Scribd
Upload
19 views

Tutorial 4 Problems

This document contains 6 thermodynamics questions and their answers from Tutorial 4 of the IIT Kanpur course ESO 201A: Thermodynamics. The questions cover topics like open systems reaching thermal equilibrium, properties of refrigerants, ideal gas behavior, the van der Waals equation, polytropic processes, and heating of a two-phase refrigerant.

Uploaded by

Bhavishya Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
19 views

Tutorial 4 Problems

This document contains 6 thermodynamics questions and their answers from Tutorial 4 of the IIT Kanpur course ESO 201A: Thermodynamics. The questions cover topics like open systems reaching thermal equilibrium, properties of refrigerants, ideal gas behavior, the van der Waals equation, polytropic processes, and heating of a two-phase refrigerant.

Uploaded by

Bhavishya Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INDIAN INSTITUTE OF TECHNOLOGY KANPUR

ESO 201A: Thermodynamics


(2023-24 I Semester)
Instructor: Dr Avinash Kumar Agarwal

Tutorial 4
---------------------------------------------------------------------------------------------------------------------------

Question 1: A 1-m3 tank containing air at 10°C and 350 kPa is connected through a valve
to another tank containing 3 kg of air at 35°C and 150 kPa. Now the valve is opened, and
the entire system is allowed to reach thermal equilibrium with the surroundings, which
are at 20°C. Determine the volume of the second tank and the final equilibrium pressure
of air. (Ans. 1.768 m3, 222 kPa)
Question 2: Determine the specific volume of refrigerant-134a vapor at 0.9 MPa and 70°C
based on (a) the ideal-gas equation, (b) the generalized compressibility chart, and (c) data
from tables.

(Ans. (a) 0.03105 m3/kg (b)0.02776 m3/kg (c)0.027413 m3/kg)


Question 3: A 3.27-m3 tank contains 100 kg of nitrogen at 175 K. Determine the pressure
in the tank using (a) the ideal-gas equation, (b) the van der Waals equation, and (c) the
Beattie- Bridgeman equation. Compare your results with the actual value of 1505 kPa.

(Ans. (a) 1588 kPa, (b) 1495 kPa, (c) 1504 kPa)
Question 4: Calculate the total work, in kJ, for process 1–3 shown in Fig. 1 when the
system consists of 2 kg of nitrogen.

Fig. 1
(Ans. 300 kJ)
Question 5: A piston–cylinder device contains 0.15 kg of air initially at 2 MPa and 350°C.
The air is first expanded isothermally to 500 kPa, then compressed polytropically with a
polytropic exponent of 1.2 to the initial pressure, and finally compressed at the constant
pressure to the initial state. Determine the boundary work for each process and the net
work of the cycle.

(Ans. 37.18 kJ, -34.86 kJ, -6.97 kJ, -4.65 kJ)


Question 6: A 0.5-m3 rigid tank contains refrigerant-134a initially at 160 kPa and 40
percent quality. Heat is now transferred to the refrigerant until the pressure reaches 700
kPa. Determine (a) the mass of the refrigerant in the tank and (b) the amount of heat
transferred. Also, show the process on a P-v diagram with respect to saturation lines.

(Ans. 10.03 kg, 2708 kJ

You might also like