04 Medidores Elster A1100

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

A1100

Electronic Polyphase Meter

Advanced, cost-effective polyphase metering...


Features The use of innovative metering technology provides
• Accuracy Class 1 or Class 2 cost-effective metering that is highly secure and
• kWh import or kWh import/export maintains a high degree of accuracy over its full
• 3 phase, 4 wire or 3 phase, 3 wire operating range. The A1100 meter is suitable for
• 16 year product life CT or direct connected, domestic, commercial and
• Large figure display light industrial polyphase applications.
• Extensive security data Two main versions of the A1100 meter are available.
• IrDA (Infrared Data Association) output The liquid crystal display version of the meter can be
for transmitting billing, security and status supplied as a one or two rate meter. The meter is
data available as import only or import and export.
• 12kV impulse withstand The display has a customer defined display sequence
• Compact design that can include security information. Chevrons and
• Double insulated, glass filled polycarbonate legends on the nameplate identify the data being
case to DIN 43857 Part 2 and Part 4 (except displayed.
for top fixing centres) The mechanical register version of the meter is
• IP53 in accordance with IEC 60529:1989 available for kWh import one rate applications only.
Five LED's are used to identify the status of the meter.
Options Communications are provided via the IrDA port
• Liquid Crystal Display or mechanical stepper allowing the meter registers and security data to be
register read electronically using a hand-held device.
• One or two rates controlled by an external This greatly reduces the possibility of manual meter
device (LCD meter only) reading errors. As an option the same absolute data
• Auxiliary terminals configured for rate as the IrDA port, or a pulsed output, can be
selection (two rate meters), pulsing output transmitted via the meter’s auxiliary terminals.
or serial data output Meters can be supplied to meet accuracy Class 1
• SO pulsed output (IEC 62053-31) or Class 2 requirements. They are approved to
• Extended terminal cover with or without EN 61036:1996 plus Amendment 1 2000 and have
cut-out an ingress protection of IP53 to IEC 60529:1989.
• CT or direct connected
Display IrDA Communications
The IrDA (Infrared Data Association)
communications port provides
one way communications,
transmitting a continual data
stream from the meter to an
external device. An error
checking algorithm protects
the integrity of the data. As an
The LCD version of the A1100 displays register option the same absolute data
and security information by the use of chevrons is available via the meter’s auxiliary terminals.
and digits. The mechanical register version has The port uses the OBIS: IEC 62056-61 data
five LED's for reporting status information. identifiers.
Meter nameplates can be printed in any Important information is provided:
language. Meter registers Security features
Status information Identification
The port transmits over a distance of 250mm.
Security
The A1100 offers high security with many useful
security features. The meter stores all registration
and configuration data to non-volatile memory. Technical Data
All data is retained for the life of the meter.
Recordable security features are illustrated below. Current Range 10-100A, 5-85A (direct), 5A-10A (CT)
Voltage Range 220-240V (L-N) or 220-240V (L-L)
LCD Meter Security Features Stepper Meter
Frequency 50 Hz
Burden
Display Time in each rate
Display Elapsed time Voltage Circuits (230V) 0.9W, 9VA capacitive burden/phase [max]
Chevron Reverse run LED Current Circuits 2VA @ 100A/phase [max]
Display Reverse run count
Display Reverse run energy Insulation 4kV RMS 50Hz
Display Supply fail count Impulse Withstand 12kV 1.2/50µs 500ohm source
3 x Chevrons 3 x phase failure indication 3 x LEDs
Display Phase fail counter Display LCD 9.8 x 3.5mm characters
Display Meter errors LED High contrast, wide angle
IrDA port
Stepper Motor 6.7 x 3.5mm characters
IrDA port
IrDA data IrDA Baud Rates 2400, 4800 or 9600 (Without serial port)
Aux terminals Aux terminals
Serial Baud Rates 2400 or 4800
Product Life 16 years
As an option the kWh register can increment in Certified Product Life 10 years
power flow insensitive mode i.e. it increments Temperature -40o to + 55o C (Operational range)
regardless of energy flow direction. -40o to + 85o C (Storage)
Humidity Annual mean 75% (For 30 days spread

Pulse Output
over one year, 95%)
Pulse Width 10 to 250ms or equal mark/space
An opto-isolated pulse output can provide the Wh/pulse 1, 2, 4, 5, 10, 20, 25, 40, 50, 100
basis for an energy management system or AMR. Weight 860 grams
These pulses are output via the meter’s auxiliary Specifications kWh Class 1 or 2
terminals. The output conforms to IEC 61036:1996 (plus Amendment 1:2000)
IEC 62053-31. Case IP53 to IEC 60529:1989

System Connections
Dimensions and Fixing Centres
2 Element 3 phase 3 wire

3 Element 3 phase 4 wire


2 phases of a 3 phase 4 wire
2 phase 3 wire
1 phase 3 wire
1 phase 2 wire (LCD meter only)

Elster Metering Systems Our policy is one of continuous product development and the right is reserved
Staffordshire, to modify the specification contained herein without notice.
United Kingdom
Tel: 44 (0) 1785 812111
www.elstermetering.com EMS/A1100/2.2004

You might also like