Scribd
Upload
163 views9 pages

Cisco Ise Installation and Integration With AD

This document provides a lab guide for installing Cisco ISE and integrating it with Active Directory. It outlines setting up a Windows Server 2016/2019 machine as an Active Directory, DNS, and NTP server on VMware ESXi. It then describes powering on the Cisco ISE virtual machine, running the setup wizard, and configuring ISE to join the Active Directory domain. The goal is to establish user authentication and authorization between ISE and Active Directory.

Uploaded by

Freeda Candle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
163 views9 pages

Cisco Ise Installation and Integration With AD

This document provides a lab guide for installing Cisco ISE and integrating it with Active Directory. It outlines setting up a Windows Server 2016/2019 machine as an Active Directory, DNS, and NTP server on VMware ESXi. It then describes powering on the Cisco ISE virtual machine, running the setup wizard, and configuring ISE to join the Active Directory domain. The goal is to establish user authentication and authorization between ISE and Active Directory.

Uploaded by

Freeda Candle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Cisco ISE Installation

Active Directory Integration


Lab Guide
Version 1.0

Released 21-Feb-2023

www.itbase.tv
Resources
Hypervisor VMware ESXI 6.5 (Workstation is fine)

Simulator EVE-NG Community version (pnetlab is fine)

Virtual images ise-2.7


windows server 2016
cisco IOL L2
cisco C1900
Juniper vSRX

Topology

Cisco ISE 10.200.1.101

AD/DNS/NTP 10.200.1.102

2 |Page
I. Setup AD/DNS/NTP Server on Windows server 2016/2019
In order to achieve Cisco ISE and Active Directory Integration, let’s establish the AD/DNS/NTP.

Setting up server IP Address

Installing DNS and Active Directory Services

3 |Page
Create your domain

Confirm the Active Directory and DNS Services are installed properly.

4 |Page
Setting Windows Server as NTP server

Restart NTP services.


Services: Windows Time

5 |Page
II. Setup Cisco ISE

Power On and Enter "setup" to start the installation process.

Enter the basic parameters


Hostname: ise01
IP address: 10.200.1.101
IP netmask: 255.255.255.0
Default GW: 10.200.1.254
DNS domain: itbase.local
Nameserver: 10.200.1.102
NTP server: 10.200.1.102
Enter your admin password.
Wait for around 15 minutes to complete the setup

6 |Page
Access ISE via Web Browser
https://10.200.1.101

7 |Page
III. Integrate Cisco ISE with Active Directory

Add AD domain

Administration > External Identity Sources > Active Directory > Add

Submit Joined domain (which is created above)

8 |Page
Enter AD Domain Admin credential to join ISE to Domain.

Confirm successfully status

9 |Page

You might also like