Scribd Logo
Upload

Welcome to Scribd!

  • 335 views

    Pre Test and Post Test - Carpentry and Masonry Bsie Ia 3a Btvted Ani 3a 1

    Uploaded by

    Jullie Ann Solano
    The document is a pre-test and post-test for carpentry and masonry. The pre-test contains 27 multiple choice questions testing knowledge of tools, materials, and techniques used in carpentry and masonry. The post-test contains 28 similar multiple choice questions testing knowledge of tools, materials, techniques, and woodworking joints in carpentry as well as concrete mixtures, curing, and laying techniques in masonry.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Pre Test and Post Test - Carpentry and Masonry Bsie Ia 3a Btvted Ani 3a 1

    Uploaded by

    Jullie Ann Solano
    335 views10 pages
    The document is a pre-test and post-test for carpentry and masonry. The pre-test contains 27 multiple choice questions testing knowledge of tools, materials, and techniques used in carpentry and masonry. The post-test contains 28 similar multiple choice questions testing knowledge of tools, materials, techniques, and woodworking joints in carpentry as well as concrete mixtures, curing, and laying techniques in masonry.

    Original Title

    PRE-TEST-AND-POST-TEST_CARPENTRY-AND-MASONRY-BSIE-IA-3A-BTVTED-ANI-3A-1

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a pre-test and post-test for carpentry and masonry. The pre-test contains 27 multiple choice questions testing knowledge of tools, materials, and techniques used in carpentry and masonry. The post-test contains 28 similar multiple choice questions testing knowledge of tools, materials, techniques, and woodworking joints in carpentry as well as concrete mixtures, curing, and laying techniques in masonry.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    335 views10 pages

    Pre Test and Post Test - Carpentry and Masonry Bsie Ia 3a Btvted Ani 3a 1

    Uploaded by

    Jullie Ann Solano
    The document is a pre-test and post-test for carpentry and masonry. The pre-test contains 27 multiple choice questions testing knowledge of tools, materials, and techniques used in carpentry and masonry. The post-test contains 28 similar multiple choice questions testing knowledge of tools, materials, techniques, and woodworking joints in carpentry as well as concrete mixtures, curing, and laying techniques in masonry.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 10

    CARPENTRY AND MASONRY

    PRE-TEST & POST-TEST


    UNIT - 8 CARPENTRY AND MASONRY (PRE-TEST)

    1. In carpentry, splicing or joining of wood using of two side blocks is called:


    a. Scarfing
    b. Jointing
    c. Lapping
    d. Fishing
    2. here is considerable number of wood joints. The simplest and easiest to make:
    a. Dado joint
    b. Lap joint
    c. Miter joint
    d. Butt joint
    3. Which is considered to be the oldest and most common used building material?
    a. Steel
    b. Wood
    c. Cement
    d. Sand
    4. According to the building code of the Philippines, for how many years shall concrete be maintained
    above 10 °C. Which of the following are known as coarse aggregates in a concrete mixture?
    a. 3 days
    b. 5 days
    c. 7 days
    d. 10 days
    5. Which of the following are known as coarse aggregates in a concrete mixture?
    a. Sand
    b. Soil
    c. Gravel
    d. Stones
    6. What do you call the process of hardening of concrete?
    a. Curing
    b. Setting
    c. Hardening
    d. Molding
    7. A mason wants to set or cut brick, rock, or stone. Which is tool is appropriate?
    a. Claw hammer
    b. Crandball
    c. Mason’s hammer
    d. Star drill
    8. A carpenter wants to measure long distances. Which tool is appropriate?
    a. Ruler
    b. Extension rule
    c. Meter stick
    d. Push-pull rule
    9. A carpenter wants to mark very rough objects. Which tool is appropriate?
    a. Chalk line
    b. Extension rule
    c. Level
    d. Border line
    10. A carpenter wants to obtain vertical line. Which tool is appropriate?
    a. Rule
    b. Level
    c. Plum bob
    d. Push-pull rule
    11. A carpenter wants to cut lumber across the grain. Which tool is appropriate?
    a. A crosscut saw
    b. Rip saw
    c. Back saw
    d. Hack saw
    12. If you have 2ft length of a piece of wood, how long is it in inches?
    a. 25
    b. 12
    c. 22
    d. 24
    13. If you have 2 yards length of a piece of wood, how long is it in inches?
    a. 82
    b. 72
    c. 84
    d. 64
    14. In the construction site, what protects the carpenter from falling?
    a. Hat
    b. Belt and harness
    c. Helmet
    d. She
    15. These are compress baked clay that are processed into workable materials?
    a. Stone
    b. Sand
    c. Bricks
    d. CHB
    16. Which lumber has wood fibers that are packed closely together?
    a. Edge-grain
    b. Angle grain
    c. Flat-grain
    d. Close-grain
    17. Which lumber has wood fiber that do not run parallel to the board?
    a. Edge-grain
    b. Cross-grain
    c. Flat-grain
    d. Close-grain
    18. A carpenter makes a picture frame. Which type of joint is appropriate?
    a. Dado joint
    b. Tenon joint
    c. Lap joint
    d. Miter joint
    19. Which is an artificial stone that results from mixing cement and water?
    a. Concrete
    b. Grout
    c. Mortar
    d. Bricks
    20. Which term refers to the process of finishing using mortar?
    a. Finishing
    b. Fine finishing
    c. Concreting
    d. Plastering
    21. A mason wants to lay ceramic tiles. Where does he start?
    a. Front
    b. Left
    c. Right
    d. Center
    22. A mason wants to lay concrete hollow blocks. Where does he start?
    a. Front
    b. Left
    c. Right
    d. Center
    23. A mason wants to mix mortar for plastering. What does he mix?
    a. Cement and water
    b. Cement and sand
    c. Sand and water
    d. Water and cement
    24. A mason wants to lay concrete hollow blocks into a 10 sq. m. wall. How manty CHB are needed?
    a. 100 pcs
    b. 120 pcs
    c. 122.5 pcs
    d. 125 pcs
    25. A mason wants to lay 16” by 16” ceramic tiles into 10 sq. m. room. How many tiles are needed?
    a. 60 pcs
    b. 61.5 pcs
    c. 62.5 pcs
    d. 63 pcs
    26. How many CHBs are installed for a wall having a dimension of 2.5 m width and 4.0 m height?
    a. 125 pcs
    b. 122.5 pcs
    c. 300 pcs
    d. 400 pcs
    27. Which tile is appropriate in the toilet and bathroom flooring?
    a. Glaze tiles
    b. Ceramic tiles
    c. Non-skid granite tiles
    d. Clay tiles
    28. Bricks are laid where its longer side is exposed to view. This arrangement is called
    a. Header
    b. Stretcher
    c. Bond
    d. Mortar
    29. The most widely used masonry materials for construction works are?
    a. Ashlar
    b. Bricks
    c. Rubble stones
    d. Concrete Hollow Blocks
    30. It is a masonry material manufactured from clay and other materials?
    a. Stones
    b. Stucco
    c. Bricks
    d. Concrete pavers
    UNIT 8 – CARPENTRY AND MASONRY (POST-TEST)

    1. Which of the following is NOT a requirement to consider in proportioning concrete mixture?


    a. Economy
    b. Workability
    c. Strength
    d. Flexibility

    2. Concrete is said to be workable if it can be molded or be deformed without segregation. This


    characteristics is known as __________.

    a. Consistency
    b. Plasticity
    c. Mobility
    d. Workability

    3. The following are factors that regulate the strength of concrete, EXCEPT

    a. Correct proportion of ingredients


    b. Proper method of mixing
    c. Adequate protection of concrete
    d. Dropping concrete mixture from high elevation

    4. What tool or instrument is used to set-up the lateral level of a concrete fence?

    a. Water hose level


    b. Spirit level
    c. Plum bob
    d. Straight edge

    5. According to the building code of the Philippines, for how many days shall concrete be maintained above
    10 °C temperature and in a moist condition?

    a. 3 days
    b. 5 days
    c. 7 days
    d. 10 days

    6. Which of the following are known as coarse aggregates in a concrete mixture?

    a. Sand
    b. Soil
    c. Gravel
    d. Stones

    7. What do you call the process of hardening of concrete?

    a. Curing
    b. Setting
    c. Hardening
    d. Molding

    8. What is the type of hydraulic cement is widely used in small and large construction including roads and
    highways?

    a. Hydraulic cement
    b. Portland cement
    c. Pozzolan cement
    d. lime
    9. how many pieces of 4” x 8” x 16” concrete hollow blocks (CHB) can be laid per bag of cement as
    mortar?

    a. 55 to 60 pcs.
    b. 25 or 30 pcs.
    c. 30 to 60 pcs.
    d. 40 to 40 pcs.

    10. What ingredient in concrete is added to the batch immediately before or during its mixing to improve its
    durability and accelerate strength development?

    a. Fine aggregates
    b. Coarse aggregates
    c. Admixture
    d. Water

    11. Which refers to the ease with which the fresh concrete can be molded without segregation?

    a. Plasticity
    b. Consistency
    c. Mobility
    d. Grout

    12. Which refers to the degree of wetness of slump of the concrete mixture?

    a. Plasticity
    b. Consistency
    c. Mobility
    d. Grout

    13. Which is an artificial stone that results from mixing cement, sand, gravel and water?

    a. Concrete
    b. Grout
    c. Mortar
    d. Bricks

    14. Which is an artificial stone that results from mixing cement, sand, and water?

    a. Concrete
    b. Grout
    c. Mortar
    d. Bricks

    15. Which is an artificial stone that results from mixing cement and water?

    a. Concrete
    b. Grout
    c. Mortar
    d. Bricks

    16. Which term refers to the process of finishing using mortar?

    a. Finishing
    b. Fine finishing
    c. Concreting
    d. Plastering

    17. A mason wants to lay ceramic tiles. Where does he start?

    a. Front
    b. Left
    c. Right
    d. Center
    18. A mason wants to lay concrete hollow blocks. Where does he start?

    a. Front
    b. Left
    c. Right
    d. Center

    19. A mason wants to mix mortar for plastering. What does he mix?

    a. Cement and water


    b. Cement and sand
    c. Sand and water
    d. Water and cement

    20. A mason wants to lay concrete hollow blocks into 10 sq. m. wall. how many CHB are needed?

    a. 100 pcs.
    b. 120 pcs.
    c. 122.5 pcs.
    d. 125 pcs.

    21. A carpenter makes a picture frame. Which type of joint is appropriate?

    a. Dado joint
    b. Tenon joint
    c. Lap joint
    d. Miter joint

    22. A carpenter fixes shelves of bookcase. Which type of joint is appropriate?

    a. Dado joint
    b. Mortise and Tenon joint
    c. Lap joint
    d. Miter joint

    23. In which wood joint is the end of one member inserted to hole of the other member?

    a. Dado joint
    b. Mortise and Tenon joint
    c. Lap joint
    d. Miter joint

    24. which wood joint describes the technique for joining two pieces by putting one side over the other?

    a. Dado joint
    b. Butt joint
    c. Lap joint
    d. Miter joint

    25. Which wood joint describes the technique for joining two pieces by putting one end over the other?

    a. Dado joint
    b. Butt joint
    c. Lap joint
    d. Miter joint

    26. A carpenter wants to make a dining table. Which joint is appropriate to become rigid and durable?

    a. Miter joint
    b. Mortise and Tenon joint
    c. Dado joint
    d. Butt joint

    27. which is the simplest type of wood joint?


    a. Dado joint
    b. Butt joint
    c. Lap joint
    d. Miter joint

    28. which wood joint describes the technique for joining two pieces by cutting of 45 degrees angle?

    a. Rabbet joint
    b. Butt joint
    c. Lap joint
    d. Miter joint

    29. which wood joint protects the room occupants from seeing outside?

    a. Rabbet joint
    b. Butt joint
    c. Bridle joint
    d. Miter joint

    30. which wood joint is used to support the middle of a bench?

    a. Dado joint
    b. Butt joint
    c. Bridle joint
    d. Miter joint

    31. In the construction site, what protects the carpenter from falling?

    a. Hat
    b. Belt and Harness
    c. Helmet
    d. Shed

    32. in measuring cylindrical object, what is the appropriate tool to be used?

    a. Ruler
    b. Caliper
    c. Push-pull rule
    d. Meter stick

    33. Fastening materials are important in woodworks. The most common of these materials is _____.

    a. Dowel
    b. Bolts
    c. Screws
    d. Nails

    34. A wood product made of three or more veneer slice that are laid upon the other and bonded with glue
    or synthetic resin is _____.

    a. Pressed wood
    b. Plywood
    c. Particle board
    d. Softwood

    35. Which of the following toll is used in checking the squareness of the corners and flatness of a surface?

    a. Straightedge
    b. Steel square
    c. Sliding T-bevel
    d. Try square

    36. In a wooden floor system, the major horizontal support member upon which the floor system is laid is
    the _____.
    a. Floor joist
    b. Sill
    c. Header
    d. Girder

    37. A type of roof frame consisting series of triangles used to distribute loads and stiffen the structure of the
    roof is _____.

    a. Girts
    b. Truss
    c. Purlins

    38. A triangular file is used to sharpen a saw. What is the angle of the file set against the bevel of the tooth
    of a crosscut saw?

    a. 30 degrees
    b. 45 degrees
    c. 90 degrees
    d. 60 degrees

    39. What kind of wood finishing material is used when you want a solid color instead of a wood pattern
    finish?

    a. Opaque finishes
    b. Bleaches
    c. Stains
    d. Lacquers

    40. A saw angle should be adjusted depending on the recommended angel for soft and thin wood?

    a. 30-45 degrees
    b. 60 degrees
    c. 80 degrees
    d. 20 degrees

    GROUP 3 – CARPENTRY AND MASONRY

    MEMBERS:

    DEREZ, ANNA KARIZ A.

    GARCES, EUJIN RIEL

    LAJINAO, JOVELYN C.

    REBANCOS, ANGEL JOYCE G.

    SIMBAHON, SHIELA MAE S.

    COURSE & SECTION:

    BSIE-IA-3A & BTVTED-ANI-3A

    You might also like