aerospace

climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding

Pneumatic Rotary Actuator

Series RA

Catalogue PDE2556TCUK April 2011

PDE2556TCUK
Rotary Actuators - Series RA

Relief surface for Stub shaft for end posi- Robust shaft bear-
smooth operation tion indication or hand ings of lubricant
and long service life. operation. charged plastic,
for dry operation.

Large bearing surfaces

of POM give low friction.

Corrosion-resistant
Smooth external materials.
design ‑ easy to
keep clean. The device is perma-
nently lubicated and
Threaded mounting Standardized requires no additional
holes for direct and connection lubrication.
compact mounting. Shaft with key‑ways. arrangement.

Pneumatic rotary actuator RA

The RA is a double‑acting rotary actuator of very compact design. It Technical data
has a high torque and small installation dimensions. The actuator has Working medium dry, filtered compressed air
double pistons, which transmit the turning moment to the output shaft. Working pressure max. 10 bar
The toothed piston rods act on the output shaft in a rack‑and‑pinion Working temperature ‑20 °C to +80 °C
type arrangement. Each piston and toothed rod is of integral construc-
Prelubricated, further lubrication is not normally necessary.
tion. The rack‑and‑pinion type arrangement gives an even turning
If additional lubrication is introduced it has to be continued.
moment throughout the rotation movement.
The drive shaft is robustly supported in bushings of self‑lubricating
plastic. There are key‑ways on the output end of the shaft, while the Ordering information for RA
opposite end of the shaft has a stub that can be used to accommodate
end‑position indication, or to facilitate hand operation of the actuator. Angle Order code
The turning limits of the rotary actuator should be determined by   90° RA2-90
external stop lugs, in order to protect the unit from the effects of exces- 180° RA2-180
sive load inertia.   90° RA4-90
Compressed air is fed into the piston chambers via a connection 180° RA4-180
plate and drilled galleries in the central part and end covers. The   90° RA8-90
connection plate is fitted to a standardized connection arrangement 180° RA8-180
on one of the long sides of the unit. This means that the end covers are   90° RA12-90
completely smooth, without any protruding parts. 180° RA12-180
The RA rotary actuator has a cylinder block of natural anodized   90° RA20-90
aluminium, with end covers of black anodized aluminium. The unit is 180° RA20-180
available in 5 different sizes, covering a turning‑moment range of 20
to 200 Nm. As standard, all sizes are available with a turning angle of
either 90° or 180°.
Material specification
Cylinder block/end covers Anodized aluminium, natural/black
Pistons Aluminium
Relief surface bars Stainless steel
Important Shaft Zinc‑plated steel
Before attempting any external or internal work
End cover screws Zinc‑plated steel
on the rotary actuator or any connected compo-
Seals Nitrile rubber, NRB
nents, make sure the rotary actuator is vented
Piston bearings POM
and dis­connect the air supply in order to ensure
Shaft bearings Polyethene MOS2
isolation of the air supply.

Note Note
Air quality is essential for maximum cylinder All technical data in this catalogue is typical data
service life (see ISO 8573). only.

Parker Hannifin Corporation

Pneumatic Division - Europe
2
PDE2556TCUK
Rotary Actuators - Series RA

Dimensions
Y
V, depth X
RA2 - 8 RA12 - 20
M5, depth 8 G1/8, depth 10 M5, depth 8 G1/8, depth 12
Connection arrangements:

16 1,5
EURO standard

3
32

32
according to ISO and

16
U
Namur- VDI/VDE 3845
12 12
24 24

Q
M P

R
B
E
G

F
H

S
L

N
T

ØJ O The turning limits

A (90°) D should be determined
K (180°) C by external stop lugs.

Designation A B C D E F G H ØJh8 K L M N O P

RA2 114,5 73,0 75,5 43,5 41 - 20,5 4 14 169 30 M6 19 5 7,5

RA4 133,0 90,5 87,5 47,5 41 - 20,5 4 19 215 40 M6 31 6 7,5
RA8 172,0 109,0 105,0 57,0 42 7,5 28,5 4 19 245 40 M8 31 6 11,5
RA12 194,0 118,5 121,0 67,0 43 8,0 29,5 5 28 295 60 M8 48 8 11,5
RA20 218,0 140,5 136,5 72,0 43 8,0 29,5 5 28 337 60 M8 48 8 11,5

Designation Q R S T U V X Y

RA2 13 10,0 16,0 11,0 32 M5 8 50

RA4 15 11,0 21,5 15,5 32 M5 8 73
RA8 17 13,5 21,5 15,5 40 M6 10 90
RA12 20 15,0 31,0 24,0 49 M6 10 107
RA20 25 15,0 31,0 24,0 60 M6 10 120

Table of moments at 6 bar Spare parts

Designation Moment in Nm Designation Order code
RA2 22,8 Mounting plate for VGD15 9127 3864-01
RA4 45,0 seal kits/spare kits:
RA8 81,7 RA-2-SS 9121 6799-20
RA12 134,0 RA-4-SS 9121 6799-21
RA20 224,0 RA-8-SS 9121 6799-22
RA-12-SS 9121 6799-23
RA-20-SS 9121 6799-24
Air consumption
Free air consumption in Nl per double stroke at 600 kPa (6 bar). Variants available on request:
Single-acting rotary actuator with spring return for 90°
Rotary actuator,type/ RA2 RA4 RA8 RA12 RA20 Non-standard turning angle
Turning angle Other surface treatments
RA/90° 1,8 3,2   5,9   7,8 14,9
RA/180° 3,6 6,4 11,8 15,6 30

Parker Hannifin Corporation

Pneumatic Division - Europe
3
Parker Worldwide

Europe, Middle East, Africa IE – Ireland, Dublin North America

Tel: +353 (0)1 466 6370
AE – United Arab Emirates, [email protected] CA – Canada, Milton, Ontario
Dubai Tel: +1 905 693 3000
Tel: +971 4 8127100 IT – Italy, Corsico (MI)
Tel: +39 02 45 19 21 US – USA, Cleveland
[email protected]
[email protected] Tel: +1 216 896 3000
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 KZ – Kazakhstan, Almaty
[email protected] Tel: +7 7272 505 800 Asia Pacific
[email protected]
AT – Eastern Europe, Wiener AU – Australia, Castle Hill
Neustadt NL – The Netherlands, Oldenzaal Tel: +61 (0)2-9634 7777
Tel: +43 (0)2622 23501 900 Tel: +31 (0)541 585 000
CN – China, Shanghai
[email protected] [email protected]
Tel: +86 21 2899 5000
AZ – Azerbaijan, Baku NO – Norway, Asker
HK – Hong Kong
Tel: +994 50 2233 458 Tel: +47 66 75 34 00
Tel: +852 2428 8008
[email protected] [email protected]
IN – India, Mumbai
BE/LU – Belgium, Nivelles PL – Poland, Warsaw
Tel: +91 22 6513 7081-85
Tel: +32 (0)67 280 900 Tel: +48 (0)22 573 24 00
[email protected] [email protected] JP – Japan, Tokyo
Tel: +81 (0)3 6408 3901
BY – Belarus, Minsk PT – Portugal, Leca da Palmeira
Tel: +375 17 209 9399 Tel: +351 22 999 7360 KR – South Korea, Seoul
[email protected] [email protected] Tel: +82 2 559 0400
CH – Switzerland, Etoy RO – Romania, Bucharest MY – Malaysia, Shah Alam
Tel: +41 (0)21 821 87 00 Tel: +40 21 252 1382 Tel: +60 3 7849 0800
[email protected] [email protected] NZ – New Zealand, Mt Wellington
CZ – Czech Republic, Klecany RU – Russia, Moscow Tel: +64 9 574 1744
Tel: +420 284 083 111 Tel: +7 495 645-2156 SG – Singapore
[email protected] [email protected] Tel: +65 6887 6300
DE – Germany, Kaarst SE – Sweden, Spånga TH – Thailand, Bangkok
Tel: +49 (0)2131 4016 0 Tel: +46 (0)8 59 79 50 00 Tel: +662 186 7000 99
[email protected] [email protected]
TW – Taiwan, Taipei
DK – Denmark, Ballerup SK – Slovakia, Banská Bystrica Tel: +886 2 2298 8987
Tel: +45 43 56 04 00 Tel: +421 484 162 252
[email protected] [email protected]
ES – Spain, Madrid SL – Slovenia, Novo Mesto South America
Tel: +34 902 330 001 Tel: +386 7 337 6650 AR – Argentina, Buenos Aires
[email protected] [email protected] Tel: +54 3327 44 4129
FI – Finland, Vantaa TR – Turkey, Istanbul BR – Brazil, Sao Jose dos Campos
Tel: +358 (0)20 753 2500 Tel: +90 216 4997081 Tel: +55 800 727 5374
[email protected] [email protected]
CL – Chile, Santiago
FR – France, Contamine s/Arve UA – Ukraine, Kiev Tel: +56 2 623 1216
Tel: +33 (0)4 50 25 80 25 Tel +380 44 494 2731
[email protected] [email protected] MX – Mexico, Apodaca
Tel: +52 81 8156 6000
GR – Greece, Athens UK – United Kingdom, Warwick
Tel: +30 210 933 6450 Tel: +44 (0)1926 317 878
[email protected] [email protected]
HU – Hungary, Budapest ZA – South Africa, Kempton Park
Tel: +36 1 220 4155 Tel: +27 (0)11 961 0700 European Product Information Centre
[email protected] [email protected] Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,
SE, SK, UK, ZA)

© 2011 Parker Hannifin Corporation. All rights reserved. Catalogue PDE2556TCUK April 2011

Parker Hannifin Ltd.

Tachbrook Park Drive
Tachbrook Park,
Warwick, CV34 6TU
United Kingdom
Tel.: +44 (0) 1926 317 878
Fax: +44 (0) 1926 317 855
[email protected] Your local authorized Parker distributor
www.parker.com