Scribd
Upload
51 views2 pages

IV8WTEST

The document summarizes the features of a coaxial cable tester and UTP cable tester. It can test HD-AHD, HD-TVI, HD-CVI video signals over coaxial cable and check the connection status, cable type and wire sequence of UTP cables. It has a 5-inch LCD display, supports PTZ protocol and generates color bars and test images for troubleshooting video signals. The device is powered by batteries or DC power and has BNC and audio inputs/outputs, as well as optional VGA/HDMI connectivity.

Uploaded by

Abraham Lopez G.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

IV8WTEST

The document summarizes the features of a coaxial cable tester and UTP cable tester. It can test HD-AHD, HD-TVI, HD-CVI video signals over coaxial cable and check the connection status, cable type and wire sequence of UTP cables. It has a 5-inch LCD display, supports PTZ protocol and generates color bars and test images for troubleshooting video signals. The device is powered by batteries or DC power and has BNC and audio inputs/outputs, as well as optional VGA/HDMI connectivity.

Uploaded by

Abraham Lopez G.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Model HD coaxial tester UTP Cable Tester

Video Test Display UTP cable connection status ,


cable type and the sequence of wires
CVBS, HD-AHD, HD-TVI, HD-CVI, UTP cable test
Signal mode as well as read the number of the test
support Control-over-Coax
box.
NO SIGNAL
5.0 inch VGA TFT-LCD, 800（RGB）
Display DC12V 1A Power Output
PROTOCOL PELCO-D
x 480 resolution
ADDR 1

DC12V power
BAUD 2400
LCD Brightness, Contrast, Saturation Output DC12V1A power for camera
output
adjustment adjustable
Audio Input Test
1 channel BNC Input & 1 channel
Video IN/OUT
BNC Output Audio input test 1 channel audio signal input
VGA/HDMI Test（Optional）* Power
Support VGA/HDMI 1.0 video input, Power Adapter DC 5V（1.0A）
once connect VGA/HDMI video,
VGA/HDMI Battery Two Built-in 18650 2600mA
please switch selector to select
Input
HDMI or VGA mode. The maximum After charging 4-5 hour, working time
resolution is 1920X1440 Rechargeable
lasts 10 hours
PTZ Controller Parameter
NO SIGNAL Communication RS485 Operation OSD menu, select your desired
1
NET CABLE TEST
X setting language: English, Chinese, etc.
2 X
Compatible with protocols PELCO-D/
3 X
PTZ Protocol
P
4 X
5
6
X
X
General
7 X
8 X
Baud Rate 1200, 2400, 4800, 9600, 14400bps Dimension/
170mm x 114mm x 34mm / 400g
NO SIGNAL
Video Signal Generation Weight
ENGLISH

MODE Support standard color bar output


Color bar
RESET
(Red, Green, Blue, White, Black,
generator
Grey) and testing image output
7 LED lamp switch

Far focus: Focus the image faraway /


8
change the setting parameters
Near focus: Focus the image nearby /
9
change the setting parameters

10 Zoom In / change the setting parameters


16 Video signal input (BNC interface)
Zoom Out / change the setting
11
parameters 17 Video signal output (BNC interface)

12 The power indicator


18 LED lamp

13 12V output indicator Output DC12V 1A power, for provisional


19
DC test supply
Output DC5V 1A power, for provisional
14 The data-transmission indicator 20
DC test supply

15 5V charging indicator 21 UTP cable interface test


Press more than 3 seconds, turn on or
1
off the device
22 VGA input interface (Optional) *
2 Menu key
23 VGA/HDMI switch (Optional) *
Leftward. Move menu item / Tilt the PTZ
3
leftward.
24 HDMI input interface (Optional) *
Rightward. Move menu item / Tilt the
4
PTZ rightward. 25 Audio input test
Upward. Move menu item / Tilt the PTZ
5 RS485 Interface, RS485 communication
upward. 26
for the PTZ
Downward. Move menu item / Tilt the
6
PTZ downward. 27 Micro USB charge interface

You might also like