Appendix 2

Certificate Number: 1192m Issue: 3

Issued to: PPG Coatings Europe BV

For: STEELGUARD™651

Required intumescent Dry Film Thickness (dft) in millimetres

(mm) of STEELGUARD™ 651 for I- and H- section columns,
with four sided exposure

This appendix forms part of Certificate Number 1192m, Issue 3, issued to:

PPG Coatings Europe BV

Oceanenweg 2
1047 BB Amsterdam
The Netherlands
on 29 November 2019

To check the validity of the Certificate and Appendix please visit www.redbooklive.com

This Appendix is part of the Product Approval Certificate and shall not be distributed separately.

The certificate and this appendix are issued subject to terms and conditions. For details visit
www.redbooklive.com/terms

BRE Global Ltd, Garston, Watford, WD25 9XX

T: +44 (0)333 321 8811 E: [email protected]
LPCB is a registered trademark of BRE (the Building Research Establishment Ltd.)

BF1305MTA-A Rev1.0 Page A2-1 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Table 1 Required thickness (mm) of Steelguard 651 for a fire resistance period of 30 minutes

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

70 0.212 0.187 0.187 0.187 0.187 0.187 0.187 0.187

75 0.241 0.187 0.187 0.187 0.187 0.187 0.187 0.187

80 0.269 0.187 0.187 0.187 0.187 0.187 0.187 0.187

85 0.298 0.187 0.187 0.187 0.187 0.187 0.187 0.187

90 0.326 0.187 0.187 0.187 0.187 0.187 0.187 0.187

95 0.355 0.187 0.187 0.187 0.187 0.187 0.187 0.187

100 0.384 0.187 0.187 0.187 0.187 0.187 0.187 0.187

105 0.412 0.187 0.187 0.187 0.187 0.187 0.187 0.187

110 0.441 0.211 0.187 0.187 0.187 0.187 0.187 0.187

115 0.470 0.238 0.187 0.187 0.187 0.187 0.187 0.187

120 0.498 0.264 0.187 0.187 0.187 0.187 0.187 0.187

125 0.527 0.290 0.187 0.187 0.187 0.187 0.187 0.187

130 0.556 0.317 0.187 0.187 0.187 0.187 0.187 0.187

135 0.584 0.343 0.187 0.187 0.187 0.187 0.187 0.187

140 0.613 0.369 0.187 0.187 0.187 0.187 0.187 0.187

145 0.641 0.396 0.187 0.187 0.187 0.187 0.187 0.187

150 0.670 0.422 0.187 0.187 0.187 0.187 0.187 0.187

155 0.699 0.448 0.205 0.187 0.187 0.187 0.187 0.187

160 0.727 0.474 0.231 0.187 0.187 0.187 0.187 0.187

165 0.756 0.501 0.258 0.187 0.187 0.187 0.187 0.187

170 0.785 0.527 0.284 0.201 0.187 0.187 0.187 0.187

175 0.813 0.553 0.310 0.223 0.187 0.187 0.187 0.187

180 0.842 0.580 0.337 0.246 0.200 0.187 0.187 0.187

BF1305MTA-A Rev1.0 Page A2-2 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

185 0.871 0.606 0.363 0.268 0.219 0.188 0.187 0.187

190 0.899 0.632 0.390 0.290 0.238 0.204 0.187 0.187

195 0.928 0.659 0.416 0.313 0.257 0.220 0.196 0.187

200 0.957 0.685 0.443 0.335 0.277 0.237 0.210 0.187

205 0.985 0.711 0.469 0.357 0.296 0.253 0.223 0.187

210 1.014 0.738 0.495 0.380 0.315 0.270 0.237 0.187

215 1.036 0.764 0.522 0.402 0.334 0.286 0.250 0.187

220 1.058 0.790 0.548 0.424 0.354 0.303 0.264 0.187

225 1.080 0.817 0.575 0.447 0.373 0.319 0.278 0.187

230 1.101 0.843 0.601 0.469 0.392 0.335 0.291 0.187

235 1.123 0.869 0.627 0.491 0.411 0.352 0.305 0.187

240 1.144 0.896 0.654 0.514 0.431 0.368 0.318 0.187

245 1.166 0.922 0.680 0.536 0.450 0.385 0.332 0.187

250 1.188 0.948 0.707 0.558 0.469 0.401 0.345 0.187

255 1.209 0.975 0.733 0.581 0.488 0.417 0.359 0.187

260 1.231 1.001 0.759 0.603 0.508 0.434 0.373 0.187

265 1.252 1.025 0.786 0.626 0.527 0.450 0.386 0.187

270 1.274 1.044 0.812 0.648 0.546 0.467 0.400 0.187

275 1.296 1.063 0.839 0.670 0.565 0.483 0.413 0.187

280 1.317 1.082 0.865 0.693 0.585 0.500 0.427 0.187

285 1.339 1.101 0.892 0.715 0.604 0.516 0.441 0.187

290 1.361 1.120 0.918 0.737 0.623 0.532 0.454 0.187

295 1.382 1.139 0.944 0.760 0.642 0.549 0.468 0.187

300 1.404 1.158 0.971 0.782 0.662 0.565 0.481 0.187

BF1305MTA-A Rev1.0 Page A2-3 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

305 1.425 1.177 0.997 0.804 0.681 0.582 0.495 0.187

310 1.447 1.196 1.022 0.827 0.700 0.598 0.509 0.187

315 1.469 1.215 1.040 0.849 0.719 0.615 0.522 0.191

320 1.490 1.234 1.059 0.871 0.739 0.631 0.536 0.206

325 1.512 1.253 1.077 0.894 0.758 0.647 0.549 0.221

330 1.533 1.273 1.095 0.916 0.777 0.664 0.563 0.236

335 1.555 1.292 1.114 0.938 0.796 0.680 0.577 0.250

340 1.577 1.311 1.132 0.961 0.816 0.697 0.590 0.265

345 1.598 1.330 1.150 0.983 0.835 0.713 0.604 0.280

350 1.620 1.349 1.169 1.005 0.854 0.730 0.617 0.295

355 1.641 1.368 1.187 1.026 0.873 0.746 0.631 0.310

360 1.663 1.387 1.205 1.044 0.893 0.762 0.645 0.324

365 1.685 1.406 1.224 1.061 0.912 0.779 0.658 0.339

370 1.706 1.425 1.242 1.079 0.931 0.795 0.672 0.354

375 1.728 1.444 1.260 1.097 0.950 0.812 0.685 0.369

Table 2 Required thickness (mm) of Steelguard 651 for a fire resistance period of 60 minutes

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

70 1.241 0.794 0.589 0.445 0.337 0.220 0.187 0.187

75 1.279 0.856 0.638 0.484 0.373 0.255 0.187 0.187

80 1.317 0.918 0.687 0.524 0.409 0.290 0.208 0.187

85 1.354 0.980 0.736 0.564 0.445 0.325 0.240 0.187

90 1.392 1.031 0.785 0.603 0.481 0.360 0.273 0.187

BF1305MTA-A Rev1.0 Page A2-4 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

95 1.430 1.066 0.834 0.643 0.517 0.396 0.306 0.203

100 1.468 1.100 0.883 0.682 0.553 0.431 0.338 0.234

105 1.505 1.135 0.932 0.722 0.589 0.466 0.371 0.265

110 1.543 1.170 0.981 0.762 0.625 0.501 0.404 0.296

115 1.581 1.205 1.026 0.801 0.661 0.536 0.436 0.327

120 1.618 1.239 1.058 0.841 0.697 0.572 0.469 0.358

125 1.656 1.274 1.091 0.880 0.733 0.607 0.502 0.389

130 1.694 1.309 1.123 0.920 0.769 0.642 0.534 0.421

135 1.732 1.343 1.155 0.960 0.805 0.677 0.567 0.452

140 1.769 1.378 1.188 0.999 0.841 0.712 0.600 0.483

145 1.807 1.413 1.220 1.035 0.877 0.748 0.632 0.514

150 1.845 1.448 1.253 1.069 0.914 0.783 0.665 0.545

155 1.883 1.482 1.285 1.102 0.950 0.818 0.698 0.576

160 1.920 1.517 1.317 1.135 0.986 0.853 0.730 0.607

165 1.958 1.552 1.350 1.169 1.021 0.888 0.763 0.638

170 1.996 1.586 1.382 1.202 1.056 0.924 0.796 0.670

175 2.033 1.621 1.414 1.235 1.090 0.959 0.828 0.701

180 2.071 1.656 1.447 1.268 1.125 0.994 0.861 0.732

185 2.109 1.691 1.479 1.302 1.159 1.029 0.894 0.763

190 2.147 1.725 1.511 1.335 1.194 1.064 0.926 0.794

195 2.184 1.760 1.544 1.368 1.228 1.098 0.959 0.825

200 2.222 1.795 1.576 1.402 1.263 1.133 0.992 0.856

205 2.260 1.829 1.609 1.435 1.297 1.168 1.025 0.887

210 2.298 1.864 1.641 1.468 1.331 1.203 1.060 0.918

BF1305MTA-A Rev1.0 Page A2-5 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

215 2.335 1.899 1.673 1.502 1.366 1.237 1.094 0.950

220 2.373 1.933 1.706 1.535 1.400 1.272 1.129 0.981

225 2.411 1.968 1.738 1.568 1.435 1.307 1.164 1.012

230 2.449 2.003 1.770 1.601 1.469 1.342 1.199 1.046

235 2.507 2.038 1.803 1.635 1.504 1.376 1.234 1.080

240 2.582 2.072 1.835 1.668 1.538 1.411 1.269 1.114

245 2.657 2.107 1.867 1.701 1.572 1.446 1.304 1.149

250 2.733 2.142 1.900 1.735 1.607 1.481 1.339 1.183

255 2.808 2.176 1.932 1.768 1.641 1.515 1.373 1.218

260 2.883 2.211 1.964 1.801 1.676 1.550 1.408 1.252

265 2.959 2.246 1.997 1.834 1.710 1.585 1.443 1.287

270 3.034 2.281 2.029 1.868 1.745 1.620 1.478 1.321

275 3.109 2.315 2.062 1.901 1.779 1.654 1.513 1.356

280 3.184 2.350 2.094 1.934 1.814 1.689 1.548 1.390

285 3.260 2.385 2.126 1.968 1.848 1.724 1.583 1.425

290 3.335 2.419 2.159 2.001 1.882 1.759 1.617 1.459

295 3.410 2.454 2.191 2.034 1.917 1.793 1.652 1.494

300 3.486 2.509 2.223 2.067 1.951 1.828 1.687 1.528

305 3.556 2.575 2.256 2.101 1.986 1.863 1.722 1.562

310 3.626 2.640 2.288 2.134 2.020 1.898 1.757 1.597

315 3.696 2.706 2.320 2.167 2.055 1.932 1.792 1.631

320 3.766 2.771 2.353 2.201 2.089 1.967 1.827 1.666

325 3.836 2.837 2.385 2.234 2.124 2.002 1.861 1.700

330 3.907 2.902 2.418 2.267 2.158 2.037 1.896 1.735

BF1305MTA-A Rev1.0 Page A2-6 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

335 3.977 2.968 2.450 2.301 2.192 2.071 1.931 1.769

340 4.047 3.034 2.509 2.334 2.227 2.106 1.966 1.804

345 4.117 3.099 2.593 2.367 2.261 2.141 2.001 1.838

350 4.187 3.165 2.677 2.400 2.296 2.176 2.036 1.873

355 4.257 3.230 2.761 2.434 2.330 2.210 2.071 1.907

360 4.327 3.296 2.845 2.469 2.365 2.245 2.105 1.941

365 4.397 3.361 2.929 2.553 2.399 2.280 2.140 1.976

370 4.479 3.427 3.013 2.637 2.434 2.314 2.175 2.010

375 4.592 3.492 3.097 2.721 2.471 2.349 2.210 2.045

Table 3 Required thickness (mm) of Steelguard 651 for a fire resistance period of 90 minutes

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

70 2.314 1.827 1.471 1.087 0.918 0.814 0.690 0.556

75 2.463 1.907 1.534 1.189 1.015 0.885 0.755 0.616

80 2.612 1.987 1.597 1.290 1.111 0.955 0.820 0.676

85 2.760 2.067 1.659 1.392 1.208 1.028 0.885 0.736

90 2.909 2.146 1.722 1.493 1.305 1.119 0.950 0.795

95 3.058 2.226 1.784 1.595 1.402 1.210 1.015 0.855

100 3.207 2.306 1.847 1.697 1.499 1.302 1.097 0.915

105 3.355 2.386 1.910 1.798 1.595 1.393 1.180 0.975

110 3.500 2.466 1.972 1.900 1.692 1.484 1.264 1.031

115 3.602 2.630 2.035 2.001 1.789 1.575 1.347 1.077

120 3.704 2.794 2.103 2.103 1.886 1.667 1.430 1.122

BF1305MTA-A Rev1.0 Page A2-7 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

125 3.805 2.957 2.204 2.204 1.982 1.758 1.514 1.168

130 3.907 3.121 2.306 2.306 2.079 1.849 1.597 1.214

135 4.009 3.285 2.408 2.408 2.176 1.940 1.680 1.259

140 4.111 3.449 2.509 2.509 2.273 2.032 1.763 1.305

145 4.212 3.546 2.611 2.611 2.370 2.123 1.847 1.351

150 4.314 3.620 2.712 2.712 2.466 2.214 1.930 1.396

155 4.416 3.693 2.814 2.814 2.563 2.305 2.013 1.442

160 4.515 3.767 3.087 2.916 2.660 2.397 2.097 1.488

165 4.614 3.840 3.379 3.017 2.757 2.488 2.180 1.533

170 4.713 3.913 3.532 3.119 2.853 2.579 2.263 1.579

175 4.812 3.987 3.598 3.220 2.950 2.671 2.346 1.625

180 4.910 4.060 3.663 3.322 3.047 2.762 2.430 1.670

185 5.009 4.133 3.728 3.423 3.144 2.853 2.513 1.716

190 5.108 4.207 3.794 3.512 3.240 2.944 2.596 1.762

195 5.207 4.280 3.859 3.574 3.337 3.036 2.679 1.807

200 5.305 4.353 3.925 3.636 3.434 3.127 2.763 1.853

205 5.404 4.427 3.990 3.698 3.517 3.218 2.846 1.899

210 5.500 4.509 4.056 3.760 3.580 3.309 2.929 1.944

215 5.557 4.595 4.121 3.822 3.642 3.401 3.013 1.990

220 5.614 4.681 4.186 3.883 3.705 3.492 3.096 2.036

225 5.670 4.768 4.252 3.945 3.768 3.557 3.179 2.081

230 5.727 4.854 4.317 4.007 3.830 3.622 3.262 2.127

235 5.784 4.940 4.383 4.069 3.893 3.687 3.346 2.173

240 5.841 5.026 4.448 4.131 3.955 3.753 3.429 2.218

BF1305MTA-A Rev1.0 Page A2-8 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

245 5.898 5.112 4.524 4.193 4.018 3.818 3.510 2.264

250 5.954 5.198 4.599 4.255 4.080 3.883 3.584 2.310

255 6.011 5.284 4.674 4.317 4.143 3.948 3.658 2.355

260 6.068 5.370 4.750 4.378 4.206 4.013 3.732 2.401

265 6.125 5.456 4.825 4.440 4.268 4.078 3.806 2.447

270 6.182 5.534 4.901 4.513 4.331 4.144 3.880 2.806

275 6.238 5.604 4.976 4.587 4.393 4.209 3.954 3.389

280 6.295 5.674 5.051 4.662 4.458 4.274 4.028 3.568

285 6.352 5.744 5.127 4.736 4.540 4.339 4.102 3.660

290 6.409 5.814 5.202 4.810 4.621 4.404 4.176 3.753

295 6.466 5.884 5.278 4.884 4.703 4.479 4.250 3.845

300 6.522 5.954 5.353 4.959 4.784 4.573 4.324 3.937

305 6.579 6.024 5.428 5.033 4.865 4.668 4.398 4.029

310 6.636 6.094 5.506 5.107 4.947 4.762 4.485 4.121

315 6.693 6.164 5.602 5.181 5.028 4.856 4.596 4.213

320 6.750 6.234 5.699 5.255 5.110 4.951 4.706 4.306

325 6.806 6.305 5.795 5.330 5.191 5.045 4.817 4.398

330 6.863 6.375 5.892 5.404 5.272 5.140 4.928 4.513

335 6.920 6.445 5.989 5.478 5.354 5.234 5.039 4.655

340 6.977 6.515 6.085 5.589 5.435 5.328 5.150 4.797

345 7.034 6.585 6.182 5.712 5.529 5.423 5.261 4.938

350 7.090 6.655 6.278 5.835 5.659 5.525 5.371 5.080

355 7.147 6.725 6.375 5.958 5.789 5.652 5.482 5.222

360 7.204 6.795 6.471 6.080 5.919 5.780 5.605 5.364

BF1305MTA-A Rev1.0 Page A2-9 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

365 7.261 6.865 6.568 6.203 6.049 5.908 5.730 5.505

370 7.318 6.935 6.664 6.326 6.179 6.036 5.855 5.623

375 7.374 7.005 6.761 6.449 6.309 6.163 5.979 5.741

Table 4 Required thickness (mm) of Steelguard 651 for a fire resistance period of 120 minutes

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

70 3.511 2.810 2.390 2.080 1.847 1.628 1.413 1.070

75 3.808 3.013 2.569 2.193 1.950 1.722 1.499 1.154

80 4.105 3.216 2.747 2.306 2.053 1.815 1.584 1.238

85 4.403 3.419 2.925 2.419 2.156 1.909 1.669 1.322

90 4.521 3.623 3.103 2.579 2.259 2.002 1.754 1.405

95 4.607 3.826 3.281 2.773 2.362 2.096 1.839 1.489

100 4.693 4.029 3.460 2.967 2.465 2.189 1.924 1.573

105 4.780 4.232 3.608 3.162 2.689 2.283 2.009 1.657

110 4.866 4.435 3.750 3.356 2.915 2.376 2.094 1.740

115 4.952 4.524 3.892 3.523 3.140 2.478 2.179 1.824

120 5.039 4.606 4.034 3.627 3.366 2.766 2.264 1.908

125 5.125 4.688 4.175 3.730 3.536 3.054 2.350 1.992

130 5.211 4.770 4.317 3.834 3.637 3.342 2.435 2.076

135 5.297 4.852 4.455 3.938 3.737 3.540 2.753 2.159

140 5.384 4.933 4.548 4.041 3.838 3.640 3.206 2.243

145 5.470 5.015 4.640 4.145 3.938 3.740 3.529 2.327

150 5.663 5.097 4.733 4.249 4.038 3.839 3.630 2.411

BF1305MTA-A Rev1.0 Page A2-10 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

155 5.902 5.179 4.826 4.352 4.139 3.939 3.731 3.152

160 6.142 5.261 4.919 4.457 4.239 4.039 3.833 3.580

165 6.382 5.343 5.011 4.575 4.339 4.139 3.934 3.685

170 6.621 5.424 5.104 4.694 4.440 4.238 4.035 3.791

175 6.861 5.517 5.197 4.812 4.567 4.338 4.136 3.896

180 7.100 5.690 5.289 4.931 4.696 4.438 4.237 4.002

185 7.340 5.864 5.382 5.049 4.826 4.573 4.338 4.107

190 7.580 6.037 5.475 5.168 4.956 4.712 4.439 4.213

195 - 6.210 5.599 5.286 5.085 4.851 4.571 4.318

200 - 6.383 5.734 5.405 5.215 4.991 4.707 4.424

205 - 6.556 5.869 5.524 5.345 5.130 4.843 4.546

210 - 6.730 6.003 5.643 5.474 5.269 4.979 4.673

215 - 6.903 6.138 5.763 5.599 5.408 5.115 4.801

220 - 7.076 6.273 5.883 5.723 5.549 5.250 4.928

225 - 7.249 6.407 6.002 5.847 5.693 5.386 5.055

230 - 7.422 6.542 6.122 5.970 5.836 5.530 5.182

235 - 7.596 6.677 6.241 6.094 5.980 5.711 5.309

240 - - 6.811 6.361 6.218 6.123 5.891 5.436

245 - - 6.946 6.481 6.342 6.267 6.072 5.616

250 - - 7.081 6.600 6.465 6.410 6.253 5.843

255 - - 7.215 6.720 6.589 6.554 6.433 6.071

260 - - 7.350 6.840 6.713 6.697 6.614 6.298

265 - - 7.485 6.959 6.841 6.841 6.795 6.525

270 - - 7.619 7.079 6.985 6.985 6.975 6.752

BF1305MTA-A Rev1.0 Page A2-11 of 12 ©BRE Global Ltd. 2019

 LPCB Ref. Number 1192m/01

Design temperature (°C)

Section factor
(m-1)
350 400 450 500 550 600 650 700

275 - - - 7.199 7.156 7.156 7.156 6.979

280 - - - 7.336 7.336 7.336 7.336 7.207

285 - - - 7.517 7.517 7.517 7.517 7.434

290 - - - - - - - -

295 - - - - - - - -

300 - - - - - - - -

305 - - - - - - - -

310 - - - - - - - -

315 - - - - - - - -

320 - - - - - - - -

325 - - - - - - - -

330 - - - - - - - -

335 - - - - - - - -

340 - - - - - - - -

345 - - - - - - - -

350 - - - - - - - -

355 - - - - - - - -

360 - - - - - - - -

365 - - - - - - - -

370 - - - - - - - -

375 - - - - - - - -

BF1305MTA-A Rev1.0 Page A2-12 of 12 ©BRE Global Ltd. 2019