ACORGA NR series copper solvent extractants are Copper extraction designed to help mining companies by protecting against isotherm point at 25°C degradation of their solvent extractant; particularly, Organic Not less than 4.2 g/l degradation that is caused by exposure to nitrating Aqueous Not greater than 1.6 g/l conditions. The NR series can reduce extractant Copper Strip replacement costs and improve the operational reliability isotherm point at 25°C of a processing facility. These nitration resistant reagents Organic Not greater than 2.1 g/l also have the same tailored metallurgical advantages as Aqueous Not less than 32.0 g/l compared to unmodified reagents which include a reagent Copper/Iron selectivity Not less than 2000 strength that is matched to the PLS conditions, improved Phase disengagement selectivity and enhanced copper transfer. Extract Not more than 60 sec Strip Not more than 60 sec Physical Data Complex solubility at 0°C At 24 hours No precipitation Oder & appearance Oder free, clear amber- colored liquid, free from visible impurities Note: Before handling this material, read the appropriate Cytec material Safety Data Sheet for more detailed information on physical properties and safety, health and Specific gravity, 25°C 0.98-1.0 environmental data Viscosity, cP at 25°C Not more than 600 Flash point, °C Typically > 62 (PMCC) Shipping Performance Data ACORGA NR series copper solvent extractants are shipped in drums, totes or bulk containers. For information on Copper uptake 0.57-0.61 g/l per v/o bulk delivery, contact your Cytec Sales Representative or Extract kinetics, approach local sales office. to equilibrium at 25°C 15 sec Not less than 85% 30 sec Not less than 95% Strip kinetics, approach to Equilibrium at 25°C 15 sec Not less than 95%
www.cytec.com Technical Service
Contact your nearest Cytec sales office for assistance in
choosing the optimum metal extraction reagent for your particular circuit conditions. Once the optimum reagent has been selected, Cytec sales personnel are available to assist your operation in achieving the highest reagent performance. In addition to the wide range of metal extraction reagents, Cytec Industries Inc. offers a complete line of products for use in metallurgical applications: thickener and washer flocculants, defoamers, iron removal agents, filtering aids, collectors, depressants, deposit control agents, bauxite handling aids, hydrate flocculants, and humate removal agents.
