Scribd
Upload
153 views

Assignment 02

Uploaded by

Unknowen Number
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views

Assignment 02

Uploaded by

Unknowen Number
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Name: Class: Assignment 2 Date:

Chapter 02 - Safety
1. The safe zone around a robot is ________________.
a. the same as the work envelope
b. the area just outside of the reach of the robot
c. often where the operator works
d. the area where anyone can travel

2. The danger zone around the robot is ___________________.


a. the same as the work envelope for the robot
b. where OSHA requires you to have an E-stop in reach at all times
c. the area where the robot can reach
d. All of these are correct

3. The cautionary zone around the robot is _____________.


a. where you are close to the robot, but out of its reach
b. safe for anyone to travel or work
c. where the operator often works
d. Both a and c are correct

4. Which of the following is the most life-threatening path for electricity to take as it passes through the body?
a. Fingertip to middle of the same hand
b. From the middle of the left hand to the left foot
c. From the middle of the hand to the same shoulder
d. None of these are correct

Copyright Cengage Learning. Powered by Cognero. Page 1


Name: Class: Assignment 2 Date:

Chapter 02 - Safety
DATE MODIFIED: 6/11/2018 9:31 AM

5. Tourniquets _________________.
a. should be used with all bleeding
b. are used as a last resort
c. present no danger to the patient
d. require no special training for use

6. What would be the amperage of a system that is powered by 120 volts and has a resistance of 100 ohms?
a. 1.2 amps
b. 0.5 amp
c. 1 amp
d. 12 amps

7. What is the resistance of a system that is powered by 480 volts and has 60 amps flowing through it?
a. 5.8 ohms
b. 10 ohms
c. 13.5 ohms
d. 8 ohms

8. At _______, muscle contractions and breathing difficulty begin with loss of muscle control possible.
a. 0.010A to 0.030A
b. 0.100A to 0.200A
c. 2.0A to 4.0A
d. None of these are correct

Copyright Cengage Learning. Powered by Cognero. Page 2


Name: Class: Assignment 2 Date:

Chapter 02 - Safety

9. Ventricular fibrillation is highly possible when _______ passes through the heart.
a. 0.001A to 0.003A
b. 0.010A to 0.030A
c. 0.100A to 0.200A
d. None of these are correct

10. What is your internal resistance to electricity once it makes it under your skin and passes from your hand to your foot?
a. 200,000 ohms
b. 400 to 600 ohms
c. 2000 ohms
d. 600,000 ohms

11. Sensors that house an emitter and a receiver separately to create an infrared sensing barrier are known as a _______.
a. limit switch
b. proximity switch
c. light curtain
d. pressure sensor

12. What is a zero-energy state?


a. When there is no active power
b. When the electrical power is turned off
c. When there is no latent power
d. Both a and c are correct

Copyright Cengage Learning. Powered by Cognero. Page 3


Name: Class: Assignment 2 Date:

Chapter 02 - Safety

13. The person who can remove a lock on a lockout device is ____________.
a. the person who put it in place
b. the supervisor once the work is done
c. the supervisor once he or she has spoken with the owner
d. Both a and c are correct

14. The LOTO standard _______________________________.


a. is an OSHA standard that took effect on January 2, 1990
b. prevents approximately 120 fatalities per year
c. is your best protection when working on equipment
d. All of these are correct

15. What are the three Rs of robotics, and what do they mean?

16. List three alarm conditions that will stop the robot if it is running or prevent start up.

17. What events stop the robot when it is performing program tasks?

Copyright Cengage Learning. Powered by Cognero. Page 4


Name: Class: Assignment 2 Date:

Chapter 02 - Safety

18. What factors determine the severity of a shock?

19. What are the steps of the LOTO process, in order they are executed?

20. What are the four general rules of handling emergencies and what is your responsibility for each? Make sure you
support your answers fully.

Copyright Cengage Learning. Powered by Cognero. Page 5

You might also like