Eni Grease SLL 00

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

AGIP GREASE SLL 00

PRODUCT DATA SHEET

AGIP GREASE SLL 00 is a lubricating grease formulated from a special synthetic fluid and a gelling agent.

CHARACTERISTICS (TYPICAL FIGURES)

AGIP GREASE SLL


NLGI consistency 00
Base oil viscosity at 40°C mm²/s 145
Worked penetration dmm 420
ASTM dropping point °C 180

PROPERTIES AND PERFORMANCE

 AGIP GREASE SLL 00 has especially good oxidation stability not only under static conditions, but also
when subjected to working and churning by moving parts.
 Its high resistance to mechanical loads ensures homogeneity and structural stability even after a long
period of service. There is thus no possibility of throw-off and loss through the seals.
 Its special antirust properties furnish excellent protection of metal surfaces, even in very moist
conditions.
 It markedly reduces the coefficient of friction between metal surfaces, thus lowering the running
temperature.
 It guarantees superior lubrication over a wide range of working temperatures and its pumpability is
good even at low temperatures.

APPLICATIONS

AGIP GREASE SLL 00 is especially suitable for the lubrication of enclosed gears, such as low and medium
power gear reduction units that are lubricated "for life", or any similar lubrication application where the
grease has to remain in service for a very long period. It is particularly recommended for lubrication of
worm and wheel gears, which are normally of steel and bronze respectively.
More generally AGIP GREASE SLL 00 is suitable for lubrication of all enclosed systems that require a
lubricant with the special characteristics of a semi-grease, or are designed for dip or oil-bath lubrication
using high viscosity oils.
Some typical examples are sealed gearboxes of electrical and pneumatic tools, sealed household electrical
appliances, gear couplings of various types, and centralized lubrication systems of rubber vulcanizing
presses.

SPECIFICATIONS

AGIP GREASE SLL meets the requirements of the following classifications:

- DIN 51826 G PG 00 K-30


- ISO-L-CKG

Eni S.p.A. Via Laurentina 449, 00142 Rome [IN866.03.00]


Refining & Marketing Division Standard Phone +39 06 5988.1
www.eni.com Page 1 of 1

You might also like