This alarm is raised if the configuration data stored in the RBS does not match the product data stored internally in the cabinet. This can occur if the SCU is moved from another RBS, since the product data stored in the SCU may not match the original RBS. The alarm indicates there is a risk the RBS may not be working correctly. To resolve the issue, the product ID values stated on the cabinet label should be added to the RBS description in the configuration.
This alarm is raised if the configuration data stored in the RBS does not match the product data stored internally in the cabinet. This can occur if the SCU is moved from another RBS, since the product data stored in the SCU may not match the original RBS. The alarm indicates there is a risk the RBS may not be working correctly. To resolve the issue, the product ID values stated on the cabinet label should be added to the RBS description in the configuration.
This alarm is raised if the configuration data stored in the RBS does not match the product data stored internally in the cabinet. This can occur if the SCU is moved from another RBS, since the product data stored in the SCU may not match the original RBS. The alarm indicates there is a risk the RBS may not be working correctly. To resolve the issue, the product ID values stated on the cabinet label should be added to the RBS description in the configuration.
This alarm is raised if the configuration data stored in the RBS does not match the product data stored internally in the cabinet. This can occur if the SCU is moved from another RBS, since the product data stored in the SCU may not match the original RBS. The alarm indicates there is a risk the RBS may not be working correctly. To resolve the issue, the product ID values stated on the cabinet label should be added to the RBS description in the configuration.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 6
RBS6601/6201 CF 2A-69
SO CF I2A:69 - Cabinet Product Data Mismatch
Description The ability to keep a consistent product data view is lost and there is a mismatch between configured data and unit-provided data. This alarm is raised if the configuration data does not match the cabinet product data, stored internally in the RBS (in the SCU/SUP). The alarm is raised if the SCU is moved from another RBS to this RBS, because the product data, stored in the SCU/SUP, does not match the original data stored in the DU. Correct cabinet product data (PID) is not available for this RBS. There is a risk that the RBS is not working correctly. Action Follow the instructions below until the fault is resolved. Add the values stated on the cabinet enclosure label to the IDB description. If all the information enter correctly the alarm will cease.
RBS6201 . OMT---Configuration--- Hardware Info
Hardware Info select RBS6201 0 Run
Define RBS6201 0 HW Info
RBS6201 hardware information is on the bottom of the cabinet
