Guide For MEWP

Guide for Safe Use
of Mobile Elevating
Work Platforms
Introduction Background
Mobile Elevated Work Platforms (MEWPs) are mobile machines with an MEWPs are a safer option to reach working positions at height. Safe use of MEWPs
extendable work platform intended to raise personnel to perform works is important to protect the operator’s safety and other workers around him.
at height. Boom lifts and scissor lifts are common types of MEWPs.
However, accidents can happen. Several MEWP common hazards that have led to
This guide aims to share good MEWP-related practices in the following serious injuries or deaths include (but are not limited to):
categories:
• Entrapment—when the operator was trapped between part of the
basket and fixed structures (e.g. overhead steel beams)
i) Before using the MEWP • Overturning—when the MEWP toppled and the operator was thrown
ii) When using the MEWP out of the basket
iii) After using the MEWP
• Falling from height—when the operator fell from the work platform
while climbing on the toe boards, midrails or guardrails of the MEWP

• Collision with pedestrians, overhead cables, or nearby vehicles
• “Catapult-effect” when using boom-type MEWP
Do not make any modifications or additions to the MEWP that may affect
its operation, stability, safety factors, rated load, or structural integrity of
the MEWP without the manufacturer and/or supplier prior approval.
When planning work involving an MEWP, it is important to follow the stages:
• Identify the task to be undertaken;

• Identify the location and timing of MEWP usage;
• Select an appropriate MEWP;
• Identify hazards and risks associated with the use of a specific MEWP;
• Identify the hazards associated with the task;
• Identify control measures;
• Develop the safe work procedures (SWPs) and fall prevention plan (FPP);
• Develop the emergency plan for rescue from height;
• Communicate the plans (e.g. SWP, FPP, emergency plan) to all persons involved;
• Review the plans prior to and during the operation; and
• Incorporate any changes.
Before using an MEWP
A site survey should be conducted Ensure MEWP has a clear path of travel.
by a competent person to assess
the site conditions and select an
appropriate MEWP for the intended
task, taking into consideration
other factors such as ground and
weather conditions.
Guidelines
Perform pre-use inspection in accordance with

manufacturer’s guidelines before operation.
Do not operate MEWPs if operator is Do not use the MEWP if any defects are found.
on medication or feeling unwell. ISOLATE, TAG and REPORT the machine as defective.
Cordon off work area to ensure persons

Operators must be trained, and equipment are clear of the area in
familiarised and authorised before the proximity of the MEWP. Ensure
operating any MEWP. warning signs are clearly displayed.
CAUTION
When using an MEWP
Anchor harness to the designated
anchor point using a short lanyard.
Maintain firm footing when

working on MEWPs.
Ensure that ground conditions are suitable

as required by the specific MEWPs. Do
not operate MEWPs on slopes beyond
manufacturer’s specifications.
Maintain a safe distance from overhead obstacles. Anti-entrapment
devices can help raise awareness of overhead obstacles.
MEWPs are not meant for access.

Do not exit an MEWP at height.
Do not exceed the Safe Working Load and

maximum Number of Occupants of the
platform specified by the manufacturer.
After using an MEWP
Park and store MEWP at

the designated area
Remove the ignition key to

prevent unauthorised access.
Published in July 2022 by the Workplace Safety and Health Council in
collaboration with the Ministry of Manpower, National Work at Heights
Safety Taskforce, and International Powered Access Federation
This guide may not be reproduced without prior permission.

The Workplace Safety and Health Council does not accept
any liability or responsibility to any party for losses or damage
arising from following this guide.
More information at www.wshc.sg or email [email protected]

Guide For MEWP

Uploaded by

Copyright:

Available Formats

Guide For MEWP

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Guide For MEWP

Uploaded by

Copyright:

Available Formats

Guide for Safe Use

while climbing on the toe boards, midrails or guardrails of the MEWP

• “Catapult-effect” when using boom-type MEWP

When planning work involving an MEWP, it is important to follow the stages:

• Identify the task to be undertaken;

Perform pre-use inspection in accordance with

Cordon off work area to ensure persons

Maintain firm footing when

Ensure that ground conditions are suitable

MEWPs are not meant for access.

Do not exceed the Safe Working Load and

Park and store MEWP at

Remove the ignition key to

This guide may not be reproduced without prior permission.

More information at www.wshc.sg or email [email protected]

You might also like