Scribd
Upload
281 views2 pages

Welded Wire Mesh Data Sheet 20210601

Welded wire mesh is constructed by welding rigid wires at every intersection to form a stable surface that retains its shape without supports. This allows it to be easily shaped, rolled, and framed. It is available in stainless, plain, or galvanized steel in widths up to 10 feet and lengths from 20-100 feet. Common uses include animal control, construction, guarding, HVAC, mining, and screening. Specifications include mesh count, wire diameter, opening size, weight, and edge type.

Uploaded by

seddeik14 seddeik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
281 views2 pages

Welded Wire Mesh Data Sheet 20210601

Welded wire mesh is constructed by welding rigid wires at every intersection to form a stable surface that retains its shape without supports. This allows it to be easily shaped, rolled, and framed. It is available in stainless, plain, or galvanized steel in widths up to 10 feet and lengths from 20-100 feet. Common uses include animal control, construction, guarding, HVAC, mining, and screening. Specifications include mesh count, wire diameter, opening size, weight, and edge type.

Uploaded by

seddeik14 seddeik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Welded Wire Mesh

Wire Diameters and Specifications

Fraction Decimal
of Inch of Inch Millimeters

Welded wire mesh is constructed from rigid wires welded at every


intersection to provide a very stable and uniform surface. By welding
rather than weaving, the material holds its shape well without supports,
allowing shearing, rolling, and framing to be done with relative ease.
Welded mesh is available in stainless, plain, and pre-galvanized steel with
specific finishes on request. It is available in widths of up to 10 ft and
lengths from 20 ft to 100+ ft, depending on the mesh being requested.
Here are some major customer uses:
• Animal Control
• Automotive / Transport
• Construction
• Decorative
• Guarding (Machine, Window, Fencing, etc.)
• HVAC
• Mining
• Processing / Packaging (e.g. conveyer)
• Screening / Separation

Size of Opening Edge Requirements

Measured Measured Random Tails Equal Tails Flush Edges


center-to-center inside-to-inside • Easiest (least • Custom welded • Material has to be
of wire of opening expensive) to shear. mesh is often made oversized, then
• Fewer cuts to get with equal tails to sheared down.
product to reduce cost. • Scrap and extra
finished size. • No need to re-size. processes increase
the price.
• Less likely to be
damaged in shipping.

www.gerarddaniel.com | 800.232.3332 | [email protected]


Mesh Count Wire Diameter Opening Width Open Weight, Stainless Steel
or Center-to- Area
Center inches mm inches mm % Lbs/sq. ft. Kg/m2
4x4 0.028 0.711 0.222 5.639 78.9% 0.202 0.986
3x3 0.047 1.194 0.286 7.264 73.6% 0.428 2.090
2x2 0.047 1.194 0.453 11.51 82.1% 0.284 1.387
2x2 0.063 1.600 0.437 11.10 76.4% 0.507 2.475
1/2” x 1” c.c. 0.063 1.600 0.437 11.10 81.9% 0.380 1.855
1” x 1” c.c. 0.063 1.600 0.937 23.80 87.8% 0.263 1.284
1” x 1” c.c. 0.078 1.981 0.920 23.37 84.6% 0.400 1.953
1” x 1” c.c. 0.080 2.032 0.920 23.37 84.6% 0.416 2.031
1” x 1” c.c. 0.125 3.175 0.875 22.23 76.6% 1.016 4.961
1” x 1” c.c. 0.135 3.429 0.865 21.97 74.8% 1.185 5.786
1- /2” x 1- /2” c.c.
1 1
0.135 3.429 1.365 34.67 82.8% 0.796 3.886
2” x 1” c.c. 0.125 3.175 1.875 47.63 82.0% 0.766 3.740
2” x 1” c.c. 0.135 3.429 1.865 47.37 80.7% 0.893 4.360
2” x 2” c.c. 0.109 2.769 1.895 48.13 89.8% 0.392 1.914
2” x 2” c.c. 0.135 3.429 1.865 47.37 87.0% 0.602 2.939
2” x 2” c.c. 0.080 2.032 1.920 48.77 70.6% 0.211 1.030
2” x 2” c.c. 0.125 3.175 1.875 47.63 87.9% 0.516 2.519
2” x 2” c.c. 0.1875 4.763 1.813 46.04 82.1% 1.154 5.634
2” x 2” c.c. 0.250 6.350 1.750 44.45 76.6% 2.063 10.072
3" x 3" c.c. 0.1875 4.763 2.813 71.45 87.9% 0.781 3.813
3" x 3" c.c. 0.250 6.350 2.750 69.85 84.0% 1.396 6.816
4" x 2" c.c. 0.250 6.350 3.750 95.25 82.0% 1.563 7.631
4" x 4" c.c. 0.1875 4.763 3.813 96.84 90.8% 0.595 2.905
4" x 4" c.c. 0.250 6.350 3.750 95.25 87.9% 1.063 5.190

Nominal weights are similar for stainless steel, plain steel and galvanized steel.

www.gerarddaniel.com | 800.232.3332 | [email protected]

You might also like