APOS Introduction Course (Mars - 09)
APOS Introduction Course (Mars - 09)
•DP-referance
•Monitor targets
•Sensor reading
• DGPS
• Differential global positioning
system
• RADIUS
• Short range microwave position
fixing system
• FANBEAM
• Laser beam /reflector
• TAUTWIRE
• Mechanical reference system
• HiPAP®/HPR
• Hydroacoustic position
reference system using sound
waves to communicate.
• HAIN (new for DP-use)
• Hydroacoustic aided inertia
navigation.
• Separate computer interfaced
to a IMU-sensor (inertia
measuring unit) using HIPAP as
aid.
Template
Transponders
Hose-end TP Depth
sensor TP Angle sensor TP
Heading
sensor TP
DP-ref TPs
Transponders to
monitor bouy
elements
Vessel positioning
Touch down monitoring
Plough monitoring
”Spider”-
positioning
DP-ref Transponders
Motion sensor
Heading sensor
Data output
Ethernet
switch/
Converter
Hull
Unit
Responder
(optional)
Responder
Drive Unit
Transceiver
unit Model x81 Hoist Control
Unit
Operator Operator
Station Station
Network comm.
Ethernet Ethernet
switch/
Converter
Hull switch/
Converter
Hull
Unit Unit
Responder Responder
(optional)
(optional)
Responder Responder
Drive Unit Drive Unit
Transceiver Transceiver
unit Model x81 Hoist Control unit Model x81 Hoist Control
Unit Unit
HiPAP 350 HiPAP 450 (Cd31053a) HiPAP 350 HiPAP 450 (Cd31053a)
TRANSMITT RECEIVE
• Transponders (Seabed)
• Transponders (BOP)
• Transponders (Special)
• Responders (Rov)
Transponder type
Battery type
Serial number
Channel code
• Model numbers:
• 1. digit:
– 1= 15 kHz - low frequency
– 3= 30 kHz - medium frequency Options:
• 2. digit:
– 1= 1000 meter depth rating • D Depth sensor
– 2= 2000 meter depth rating • H Heading magnetic compass
– 3= 3000 meter depth rating • E External power
• I Inclinometer
– 6= 6000 meter depth rating
• II Internal and external inclinometers
• 3. digit: • N Rechargeable battery pack
– 1= ± 15° beam width • R Release mechanism
– 3= ± 30° beam width • S Split, separate transducer & housing
– 4= ± 45° beam width • T Temperature sensor
– 6= ± 60° beam width • L Long tube
– 9= ± 90° beam width • Sx Short tube
• Rsp Responder
• DuB Dual Beam
• Ail Analogue interface logger
• St Stainless Steel Housing
Transponder with
internal Inclinometer
External
Inclinometer
Connector for
ROV
power/trigger
Internal pressure
release valves
ON / OFF
plug
• Typical Deck-test of
Transponders :
• Change channels
Depth sensor
value
Inclinometer
value
Heading value
Battery Type L10/36 (18/30) A10/36 (24/24) N10/36 (18/30) L10/36 (18/36)
Reply pulses, Low source level 19,6 million 5,4 million 1,4 million 6,4 million
Reply pulses, High source level 9,8 million 2,2 million O,7 million 3,2 million
Reply pulses, Max sourse level 4,9 million 1,1 million 0,36 million 1,6 million
Factors:
Activity (disabled, navigation, telemetry, update rate, sensor data…)
Source level (Max, High, Low, Min)
Lifetime specification:
Ping Count Readings:
Number of reply pulses in High source level
Quiescent lifetime:
The total time the transponder can listen for interrogation pulses
After this time transponder will not be able to reply
100
Conclusion
What
happend ?
Lubricate if
needed
In one piece ?
Shaft-sleeve
needs lubication !
APOS
• Reading MRU, Gyro, GPS,
Depth sensors etc.
• Output to DP, Survey, Blom-
log, ROV equipment, VDR etc…
HIPAP
• View HiPap performance
• Position calculation
• Check status in Transceiver
• Fault-finding tool
Operator
Station
Motion sensor
Typical outputs:
Heading sensor
Typical Inputs:
Data output
MRU Ethernet
switch/ Hull
DP
Converter
Unit
Responder
GYRO Survey
(optional)
Responder
Drive Unit
Transceiver
unit Model x81 Hoist Control
GPS
Unit
ROV
ROV-depth BLOM
ROV-Gyro Diving