250

125 125

500 500
1000
40 920 40
-1F 40 920 40
2 10DB12@100 -1F
-1.50 m
870 -1.50 m
900

40
2 10DB12@100

13 2DB16

500

500

490

490
4 3RB8@200
14 6RB8@150
900

820
900
4 3RB8@200

490

490
500

500
5 10DB14@100

40
6 10DB14@100 870
900
1000
5 10DB14@100
SECTION (1-1)
SCALE: 1 : 10

SECTION (2-2)
SCALE: 1 : 10
A 4

SCHEDULE PC01
2 10DB12@100
Position Bar Diameter Bar Length(mm) Quantity MASS(kg) Bending Detail
2 12 1834.25 10 16.25 kg

490 mm

490 mm
900 mm
PROJECT:
3 12 1826.46 10 16.25 kg
DOMITORY

500 mm

500 mm
870 mm
4 8 4708.50 3 5.58 kg 920 mm

mm

mm
920100mm

920100mm
4 3RB8@200 920 mm
5 14 1794.80 10 21.63 kg

490 mm

490 mm
870 mm
6 14 1852.65 10 22.36 kg

500 mm

500 mm
900 mm
12 16 3109.91 1 4.91 kg 2980 mm

160 mm
5 10DB14@100 5 10DB14@100
13 16 <varies> <varies> 24.86 kg 2980 mm

REFERENCE DRAWINGS

200 mm
14 8 1258.50 6 5.97 kg 100 mm
320 mm DRAWN BY SAN RAKSA

170 mm

170 mm
100 mm
320 mm DESIGN BY PROF. CHHANG SOPHY
Grand total: 11 117.79 kg
CHECKED BY PROF. CHHANG SOPHY
LEGENDS
APPROVED BY PROF. CHHANG SOPHY
- PILE(D=40MM, L=6000MM), DESIGN FORCE: XX TON NOTE
- COMPRESSIVE FORCE PMAX = XXX T, PMIN = XXX T 1. ALL DIMENSION ARE IN MILLIMETERS EXCEPT INDICATED. SHEET NAME:
- AFTER HAVING TEST PILE RESULT, DESIGN CONSULTANT 2. ALL LEVELS ARE IN METERS EXCEPT INDICATED.
WILL HAVE CONCLUSION ABOUT LENGTH PILE AND PC1 LAYOUT
3. CHARACTERISTIC CYLINDER COMPRESSIVE STRENGTH OF CONCRETE
ALLOWABLE CAPACITY OF PILE. SHALL BE MINIMUM OF 30MPa AT 28 DAYS.
- PILE CUT-OFF LEVEL:DEPENDS ON PILE CAP POSITION 4. REINFORCING STEEL YIELD STRENGTH TO BE A MINIMUM OF:
(REFER TO THE PILE CAP DETAIL DWG). - 390 MPa FOR DEFORMED BAR (DB).
- MASS PILE IS ONLY CONSTRUCTED WHEN HAVE SIZE: A3 DATE: 28.08.2023
- 235 MPa FOR ROUNDED BAR (RB).
ACCEPTANCE WRITTEN OF DESIGN CONSULTANT
SHEET No: 02 TOTAL SHEET /20