water very resistant to changes in temperature and explains why it’s
so useful for putting out fires. Therefore we can say that water has a high
latent heat of melting and evaporation.

Specific heat is the amount of heat energy one gram of a substance must
gain or lose to change its temperature by one degree Celsius. For water,
this value is one calorie or 4.184 Joules which is the highest specific heat
capacity of any liquid.

Relevance to Biology
A high specific heat capacity enables the bodies of endothermic organisms such as humans to maintain their body
temperature in different environments. It also allows large bodies of water e.g. the ocean to absorb large amounts of
energy from the sun without changing temperature. Many organisms rely on a constant temperature in order to
maintain their food supply, oxygen levels etc.

Cohesion
Water molecules stick together. This is called cohesion.
This is the attraction between molecules of the same substance. The
cohesive properties of water cause the molecules on the surface of water
to be drawn inward, which is why drops of water form beads on a smooth
surface. Cohesion also explains why some insects and spiders can walk on
a pond’s surface. This property also allows water to move through narrow
spaces such as the roots and shoots of plants and the smallest capillaries in
the human body as cohesion holds the column of water together as it
moves.

Copyright © iTeachly.com 7
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Cohesion and Surface Tension

The cohesiveness of water is due to its hydrogen bonding. This
gives it the highest surface tension of any liquid. Surface tension
describes the ability of a liquid to shrink into the minimum
surface area possible and explains why water exists as droplets
rather than a thin layer.

The water molecules on the surface of a water droplet are

attracted to the molecules which are directly below them. In
contrast, the water molecules underneath the top layer are
attracted to molecules in every direction. Surface tension
explains why certain organisms such as water striders can walk on
the surface of water.

Adhesion
Water also shows adhesion. This is the attraction between molecules of different substances and can be seen by the
meniscus of a volume of water in a measuring cylinder. The surface of the water in the measuring cylinder shows a

Copyright © iTeachly.com 8
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

gentle curve in the center due to the adhesion between liquid and glass molecules. The curve appears because the
adhesion between the different substances is stronger than cohesion between the water molecules.
Adhesion between water and glass also allows water to rise in a narrow tube against the force of gravity. This effect is
called capillary action and is responsible for pulling water out of the roots of a plant and up
into its stems and leaves.

3. Water as a universal polar solvent

Water is not always found in its pure form, often occurring as a part of a mixture. A mixture is
defined as the combination of two substances that are not chemically bonded together. Water
forms two types of mixtures, a solution and a suspension. A solution has its components
evenly distributed throughout, whereas a suspension shows an uneven distribution. In many
cases, the suspension must be shaken to redistribute the components as the solute (dissolved
solids) will settle on the bottom of the container over time.

If a spatula of table salt (NaCl) is placed in a beaker of warm water, the sodium and chloride ions on the surface of the
crystal are attracted to the polar water molecules. This causes the ions to break away from the crystal structure and
become surrounded by water molecules. The ions gradually become dispersed in the water, forming a salt-water
solution. In this example, the table salt is the solute, since it is the substance being dissolved. Water is the solvent –the
substance in which the solute dissolves. Water’s polarity gives it the ability to dissolve both ionic compounds and other
polar molecules, such as sugar. It is for this reason that water is often called the ‘universal solvent’. Being the universal
solvent enables water to carry substances such as essential ions (electrolytes) into and out of the cell.

Copyright © iTeachly.com 9
Name: _________________________________________________ Period: ___________ Date: ________________

Properties of Water Guided Notes – Teacher’s Edition

Water is a Neutral Substance.

Water is a neutral substance which means that it is neither an acid nor a base and has a pH of 7. Therefore, it does not
affect blue or red litmus paper. This effect is due to the positive hydrogen ions being present in equal proportions to the
negative OH ions.

Copyright © iTeachly.com 10