Styrolux 3G46

Styrene Butadiene Copolymer (SBC)

DESCRIPTION
The product line Styrolux® comprises clear styrene butadiene copolymers. The grades have in general an intrinsic toughness, are easy to
process and work as modifiers and compatibilizers not only in polystyrene but in many other polymers, e.g. polyolefins. For all Styrolux®
grades food contact statements are available upon request. Styrolux® 3G46 is specifically designed for sheet- and film extrusion and
thermoformed articles. It shows a high performance in blends with general-purpose polystyrene, providing parts with an excellent balance of
transparency and toughness. 3G46 is also offered for medical applications and is Gamma, X-ray & ETO sterilizable.

FEATURES APPLICATIONS
Easy processing Food contact applications
Well extrudable Medical devices
Very good miscibility with GPPS Rigid packaging
Sterilisable(ETO,NO2,Irradiation) Cosmetic packaging
Transparency Toys, sports & leisure

Property, Test Condition Standard Unit Values

Rheological Properties

Melt Volume Rate, 200 °C/5 kg ISO 1133 cm³/10 min 12

Mechanical Properties

Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 1.5

Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² > 80

Tensile Modulus ISO 527 MPa 1500

Tensile Stress at Yield, 23 °C ISO 527 MPa 27

Tensile Strain at Yield, 23 °C ISO 527 % 2

Tensile Stress at Break, 23 °C ISO 527 MPa 18

Tensile Strain at Break, 23 °C ISO 527 % 90

Nominal Strain at Break, 23 °C ISO 527 % 180

Flexural Modulus, 23 °C ISO 178 MPa 1400

Flexural Strength, 23 °C ISO 178 MPa 30

Hardness, Shore D ISO 868 - 55

Thermal Properties

Contact us:
[email protected]
www.ineos-styrolution.com Page 1 of 3
Revision Date: 12/01/16
 Styrolux 3G46
Styrene Butadiene Copolymer (SBC)

Property, Test Condition Standard Unit Values

Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 62

Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 76

Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 60 - 90

Optical Properties

Refractive Index, Sodium D Line ISO 489 - 1.573

Haze ASTM D 1003 % 1

Light Transmission at 550 nm ASTM D 1003 % 91

Other Properties

Density ISO 1183 kg/m³ 1020

Water Absorption, Saturated at 23 °C ISO 62 % 0.07

Processing

Linear Mold Shrinkage ISO 294-4 % 0.3 - 1

Melt Temperature Range ISO 294 °C 180 - 250

Mold Temperature Range ISO 294 °C 30 - 50

Typical values for uncolored products

Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details.

SUPPLY FORM
Styrolux is supplied in pellet form and should be kept in its original containers in cool, dry place. Avoid direct exposure to sunlight. Styrolux®
can be stored in silos at temperatures well below 45 °C.

PRODUCT SAFETY
During processing of Styrolux® small quantities of styrene monomer may be released into the atmosphere. At styrene vapor concentrations
below 20 ppm no negative effects on health are expected. In our experience, the concentration of styrene does not exceed 1 ppm in well
ventilated workplaces - that is where five to eight air changes per hour are made. For safety information please refer to our Material Safety
Data Sheet for this product.

DISCLAIMER

Contact us:
[email protected]
www.ineos-styrolution.com Page 2 of 3
Revision Date: 12/01/16
 Styrolux 3G46
Styrene Butadiene Copolymer (SBC)

The above mentioned data are accurate to the best of our knowledge. They are based upon reputable labs and industry standard testing
methods. These are only typical values and actual product specification may deviate at industrial range. Therefore, no data in this technical
data sheet shall constitute a warranty or representation regarding product features, fitness of the product for a specific purpose or application
or its processability. INEOS Styrolution disclaims all liability in connection therewith. The customer himself is required to verify whether or not
the product is suitable for the further processing or application intended and whether or not the product complies with the relevant statutory
requirements. Unless explicitly and individually otherwise agreed in writing, INEOS Styrolution's sole and exclusive liability with respect to its
products is set forth in INEOS Styrolution's General Terms and Conditions for Sale.

Contact us:
[email protected]
www.ineos-styrolution.com Page 3 of 3
Revision Date: 12/01/16