Get your vehicle serviced in 1 hour at no additional cost. Contact your nearest Dealership for details.

Facility available at selected Dealerships only. Terms and conditions apply

II
 Busy Life?
Easy Servicing!
Now, service your bike anywhere, anytime.

Service the vehicle at your door step.

Available for regular maintenance or breakdown service only.

Offered at nominal convenience charges.


Contact your nearest Dealership for details.

Facility available at selected Dealerships only. Terms and conditions apply

II
Busy Life?
Easy Servicing!
Now, service your bike anywhere, anytime.

Service the vehicle at your door step.

Available for regular maintenance or breakdown service only.

Offered at nominal convenience charges .


Contact your nearest Dealership for details.
Facility available at selected Dealerships only. Terms and conditions apply

IIIIII
 EXPERT ON WHEELS II
PICKUP AND DROP III
CONTENTS IV
CONTACT(S) FOR SUPPORT 1
FOREWORD 5
UNIQUE FEATURES OF TVS JUPITER 125 6
ACCESSORIES 10
SAFETY INFORMATION 11
NOTICE 12
RUNNING-IN INFORMATION 13
SAFE RIDING TIPS 14
KNOW YOUR TVS JUPITER 125 18
RIDING YOUR TVS JUPITER 125 44
MAINTENANCE 48
WARRANTY AND SERVICES 73
TECHNICAL SPECIFICATIONS 79
GENERAL INFORMATION 84

IV
 Incase you need any Clarification please contact
TVS Motor Company Authorised Main Dealer / Authorised Dealer
Or
TVS Motor Company’s Area Offices (flip over for addresses)
Or

Toll Free Number : 1800-258-7111

Email : [email protected]

Disclaimer : TVS Motor Company or any of its officials / Authorized Main dealer / Authorized Dealer do not ask customers for bank
/ card / wallet details / authentication. In case you face any such claim, please report to the relevant local authorities immediately.

11
1. TVS Motor Company Limited 4. TVS Motor Company Limited 7. TVS Motor Company Limited
V Floor, Gee Gee Universal, No. 600, Anand Surya, 2nd Floor, No. 502B, 6th Floor, B Wing,
No. 2, MC Nichols Road, 15th Cross, 6th Phase, JP Nagar, Shriram Shyam Towers,
Chetpet, Chennai - 600 031. Opp. BMTC Bus Stop, Near LIC Square, Sardar,
Phone : 044-28361651/28361654 Bangalore - 560 078. Nagpur - 440 001.
Email : [email protected] Phone : 080-26653433 Phone : 0712-2569932
[email protected] Email : [email protected] Email : [email protected]
[email protected]
TAMILNADU-2 ANDHRAPRADESH & TELANGANA
2. TVS Motor Company Limited 5. TVS Motor Company Limited GUJARAT
No. 10, 2nd floor, Rukumani Towers, First Floor, 8. TVS Motor Company Limited
Shree Shanmugapriya Towers, No. 3-11-30, Plot No. 11, 1208-1213, Shivalik Satyamev,
Kannuswamy Street, Paigha Colony, Behind Anand Theater, Below Bopal Over Bridge,
Behind Hotel Annapoorna, Secunderabad - 500 003. Ambli-SP Ring Road Junction, Bopal,
R S Puram, Coimbatore - 641 002. Phone : 040-27840590/27844419 Ahmedabad- 380 058.
Phone : 0422-4350060/2541035 Email : [email protected] Phone : 079-65443748
Email : [email protected] [email protected] Email : [email protected]

KERALA MAHARASHTRA-1 & 2

3. TVS Motor Company Limited 6. TVS Motor Company Limited
Ambady Towers, Second Floor, No. 401, 4th Floor, The Chambers,
Door No. 27/631, A6, Plot No. 4/12/3, Near Ganapati Chowk,
Edappally-Pookkattupady Road, Viman Nagar, Pune - 411 014.
Edappally PO., Cochin - 682 024. Phone : 020-26632112/26632110
Phone : 0484-2544578/2556938 Email : [email protected]
Email : [email protected]

2
 Chinar Fortune City, Zirkapur - 140 603. Opp. Tollygunge Police Station,
Near Brindhavan Dhaba, Phone : 01762-464777/465777 Kolkatta - 700 026.
Hosangabad Road, Email : [email protected] Phone : 033-24617096/24617092
Bhopal - 462 026. Email : [email protected]
Phone : 0755-2499406/2499306 UTTAR PRADESH WEST
Email : [email protected] 13. TVS Motor Company Limited BIHAR
[email protected] D-3 & D-4, 2nd Floor, 16. TVS Motor Company Limited
Sector - 10, Noida, N-Plaza, Jamal Road,
RAJASTHAN-1 & 2 Uttar Pradesh - 201 301. P.S. Kotwali,
10. TVS Motor Company Limited Phone : 011-29834640/29834773 Patna - 800 001.
Plot No. 17-18, Email : [email protected] Phone : 0612-2200068/2200069
2nd Floor of National Motors Building, Email : [email protected]
Jhotwara Industrial Area, UTTAR PRADESH CENTRAL & EAST
Jaipur - 302 012. 14. TVS Motor Company Limited
Phone : 0141-5150901/5150902 1st Floor, Cyber Tower, TC-34/V-2,
Email : [email protected] Vibhuti Khand, Gomti Nagar,
[email protected] Lucknow - 226 010.
Phone : 0522-4918300/4918301
DELHI & HARYANA Email : [email protected]
11. TVS Motor Company Limited
D-3 & D-4, 2nd Floor,
Sector - 10, Noida,
Uttar Pradesh - 201 301.
Phone : 011-29834640/29834773
Email : [email protected]

33
 Bhubaneshwar - 751 010.
Phone : 0674-2580019
Email : [email protected]

NORTH EAST STATES

18. TVS Motor Company Limited
147, Udayan, Ganesh Guri,
Near Hotel D Courtyard,
R G B. Road, Guwahati - 781 005.
Phone : 0361-2202030/2202031
Email : [email protected]

4
scooter. As a proud owner of TVS Jupiter 125, you are now part of the TVS family with millions of satisfied customers.
The TVS Jupiter 125 comes with new unique features which have been developed keeping your needs in mind - Best
in class underseat storage with twin helmet space, best in class mileage, longest seat in the segment, front fuel
fill, metal body, signature style elements and much more. Overall, the TVS Jupiter 125 is a perfect blend of style,
performance and utility.
All the features of your new vehicle, along with information on how it operates is available in this manual. Kindly read
it carefully and follow the instructions to enjoy years of comfortable and safe riding. To ensure reliable performance,
we urge you to get your TVS Jupiter 125 serviced only at TVS Motor Company Authorised Main Dealer / Authorised
Dealer at specified intervals.
Experience the next level of commuting with the all new TVS Jupiter 125!

TVS MOTOR COMPANY LIMITED

55
which is equipped with innovative system delivers a noiseless start of
features like Digital fuel indicator, your scooter.
Time indication, Digital odometer,
Distance to empty, Average fuel DTE ‘TVS intelliGO’
efficiency, Instantaneous fuel AFE An intelligent start / stop system
IFE km l
efficiency, Trip meter A, B & F, that further enhances fuel efficiency.
ODO
Service reminder, Helmet indication TRIP Easy on your pocket and kinder to
ABF km
and more. the environment. Refer page no.
TRIP F: Trip F is a unique feature in 26 for details.
your vehicle which would indicate
the number of kilometers driven in LOW FUEL INDICATOR
reserve condition. This would be a ‘Low Fuel Indicator’ is yet another
critical information to prevent fuel unique feature of your scooter which
shortage during ride. indicates you to refill the fuel, when
the fuel in the tank goes below
ECONOMETER® minimum safe level. Refer page no.
Your scooter’s speedometer has 28 for details.
ECONOMETER® which indicates
whether you are riding in ‘Economy’ SIDE STAND CUT-OFF
mode or ‘Power’ mode. This is an You scooter has been provided with
unique feature of your scooter which auto engine cut-off and start control
guides you to ride your scooter fuel system when the side stand is
efficiently. Refer page no. 27 for engaged.
details.

6
at the ignition lock itself. Refer page even getting off from the vehicle.
no. 23 for details.

SEAT ASSEMBLY
PASS-BY SWITCH Longest seat in its category with
Pass-by Switch is a feature that 790 mm length for comfortable
allows you to easily switch between travels of your family members.
high & low beam of the head
lamp with easy press and auto
release. It is helpful especially while LED HEAD LAMP
overtaking. Refer page no. 35 for Your scooter comes in with a
details. premium LED head lamp. Efficient
and bright, this gives your scooter a
totally upgraded Look and Style with
‘TVS intelliGO’ SWITCH better visibility for night rides.
An exclusive intelliGO switch is
provided to switch ‘OFF’ and ‘ON’
the intelliGo system as and when PATENTED E-Z CENTRE STAND
required. Refer page no. 36 for E-Z Center Stand of your scooter
details. reduces the effort required to place
the scooter on stand. Refer page
no. 38 for operating procedure.

77
safety feature which protects your ‘Adjustable Rear Shock Absorber’
scooter from falling due to wheel with canister - First time in scooters.
rotation when it is parked with the This allows you to adjust the
side stand on a slope. Refer page required level of hardness / softness
no. 35 for details. as per the usage requirement at just
the push of a lever.

RETRACTABLE BAG HOOKS

Your scooter has two retractable SYNCHRONISED BRAKE
‘Bag Hooks’ to carry light luggage TECHNOLOGY (SBT)
like carry bags weighing upto 3 kg. Taking technological innovation to
One hook is located below the next level, your scooter comes with
handle bar on the rear panel and the ‘Synchronised Brake Technology
other one is located on the cover (SBT)’. This feature enhances the
front below the front end of seat. safety by avoiding skidding during
sudden braking.

UNDER-SEAT STORAGE (UTILITY

TELESCOPIC FRONT FORK BOX)
Your scooter has Motorcycle-like Your scooter has a 33 litre under-
‘Telescopic Front Suspension’ for seat storage space to carry your
extreme riding comfort even while luggage belongings, two helmet
riding on bad roads. etc., refer page no. 40 for details.

8
gives progressive braking of your capacity and used to hold your
scooter, results in best-in-class mobiles while charging or hold a
‘shortest distance’ braking. It also small bottle.
provide superior comfort in bad road
conditions.

TUBELESS TYRES
Another important unique feature
in your scooter is ‘Tubeless Tyres’.
Tubeless tyres reduce the chances
of getting punctured. Even if there
is a puncture, sudden leakage of air
is avoided, thereby provide better
safety and convenience. It is also
very easy to repair the punctured
tyres.

99
SMART PHONE CHARGER* Lady pillion can be purchased as
Your scooter is provided with a optional accessory.
socket for charging your smart
phone even while you are traveling
and it is located below the right side LADY PILLION FOOT REST*
of the handle bar. Refer page no. Your scooter has a provision fit
42 for usage details. ‘Lady pillion foot rest’ for easy
resting of legs for the ladies tavels
as a pillion and it is a mandatory
UTILITY BOX LIGHT* accessory.
Your scooter has a provision to fix
‘Utility Box Light‘ which lights up the
utility box automatically whenever
the seat is open.

INDICATOR BEEPER*
Your scooter has an electronic
beeper which alerts you that the
turn signal indicators and side stand
is ‘ON’. This beeper comes as a
mandatory accessory.

* Mandatory and optional accessory will be charged extra

10
with operating or maintaining the vehicle, you must use your own judgment.
You will find important safety information in following form in this manual. These words carry the following connotations:

Warning
Disregarding this message might result in injury to the rider or deadly accidents.

Caution
This message indicates special procedures or precautions to be followed to avoid damage to the vehicle.

Note
This message provides further clarification for clear understanding of any particular information.

11
11
better you know your vehicle, the more pleasure you will experience riding your new vehicle. Ensure that anyone else
riding your TVS Jupiter 125 does the same.
All information, illustrations, photographs and specifications contained in this owner’s manual are based on the latest
product information available at the time of this publication. TVS Motor Company Limited may, however, incorporate
modifications or improvements on its vehicles at any time without notice, and therefore, in such events it is possible
that the relevant part of the owner‘s manual does not apply to your vehicle.
Prior permission of TVS Motor Company Limited is required for quoting, copying or reproducing any part of this
owner’s manual.

Note
Accessories shown in the picture may not be part of the standard equipment.
Pictures shown in this manual are of TVS Jupiter 125 alloy wheel with front Disc brake model unless specified.
Your scooter is provided with always glowing head lamp (AHO). The head lamp glows automatically once the
engine is started.
TVS Jupiter 125 fitted with ‘TVS intelliGO’ which is an intelligent start/stop system that switches 'OFF & ON'
the scooter automatically (refer page no. 26 for further details).
Since your vehicle is fitted with side stand cut-off system ensure to retract the side stand before starting the
vehicle.

Revision 4, As on 23 Mar 2023

12
running-in period. It is especially important that you avoid operating the engine in high speed (RPM), which could
expose the engine parts to excessive stress. Recommended speed during the running-in is:
Maximum 50 km/h speed upto 1000 km (vary the engine speed for better mating of parts).
The first free service at 500 ~ 750 km is most important. During running-in period all the engine components and
other parts will have set in. All adjustments to be restored, all fasteners to be tightened. Engine and Transmission
oil to be replaced. Timely performance of the first free service will ensure optimum service life and performance
from the engine.

Caution
Replacing the engine and transmission oil during first service is most important for better life of engine. Always use TVS
TRU4 SKUUTA (SAE 10W30 API-SL, JASO MB) oil for better performance and life.

13
13
Familiarise yourself with new TVS Jupiter 125
Riding skill and your mechanical knowledge form the foundation of safe riding practices. We suggest you to practice
riding TVS Jupiter 125 in a low-traffic condition until you are thoroughly familiar with your vehicle and its controls.
Remember practice makes you perfect.
Riding apparel
Loose, fancy clothing can be uncomfortable and unsafe when riding a two-wheeler. Choose good quality two wheeler
riding apparel.
Know your limits
Ride within the boundaries of your own skill at all times. Knowing these limits and staying within them will help you
avoid accidents.

Warning
Two wheeler safety starts with wearing a good quality helmet. One of the most serious injuries that can happen is a
head injury. Always wear an ISI approved helmet that should fit your head comfortably and securely. You should also have
good quality goggles to protect your eyes and help your vision.
To prevent or minimize accident, never consume alcohol or drugs before or during the operation of your vehicle. Even minimal
consumption of these will affect the rider’s ability to control the vehicle.

14
2. Sit and adjust yourself on seat so that arms and is moving. Centrifugal force increases in proportion
shoulders are relaxed. with speed and the radius of the corner.
3. Look widely instead of gazing at one point. During cornering, reduce speed so as to lessen the
effects of centrifugal force. By all means, avoid abrupt
application of brake or sudden steering.
Warning Braking
One-hand riding is dangerous. Keep both hands firmly For safe riding, it is very important to master the
on the handle bar and both feet securely on the floor braking techniques.
board. Under no circumstances should both the hands 1. Close / release the throttle.
be removed from the handle bar, as it is very dangerous. 2. Hold the vehicle upright as you apply the brake.
Avoid use of mobile phones while riding as it could 3. Progressive application of brake is safer.
lead to fatal accident. 4. Apply both the brakes. ‘SBT’ provides additional
Slow down to a safe speed before negotiating a corner. braking even when ‘only rear brake’ is applied,
If this is the first time that you are riding a vehicle of this But applying ‘both the brakes’ helps you to use
type, we suggest that you practice on a safe, open area the full potential of the brakes.
to become thoroughly familiar with the operation of the 5. Riding down hills, while cornering and wet roads,
vehicle. close throttle and come to a slower speed to
avoid the loss of control over the vehicle due to
skidding.

15
15
 friction does not develop and brakes do not work The addition of unsuitable accessories can lead to
well. unsafe operating conditions. Your friendly Dealer
2. Even when the brake works normally, if the road will assist you in selecting quality accessories and
surface is wet or the tyre surface is worn-out, installing them correctly.
tyres do not take a firm hold on the surface, While selecting the accessories, make sure that the
increasing the stopping distance. accessories should not obstruct lighting, steering,
3. Approximately 60% braking effect is from front suspension level and ground clearance.
brake. Non-usage of front brake causes poor Additional electrical equipments is not acceptable
braking. as it will void the warranty terms of the vehicle.

Warning
As the vehicle speed increases, the stopping distance
also increases progressively. Be sure that, you have
sufficient distance between you and the vehicle or
obstruction ahead of you.
Using only the front or rear brake is dangerous and can
cause skidding and loss of control. Apply both the
brakes together and with great care on a wet road or
other slippery surfaces. Any abrupt braking on slippery
or irregular roads can cause loss of rider control.

16
needs any adjustments, please consult nearest TVS the vehicle or noise due to sudden escape of gas during
Motor Company Authorised Main Dealer / Authorised opening of fuel tank cap, immediately report to the TVS
Dealer. Motor Company Authorised Main Dealer / Authorised
While adequate care is exercised at the factory to Dealer.
ensure that the emissions are within the limits, it is
essential for the owner to always maintain the TVS
Note
Jupiter 125 in good condition by getting it periodically
Your vehicle is tested and certified for emission
checked and serviced by TVS Motor Company which meets BS VI emission norms and is valid for
Authorised Main Dealer / Authorised Dealer so initial 12 months from the date of purchase. Get
that the emission and fuel consumption levels are your vehicle certified by the Government authorised
maintained as per norms. emission testing station after initial 12 months of
Crankcase emission control system usage. And ensure to get vehicle certified on expiry
The engine of your TVS Jupiter 125 is equipped of the certificate obtained.
with a closed crankcase ventilation system to
prevent discharging crankcase emissions into
the atmosphere. Blow-by gas is returned to the
combustion chamber through the air cleaner and the
fuel system.
Evaporative emission control system
TVS Jupiter 125 is equipped with an evaporative
emission control system which consists of a canister
and associated piping. This system prevents the
escape of fuel vapors from the fuel tank.

17
17
The frame serial number is stamped on the frame, at The engine serial number is stamped on the left
the rear end below the seat assembly. Open the seat side of the engine, at the bottom, near center stand
assembly to read the frame number. mounting. See bottom to read serial number.

18
 2 2. Rear view mirror R*
16 17 1
3. Right hand brake lever
4. Throttle grip
5. ‘TVS intelliGO’ switch
6. Electric starter switch
7. Smart phone charger*
15 8. All in one lock
9. Glove box
14 3 10. Bag hook (front)
4 11. Fuel tank cap
12. Horn switch
5
13. Turn signal lamp switch
13 6 14. Left hand brake lever
12 7 15. High / low beam cum pass-by
switchs
11 8 16. Rear view mirror L*
10 9 17. Parking brake

* Mandatory and optional accessory will be charged extra

19
19
 shockabosrber
2. Rear brake adjusting nut
3. Side stand
7
4. Pillion foot rest L
5. Caliper assembly front
6. Disc plate front
7. Pillion handle

6 5 4 3 2 1

20
 2. Bag hook (rear)
3. Cover front
8 4. Pillion foot rest R
5. Gauge oil level
6. Muffler assembly
7. Rear fender
8. Seat assembly

7 6 5 4 3 2 1

21
21
 1. LED Head lamp
2. Head lamp focus adjuster
3. Turn signal lamp front LH
1 4. Turn signal lamp front RH
5 5. Throttle cable adjuster
2
4 3 REAR
1. Turn signal lamp rear RH
5 1 2. Tail / brake lamp
3. Transmission oil level screw
4 2 4. Reflex reflector
5. Turn signal lamp rear LH

* License plates are mandatory accessory will be charged extra

22
1. ‘OFF’ position are turned ‘OFF’ in this position. Insert the key into
All the electrical circuits are turned ‘OFF‘ in this the lock and turn it to ‘OFF’ or ‘ON’ position to
position. Engine will not start. Key can be taken out. unlock the steering.
2. ‘ON’ position
In this position, all the electrical circuits are turned Note
‘ON’ and the engine can be started now. Key cannot When you switch on ignition key, the pump priming noise
be removed in this position. may be heard, which is normal. Avoid frequent ‘SWITCH
3. Steering ‘LOCK’ position -OFF & ON’ of ignition key, to avoid unnecessary run of
fuel pump.
TVS Jupiter 125‘s steering can be locked in both ‘left’
and ‘right’ directions. The speedometer back illumination, tail lamp and license
plate lamp glow automatically once the ignition key is
turned ‘ON’ without activating any other switches.

Caution
Leaving the ignition cum steering lock in ‘ON’ position
will drain the battery when the vehicle is not in use.
switch ‘OFF’ and take the key out when the vehicle is
not in use. For safety always lock the steering.

Warning
Never attempt to move the vehicle when the steering is
locked, you may lose balance.

23
23
position and turn it to anticlockwise direction without keep the key in ‘OFF’ position, push the key ‘IN’ and
pushing the key ‘IN’. turn it to clockwise direction. The tank cap opens
To lock the seat again, press the seat at the rear end automatically.
to its position till a ‘Click’ sound is heard. To close the fuel tank cap, press the cap at the front
end to its position until a ‘Click’ sound is heard.

Note
While closing the fuel tank cap press at the dotted mark
area of the cap for easy closing.

24
 deployed with the engine running condition, the engine
3 gets of automatically to ensure the safety.

9 If there is a error in the side stand sensor the indication

2 will blink and the vehicle will not start. In such condition,
please visit the nearest TVS Motor Company Limited
1 Authorised Main Dealer / Authorised Dealer.

11 10 4. High beam indicator lamp

Glows either when the head lamp high beam or the
pass-by is activated.
1. Turn signal indicator lamp left ( )
5. Malfunction indicator lamp - MIL ( )
Flashes when the left side turn signal indication is
MIL will be turned ON when the ECU detects a
activated.
fault in the system and MIL will blink when the ECU
2. Speedometer detects a misfire* in the engine.
Indicates vehicle speed in kilometers per hour. If the malfunction indicator lamp ‘ ‘ is glowing
3. Side stand indicator ( ) continuously or blinking continuously* when
The side stand warning indicator turns ‘ON’ along the engine is started, immediately contact the
with the buzzer to alert you when the vehicle’s side nearest TVS Motor Company Authorised Main
stand is deployed. The vehicle will not start in this Dealer or Authorised Dealer.
condition.
* Mis-firing detection is applicable only for OBD II vehicle.

25
25
If the ISG malfunction indicator is glowing continually inteliGO’ system gets enabled and the intelliGO
after the self check of the speedometer, immediately indicator ‘ ’ in the speedometer glows continuously
contact the nearest TVS Motor Company Authorised and informs you that the vehicle has entered intelliGO
Main Dealer / Authorised Dealer. mode and the engine will stop automatically at
upcoming vehicle idling condition.
7. ‘TVS intelliGO’ ( )
Once the vehicle enters the idling condition, the
Fuel is consumed unnecessarily when the engine is
intelliGO indicator starts blinking instead of glowing
in idling (e.g. In traffic signals) as there is no useful
and the engine stops after predetermined time.
output to the wheel. It contributes to emission and
decreases mileage of the vehicle considerably. Now, the intelliGO indicator starts glowing again
during the engine stop to indicate you that the
To overcome this issue ‘TVS intelliGO’ system is
vehicles has been stopped due to ‘intelliGO’ system.
introduced in TVS Jupiter 125 to automatically shut
down the engine when it is kept idling for long The vehicle stopped by ‘TVS intelliGO’ system
and restart from stop condition by simply pressing can be restarted at any time within 5 mins from
the Brake and performing Throttle operation (open the stop of the vehicle by intelliGO feature in a
and close). We recommend to use of this ‘TVS simple way of applying brake and open & closing
intelliGO’ system to improve the fuel economy throttle trigger.
and reduces emission. Deactivation of ‘intelliGO’ system:
Activation of ‘TVS intelliGO’ system: 1. ‘intelliGO‘ system will be deactivated if the
intelliGO switch is positioned at ‘ ’ position
‘TVS intelliGO’ system gets activated when the
or If the ISG malfunction indicator ‘ ’ or MIL
following requirements are satisfied,
indicator ‘ ’ is ‘ON’.
1. ‘TVS intelliGO’ switch is in ‘ ’ position

26
3. If the vehicle is not restarted within 5 mins rpm and the intelliGO switch is in ‘ ’ position,
from the idle stop condition. then the intelliGO will be activated.
4. During low battery condition the intelliGO system When ‘TVS intelliGO’ is enabled, the intelliGO lamp
will be deactivated. glows for 5 seconds and then blinks for predeter-
mined time and then the engine stops. The intelli-
GO lamp glows continuously once the vehicle has
Note stopped due to intelliGO system.
Ensure that the brake free play is adjusted and it is within 8. Economy and power indicators
the limit for the proper working of ‘TVS intelliGO’.
Eco indicator (green lamp) indicates that the vehicle
Vehicle can be started at any point of time using ‘electric is running in economy mode which gives better fuel
start’ when the engine is stall condition and the ignition economy.
key in ‘ON’ condition. Power indicator (amber lamp) indicates that the
‘TVS intelliGO’ switch can be activated / deactivated at
vehicle is running in power mode which results in
any point of time. reduced fuel economy.

If vehicle is stopped by ‘TVS intelliGO’ system, and the Note

‘TVS intelliGO’ switch is toggled from ‘ON’ to ‘OFF‘ Always ride the vehicle in ‘Economy mode’ for better
postion and back to ‘ON’ postion, the intelliGO system fuel efficiency.
will be deactivated and the vehicle can be restarted only
by the ‘electric start‘. If the battery voltage is very low, ‘Power mode’ lamp
will glow once you switch ‘ON’ the ignition key. Electric
starter will not work in this condition. Contact TVS Motor
Company Authorised Main Dealer / Authorised Dealer.

27
27
10. Turn signal indicator lamp right ( ) in ‘ODO’ mode to know the reading.
Flashes when the right side turn signal indication is
activated. ODO
km
Caution
Minimum 1.5 liter of fuel should be maintained in
11b. Trip meter
the fuel tank to avoid engine switch OFF / damage
to fuel pump which leads to replacement of pump In ODO mode, press ‘Mode’ switch once or twice to
without warranty. enter ‘TRIP A’ or ‘TRIP B’ meters respectively.

** ‘LFI’ is not a mileage calculating medium and it should

not be used for measurement of fuel consumption TRIP
A km

11. Multi function display

TRIP
B km
DTE
AFE
IFE km l Trip meter registers and displays the partial distance
covered in kilometers. The digit after the dot mark
ODO denotes one tenth of a kilometer. Set the display in
TRIP
ABF km ‘TRIP A’ or ‘TRIP B’ mode to know the reading.

28
Trip F* and Set’ switch operation.
11c. Helmet icon
TRIP With every ignition ‘ON’, Helmet icon ’ ‘ blinks
F km for 10 seconds on the left side of the multi function
display to alert you to wear a safety helmet.
This function shows the distance traveled after
the low fuel indication ‘ ’ is turned ‘ON’. The last 11d. Fuel level indicator (fuel gauge)
segment of the fuel level indicator starts blinking Digital bars indicates the approximate fuel quantity
while the ‘Trip F’ function is ‘ON’. available in fuel tank. There are six bars to indicate the
‘Trip F’ will activate once the low fuel indication is fuel quantity available in the tank. All the six bars will
‘ON’ and starts counting from 0.0 km. If the fuel level be displayed when the fuel in the tank reaches above
remains in minimum safe (reserve) level, the reading 5.1 liters approx.
will be saved even after the ignition ‘OFF’.
The ‘Trip F’ meter stops counting and display move
to ‘ODO’ once the fuel is filled above minimum safe
level (reserve level) which is indicated by at least
2 bars in the fuel level indicator.
Please remember that the ‘Trip F’ meter cannot
be activated or deactivated manually and can’t be
Note
reset.
Please note that, the fuel level indicator is not a mileage
calculating medium and it should not be used for
* ‘TRIP F’ can be accessed incase of low fuel only. calculating the mileage.

29
29
 when the low battery indication is ‘ON’. ’intelliGO‘
feature will be disabled.

11f. Service reminder

If the service is due, whenever the ignition switch
When The fuel reaches minimum safe level (1.35 liter is turned ‘ON’, an icon with spanner symbol ‘ ’
approx.), the last bar of the fuel gauge starts blinking, blinks for 10 seconds after the self-test cycle of
low fuel indicator ( ) starts glowing and ‘Trip F’ speedometer and continues to glow till the vehicle
meter starts counting from 0.0 km as explained in is serviced and reset. Get the vehicle serviced at TVS
the previous page. Fill fuel immediately. Motor Company Authorised Main Dealer / Authorised
Dealer.
11g. Digital clock
Indicates the time in 12 hour time format.

11e. Low battery indicator

Note
An icon with battery symbol ’ ‘ glows when the
battery charge is too low. Contact your nearest TVS Service reminder indicator lamp works only based on
Motor Company Authorised Main Dealer / Authorised the distance (km) covered by the vehicle. This is only a
Dealer. reminder indicator. Customers are advised to keep track
and follow the service schedule.

30
tank.
DTE
km
11i. Average fuel efficiency (AFE)*
Display approximate Average Fuel Economy since
AFE is reset.

AFE
km l

11j. Instantaneous fuel efficiency (IFE)

Display the current fuel economy of the vehicle if the
speed is above 10 kmph.

IFE km l
Note
If any of the features is displayed as ‘- - Km/l’ or ‘- - Km’,
contact TVS Motor Company Authorised Main Dealer /
Authorised Dealer. * Subjected to vehicle driving condition

31
31
 LOWER ODO
SEGMENT TRIP
ABF km

The sequence of Mode switch operation to change

between various function is shown below:

ODO
CLOCK TRIP A

The multifunction display of the speedometer has ##

various functions like ‘ODO’, ‘TRIP A’, ‘TRIP B’, DTE TRIP B
‘TRIP F#’, ‘DTE##‘, ‘AFE’, ‘IFE’ and ‘CLOCK’.
These functions are displayed in two segments
named upper and lower segments of the multifunction AFE TRIP F
#

display.
The upper segment consists of ‘DTE##’, ‘AFE’, ‘IFE’ IFE
and ‘CLOCK’. #
‘TRIP F’ can be accessed only when the low fuel indicator is
The lower segment consists of ‘ODO’, ‘TRIP A’, ON.
‘TRIP B’ and ‘TRIP F#’. ##
‘DTE’ cannot be accessed when fuel in the tank is in full
condition or in reserved condition.

32
only CLOCK will be displayed at the upper segment of Mode button once to enter ‘Clock’.
the multifunction display. Digital clock setting
Similarly, when the display in upper segment is in ‘DTE / • Ensure that the upper segment of multifunction
AFE / IFE / CLOCK’ mode, only ODO will be displayed in display is in ‘CLOCK’ mode and lower segment of
lower segment of the multifunction display. multi function display is in ‘ODO’ mode.
• Long press the ‘Set’ switch to enter the clock
Setting the digital display setting mode. Once the clock enters its setting
Turn on the ignition. mode, the hour digits of the clock starts blinking.
1. When the display is in ‘ODO’ mode, press the • Press the ‘Mode’ switch to increase the hours
Mode button once or twice to enter Trip A while the hour digits are blinking.
‘TRIP
A k m’ or Trip B ‘
TRIP
B k m ’ respectively.
• On pressing the ‘Set’ button again the hours gets
• To reset any of the trip value, press and hold set and the minute digits starts blinking.
the Set button for a few seconds while the • Now, press the ‘Mode’ button to increase the
display is in ‘TRIP A’ or ‘TRIP B’ respectively. minutes while minute digits are blinking.
2. When the display is in ‘Trip B’ mode, press the • Once again press the ‘Set’ button so the minutes
Mode button once to enter IFE ‘IFE ’. of the clock is set and the hours format ‘AM’ or
3. When the display is in ‘IFE’ mode, press the
km l
‘PM’ starts blinking.
Mode button once to enter AFE ‘ AFE ’. • Press the ‘Mode’ button to change the hour
format either to set ‘AM’ or ‘PM’.
km l
• To reset the AFE while ensuring the display
is in ‘ AFE • Press the ‘Set’ button once again to set clock.
k m l ’ , press and hold the Set
button for a few seconds.

33
33
head lamp beam (high / low) can be controlled by by 2. Turn signal lamp switch
changing the beam control switch position to ‘Low’
Slide the turn signal lamp switch to the left ‘ ’
or ‘High’ beam.
or right side ‘ ’ to operate respective turn signal
lamps (LH / RH). Press the switch to turn ‘OFF’.

3 4 5

2 1

Warning
Always use the appropriate turn signal lamps when you
intend to change lanes or take turns. Be sure to switch
‘OFF’ it after negotiating the lanes or turns.

34
towards the handle grip. / low) can be controlled by pressing the ‘high /
SBT technology helps to operate both front and rear low beam‘ switch.
brakes by distributing the force optimally between Press the switch towards ‘ ’ to operate head lamp
the two braking system. high beam or press it towards ‘ ’ to operate head
4. Parking brake (rear brake lock lever) lamp low beam.
Brake lock protects your scooter from rolling-off, TVS Jupiter 125 has a combined switch for head lamp
when parked on side stand (or) helps you relax while ‘high / low beam’ and ’pass-by’ operation. To operate
waiting in a long traffic signal (or) a slope. the pass-by, keep the switch in low beam positionand
To activate brake lock, press the brake lever almost and gently press & release the switch. This makes
half towards the grip and hold, then press the parking the head lamp high beam to flash and signal the
brake lever to the maximum and release the brake approaching vehicle. The pass-by signal can be used
lever slowly. Ensure the brake is locked properly. while overtaking during day time.
Pressing the brake lever further releases the brake
lock automatically. Warning
Use appropriate head lamp beam ‘high / low’ as per
Warning the traffic and road conditions for your safety and
Since your vehicle is fitted with SBT brake system it is to avoid inconvenience to other riders. It is strongly
essential to maintain the brake system in good condition. recommended to ride the vehicle in ‘low beam’ during
Adjust the brakes system at regular intervals for the day.
proper working of SBT.
Ensure to release the brake lock before riding the vehicle.

35
35
 1 grip. The brake lamp glows on application of either
right hand or left hand brake lever.
3. Throttle grip
Engine speed is controlled by the rotation of the
throttle grip. Twist it towards you to increase the
engine speed and twist it away from you or release it
to decrease the engine speed.
4 4. Electric starter switch
Press the starter switch ‘ ’ to start the engine
electrically along with the application of either of the
1. ‘TVS intelliGO’ switch brake and side stand in retracted condition.
To activate the ‘TVS intelliGO’ system, set the intelliGo
switch to ‘ ’ position. The intelliGo indicator ’ ’ of
the speedometer glows for 2 seconds on activation
Caution
of intelliGo system. It is not recommended to add any additional throttle grip
To deactivate ‘TVS intelliGO’ system, set the intelliGo (cover).
switch to ‘ ’ position.

Note
Refer page No. 26 for intelliGo feature details.

36
To open the fuel tank cap, follow the procedure given neck while refueling.
in the page No. 24. To close the cap, gently press Whenever refueling the scooter, fill only the recommened
the cap in its position and ensure locking by hearing quantity of fuel.
‘Click’ sound.
While refueling, avoid spillage of petrol on the tyre. If
fuel spills on tyre, the tyre will loose its grip on the road.
Ensure to close fuel tank cap without fail to avoid fuel
spillage.

Warning
Never refill fuel near open flame. Do not smoke while
refueling. Do not use cell phones while refueling.

Note
While closing the fuel tank cap press at the dotted mark
area of the cap for easy closing.

** The fuel tank is not a measuring instrument and the capacity

of the fuel tank may slightly vary from the indicated capacity.

37
37
spring loaded lever arm (stand extension) (2) to it stops.
increase the lever ratio, which enables parking on
centre stand effortlessly and very conveniently.
To place the vehicle on centre stand, hold the handle
bar left grip with left hand. Place your foot firmly on
the centre stand extension (2) and press.

1
Note
2
If the side stand is deployed before starting the vehicle,
the vehicle will not get started. And if the side stand is
deployed with the engine running condition, the engine
gets of automatically to ensure the safety.
If there is a error in the side stand sensor the indication
Caution will blink and the vehicle will not start. In such condition,
Never sit on vehicle when it is supported by stands. please visit the nearest TVS Motor Company Limited
Always park the vehicle on a flat, firm surface. Authorised Main Dealer / Authorised Dealer.

38
kit is supplied along with the vehicle and it is located Combination screw driver bit
below the seat base. To access the tool kit, seat need Screw driver handle
to be opened. Follow the procedure given in the page
Tool bag
No. 24 for the seat opening procedure.

Warning
Do not remove the tool kit and first aid kit from the
vehicle. Always ensure to keep them along with the
vehicle. Ensure the first aid equipments are changed
periodically based on the date of expiry.

Caution
It is recommended to use the tool kit in case of any
emergency only. It is always advisable to take your
vehicle to TVS Motor Company Authorised Main Dealer
/ Authorised Dealer.

39
39
No. 24 to access the utility box. Do not carry perishable items inside the utility box. It is
not fully sealed. Do not allow / spray water to get inside
the utility box. Take care not to spill petrol or oil into the
utility box.
Do not keep heat-sensitive items inside as it may get
hot on long rides. Do not keep valuable items inside
the utility box when leaving the vehicle unattended.

Warning
Operating the TVS Jupiter 125 overloaded will hamper
the riding stability and may lead to loss of control.
Hence, it is advisable to carry the recommended amount
of load only.

40
your mobiles while charging or hold a small bottle. 3 kg. One hook is located below handle bar on the
rear panel.
Just pull out the hook from the top (A) to hang your
luggage. Push back the hook once it is free.
Similarly, the other one is located on the cover front
below front end of the seat assembly. Pull out the
hook from its position. Open the top lid and hang
your cargos. Lid will get close automatically. Push
back the hook to its original position once it is free.

A
Warning
Ensure that your mobile or any material stored is safely
held with in the glove box front while riding your TVS
Jupiter 125.
Also recommended not to keep your belongings when
the vehicle is parked unattended.

41
41
hangs out of your scooter. Please note that the luggage
attached to your scooter should not interfere your feet
movement.

SMART PHONE CHARGER*

This smart phone charging socket enables you to
charge your smart phone when you are traveling.
This socket is located below the handle at right side of
the vehicle. Please go through the operating manual
of the mobile phone and use a suitable USB cable DON‘Ts
recommended by the mobile phone manufacturer for 1. Do not leave the USB charging flap open / partially
that particular model. Please follow the guidelines closed.
provided for the proper usage of the socket:
2. Do not attempt to use / charge any other device,
DO‘s other than one mobile phone at a given time.
1. Ensure that no water enters into the socket by 3. Do not try to force the USB connector in, check
closing the USB flap properly. if it is inserted in the appropriate direction, to
2. Use only mobile phone company‘s authorized prevent damage.
USB cable for mobile charging. 4. Do not charge your mobile when the engine is in
3. Do make sure the flap is not damaged while ‘OFF’ condition.
opening / inserting the USB cable. 5. Do not use other device, this port is for charging
mobile phones only.
* Mandatory and optional accessory will be charged extra

42
protect it from any liquid, dust etc. seat is opened and gets ‘OFF’ when the seat closed
The charging time of the mobile may vary, depending on automatically.
the mobile battery‘s state of charge.
The flap in the unit has been designed to prevent water Note
entry and it is not replaceable. No warranty for charger Ensure that the seat is fully closed to avoid battery drain
incase of flap damage. due to continuous glowing of utility box light.

UTILITY BOX LIGHT*

* Mandatory and optional accessory will be charged extra

43
43
 Engine oil Availability of oil upto the level (page no. 57)
Transmission oil Availability of oil upto the level (page no. 58)
Fuel Enough fuel for the planned distance of running
Tyres Correct pressure (page no. 66)
Adequate tread depth / No cracks or cuts.
Battery Proper working of electric starter, horn, fuel gauge, pass-by, brake lamp, tail lamp,
speedo back illumination, license plate lamp and turn signal lamps.
Lighting Proper working of head lamp high / low beam and high beam indicator
Steering Smooth movement / No play or looseness
Throttle Correct free play of cable / Smooth operation
Brakes Availability of brake fluid upto the level (page no. 59)
Correct front and rear brake lever play (page no. 60 & 63)
Wheels Free rotation
Malfunction indicator Turned OFF after the engine is started (page no. 25)
ISG malfunction indicator Turned OFF after the Ignition ‘ON’ and engine is started (page no. 26)

Caution
Do not switch ‘ON’ the ignition without minimum level fuel in tank. It will cause damage to the fuel pump.

44
 forward suddenly and lead to loss of control.
and turn it to the ‘ON’ position. In side side retracted
condition, apply any one of the brake and press the Reduce speed to a safe limit before turning / cornering.
electric starter switch to start the vehicle. Do not apply brake while turning / cornering.
Press the start button (one touch noiseless start)
without applying the throttle. As soon as the engine
Caution
starts, release the start button. The engine will not
start if the throttle is opened. Do not open excessive throttle when the vehicle is
parked. It leads to overheating of engine and damage to
Setting the vehicle in motion
the internal components.
1. Twist the throttle grip slowly towards you and
simultaneously release the brake lever gently and
smoothly. The vehicle will start moving forward.
2. As the vehicle picks up speed, increase the
throttle slowly.
Stopping and parking
1. Close the throttle completely and apply both the
brakes simultaneously.
2. Turn the ignition ‘OFF’.
3. Park the vehicle on a firm, flat surface.
4. Lock the steering and take out the control key.

45
45
volume can be used. from the reputed and reliable fuel stations.
Higher ethanol content in petrol can lead to
CHECKS AND TIPS FOR IMPROVING FUEL
• degrade plastic and rubber components of
ECONOMY
fuel system and vehicle parts
Regular checks
• cause corrosion damage to metal parts like
Carry out the periodic maintenance checks as
fuel tank, etc
specified in this manual (page no. 49).
• result in startability & drivability issues Regular maintenance checks will save fuel and
• decrease fuel economy ensure trouble-free, enjoyable and safe riding besides
Ethanol absorbs water very easily, resulting fuel keeping environment clean.
separation. Extra care shall be taken to prevent Spark plug
moisture entry into fuel tank while filling ethanol A dirty or defective spark plug leads to wastage of
blended petrol and water washing of vehicle. fuel due to incomplete combustion. Inspect and
Painted parts (viz. panels, covers) shall not come in clean the spark plug only if necessary. Replace the
contact with ethanol blended fuels. spark plug every 12000 kms (1 year). Always use
Manufacturer is not responsible for any warranty recommended spark plug only.
issues that results from using ethanol blend in excess Air cleaner element
of 20% by volume in petrol. A dirty air cleaner element restricts airflow and
In case of any abnormalities observed due to use of increases fuel consumption. Replace the element
ethanol blended fuels, customers are advised to use every 12000 kms.
a different fuel station / brand for standard E20 fuel or Since paper filter is used in your scooter it is not
contact authorised service centres. recommended to clean the filter. Replace the filter
incase of any abnormalities.

46
life, thereby increases the fuel consumption. the permissible limit.
Running with low transmission oil will cause damage Wheel freeness
to the gears and bearings. Regularly inspect the Inspect and ensure the wheel freeness by rotating
engine oil and the transmission oil for correct level the wheel at least once in a week to avoid wastage
and top-up if necessary. Get it replaced at regular of fuel.
intervals as per the maintenance schedule. Avoid frequent braking
Fuel leak Anticipate corners and slopes as well as the traffic
Inspect and arrest fuel leaks if any from tank and fuel conditions. Unnecessary and frequent braking will
lines. Loss of fuel due to leak may drain the fuel tank reduce the fuel economy. Never accelerate and
completely. apply brake simultaneously. It leads clutch shoes
Evaporation wear and wastage of fuel.
Vehicle parked in the hot sun leads to wastage of fuel
through evaporation. Also, lower fuel levels in the tank
will have increased evaporation and condensation of Note
moisture inside. Ensure to close fuel tank cap after The on-road mileage of TVS Jupiter 125 is dependent on
every filling. If the fuel tank cap kept open for long several factors like road condition, quality of fuel, riding
time, it leads to safety issues and fuel loss. speed, operation of brake, tyre inflation, maintenance /
Tyres timely servicing of vehicle, load etc. and hence will differ
from the mileage given under standard test conditions
Low tyre pressure has adverse effect on the vehicle.
such as made in recognised institutes.
The drag on the vehicle increases resulting in
decreased fuel economy. Further more, handling may
be adversely affected.

47
47
will result in rapid wear and severe damage to the vehicle. If the vehicle is used under high stress conditions such
as continuous full throttle operation or if used / operated in dusty climate, certain jobs should be performed more
often to ensure reliability of the vehicle. Cylinder head, steering components, suspension and wheel components
etc., are key items and require very special and careful servicing. TVS Motor Company Limited strongly recommends
that the jobs as per the maintenance schedule be performed by your TVS Motor Company Authorised Main Dealer /
Authorised Dealer.
Periodic inspections may reveal one or more parts that may need replacement. Whenever replacing parts on TVS
Jupiter 125, it is recommended that you use only the TVS Motor Company Genuine parts.

Caution
Proper running-in and maintenance are mandatory for making certain that your vehicle is reliable and gives optimum
performance at all times. Make sure that the periodic maintenance is performed thoroughly in accordance with the
instructions given in this owner’s manual.
In more dusty areas, the air filter element requires early replacement than the mentioned kilometers to avoid costly damages
to the engine.

48
 SERVICE
RIDE REMARKS
SERVICE 1st 2nd 3rd Every
CHECK
km 500 ~ 750 5500 ~ 6000 11500 ~ 12000 6000 km /
PERIOD FROM DATE OF SALE 30 ~ 60 days 6 months 12 months 6 months
ITEMS ACTIVITY
Engine oil / Oil filter (strainer) Replace or Inspect and top-up – R/C R/C R/C R/C Clean strainer
Transmission oil Replace or Inspect and top-up – – – – – Replace every 24000 km
Inspect and clean if
Spark plug Inspect and clean or Replace – I – R – required. Replace every
12000 km
Air cleaner element Replace – – – R – Replace every 12000 km
Inspect for any abnormal
Tappet clearance Inspect and adjust – I I&A I&A I&A noise, starting trouble and
adjust if required
Drive belt, CVT rollers and clutch Replace
Replace – – – – –
shoe every 24000 km
Cover variator Inspect, clean and lubricate – – I, C & L I, C & L I, C & L
Front and rear suspension Inspect for proper functioning – – I I I
Evaporative emission control
Inspect – – – – – Every 18000 km
system
Inspect, clean, lubricate and
Throttle cable / grip – – I, C, L & A I, C, L & A I, C, L & A
adjust
All fasteners Inspect and tighten – I I I I Tighten if required

Steering smooth operation / play Inspect, adjust and lubricate Inspect and adjust
– – – I&A –
Lubricate if required

Contd...

49
49
 CHECK
km 500 ~ 750 5500 ~ 6000 11500 ~ 12000 6000 km /
PERIOD FROM DATE OF SALE 30 ~ 60 days 6 months 12 months 6 months
ITEMS ACTIVITY
All bulbs, horn and switches
Inspect for proper functioning – – I I I
working
Head lamp beam (focus) Inspect and adjust I – I I I Adjust if required
Battery Voltage (recharge if Through dignostic tool or
Inspect – – I I I
required) at battery terminal
Inspect, adjust & lubricate at
Brake effectiveness / play I I, L & A I, L & A I, L & A I, L & A
cable ends
At 6000 km and every
Brake cam Clean and lubricate – – C&L – – 18000 km thereafter if
necessary
Set tyre pressure if
Wheels / Tires Inspect I – I I I
required
Replace at 21000 km or
Brake fluid# Replace or Inspect and top-up I – I I I 2 years whichever occurs
earlier
Brake hose# Replace or inspect – I I I
Master cylinder cups# Replace – – – – Replace at 18000 km
Disc brake SBT cable play# Inspect and adjust I I&A I&A I&A I&A
Connect ride scan
tool if MIL glows in
MIL codes Inspect I – I I I
speedometer
Check and clear DTCs

#
R - Replace; I - Inspect; T - Top up; C - Clean; A - Adjust; L - Lubricate; TI - Tighten Applicable only for Disc Brake version

50
Engine oil 700 ml TVS Motor Company TVS TRU4 SKUUTA oil
(SAE 10W30 API-SL, JASO MB)

Transmission oil 120 ml -do- -do-

Front fork oil 92 ± 1 ml / leg IOC Gabriel Premium front fork oil

Disc brake fluid #

– TVS Girling DOT 3 / DOT 4

Grease – Bharat petroleum MP Grease No. 3

IOC Servo Gem No. 3
Bechem Bechem Premium grade 3
Kluber Lubrication Kluber Centoplex 2

#
Applicable only for Disc Brake version

51
51
front panel. This panel must be removed to access long life, follow the steps given below:
the battery. Follow the procedure for front panel Check the battery voltage as per the schedule. If the
removal: voltage is less than 12.4 volts, charge the battery
1. Remove the front panel mounting screws shown using recommended MF battery charger at TVS
in the figure (2 nos.). Motor Company Authorised Main Dealer / Authorised
Dealer.
2. Gently pull out the front panel by dislocating
1. Adding any additional electrical accessories other
its lugs while taking care not to damage the
than TVS Motor Company Limited recommended
mounting lugs.
ones, may lead to disqualification of warranty
3. During reassembly reverse the removal
covergage.
procedure.

52
 battery. battery continues to discharge and if left unattended
3. Petroleum jelly must be applied at terminals to can get completely discharged. It is recommended to
prevent it from corrosion. ride the vehicle for minimum 60 km every week to
4. lncase of any abnormality or for removal of battery keep the battery in healthy condition. This could be at
from the vehicle, contact TVS Motor Company
a stretch in one ride or several rides during the week
Authorised Main Dealer / Authorised Dealer.
The vehicle speed will vary during the ride but an
average speed of minimum 30 kmph will be helpful
Caution to ensure proper battery charging. Use kick-starting,
if available, to conserve battery charge during such
Never check the battery charge by shorting the terminals.
period. This is only a recommendation to maintain
Always connect the positive terminal first (red wire) and battery charge and regular service schedules must
then negative (black wire) to avoid sparking. be followed to maintain your vehicle in good running
condition.
The inversion of the battery wires can damage the
battery and the electrical system. The following is recommendations to users regarding
battery maintenance before, during and after long
storage of battery:
1. Before storage
a. Store the battery only after fully charging it.
b. Battery fuse to be disconnected and stored
safely. This will reduce the sleep mode current
and hence enhance storage life of battery.#
#
To be done by skilled personnel

53
53
 with battery terminals.# result in irreparable damage to the battery or
2. During storage the vehicle.
a. Store it at room temperature or lower.
b. Store the vehicle in the shade and protected Warning
from rain and cover the vehicle to prevent Battery develop explosive gases. Keep it away from
rodents from entering and damaging the heat sources. If charging is required the battery must be
wires. charged in well ventilated area.
3. After storage
Unusable battery must be disposed in environment
a. Connect the wires and fuse, if disconnected friendly manner. Do not discard it with household
earlier, with ignition switch in OFF position* thrash. Handover the battery to the battery dealers or to
b. Start the vehicle by kick starting (if available). a recycle center that accept used battery.
(Above recommendations do not consider storage
effects on other systems such as induction and fuel
systems and wheels). Caution
Periodic maintenance of Batteries: Never operate the vehicle with discharged battery as it
• Keep top of battery clean. may damage electrical components.
• Check cables, clamps, and case for obvious Do not push start the vehicle, use a good battery to start
damage or loose connections. the vehicle.
• Clean terminals and connectors as necessary.
Recharge battery if voltage is below 12.4
Volts. #
To be done by skilled personnel

54
electrical system are the main causes for fuse failure. the fuse case itself).
There are two fuse cases containing one blade type 6. Close the fuse case and re-fix it into the battery
fuse (15A) and two mini fuses (15A & 10A) located box.
near the battery. Follow the procedure given below 7. Turn ‘ON’ the ignition switch and check for proper
for inspecting and replacing the fuse. functioning of electrical systems. Incase the
1. Turn ‘OFF’ the ignition. fuse fails again, consult the nearest TVS Motor
2. Remove the front panel as explained earlier. Company Authorised Main Dealer / Authorised
3. Take out the fuse cases located near from the Dealer.
battery one by one. Good Fuse Blown Fuse
4. Open the fuse cases and take out the fuse.

Caution
Do not use the vehicle by shorting the wires without
fuse. This may result in overheating of electrical items /
wiring and may result in fire. Do not use fuse of higher
amperage than specified for the safety of electrical
system.

55
55
front. A spark plug with heavy carbon deposits will not
1. Open the seat and remove the top mounting produce strong sparks. Hence, only if necessary,
screws (A) from both the sides of cover front. clean the carbon deposits from the spark plug with a
2. Remove the bottom mounting screws (B) of small wire brush or spark plug cleaning tool.
cover front. Inspect the spark plug electrodes (A) and (B) for
3. Gently pull out the cover front by dislocating its any corrosion. If found any, replace the spark plug
lugs. with a new. Inspect the spark plug gap visually
(1.0 ~ 1.1 mm). If found more, replace the spark plug
4. Clean the dust and mud around the spark plug
with a new one.
mounting to avoid falling inside the cylinder.

A
B
B A 1.0 ~ 1.1 mm

56
Do not over tight or corss thread the spark plug. After Wipe-off the surroundings of gauge oil level.
reassembling the plug fix bakc the suppressor cap 2. Remove the gauge and wipe it clean.
and ensure its proper fitment.
3. Fix the gauge back to its mounting hole. Do not
thread in.
Caution 4. Take out the gauge and check the oil level. The
level should be between minimum and maximum
Always use only recommended make and type of spark
level marks of the gauge (shown in the figure).
plug. Replace spark plug every 12000 km.
5. If the oil is less than the minimum level, add ‘TVS
Don’t remove the spark plug when the engine is hot. TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO
Cover the spark plug hole with a clean cloth when the MB)’ upto the maximum level mark.
plug is removed, to prevent dust / water entry.
It is advisable to tight the new spark plug by hand till the
end and then loose. Again re-tight the spark plug by 1/8 Maximum
of rotation after sealing by using only the hand tool.
Since the hook type spark plug is used, it is not advised
to adjust the plug electrodes as it may damage the
electrodes.

Minimum

57
57
TRANSMISSION OIL - LEVEL JASO MB)’ till the oil just starts to flow out from
the oil level hole.
Check the transmission oil level periodically. To check
5. Wipe out the oil traces with a clean cloth to
the transmission oil level follow the procedure given
prevent dust accumulation.
below:
6. Inspect the condition washer while reassembling
1. Place the vehicle on centre stand on a flat surface.
the oil level screw. Replace if required.
2. Wipe-off the surroundings of oil level screw.
3. Remove the transmission oil level screw along
Caution
with a gasket from the rear end of crankcase L.
If the vehicle is driven with less engine oil and
transmission oil, the engine components will be severely
damaged.
Check the oil level between the services to avoid costly
damage. Do not fill excess oil it may cause oil leak.
Always use TVS TRU4 SKUUTA oil (SAE 10W30 API-SL,
JASO MB) only.

58
 right side of the handle bar under the head lamp the ‘MIN’ mark (B) provided on the view piece
housing. glass of the master cylinder when the cylinder is
2. A caliper assembly (2) fitted to the fork leg L, a parallel to ground.
disc (3) on the front wheel and a high pressure
hose (4) connecting the master cylinder and the
caliper assembly.

4 B A

3
Warning
Since the vehicle is fitted disc brake SBS system, if there
is any abnormality in brake performance, contact TVS
Motor Company Authorised Main Dealer / Authorised
Dealer.

59
59
 rattling play is observed in both the brake levers, 2. The free play of the brake lever before the
contact TVS Motor Company Authorised Main engagement of brake should be between
Dealer / Authorised Dealer for topping-up the 15 ~ 20 mm.
brake fluid, air bleeding and other brake related
3. Turn the adjuster nut at the bottom side (1) in
inspections.
the slot marked as ‘I’ in clockwise direction
Brake pad wear indicator for reducing the free play or in anti-clockwise
Check for the wear of brake pads visually. If the brake direction for increasing the free play.
pads wear is found beyond the wear indicator groove
as shown in the figure, replace the brake pads as a
set with a new one.
15 ~ 20 mm

Wear Limit

60
 between the bullet top (3) and the slot top (4).

S
S
I
Clearance
1 I
2 S

4. After obtaining the necessary free play, inspect 1

for the clearance between the bullet (3) and slot
end (4) marked as ‘S’ as shown in the figure. 5 6

Clearance

2 6. After adjusting the adjuster nut top, If any

S clearance is observed in between the bullet
I
bottom (5) and the slot bottom (6) marked as
1 ‘I’ as shown, then turn the adjuster nut (2) in
3 4 anti-clockwise until there is no clearance.
7. Once again check and confirm the brake play at
the lever end.

61
61
Braking Technology (SBT) adjust the brakes with
additional care. If not it may result in brakes not
working properly. Please contact TVS Motor Company Caution
Authorised Main Dealer / Authorised Dealer for further
assistance. Replace the brake shoes as a set, if the wear limit
indicator shows beyond the wear limit even after
indexing the lever.
Front brake shoe wear indicator
When the brake is applied, wear limit index mark (1)
on the front brake cam should be within the wear
limit indicator (2) on the front brake panel.

62
2. Free play of the brake lever before the engagement 4. Turn the adjuster nut in clockwise direction for
of brake should be between 10 ~ 15 mm. reducing free play or in anti-clockwise direction
for increasing the free play.

10 ~ 15 mm

Warning
Check the front brake and the rear brake play periodically
Note band adjust if required. However the brake play needs to
Please remember that the rear brake lever free play be adjusted more frequently depending upon the usage.
adjustment to be done only after adjusting the front
brake lever play (in drum brake model).

63
63
within the wear limit indicator (2) on the crankcase
LH.
In case the wear limit indication pointer (1) is going
beyond wear limit indicator (2), index the lever to next
slot with the help of Dealers to extend shoe life.

Caution
Replace the brake shoes as a set, if the wear limit
indicator shows beyond the wear limit even after
indexing the lever.

64
There are 3 notches for adjusting spring load.
If the spring is adjusted to the minimum notch, then
the shock absorber will be softer which is good for
light loads. If the spring is adjusted to maximum
notch, then it will be stiffer which is good for heavy
loads.

HARD SOFT

Adjust the spring pre-load by shifting the adjuster

to the required notch according to the different load
conditions. The more you compress the spring, the
suspension becomes more stiff.

65
65
not more frequently. Insufficient air pressure in the
tyres not only hasten the tyre wear, but also seriously A
affects the stability of the vehicle.

TWI
Under inflated tyres make smooth cornering difficult
and over inflated tyres decreases the tyre contact
with the ground which can lead to skidding and loss
of control.
Be sure that the tyre pressure is within the specified
limit at all times.
Tyre rotation direction
Tyre pressure in cold condition:
While reassembling the tyres, after removing from
Solo Dual the wheel rim, ensure that the arrow mark is facing
the direction of wheel rotation while fixing the tyre
Front 1.68 kg/cm² (24 PSI) 1.68 kg/cm² (24 PSI)
on the wheel rim.
Rear 2.25 kg/cm² (32 PSI) 2.53 kg/cm² (36 PSI) Tyre puncture
Your scooter is fitted with a tubeless tyre on both
Tyre tread condition front and rear wheel. Incase of any puncture /
Operating the vehicle with excessively worn tyres tyre damage, it is advised to visit the nearest tyre
will decrease riding stability and can lead to loss of manufacturer Dealer or the tyre repair shops who
control. It is recommended to replace the tyre when knows the repairing method of tubeless tyre.
the tyre wears off to the tyre wear indicator level It is not necessary to remove the tyre from wheel rim
(indicated by TWI (A) on the tyre). always to attend a puncture.

66
If at all, tyre levers needs to be used, the levers
should be free from sharp edges. Care should be
taken not to damage the tyres and rims.

Warning
The tyre inflation pressure in cold condition and the
tyre tread condition are extremely important for the
performance and safety of the rider. Check the tyres
frequently for inflation pressure as well as the wear
pattern on it.
Use of a tyre other than the standard may cause
instability.

Caution
The side walls of the tubeless tyre which in contact with
the wheel rim are only seals the air inside the wheel
assembly. Hence care should be taken not to damage
the side walls of the tyres during removal / reassembly.

67
67
 R T

Within Within
1 km 5 km

Note
If vehicle is in hold condition for long time
• Need movement of vehicle to avoid particular spot of tyre not to touch the ground for more than week time.
• Inflation pressure should check on cold condition maximum travel time should not exceed more than 1 km.
• Weekly basis inflation pressure check helps to improve 10% of tread life & fuel efficiency.

68
 both sides of the wheel (incase of disc bake) or mounting nut (A) along with a washer.
take out a spacer from the right side of the wheel
3. Slightly tilt the vehicle and take out the wheel
(incase of drum brake).
from the rear axle.
3. Place a support below the foot board to prevent
4. Reassemble the wheel in the reverse order of
the vehicle from falling and lift the vehicle up.
removal.
4. Dislocate the wheel disc from caliper assembly
and take out the wheel.
5. Reverse the procedure for reassembling. Ensure
the proper seating of wheel disc in the caliper
assembly during reassembly. Also ensure to fix
the right spacer at right location.

2
1 A

Warning
Always make sure, whenever the wheel is removed, the
axle nuts are tightened properly to the specified torque.

69
69
following steps: 7. Cover up the vehicle completely with a clean
1. Clean the vehicle thoroughly. Park the vehicle on tarpaulin or any other suitable cover.
centre stand. 8. Store the vehicle inside a garage or similar area
2. Warm up the engine and drain engine oil and to avoid damage due to dust and rain. Make sure
transmission oil. Store the oil, if new, in a dust that the storage area is well ventilated and free
free container. from any source of flame or spark.
3. Empty the fuel tank.
4. Remove the spark plug and feed in several drops
of engine oil through spark plug hole. Crank the
engine few times and reinstall the spark plug.
5. Remove the battery, store it away from direct
sunlight and freezing temperatures.

Caution
Do not park the vehicle on a slope or soft ground or else
it may fall down. The exhaust system becomes hot after
a run. Park the vehicle in a place where pedestrians or
children are not likely to touch the vehicle.
During storage, the battery must be recharged at
recommended charger if stored more than a month.

70
 thoroughly. the side stand and start the engine. Wait for few
2. Remount the battery after bench charging if seconds and ride out.
required.
3. Fill the engine oil (TVS TRU4 SKUUTA - SAE
10W30 API-SL, JASO MB oil) and check the oil
level using gauge oil level.
4. Fill the transmission oil (TVS TRU4 SKUUTA - SAE
10W30 API-SL, JASO MB oil) and check the oil
level at the oil level screw.
5. Lubricate the parts as instructed in the periodic
maintenance schedule.
6. Fill up fresh petrol in the fuel tank.
7. Check and inflate the tyres to the specified tyre
pressure.

Caution
Avoid using alkaline solution like detergent soaps for
washing. This may damage head lamp and other lamp
assemblies.

71
71
 emergency: 10. MIL & ISG lamps are not glowing.
1. Tool kit complete. 11. Lubrication of all items mentioned in the
2. Recommended spark plug one number. periodic maintenance schedule.
3. Turn signal lamp bulb one number. 12. Any other job as necessary.
4. Throttle, front# and rear brake cable each one. 13. Have your vehicle checked at any TVS
5. First aid kit. Motor Company Authorised Main Dealer or
B) Precautions to be taken for the journey: Authorised Dealer.
1. Ensure that the engine oil and transmission
oil are up to the level. Caution
2. Adequate fuel in the fuel tank.
Long journey are to be taken only after the running-in
C) Check your scooter for the following: period of 1000 km.
1. Tightness of all bolts and nuts with correct
torque value.
2. Fitness of tyres / tyre pressure / tread depth.
3. All bulbs, indicators and horn functioning.
4. Smooth functioning of all cables and their
free play.
5. Smoothness of steering operation.
6. Front / rear brake function and rear brake
lamp working. #
Applicable only for Drum Brake version

72
warranty is subject to other terms of warranty:
During 5 Years from the date of purchase or during the first 50,000 km of run for the vehicle in the hands of original
retail purchaser, whichever is earlier, the parts of the vehicle covered under warranty which prove to the satisfaction
of the Company to have a manufacturing defect will be repaired or replaced free of cost.
The Company’s obligation under this warranty is limited to repairing or replacing, free of cost, those parts of the
vehicle which upon examination by the Company may prove to the Company’s satisfaction to have a manufacturing
defect, and in such cases the Company’s decision either to repair or replace the affected parts will be final. In the
event of replacement of parts, the Company also reserves the right to use parts of the same brand as the affected
parts or any other brand which is used by the Company in the course of manufacture. All parts replaced under this
warranty will become the property of the Company and must be returned to the company.
Limitations of Warranty:
This warranty shall not apply to following condition:
1. Any natural wear and tear, including without limitation, aging.
2. Warranty claims on proprietary items such as tyres, tubes and batteries etc,. should be preferred by the user
directly on the respective manufacturer, as per their warranty terms and the Company shall not be liable in any
manner in respect to the same.
• Battery warranty for “MF type (Maintenance Free)” is applicable for a period of 21 months from the date
of charging or 18 months from the date of sale or 20,000 kms, whichever is earlier.
• Battery warranty for “Lead Acid type” is applicable for a period of 15 months from date of charging or
12 months from date of sale or 10000 kms whichever is earlier.
3. Parts repaired or replaced under this warranty are warranted only throughout the remainder of the original
warranty period.

73
73
6. The Company may make any modification or improvement to vehicles in future production at any time without
prior notice and without any obligation to install the same on vehicles previously dispatched for sale.
7. Any claim under this warranty will lie only when the customer:
• takes his vehicle to an Authorised Main Dealer / Authorised Dealer of the Company and reports the problem
he / she felt in the vehicle to enable the Authorised Main Dealer / Authorised Dealer to inspect the same and
assess the cause for the reported problems.
• produces to such Authorised Main Dealer / Authorised Dealer the owner’s manual for the concerned vehicle
for verification of relevant details.
8. This is the only warranty given by the Company for the TVS Jupiter 125. No employee, Dealer or other person is
authorised to extend or enlarge this warranty.

Warning
Modifications to this vehicle not approved by the TVS Motor Company may cause loss of performance and render it unsafe
for use and disqualifies for warranty coverage also.

Following Toll Free numbers can be contacted for battery related queries if any.
Incase of EXIDE battery, call :- 1800 103 5454 Incase of AMCO battery, call :- 1800 425 0096
Incase of TATA GREEN battery, call :- 1800 419 8888 Incase of AMARON battery, call :- 1800 425 5858
Following Toll Free numbers can be contacted for Tyre related queries if any.
Incase of TVS Srichakra, call :- 04522443300 Incase of JK tyre, call :- 18002581100
Incase of Maxxis tyre, call :- 1800 532 2888

74
 Normal Maintenance Operations Engine tune-up, decarbonizing, fuel system cleaning, oil changes, head light
focusing, fastener retightening, ignition timing, clutch and brakes as well as
other normal adjustments.
Wear and Tear Items Chain, sprockets, clutch and brake linings, fasteners, shims, washers, oil seals,
gaskets, ‘O’ rings and spokes etc.
Electrical Bulbs, fuse, AHO, DRL etc.
Service Maintenance Parts Oil filters, spark plug, air filter, oil and brake fluid
Rubber, Rexine and Plastic Items All hoses, pipes and plastic aesthetics
Proprietary Items Battery, tyres and tubes (the warranty terms are subject to our agreement with
proprietary OEM)
(Battery warranty for “MF type (Maintenance Free)” is applicable for a period
of 21 months from the date of charging or 18 months from the date of sale or
20,000 kms, whichever is earlier).
(Battery warranty for “Lead Acid type” is applicable for a period of 15 months
from date of charging or 12 months from date of sale or 10000 kms whichever
is earlier).
Parts of the vehicle getting affected due to atmospheric effect / environmental
factors (rusting, paint peel off etc.). However, depending on the vehicle usage
condition, warranty would be accepted up to 2 years from the date of purchase.
Others Factors Parts of the vehicle which have been tampered with, altered, repaired or
replaced by persons not authorised by the Company and which in the sole
judgement of the Company affect the performance of the vehicle.

75
75
 Parts which are used in conjunction with parts not made or recommended by
the Company.
Parts suffering damage or resultant damage by accident, misuse, negligent
treatment, use of bad quality lubricants or impure fuel or by omission to follow
the guidance and instructions contained in this owner’s manual.
Vehicles on which engine number or chassis number is deleted, defaced or
altered.
Vehicles on which any warranty service including scheduled paid service is
not availed when it falls due (at TVS Motor Company Authorised Main Dealer /
Authorised Dealer).
Vehicles sold or transferred by original retail purchaser.
Others Factors Vehicles used for racing or any competition or used otherwise than for ordinary
personal transportation.
Vehicles attached with side cars etc.
Vehicles which have been taken out of India.
Vehicles affected by natural calamities like flood, earthquake, tsunami, storm
etc,.
If the vehicle has been used for commercial purpose like taxi or used for rental
or hiring or any other purpose other than regular personal transportation.

76
For keeping the maintenance track of your vehicle, free and pay service record sheets are attached in the Service
Handbook given to you during the time of your vehicle purchase. Please have the relevant record sheet filled by the
Dealer who is carrying out the maintenance service.
For availing any of the nine warranty services, please take your vehicle and your Service Handbook to any of our
Authorised Main Dealers or any of our Authorised Dealer. After effecting the service the Authorised Main Dealer
or the Authorised Dealer will affix their stamp on the last column of free or pay service record sheet of Service
Handbook for your record and reference. An OTP would be sent to customer‘s registered mobile number. The same
to be shared with the servicing Dealer on or before vehicle delivery.
Periodic maintenance always helps good performance of an automobile and our services are planned to keep your TVS
Jupiter 125 performing good. Please note that carrying out the service for your vehicle at scheduled intervals
at any of the TVS Motor Company Authorised Main Dealer / Authorised Dealer is necessary for availing of
warranty. And please also remember that, after the services are over, periodic servicing of your vehicle at appropriate
intervals, depending upon its extent of use, will keep your vehicle at its best level of performance.
In case you need any clarification or assistance, please feel free to write to us mentioning the frame number, engine
number and date of purchase of your vehicle also the name and place of the Authorised Main Dealer / Authorised
Dealer from whom you bought the vehicle and getting it serviced.
Service Department
TVS MOTOR COMPANY LIMITED
P.O. Box No. 4, Harita, Hosur - 635 109,
TAMILNADU, INDIA.
Toll free no:- 1800-258-7111

77
77
 1 1st Service Free 500 ~ 750 30 ~ 60 days
2 2nd Service Free 5500 ~ 6000 6
3 3rd Service Free 11500 ~ 12000 12
4 4th Service Pay 17500 ~ 18000 18
5 5th Service Pay 23500 ~ 24000 24
6 6th Service Pay 29500 ~ 30000 30
7 7th Service Pay 35500 ~ 36000 36
8 8th Service Pay 41500 ~ 42000 42
9 9th Service Pay 47500 ~ 48000 48

Note
Free service enables the customer to avail the service at free of labour charges. Charges for the pay service should be
borne by the customer. Cost of engine oil, periodic maintenance parts, filter, brake fluids, all types of greases, petroleum
jelly, distilled water, chain cleaner, lubricants, coolants, cleaning cloths for both free and paid services are chargeable to the
customer.

* Please remember that, after the above schedule, periodic servicing of your vehicle at appropriate intervals, depending upon its extent of use,
will keep your vehicle at its best level of performance.

78
MANUFACTURER TVS Motor Company Limited
Village Bhatian, Bharatgarh Road,
Teh Nalagarh, Dist. Solan.
Himachal pradesh - 174 101, India
ENGINE
Type Single cylinder, 4 stroke, fuel injection, air cooled, spark ignition engine
Cylinder bore 53.5 mm
Stroke 55.5 mm
Piston displacement 124.76 cc
Compression ratio 10.3 ± 0.3 : 1
Air filter Dry paper filter element
Oil filter Wire mesh
Lubrication system Forced wet sump
Maximum power in kW 6.0 kW @ 6500 rpm
Maximum torque in Nm 10.5 Nm @ 4500 rpm
Maximum speed 84 km/h
Engine idling rpm 1450 ± 100 rpm (under warm condition)
Starting system Electric starter
Emission norms BS VI

79
79
Primary transmission CVT (Continuously Variable Transmission)
Primary reduction 2.58 to 0.8
Secondary reduction 9.08
CHASSIS
Overall length 1852 mm
Overall width 681 mm
Overall height 1168 mm
Seat length 860 mm
Ground clearance (unladen) 160 mm
Wheel base 1275 mm
108 kg (front alloy wheel disc & rear alloy wheel drum type)
Kerb weight (with toolkit and 90% of fuel)
107 kg (front & rear alloy wheel drum type)
Pay load 130 kg
238 kg (front alloy wheel disc & rear alloy wheel drum type)
Maximum laden weight
237 kg (front & rear alloy wheel drum type)
Steering angle 90°
Caster angle 25°
Frame High rigidity underbone type
Front suspension Telescopic hydraulic
Rear suspension Toggle link, gas filled hydraulic damper
Trail length 93 mm

80
 Front (Disc) 220 mm dia (hand operated)
Front (Drum) 130 mm dia (hand operated)
Rear (Drum) 130 mm dia (hand operated)
TYRE
Front tyre 90/90 - 12 54J (tubeless)
Rear tyre 90/90 - 12 54J (tubeless)
Front tyre pressure** 1.68 kg/cm² (24 PSI)
Rear tyre pressure - Solo** 2.25 kg/cm² (32 PSI)
Rear tyre pressure - Dual** 2.53 kg/cm² (36 PSI)
ELECTRICAL
Ignition system ECU controlled ignition
Spark plug BOSCH UR5KCU / CHAMPION RG8MC5
Spark plug gap 1.0 ~ 1.1 mm
Battery type 12V, 4Ah MF battery
Generator (flywheel magneto) 12V, 130W
Head lamp 9V, 9.5W High beam LED / 6V, 5W Low beam LED
Tail / brake lamp 12V, 10/5W
#
Applicable only for Disc Brake version ** In cold condition

81
81
Turn signal lamps bulb 12V, 10W x 4
Number plate lamp bulb 12V, 3W x 1
Turn signal indicator lamp bulb 12V, LED
Instrument cluster LCD / LED indicators
High beam indicator lamp 12V, LED
Low fuel warning lamp 12V, LED
Economy and power mode indicator lamp 12V, LED
Malfunction indicator lamp 12V, LED
ISG malfunction indicator lamp 12V, LED
Horn 12V, DC
Fuse Blade type - 12V, 15A x 1 / Mini fuse 12V, 15A x 1 & 12V, 10A x 1

Caution
Using the bulb other than the specified rating can result in overloading of the electrical system or premature failure of the
bulb.

82
 Fuel tank capacity 5.1 l
BS VI petrol with minimum RON 91 (containing upto 20% of ethanol by
Fuel
volume)
Engine / transmission oil grade TVS TRU4 SKUUTA oil (SAE 10W30 API-SL, JASO MB)
Engine oil capacity 700 ml
Transmission oil capacity 120 ml
Front fork oil grade Gabriel Premium front fork oil
Front fork oil capacity 92 ± 1 ml per leg
Disc brake fluid# TVS Girling DOT 3 / DOT 4

Note
Specifications are subject to change without notice.

The fuel tank is not a measuring instrument and the capacity of the fuel tank may vary from the indicated capacity
#
Applicable only for Disc Brake version

83
83
insurance is an offense under Motor Vehicles Act.
To assist our Customers on their insurance requirements such as the prompt issue and renewal of policies as well as
expeditious settlement of claims if any, our preferred insurers are:

84