KA317

www.fairchildsemi.
com
KA317
3-Terminal Positive Adjustable Regulator
Features Description
• Output Current in Excess of 1.5A This monolithic integrated circuit is an adjustable 3-terminal
• Output Adjustable Between 1.2V and 37V positive voltage regulator designed to supply more than 1.5A
• Internal Thermal Overload Protection of load current with an output voltage adjustable over a 1.2V
• Internal Short Circuit Current Limiting to 37V. It employs internal current limiting, thermal shut
• Output Transistor Safe Area Compensation down and safe area compensation.
• TO-220 Package
TO-220 (Dual Gauge)
Output
1. Adj 2. Output 3. Input
Internal Block Diagram
Vin 3
Input
Voltage Protection
Reference Circuitry
Rlimit
2 Vo
Output
1
Vadj
Rev. 1.0.3
©2011 Fairchild Semiconductor Corporation
KA317
Absolute Maximum Ratings
Parameter Symbol Value Unit

Input-Output Voltage Differential VI - V O 40 V
Lead Temperature TLEAD 230 °C
Power Dissipation PD Internally limited W
Thermal Resistance Junction to Case RθJC 5 °C/W
Operating Junction Temperature Range Tj 0 ~ +125 °C
Storage Temperature Range TSTG -65 ~ +125 °C
Temperature Coefficient of Output Voltage ΔVo/ΔT ±0.02 %/°C
Electrical Characteristics
(VI-VO= 5V, IO= 0.5A, 0°C ≤ TJ ≤ +125°C, IMAX = 1.5A, PDMAX = 20W, unless otherwise specified)
Parameter Symbol Conditions Min. Typ. Max. Unit

TA = +25°C
- 0.01 0.04 %/V
Line Regulation (Note1) Rline 3V ≤ VI - VO ≤ 40V
3V ≤ VI - VO ≤ 40V - 0.02 0.07 %/V
TA = +25°C, 10mA ≤IO ≤ IMAX
VO< 5V - 18 25 mV
VO ≥ 5V - 0.4 0.5 %/VO
Load Regulation (Note1) Rload
10mA ≤ IO ≤ IMAX
VO < 5V - 40 70 mV
VO ≥ 5V - 0.8 1.5 %/VO
Adjustable Pin Current IADJ - - 46 100 μA
3V ≤ VI - VO ≤ 40V
Adjustable Pin Current Change ΔIADJ 10mA ≤ IO ≤ IMAX - 2.0 5 μA
PD ≤ PMAX
3V ≤ VIN - VO ≤ 40V
Reference Voltage VREF 10mA ≤ IO ≤ IMAX 1.20 1.25 1.30 V
PD ≤ PMAX
Temperature Stability (Note3) STT - - 0.7 - %/VO
Minimum Load Current to Maintain
IL(MIN) VI - VO = 40V - 3.5 12 mA
Regulation
VI - VO ≤ 15V, PD ≤ PMAX 1.5 2.2 - A
Maximum Output Current IO(MAX) VI - VO ≤ 40V, PD ≤ PMAX - 0.3 - A
TA=25°C
RMS Noise, % of VOUT (Note3) eN TA= +25°C, 10Hz ≤ f ≤ 10kHz - 0.003 0.01 %/VO
VO = 10V, f = 120Hz
Ripple Rejection (Note3) RR without CADJ - 60 - dB
CADJ = 10μF (Note2) 66 75 - dB
TA = +25°C for end point
Long-Term Stability, TJ = THIGH ST - 0.3 1 %
measurements, 1000HR
Note :
1. Load and line regulation are specified at constant junction temperature. Change in VD due to heating effects must be taken
into account separately. Pulse testing with low duty is used. (PMAX = 20W)
2. CADJ , when used, is connected between the adjustment pin and ground.
3. These parameters, although guaranteed, are not 100% tested in production.
2
KA317
Typical Performance Characteristics

OUTPUT VOLTAGE DEVIATION(%)
ADJUSTMENT CURRENT(uA)
TEMPERATURE (°C) TEMPERATURE (°C)
Figure 1. Load Regulation Figure 2. Adjustment Current

INPUT-OUTPUT DIFFERENTIAL(V)
REFERENCE VOLTAGE(V)
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 3. Dropout Voltage Figure 4. Reference Voltage
3
KA317
Typical Application
KA317 Vo
Input VI Output
Vadj
R1
Ci Co
0.1uF Iadj 240Ω 1uF
R2 adj
VO = 1.25V (1+R2/R1)+IadjR2
Figure 5. Programmable Regulator
Ci is required when regulator is located an appreciable distance from power supply filter.
Co is not needed for stability, however, it does improve transient response.
Since IADJ is controlled to less than 100μA, the error associated with this term is negligible in most applications.
4
KA317
Mechanical Dimensions
Package
Dimensions in millimeters
TO-220 [DUAL GAUGE]

9.90 ±0.20 4.50 ±0.20
1.30 ±0.10
(8.70)
2.80 ±0.10
(1.70)
+0.10
ø3.60 ±0.10 1.30 –0.05
18.95MAX.
(3.70)
15.90 ±0.20
9.20 ±0.20
(1.46)
(3.00)
(45°
)
(1.00)
13.08 ±0.20
10.08 ±0.30
1.27 ±0.10 1.52 ±0.10
0.80 ±0.10 +0.10

0.50 –0.05 2.40 ±0.20
2.54TYP 2.54TYP
[2.54 ±0.20] [2.54 ±0.20]
10.00 ±0.20
5
KA317
Ordering Information
Product Number Package Operating Temperature
KA317 TO-220 (Dual Gauge) 0°C to +125°C
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.v
LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
12/29/11 0.0m 001

Stock#DS400293
© 2011 Fairchild Semiconductor Corporation

KA317

Uploaded by

Copyright:

Available Formats

KA317

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KA317

Uploaded by

Copyright:

Available Formats

www.fairchildsemi.

1. Adj 2. Output 3. Input

Internal Block Diagram

Absolute Maximum Ratings

Parameter Symbol Value Unit

Parameter Symbol Conditions Min. Typ. Max. Unit

Typical Performance Characteristics

Figure 1. Load Regulation Figure 2. Adjustment Current

Figure 3. Dropout Voltage Figure 4. Reference Voltage

Figure 5. Programmable Regulator

TO-220 [DUAL GAUGE]

1.27 ±0.10 1.52 ±0.10

0.80 ±0.10 +0.10

LIFE SUPPORT POLICY

12/29/11 0.0m 001

You might also like