TDS Byk-012 en

BYK-012
Data Sheet
Issue 08/2021
BYK-012
Polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks and
adhesives. Especially recommended for high-quality architectural coatings. Optimal effect
at the lowest dosage.
Product Data
Composition VOC-free (< 1500 ppm)

Compound of polyether with hydrophobic particles Does not contain
alkylphenol ethoxylates
Typical Properties
The values indicated in this data sheet describe typical properties and
do not constitute specification limits.
Density (20 °C): 1.01 g/ml
Storage and Transportation

Separation possible. Mix well before use. The additive is not frost sensitive, although storage at 10-25 °C
is recommended for optimum handling.
Applications
Coatings Industry
Special Features and Benefits

BYK-012 is especially recommended as a defoamer in the preparation and application of emulsion paints and
plasters within a PVC range of 30-85. The additive is free of silicones and mineral oil, and is especially suitable for
VOC-free systems. It exhibits an optimal effect at the lowest dosage, is stable to acids and alkalis, and can be used
in the pH range 3-12. BYK-012 can lead to turbidity and seeding in clear coatings.
Recommended Use
Architectural Coatings X
Wood and Furniture Coatings Y
Leather Finishes Y
Protective Coating Systems Y
X especially recommended Y recommended
Recommended Levels
0.05-0.5 % additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined
through a series of laboratory tests.
BYK-012
Data Sheet
Issue 08/2021
Incorporation and Processing Instructions

The additive can be added at any time during production. Sufficiently high shear forces must be applied.
Printing Inks and Overprint Varnishes

BYK-012 is especially recommended as a defoamer for aqueous printing inks. The additive is free
of silicones and mineral oil, and exhibits an optimal effect at the lowest dosage. BYK-012 can lead
to turbidity and seeding in overprint varnishes.
Recommended Levels

Adhesives & Sealants

BYK-012 is a highly effective defoamer for all current dispersion adhesives, and inhibits foaming during
both production and application. It is a particularly good defoamer for polyacrylate-based dispersion
adhesives. The product is free of silicones and mineral oil, and is especially recommended for VOC-free
systems. It exhibits an optimal effect at the lowest dosage, is stable to acids and alkalis, and can be used
in the pH range 3-12.
Recommended Levels

BYK-Chemie GmbH ADD-MAX®, ADD-VANCE®, ADJUST®, ADVITROL®, ANTI-TERRA®, AQUACER®, AQUAMAT®, AQUATIX®, BENTOLITE®, BYK®, BYK®-DYNWET®,
P.O. Box 10 02 45 BYK®-MAX®, BYK®-SILCLEAN®, BYKANOL®, BYKETOL®, BYKJET®, BYKO2BLOCK®, BYKOPLAST®, BYKUMEN®, CARBOBYK®, CERACOL®, CERAFAK®,
46462 Wesel CERAFLOUR®, CERAMAT®, CERATIX®, CLAYTONE®, CLOISITE®, DISPERBYK®, DISPERPLAST®, FULACOLOR®, FULCAT®, GARAMITE®, GELWHITE®,
Germany HORDAMER®, LACTIMON®, LAPONITE®, MINERAL COLLOID®, MINERPOL®, NANOBYK®, OPTIBENT®, OPTIFLO®, OPTIGEL®, POLYAD®, PRIEX®,
Tel +49 281 670-0 PURE THIX®, RECYCLOBLEND®, RECYCLOBYK®, RECYCLOSSORB®, RECYCLOSTAB®, RHEOBYK®, RHEOCIN®, RHEOTIX®, SCONA®, SILBYK®,
Fax +49 281 65735 TIXOGEL®, VISCOBYK® and Y 25® are registered trademarks of the BYK group.
[email protected] The information herein is based on our present knowledge and experience. The information merely describes the properties of our products but
www.byk.com no guarantee of properties in the legal sense shall be implied. We recommend testing our products as to their suitability for your envisaged purpose
prior to use. No warranties of any kind, either express or implied, including warranties of merchantability or fitness for a particular purpose, are made
regarding any products mentioned herein and data or information set forth, or that such products, data or information may be used without infringing
intellectual property rights of third parties. We reserve the right to make any changes according to technological progress or further developments.
This issue replaces all previous versions.

TDS Byk-012 en

Uploaded by

Copyright:

Available Formats

TDS Byk-012 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TDS Byk-012 en

Uploaded by

Copyright:

Available Formats

BYK-012

Composition VOC-free (< 1500 ppm)

Density (20 °C): 1.01 g/ml

Storage and Transportation

Special Features and Benefits

Incorporation and Processing Instructions

Printing Inks and Overprint Varnishes

Special Features and Benefits

Incorporation and Processing Instructions

Adhesives & Sealants

Special Features and Benefits

Incorporation and Processing Instructions

This issue replaces all previous versions.

You might also like