fx-500 e Cata

Digital Fiber Sensor
85
FX-500 SERIES Ver.2
FIBER
■■General terms and conditions.............. F-3 ■■Selection guide………………………… P.3~
SENSORS ■■Fiber selection.................................... P.5~ ■■SC-GU3......................................... P.971~
Related Information
LASER
SENSORS
■■Glossary of terms........................ P.1549~ ■■General precautions.................... P.1552~
PHOTOELECTRIC
■■Korea’s S-mark.............................. P.1602
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
Ver.2 Listing
SENSORS
SAFETY LIGHT
CURTAINS /
SAFETY COMPONENTS Certified
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS PNP output Timer Interference Light intensity
type available prevention monitor
MEASUREMENT
SENSORS *T here is no change in Model No. and price due
STATIC
to version upgrade.
* Cover opened state is shown.
panasonic.net/id/pidsx/global Automatic Test input External sync.
CONTROL
DEVICES sensitivity setting
LASER
MARKERS
PLC
At the industry’s leading edge
HUMAN MACHINE
INTERFACES Improved the operability and visibility of the operation keys
ENERGY
MANAGEMENT Operation keys (setting switch and MODE key) have been renewed to be easy to operate. Also, the color of the keys
SOLUTIONS
has been changed from black to light gray to achieve good visibility in dim light.
FA COMPONENTS
Previous Setting switch MODE key Upgraded Setting switch MODE key
MACHINE VISION (Ver. 2) Clicking
SYSTEMS
UV CURING
touch!
SYSTEMS
Selection
High stability!
Guide
Fibers When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units
Fiber is decreased to only 1/4 of that of conventional models.
Amplifiers By being close to absolute values instead of modified digital values, changes in detection that could not be found in
Other Products the past can now be monitored.
FX-500 Super quality fiber FX-500 series

Incident light intensity
FX-550 Incident light
Threshold Incident light
value intensity intensities are
FX-100 stable.
FX-410
Unify the threshold value 1/4
incident light
Can control by
using just one
threshold value.
intensity variation
[from previous]
Threshold Incident light

value intensity Incident light intensity
Conventional amplifier
L D
MODE
Large variation in
Variation in the threshold value incident
L D
MODE
light intensity.
L D
Requires setting
MODE
different
threshold values
L D for each sensor.
MODE
FX-500 SERIES Ver.2
86
A quality that surpassed that of standard fibers! FIBER

SENSORS
New fibers developed using a new manufacturing method adopted by our own factory along with a persistent quality LASER
control system. SENSORS
The basic performance of a standard fiber is greatly enhanced! PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
Stable emission amount ± 10 ø2.2 mm ø0.087 in standard fiber
SAFETY LIGHT
CURTAINS /
Variation in emission amount of the fiber core
New material
SAFETY COMPONENTS
Previous
is controlled down to less than ±10 %, PRESSURE /
achieving a stable detection. FLOW
• Beam axis deviation: Thru-beam type within ±2 °, SENSORS
Reflective type within ±3 ° Single core standard fiber In general, high-flexibility INDUCTIVE
with high flexibility types adopt a multi-fiber core, PROXIMITY
• Beam axis centering precison: within ± 150 μm which may result in large SENSORS
variation in light emission.
PARTICULAR
USE SENSORS
Expanded temperature range More flexible! R4
SENSOR
OPTIONS
Ambient temperature [–40 to +70 °C –40 to +158 °F in previous model] Bending radius [Previous model is R25 mm R0.984 in]
SIMPLE
– 55 to +80 °C 1.2 times R4 mm 1/6

WIRE-SAVING
UNITS
– 67 to +176 °F R0.157in
more than of that of
previous model previous model WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
Integrated high-precision plug More bendable! STATIC
CONTROL
The centering precision of Bending durability [Previous model is 1,000 times] DEVICES
the fiber core attached to the
10 million
inserting plug is doubled. LASER
As the insertion precision is 10,000 times MARKERS
increased, the variation among
units can be greatly suppressed.
times more than previous model
PLC
* Bending conditons
• Centering precision: within ± 40 μm Bending radius: R10 mm R 0.394 in,
Reciprocating bending 180° HUMAN MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
H y p e r
FA COMPONENTS
Max. 25 μs response time HYPR mode incorporated MACHINE VISION

SYSTEMS
FX-500 with its high response time contributes to FX-500 in combination with small diameter fibers which
improve productivity. can handle challenging detections, allows long sensing UV CURING
SYSTEMS
range.
FX-500
7RXJK
FD-41
Max.
5.7 times! (Note)
longer than the previous model
HYPR mode Selection

Guide
Previous FD-NFM2 Fibers
FX-301 (LONG mode)
Fiber
Amplifiers
Performing minute object detection when using a small Note: When using FD-NFM2. Other Products
diameter fiber is now possible with a high response time
and longer sensing range.
FX-500
So accurate! Sharp detection with suppressed hysteresis FX-550
FX-100
FX-500 with its • Long range detection of small objects with small • Highly accurate detection while
accurate detection difference in light intensity H-02 mode avoiding saturation H-01 mode FX-410
catches fractional
differences in
light intensity, achieving
high precision and
solving low-hysteresis
applications.
FR-Z50HW
Retroreflective
type fiber
FT-A11
Reflector
FX-500 SERIES Ver.2
87 Digital Fiber Sensor
FIBER Flat display with wide viewing angle

SENSORS
LASER The large and high-contrast 7-segment display of high Pr

ev
SENSORS luminance provides clear visibility from a wide angle of i ou
s
PHOTOELECTRIC
view. sp
ac
SENSORS
e
re
qu
MICRO
i re
PHOTOELECTRIC
me
SENSORS Compact cover does not get in the way
1/3
nt
AREA Reduced to of the previous model’s size
SENSORS
SAFETY LIGHT Clearly visible even
CURTAINS / from sideways
SAFETY COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE R23 mm
PROXIMITY
SENSORS
R0.906 in
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
Resolves variation in displayed incident light intensity
MEASUREMENT Display
SENSORS Display adjustment setting adjustment
STATIC setting
CONTROL The variation in display can be adjusted to random
DEVICES
values. This helps to define proper instruction in a work
LASER
MARKERS order.
PLC
Current incident light intensity Unify incident light intensity into any value
HUMAN MACHINE
INTERFACES
ENERGY
MANAGEMENT
Stable detection over long and short periods Saves maintenance time
SOLUTIONS Stabilized emission amount Threshold tracking function
FA COMPONENTS
The “four-chemical emitting element”, which we are the This function performs automatic setting to threshold
MACHINE VISION first to incorporate to maintain a stable level of light value by checking the incident light intensity at desired
SYSTEMS emission, has now become an industry standard. intervals in order to follow the changes in the light
UV CURING FX-500 series continues to adopt the same emitting amount resulting from changes in the environment over
SYSTEMS element as well as the “APC (Auto Power Control) long periods (such as dust). This contributes to reduction
circuit” which improves stability in short periods such as in maintenance hours.
when the power is turned on.
Selection Suitable for preventative maintenance FX-502(P) ‌

Detect deterioration in light intensity
(e.g. Useful in dusty environment)
Guide
Self-diagnosis output FX-505(P)-C2
Fibers
Fiber
Amplifiers FX-502(P) / 505(P)-C2 can set Output 2 as a self-
Other Products
diagnosis output. When the teaching of Output 1’s
threshold value is carried out, Output 2 is set
concurrently with the setting randomly shifted by the
FX-500 amount of surplus of threshold value. Light intensity
FX-550
deterioration due to fiber breakage or dust accumulation
Self-diagnosis can be used with the threshold
can be notified as an alarm output.
FX-100 tracking function for added effectiveness.
FX-410
Stable detection while being eco-friendly
Emission power & gain setting
In cases when the incident Detecting a transparent sheet
light intensity is saturated,
the light emitting amount Normal AUTO
can be adjusted to the
optimal level by AUTO Object present
without changing the
response time. This allows
stable detection with an
optimal S/N ratio and saves Object absent
energy by controlling the Saturated
emitting electric current.
Auto mode (AUTO) and 3-level manual mode (H / M / L [fine-adjustable]) are incorporated.
FX-500 SERIES Ver.2
88
Built-in logic functions FIBER

SENSORS
No PLC necessary, saving material and programming costs
LASER
Logical calculation functions SENSORS
PHOTOELECTRIC
3 logical calculations (AND, OR, Calculation of two neighboring amplifiers Truth table SENSORS
XOR) are available with fiber ⒷLower side Output 1: Normal output operation MICRO
sensor only. 3 logical operations Calculation result
Ⓒ Lower side Output 1 output Logical calculation output (C) PHOTOELECTRIC
can be selected against Output 1. SENSORS
A B
Ⓐ Upper side Output 1 Normal operation
Additional controller is not Communication direction (Up to 12 units)
AND OR XOR AREA
SENSORS
required so both wire-saving and ON ON ON ON OFF
SAFETY LIGHT
cost reduction can be achieved. Calculation of two outputs in one amplifier FX-502(P) / 505(P)-C2 CURTAINS /
OFF ON OFF ON ON SAFETY COMPONENTS
ⒶOutput 1: Normal output operation
ON OFF OFF ON ON PRESSURE /
Detection fiber FLOW
Ⓒ Output 1 Calculation result output SENSORS
OFF OFF OFF OFF OFF
INDUCTIVE
Ⓑ Output 2 Normal output operation PROXIMITY
SENSORS
PARTICULAR
Calculation of one amplifier and external input FX-502(P) / 505(P)-C2
USE SENSORS
ⒷOutput 1: Normal output operation
SENSOR
Synchronization fiber External input
OPTIONS
Ⓐ (sensor, contact, PLC, etc.)
SIMPLE
Ⓒ Output 1 Calculation result output WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
Equipped with 5 timer types Analog output cable type FX-505(P)-C2
MEASUREMENT
A wide variety of timer control operations SENSORS
To monitor the sensing of objects, a 4 to 20 mA analog
can be carried out by fiber sensors only. STATIC
current is output in respond to the digital value of the CONTROL
incident light intensity. DEVICES
Time chart Set to L-ON
Beam- LASER
received
Sensing Beam- Edge tracking of film or sheet MARKERS
condition interrupted 20
T1 ON
ON-delay OFF Actual position PLC
Output current (mA)
ON Meandering position
T1 T1
OFF-delay OFF HUMAN MACHINE
INTERFACES
T1 T1
ON
One-shot OFF ENERGY
MANAGEMENT
T1
ON SOLUTIONS
ON/OFF T2 4
OFF
-delay
ON-delay/ T1 T2
ON 0 Incident light intensity (digit) 4,000/8,000 FA COMPONENTS
One-shot OFF
MACHINE VISION
Timer period: 0.05 ms to 32 s SYSTEMS
Output 1 has ON / OFF-delay and ON-delay / One-shot timers are available.
The meandering path can be monitored UV CURING
as the light intensity changes. SYSTEMS
Smooth setup changes by 8 data banks Remote control improves work FX-502(P)
efficiency by external input FX-505(P)-C2
The number of data banks used for saving the setup Selection
Guide
conditions of the amplifirer is increased to eight. Setup Work efficiency can be improved by operating via PLC Fibers
conditions can be saved and loaded to make setup output or other external signal.* Fiber
changes easy at a worksite where multiple models are * FX-502(P) can operate via external signal when switching from Output Amplifiers
manufactured. 2 to external input. Other Products
Functions operable by external input

FX-500
Full-auto * / Limit * /
Display adjustment setting *
2-point teaching * FX-550
Data bank load * / save * Logical calculation (self-unit only) FX-100
Emission halt Copying function lock (self-unit only)
FX-410
* FX-505(P)-C2 can obtain answer back output after external input, when
sensing output 2 is set to answer back output mode.
FX-500 SERIES Ver.2
FIBER An optical communication function allows No need to specify a main unit or sub unit
SENSORS
sensors to be adjusted simultaneously
LASER
All FX-500 amplifiers can be used as either a main unit or a
SENSORS
The data that is currently set can be copied and saved all at sub unit. Just use a main cable or a sub cable to distinguish
PHOTO- once for all amplifiers connected together from the right side the two. This reduces the costs of inventory management.
ELECTRIC
SENSORS thanks to the optical communication function.
MICRO
PHOTO-
This greatly reduces troublesome setup tasks and makes
ELECTRIC
SENSORS
setup much smoother.
AREA
SENSORS
The same part number
SAFETY LIGHT
CURTAINS / can be used as either
SAFETY
COMPONENTS Single copy & save operation a main unit or sub unit!
PRESSURE / for all amplifiers
FLOW
SENSORS
INDUCTIVE
PROXIMITY Sub cable
SENSORS Optical communication
window
PARTICULAR
USE
SENSORS
Main cable (3-core)
CN-73-C□
SENSOR FX-501□
Sub cable (1-core)
OPTIONS CN-71-C□
Main cable (4-core)
SIMPLE CN-74-C□
WIRE-SAVING FX-502□
Sub cable (2-core)
Main cable Disconnection is possible without
UNITS
CN-72-C□ moving the amplifier sideways
WIRE-SAVING
SYSTEMS
MEASURE-
ORDER GUIDE
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
Amplifiers Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately.
MARKERS
Emitting
Type Appearance Model No. Output External input
PLC element
HUMAN
MACHINE FX-501 NPN open-collector transistor
Standard
INTERFACES
−
type
ENERGY
MANAGEMENT
SOLUTIONS FX-501P PNP open-collector transistor
FA
2-output type
COMPONENTS FX-502 NPN open-collector transistor 2 outputs

Incorporated
MACHINE Red LED
VISION (Switchable with Output 2)
SYSTEMS FX-502P PNP open-collector transistor 2 outputs
UV
CURING
NPN open-collector transistor 2 outputs
Cable type
SYSTEMS FX-505-C2 analog output

Incorporated
PNP open-collector transistor 2 outputs
FX-505P-C2 analog output
Selection
Guide
Fibers
Fiber
Amplifiers
Other
Products
FX-500
FX-550
FX-100
FX-410
FX-500 SERIES Ver.2
90
ORDER GUIDE FIBER

SENSORS
LASER
Quick-connection cables SENSORS
For FX-501(P) Quick-connection cable is not supplied with the amplifier. Please order it separately. PHOTO-
ELECTRIC
SENSORS
Main cable MICRO
PHOTO-
Type Model No. Description
• CN-73-C□ ELECTRIC
SENSORS
AREA
CN-73-C1 Length: 1 m 3.281 ft SENSORS
0.2 mm2 3-core cabtyre cable, with connector
Main cable
(3-core)
CN-73-C2 Length: 2 m 6.562 ft on one end SAFETY LIGHT
CURTAINS /
Cable outer diameter: ø3.3 mm ø0.130 in SAFETY
CN-73-C5 Length: 5 m 16.404 ft Sub cable COMPONENTS
PRESSURE /
CN-71-C1 Length: 1 m 3.281 ft 0.2 mm2 1-core cabtyre cable, with connector • CN-71-C□ FLOW
SENSORS
Sub cable on one end
(1-core)
CN-71-C2 Length: 2 m 6.562 ft
Cable outer diameter: ø3.3 mm ø0.130 in INDUCTIVE
PROXIMITY
CN-71-C5 Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. SENSORS
PARTICULAR
USE
SENSORS
For FX-502(P) Quick-connection cable is not supplied with the amplifier. Please order it separately.
SENSOR
Main cable OPTIONS
Type Model No. Description SIMPLE

• CN-74-C□ WIRE-SAVING
UNITS
WIRE-SAVING
0.2 mm2 4-core cabtyre cable, with connector
Main cable SYSTEMS
(4-core)
CN-74-C2 Length: 2 m 6.562 ft on one end
Cable outer diameter: ø3.3 mm ø0.130 in MEASURE-
CN-74-C5 Length: 5 m 16.404 ft Sub cable MENT
SENSORS
CN-72-C1 Length: 1 m 3.281 ft 0.2 mm2 2-core cabtyre cable, with connector • CN-72-C□ STATIC
CONTROL
Sub cable on one end DEVICES
(2-core)
Cable outer diameter: ø3.3 mm ø0.130 in
CN-72-C5 Length: 5 m 16.404 ft Connectable to a main cable up to 15 cables. LASER
MARKERS
PLC
End plates End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.
HUMAN
MACHINE
INTERFACES
Appearance Model No. Description
ENERGY
MANAGEMENT
SOLUTIONS
When amplifiers are mounted in cascade, or when
an amplifier moves depending on the way it is FA
COMPONENTS
installed on a DIN rail, these end plates clamp
MS-DIN-E amplifiers into place on both sides. Make sure to MACHINE
use end plates when cascading multiple amplifiers VISION
SYSTEMS
together.
UV
2 pcs. per set CURING
SYSTEMS
OPTIONS
Selection
Guide
Amplifier mounting bracket
Fibers
Designation Model No. Description
• MS-DIN-2 Fiber
Amplifiers
Other
Amplifier Products
mounting bracket
MS-DIN-2 Mounting bracket for amplifier
FX-500
Accessory Communication FX-550
window seal
• FX-MB1 (Amplifier protection seal) FX-100
10 sets of 2 communication window FX-410
seals and 1 connector seal
Connector seal
LIST OF FIBERS
Refer to "Fiber Selection p.5 ~" for details of each fiber.

FX-500 SERIES Ver.2
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS
Type Standard type 2-output type Cable type (Analog output type)
PHOTO-
Model No.
ELECTRIC NPN output FX-501 FX-502 FX-505-C2

SENSORS
MICRO Item PNP output FX-501P FX-502P FX-505P-C2
PHOTO-
ELECTRIC EMC Directive, RoHS Directive
SENSORS CE marking directive compliance
AREA +10
SENSORS
Supply voltage 12 to 24 V DC-15 % Ripple P-P 10 % or less
SAFETY LIGHT Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output of cable type)
CURTAINS / Power consumption
SAFETY ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output of cable type)
COMPONENTS
PRESSURE / <NPN output type> <PNP output type>
FLOW NPN open-collector transistor PNP open-collector transistor
SENSORS Output • Maximum sink current: 100 mA • Maximum source current: 100 mA
(2-output type and cable type: (2-output type and cable type are 50 mA) (Note 2)
INDUCTIVE (2-output type and cable type are 50 mA) (Note 2)
PROXIMITY Output 1, Output 2) • Applied voltage: 30 V DC or less (between output and 0 V)
SENSORS • Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (Note 3) (at maximum sink current) • Residual voltage: 2 V or less (Note 3) (at maximum source current)
PARTICULAR
USE
SENSORS Output points 1 point 2 points
SENSOR Output operation Switchable either Light-ON or Dark-ON by L/D mode
OPTIONS
Short-circuit protection Incorporated
SIMPLE
WIRE-SAVING
UNITS Response time H-SP: 25 μs or less, FAST: 60 μs or less, STD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable
WIRE-SAVING Output current: 4 to 20 mA approx. [H-SP, FAST, STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note 4)], Response time: 2 ms or
SYSTEMS Analog output (Cable type only)
less, Zero point: Within 4 mA ±1 % F.S., Span: Within 16 mA ±5 % F.S., Linearity: Within ±3 % F.S., Load resistance: 0 to 250 Ω
MEASURE-
MENT <NPN output type> <PNP output type>
SENSORS NPN non-contact input PNP non-contact input
STATIC External input • Signal condition • Signal condition
CONTROL (2-output type only, switchable – High: +8 V to +V DC or Open High: +4 V to +V DC
DEVICES
with Output 2) Low: 0 to +1.2 V DC (at 3 mA sink current)
LASER (at 0.5 mA source current) Low: 0 to +0.6 V DC or Open
MARKERS • Input impedance: 10 kΩ approx. • Input impedance: 10 kΩ approx.
PLC – Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy
Possible external input function
lock / Display adjustment / Data bank load / Data bank save, selectable
HUMAN
MACHINE Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
INTERFACES
ENERGY
Incident light intensity display range H-SP / FAST / STD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999
MANAGEMENT
SOLUTIONS <Output 1>
Incorporated with variable OFF-delay / Incorporated with variable OFF-delay / ON-delay / One-shot / ON OFF-delay /
FA ON-delay • One-shot timer, switchable either effective or ineffective
COMPONENTS ON-delay / One-shot / ON OFF-delay /
Timer function
ON-delay • One-shot timer, switchable <Output 2>
MACHINE either effective or ineffective
VISION Incorporated with variable OFF-delay / ON-delay / One-shot timer, switchable either
SYSTEMS effective or ineffective
UV
CURING Timer range “ms”: 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.,
SYSTEMS Timer period Timer range “sec.”: 0.5 s approx., 1 to 32 s approx., 1 s approx.,
Timer range “1/10 ms”: 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx., each output is set individually
Light emitting amount selection function Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]
Interference prevention function Incorporated (Note 5), selectable either automatic interference prevention or different frequency
Selection
Guide Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading
Various settings
Fibers
saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.
Fiber Protection IP40 (IEC)

Amplifiers
Other −10 to +55 °C +14 to +131 °F [If 4 to 7 units are mounted in cascade: −10 to +50 °C +14 to +122 °F or if 8 to 16 units (cable type: 8 to 12 units)
Products Ambient temperature
are mounted in cascade: −10 to +45 °C +14 to +113 °F] (No dew condensation or icing allowed), Storage: −20 to +70 °C −4 to +158 °F
Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil)
FX-500
Material Enclosure, Case cover: Polycarbonate, Switch: Polyacetal
FX-550
Cable – 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long
FX-100
Extension up to total 100 m 328.084 ft is
FX-410 –
Cable extension possible with 0.3 mm2, or more, cable.
(however, supply voltage 12 V DC or more)
Weight Net weight: 15 g approx., Gross weight: 70 g approx. Net weight: 60 g approx., Gross weight: 100 g approx.
Accessory FX-MB1 (Amplifier protection seal): 1 set

Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
3) In case of using the quick-connection cable (cable length 5 m 16.404 ft) (optional).
4) If display adjustment was conducted, it is not in this range.
5) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.
Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.
● Number of sensor heads mountable closely (Unit: set)
Response time H-SP FAST STD LONG U-LG HYPR
IP-1 0 2 4 8 8 12
FX-500 SERIES Ver.2
92
I/O CIRCUIT AND WIRING DIAGRAMS FIBER

SENSORS
LASER
FX-501 NPN output type SENSORS
PHOTO-
I/O circuit diagram Terminal No. Wiring diagram Color code of quick-connection cable ELECTRIC
Color code of quick-connection cable SENSORS
Brown (Note 1) MICRO
(Brown) +V (Note 1) PHOTO-
1 ELECTRIC
Load SENSORS
Sensor circuit
Load Black + 12 to 24 V DC
(Black) Output + AREA
12 to 24 V DC - +10
% SENSORS
2 +10 -15
- -15
%
100 mA max. (Note 2) Blue (Note 1) SAFETY LIGHT
CURTAINS /
(Blue) 0 V (Note 1) Note: T
he quick-connection sub cable does not have a brown and a blue SAFETY
3 COMPONENTS
lead wire. PRESSURE /
FLOW
Internal circuit User’s circuit SENSORS
Terminal arrangement diagram
Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V INDUCTIVE
(blue). The power is supplied from the connector of the main cable. PROXIMITY
1 +V SENSORS
2) 50 mA max., if five amplifiers or more, are connected together.
2 Output PARTICULAR
USE
SENSORS
3 0V
SENSOR
OPTIONS
FX-501P PNP output type SIMPLE
WIRE-SAVING
I/O circuit diagram Terminal No. Wiring diagram Color code of quick-connection cable UNITS
Color code of quick-connection cable
WIRE-SAVING
(Brown) +V (Note 1) Brown (Note 1) SYSTEMS
1
MEASURE-
Sensor circuit
+ MENT
100 mA max. (Note 2) Black 12 to 24 V DC SENSORS
+ 12 to 24 V DC +10
2 +10
- -15
%
(Black) Output - -15
% Load STATIC
CONTROL
Load Blue (Note 1) DEVICES
3
(Blue) 0 V (Note 1) Note: T
he quick-connection sub cable does not have a brown and a blue
LASER
lead wire. MARKERS
Internal circuit User’s circuit
Terminal arrangement diagram PLC
Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V
(blue). The power is supplied from the connector of the main cable. 1 +V
HUMAN
2) 50 mA max., if five amplifiers or more, are connected together. MACHINE
2 Output INTERFACES
ENERGY
3 0V MANAGEMENT
SOLUTIONS
FX-502 NPN output type FA

COMPONENTS
I/O circuit diagram Terminal No. Wiring diagram Color code of quick-connection cable MACHINE
VISION
Color code of quick-connection cable SYSTEMS
Brown (Note 1)
(Brown) +V (Note 1) UV
1 Load Load CURING
White SYSTEMS
Sensor circuit
Load Load +
(White) Output 2 / External input 12 to 24 V DC
4 +10
+ 12 to 24 V DC Black - -15
%
50 mA max. (Note 2) +10
(Black) Output 1 - -15
% External
2
External Blue (Note 1) input
50 mA max. (Note 2) input
Note: T
3
(Blue) 0 V (Note 1) lead wire. Selection
Guide
Terminal arrangement diagram Fibers
Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V Fiber
1 +V Amplifiers
(blue). The power is supplied from the connector of the main cable.
Other
2) 25 mA max., if five amplifiers or more, are connected together. Products
2 Output 1 4 Output 2 / External input
3 0V FX-500
FX-502P PNP output type FX-550
Terminal No. Color code of quick-connection cable FX-100

I/O circuit diagram Wiring diagram
Color code of quick-connection cable FX-410
Brown (Note 1)
(Brown) +V (Note 1)
1 External
50 mA max. (Note 2) External Black input
input +
Sensor circuit
2 12 to 24 V DC
(Black) Output 1 + 12 to 24 V DC White - +10
%
50 mA max. (Note 2) +10
-15
- -15
% Blue Load Load
4 (Note 1)
(White) Output 2 / External input
Load Load
Note: T
3
(Blue) 0 V (Note 1) lead wire.
Terminal arrangement diagram
Notes: 1) The quick-connection sub cable does not have +V (brown) and 0 V
(blue). The power is supplied from the connector of the main cable. 1 +V
2) 25 mA max., if five amplifiers or more, are connected together.
2 Output 1 4 Output 2 / External input
3 0V
FX-500 SERIES Ver.2
FIBER
SENSORS
I/O CIRCUIT AND WIRING DIAGRAMS
LASER
SENSORS FX-505-C2 NPN output type
PHOTO-
ELECTRIC I/O circuit diagram Wiring diagram
SENSORS
Color code
MICRO (Brown) +V
PHOTO-
ELECTRIC Brown
SENSORS Load
(Pink) External input
Load
Sensor circuit
AREA
(Black) Output 1 Load Black
SENSORS + 12 to 24 V DC Load
10
- 15
% White
SAFETY LIGHT
CURTAINS / (White) Output 2 + 12 to 24 V DC
SAFETY Pink 10
COMPONENTS - 15
%
(Blue) 0 V
PRESSURE /
FLOW Blue
(Gray) Analog output (4 to 20 mA) Load (0 to 250 Ω)
SENSORS
Load (0 to 250 Ω)
INDUCTIVE Gray
PROXIMITY Internal circuit User’s circuit
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
FX-505P-C2 PNP output type
WIRE-SAVING
UNITS I/O circuit diagram Wiring diagram
Color code
WIRE-SAVING (Brown) +V
SYSTEMS
Brown
MEASURE- (Black) Output 1
MENT
SENSORS
Sensor circuit
+ Pink
(White) Output 2 12 to 24 V DC
STATIC 10
CONTROL Load - %
DEVICES (Pink) External input
15 Black
+ 12 to 24 V DC
Load White -
10
%
LASER Load 15
MARKERS (Blue) 0 V
Load
Load (0 to 250 Ω) Blue
(Gray) Analog output (4 to 20 mA)
PLC Load (0 to 250 Ω)
Gray
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Fibers
Fiber
Amplifiers
Other
Products
FX-500
FX-550
FX-100
FX-410
FX-500 SERIES Ver.2
94
SENSING CHARACTERISTICS (TYPICAL) FIBER

SENSORS
Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. LASER
SENSORS
FT-140 Thru-beam type FT-30 Thru-beam type FT-31 Thru-beam type FT-31S Thru-beam type PHOTO-
ELECTRIC
SENSORS
20,000 1,500 1,500 1,500 MICRO
787.400 HYPR 59.055 HYPR 59.055 HYPR 59.055 HYPR PHOTO-
ELECTRIC
SENSORS
Setting distance L (mm in)

15,000 STD AREA
590.550 1,000 1,000 1,000 SENSORS
39.370 39.370 39.370
SAFETY LIGHT
10,000 CURTAINS /
393.700 H-SP SAFETY
Fiber STD Fiber Fiber Fiber COMPONENTS
head 500 head 500 head 500 head
STD STD PRESSURE /
ℓ 19.685 ℓ 19.685 ℓ 19.685 ℓ FLOW
5,000
196.850 L H-SP L SENSORS
L L
Fiber H-SP H-SP Fiber
Fiber Fiber head INDUCTIVE
head head head PROXIMITY
0 0 0 0 SENSORS
1,500 1,000 500 0 500 1,000 1,500 600 400 200 0 200 400 600 800 600 400 200 0 200 400 600 800 600 400 200 0 200 400 600
59.055 39.370 19.685 19.685 39.370 59.055 23.622 15.748 7.874 7.874 15.748 23.622 31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 23.622 15.748 7.874 7.874 15.748 23.622 PARTICULAR
USE
Left Center Right Left Center Right Left Center Right Left Center Right SENSORS
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
SENSOR
OPTIONS
FT-31W Thru-beam type FT-32 Thru-beam type FT-40 Thru-beam type FT-42 Thru-beam type SIMPLE
FTA225 FTA219 WIRE-SAVING
FTA186 UNITS
1,200 FTA187 4,000 4,000 3,500
47.244 HYPR 157.480 HYPR 157.480 HYPR 137.795 HYPR WIRE-SAVING
3,000 SYSTEMS
1,000
118.110
39.370

3,000 3,000 MEASURE-
118.110 STD 118.110 2,500
800 98.425 MENT
31.496 SENSORS
2,000
600 2,000 2,000 78.740 STD STATIC
23.622 78.740 78.740 CONTROL
STD Fiber Fiber
STD Fiber 1,500 Fiber DEVICES
head head head 59.055 head
400 ℓ
15.748 ℓ ℓ 1,000 ℓ LASER
1,000 H-SP 1,000
L 39.370 L 39.370 L
39.370 L
MARKERS
200 H-SP 500
7.874 Fiber Fiber H-SP Fiber H-SP Fiber
head head head
19.685
head PLC
0 0 0 0
300 200 100 0 100 200 300 400 200 0 200 400 2,000 1,000 0 1,000 2,000 2,000 1,000 0 1,000 2,000
11.811 7.874 3.937 3.937 7.874 11.811 15.748 7.874 7.874 15.748 78.740 39.370 39.370 78.740 78.740 39.370 39.370 78.740 HUMAN
Left Center Right Left Center Right Left Center Right Left Center Right MACHINE
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FT-42S Thru-beam type FT-42W Thru-beam type FT-43 Thru-beam type FT-45X Thru-beam type
FTA180 FTA224 FTA221 FA
COMPONENTS
3,000 4,000 2,500 1,500
118.110 HYPR 157.480 HYPR 98.425 HYPR 59.055 HYPR MACHINE
VISION
2,500 SYSTEMS
98.425 2,000
STD
3,000
78.740
118.110 UV
2,000 STD 1,000 CURING
78.740 1,500 39.370 SYSTEMS
59.055
1,500 2,000
59.055 STD
78.740 Fiber Fiber Fiber
Fiber STD head 1,000 head head
1,000 head
ℓ 39.370 500 H-SP
H-SP ℓ 19.685 ℓ
39.370 H-SP ℓ 1,000 L L
L 39.370 500 L
500 Fiber H-SP Fiber 19.685
19.685 Fiber Fiber Selection
head head head Guide
head
0 0 0 0
2,000 1,000 0 1,000 2,000 1,500 1,000 500 0 500 1,000 1,500 2,000 1,000 0 1,000 2,000 1,500 1,000 500 0 500 1,000 1,500 Fibers
78.740 39.370 39.370 78.740 59.055 39.370 19.685 19.685 39.370 59.055 78.740 39.370 39.370 78.740 59.055 39.370 19.685 19.685 39.370 59.055
Fiber
Left Center Right Left Center Right Left Center Right Left Center Right Amplifiers
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Other
Products
FT-A11 Thru-beam type FT-A11W Thru-beam type

FTA183 FTA192 FX-500
Horizontal direction
FTA185 Vertical direction
FTA179 Horizontal direction Vertical direction FX-550
4,000 4,000 4,000 4,000
157.480 157.480 157.480 157.480 FX-100
HYPR HYPR HYPR HYPR
FX-410

3,000 STD 3,000 STD 3,000 STD 3,000 STD

118.110 118.110 118.110 118.110

H-SP H-SP
2,000 2,000 2,000 2,000
78.740 Fiber 78.740 Fiber 78.740 Fiber 78.740 Fiber
H-SP head H-SP head head head
ℓ 8mm ℓ ℓ 8mm ℓ
1,000 1,000 0.315in L 1,000 1,000 0.315in L
39.370 L 39.370 39.370 L 39.370
Fiber Fiber Fiber Fiber
head head head head
0 0 0 0
400 300 200 100 0 100 200 300 400 400 300 200 100 0 100 200 300 400 600 400 200 0 200 400 600 600 400 200 0 200 400 600
15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748 15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748 23.622 15.748 7.874 7.874 15.748 23.622 23.622 15.748 7.874 7.874 15.748 23.622
Left Center Right Down Center Up Left Center Right Down Center Up
FTA162 FTA162 FTA217 FTA217

FX-500 SERIES Ver.2
FIBER
SENSORS
SENSING CHARACTERISTICS (TYPICAL)
LASER Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. (Models with same sensing characteristics are grouped together.)
SENSORS
PHOTO- FT-A32 Thru-beam type FT-A32W Thru-beam type

ELECTRIC
SENSORS
MICRO Horizontal direction Vertical direction Horizontal direction Vertical direction
PHOTO-
ELECTRIC 4,000 4,000 4,000 4,000
SENSORS 157.480 157.480 157.480 157.480
HYPR HYPR HYPR HYPR
AREA STD STD
SENSORS

3,000 3,000 3,000 3,000

STD STD
SAFETY LIGHT 118.110 118.110 118.110 H-SP 118.110 H-SP
CURTAINS / Fiber
SAFETY H-SP H-SP head
COMPONENTS 2,000 2,000 2,000 2,000
78.740 Fiber 78.740 Fiber 78.740 ℓ 78.740 Fiber
PRESSURE /
FLOW head head head
SENSORS L
ℓ 19mm ℓ 19mm ℓ
1,000 1,000 0.748in L 1,000 1,000 0.748in L
INDUCTIVE 39.370 39.370 39.370
PROXIMITY L 39.370
Fiber
SENSORS Fiber Fiber head Fiber
head head head
PARTICULAR 0 0 0 0
USE 300 200 100 0 100 200 300 300 200 100 0 100 200 300 300 200 100 0 100 200 300 300 200 100 0 100 200 300
SENSORS 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811
SENSOR Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
OPTIONS
SIMPLE
WIRE-SAVING
UNITS FT-AL05 Thru-beam type
FTA216
FT-E13 Thru-beam type FT-E23 Thru-beam type
FTA218
FTA216 FTA218
WIRE-SAVING
SYSTEMS
Horizontal direction Vertical direction
2,500 2,500 60 300
MEASURE- 98.425 HYPR 98.425 HYPR 2.362 HYPR 11.811 HYPR
MENT
SENSORS 50 250
2,000 2,000 1.969 9.843

STATIC 78.740 78.740

CONTROL 40 200
DEVICES 1.575 7.874
1,500 1,500
59.055 59.055
LASER STD STD 30 STD 150 STD
MARKERS Fiber 1.181 5.906
1,000 Fiber 1,000 head Fiber Fiber
39.370 head 39.370 20 head 100 head
ℓ 0.787 ℓ 3.937 ℓ
PLC H-SP H-SP 36mm
500 L 500 ℓ L L L
19.685 19.685 1.417in 10 50 H-SP
Fiber 0.394 H-SP Fiber 1.969 Fiber
HUMAN head Fiber head head
MACHINE head
INTERFACES 0 0 0 0
1,500 1,000 500 0 500 1,000 1,500 1,500 1,000 500 0 500 1,000 1,500 30 20 10 0 10 20 30 150 100 50 0 50 100 150
ENERGY 59.055 39.370 19.685 19.685 39.370 59.055 59.055 39.370 19.685 19.685 39.370 59.055 1.181 0.787 0.394 0.394 0.787 1.181 5.906 3.937 1.969 1.969 3.937 5.906
MANAGEMENT Left Center Right Down Center Up Left Center Right Left Center Right
SOLUTIONS Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FA
COMPONENTS
FT-H13-FM2 Thru-beam type FT-H20-J20-S FT-H20-J30-S Thru-beam FT-H20-M1 Thru-beam type
MACHINE FTA215 FT-H20-J50-S FTA215 type FTA222
VISION
SYSTEMS
FTA223
4,000 2,000 2,000
157.480 Fiber 78.740 Fiber 78.740
UV head head
CURING
ℓ
HYPR
SYSTEMS ℓ
L
3,000 1,500 L 1,500

118.110 Fiber 59.055 Fiber 59.055
head head
HYPR STD
2,000 HYPR 1,000 1,000
78.940 39.370 STD 39.370
Fiber
Selection STD head
Guide
1,000 500 H-SP 500 ℓ
Fibers 39.370 H-SP 19.685 19.685 H-SP L
Fiber
Fiber head
Amplifiers 0 0 0
Other 1,000 500 0 500 1,000 800 400 0 400 800 2,000 1,000 0 1,000 2,000
Products 39.370 19.685 19.685 39.370 31.496 15.748 15.748 31.496 78.740 39.370 39.370 78.740
Left Center Right Left Center Right Left Center Right
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-500
FX-550 FT-H20-VJ50-S FT-H20-VJ80-S Thru-beam type FT-H20W-M1 Thru-beam type FT-H30-M1V-S Thru-beam type
FX-100
FX-410
2,000
Fiber head 78.740
ℓ L
HYPR
2,000 2,000 1,000
1,500
78.740 HYPR 78.740 Fiber head 39.370

59.055
HYPR
HYPR
STD
STD 1,000
Fiber STD 39.370 STD
1,000 head 1,000 500 Fiber
39.370 39.370 Fiber 19.685 head
H-SP ℓ head ℓ
H-SP 500 H-SP
L 19.685 ℓ L
H-SP L
Fiber Fiber Fiber
head head head
0 0 0 0
400 200 0 200 400 400 200 0 200 400 800 400 0 400 800 800 400 0 400 800
15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 31.496 15.748 15.748 31.496 31.496 15.748 15.748 31.496
Left Center Right Down Center Up Left Center Right Left Center Right
FX-500 SERIES Ver.2
96

SENSORS
Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. (Models with same sensing characteristics are grouped together.) LASER
SENSORS
FT-H35-M2 FT-HL80Y Thru-beam type FT-KS40 Thru-beam type PHOTO-

Thru-beam type ELECTRIC
FT-H35-M2S6 SENSORS
2,000 4,000 4,000 MICRO
78.740 157.480 157.480 HYPR PHOTO-
ELECTRIC
HYPR SENSORS

1,500 3,000 3,000 STD AREA
59.055 HYPR 118.110 118.110 SENSORS
STD
SAFETY LIGHT
1,000 2,000 2,000 Fiber CURTAINS /
39.370 78.740 78.740 head SAFETY
STD H-SP H-SP COMPONENTS
Fiber Fiber ℓ PRESSURE /
500 head 1,000 head 1,000 FLOW
19.685 H-SP ℓ ℓ L SENSORS
39.370 39.370
L L Fiber
Fiber Fiber INDUCTIVE
head head head PROXIMITY
0 0 0 SENSORS
1,000 500 0 500 1,000 800 400 0 400 800 100 50 0 50 100
39.370 19.685 19.685 39.370 31.496 15.748 15.748 31.496 3.937 1.969 1.969 3.937 PARTICULAR
Left Center Right Left Center Right Left Center Right USE
Operating point ℓ (mm in) Operating point ℓ (mm in) SENSORS
Operating point ℓ (mm in)
SENSOR
OPTIONS
FT-KV26 Thru-beam type FT-KV26H1FTA208 Thru-beam type SIMPLE
WIRE-SAVING
UNITS
Horizontal direction Vertical direction Horizontal direction Vertical direction
3,000 3,000 3,000 3,000 WIRE-SAVING
SYSTEMS
118.110 118.110 118.110 118.110
HYPR HYPR
2,500 2,500 2,500 2,500 MEASURE-
98.425 98.425 98.425 HYPR 98.425 HYPR MENT

SENSORS
2,000 2,000 2,000 2,000
78.740 78.740 78.740 78.740 STATIC
CONTROL
1,500 1,500 1,500 1,500 DEVICES
STD STD
59.055 59.055 59.055 Fiber 59.055
Fiber Fiber Fiber
head head LASER
1,000 head 1,000 1,000 STD ℓ 1,000 STD head MARKERS
ℓ
39.370 H-SP 39.370 H-SP 39.370 39.370
ℓ L L ℓ L
500 L 500 500 500
Fiber PLC
19.685 Fiber 19.685 Fiber 19.685 H-SP 19.685 H-SP Fiber
head head head
head
0 0 0 0 HUMAN
80 60 40 20 0 20 40 60 80 80 60 40 20 0 20 40 60 80 80 60 40 20 0 20 40 60 80 80 60 40 20 0 20 40 60 80 MACHINE
3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 INTERFACES
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) ENERGY
MANAGEMENT
SOLUTIONS
FT-KV40 FTA209 Thru-beam type

FTA209 FT-KV40W Thru-beam type FA
COMPONENTS
Horizontal direction Vertical direction Horizontal direction Vertical direction MACHINE

VISION
SYSTEMS
4,000 4,000 4,000 4,000
157.480 157.480 157.480 157.480 UV
HYPR HYPR HYPR HYPR
CURING
SYSTEMS

3,000 STD 3,000 STD 3,000 STD 3,000 STD

118.110 118.110 118.110 118.110
2,000 H-SP 2,000 H-SP 2,000 H-SP 2,000 H-SP

78.740 78.740 78.740 78.740
head head head head Selection
ℓ ℓ Guide
1,000 1,000 1,000 1,000
39.370 39.370 ℓ L 39.370 39.370 ℓ L Fibers
L L
Fiber Fiber Fiber Fiber Fiber
head head head head Amplifiers
0 0 0 0
100 50 0 50 100 100 50 0 50 100 100 50 0 50 100 100 50 0 50 100 Other
3.937 1.969 1.969 3.937 3.937 1.969 1.969 3.937 3.937 1.969 1.969 3.937 3.937 1.969 1.969 3.937 Products
FX-500
FT-L80Y Thru-beam type

FTA205 FT-R31 Thru-beam type
FTA205 FT-R40 Thru-beam type
FTA206 FX-550
FTA206 FX-100
FX-410
4,000 1,200 4,000
157.480 47.244 157.480 HYPR
HYPR 1,000
39.370
3,000 3,000
118.110 STD 800 HYPR 118.110
31.496
H-SP
2,000 600 2,000
78.740 23.622 Fiber 78.740
Fiber
head head
Fiber 400 STD STD
head 15.748 ℓ
1,000 ℓ 1,000
39.370 ℓ L 39.370 L
L 200
Fiber 7.874 H-SP Fiber H-SP Fiber
head head head
0 0 0
800 400 0 400 800 600 400 200 0 200 400 600 1,500 1,000 500 0 500 1,000 1,500
31.496 15.748 15.748 31.496 23.622 15.748 7.874 7.874 15.748 23.622 59.055 39.370 19.685 19.685 39.370 59.055
FX-500 SERIES Ver.2
FIBER
SENSORS
LASER Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No.
SENSORS
PHOTO- FT-R41W Thru-beam type FT-R42W Thru-beam type

ELECTRIC
SENSORS
PHOTO-
ELECTRIC 3,500 3,500 4,000 4,000
SENSORS 137.795 HYPR 137.795 HYPR 157.480 HYPR 157.480 HYPR
AREA 3,000 3,000
SENSORS 118.110 118.110

STD

3,000 3,000 STD
2,500 2,500 118.110 118.110
SAFETY LIGHT 98.425 98.425
CURTAINS /
SAFETY 2,000 2,000
COMPONENTS 78.740 78.740 2,000 2,000
PRESSURE / 1,500 Fiber 1,500 78.740 Fiber 78.740 Fiber
FLOW
Fiber H-SP H-SP
59.055 STD head 59.055 STD head head head
SENSORS
1,000 ℓ 1,000 1,000 ℓ 1,000 ℓ
INDUCTIVE 39.370 39.370 ℓ
H-SP L H-SP L 39.370 L 39.370 L
PROXIMITY 500 500
SENSORS Fiber Fiber Fiber Fiber
19.685 head 19.685 head head
head
PARTICULAR 0 0
USE 0 1,500 1,000 500 0 500 1,000 1,500 0 1,500 1,000 500 0 500 1,000 1,500 1,000 500 0 500 1,000 1,000 500 0 500 1,000
SENSORS 59.055 39.370 19.685 19.685 39.370 59.055 59.055 39.370 19.685 19.685 39.370 59.055 39.370 19.685 19.685 39.370 39.370 19.685 19.685 39.370
OPTIONS
SIMPLE
WIRE-SAVING
UNITS FT-R43 FTA193
Thru-beam type FT-R44Y Thru-beam type FT-R60Y FTA194
Thru-beam type FT-S11 FTA194
Thru-beam type
FTA193
WIRE-SAVING
SYSTEMS
MEASURE- 3,500 3,500 4,000 400

MENT 137.795 137.795 157.480 HYPR 15.748 HYPR
SENSORS 3,000 HYPR 3,000
118.110 118.110 HYPR

STATIC 3,000
300
CONTROL 2,500 2,500 118.110 11.811
DEVICES 98.425 98.425
2,000 2,000
LASER 78.740 78.740 2,000 200
MARKERS 78.740 7.874
1,500 Fiber 1,500 Fiber STD Fiber STD Fiber
59.055 STD head 59.055 STD head head
head
PLC 1,000 1,000 ℓ
ℓ ℓ 1,000 ℓ 100
39.370 L 39.370 39.370 L 3.937 L
L
500 H-SP 500 H-SP Fiber H-SP Fiber
HUMAN 19.685 Fiber 19.685 H-SP Fiber
MACHINE head head head head
0 0
INTERFACES 0 1,500 0 1,500
1,000 500 0 500 1,000 1,500 1,000 500 0 500 1,000 1,500 1,000 500 0 500 1,000 150 100 50 0 50 100 150
ENERGY 59.055 39.370 19.685 19.685 39.370 59.055 59.055 39.370 19.685 19.685 39.370 59.055 39.370 19.685 19.685 39.370 5.906 3.937 1.969 1.969 3.937 5.906
MANAGEMENT Left Center Right Left Center Right Left Center Right Left Center Right
FA
COMPONENTS
MACHINE FT-S20 Thru-beam type FT-S21 Thru-beam type FT-S21W Thru-beam type
FTA226 FT-S22 Thru-beam type
FTA178
VISION
SYSTEMS
UV
CURING 1,500 1,500 1,200 1,600
SYSTEMS 59.055 59.055 47.244 62.992
HYPR HYPR HYPR
1,000
39.370 HYPR
1,200
1,000 800 47.244
1,000
39.370 39.370 31.496
Selection 600 800 Fiber

Fiber Fiber Fiber 31.496
Guide head 23.622 head head
STD head
STD
Fibers 500 500 STD 400 STD
19.685 ℓ 19.685 ℓ 15.748 ℓ ℓ
400
Fiber L L L 15.748 L
Amplifiers 200 H-SP
H-SP Fiber H-SP Fiber 7.874 Fiber Fiber
Other
H-SP head
head head head
Products 0 0 0
0
600 400 200 0 200 400 600 800 600 400 200 0 200 400 600 800 300 200 100 0 100 200 300 100 50 0 50 100
23.622 15.748 7.874 7.874 15.748 23.622 31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 11.811 7.874 3.937 3.937 7.874 11.811 3.937 1.969 1.969 3.937
Left Center Right Operating point ℓ (mm in)
FX-500 Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-550
FX-100 FT-S30 Thru-beam type

FTA227 FT-S31W Thru-beam type FT-S32 Thru-beam type
FTA182
FX-410
FTA220
4,000 4,000 4,000
157.480 HYPR 157.480 HYPR 157.480 HYPR
STD
3,000 3,000 3,000

118.110 118.110 118.110
2,000 2,000 2,000

78.740 Fiber 78.740 78.740
STD head Fiber H-SP Fiber
head head
ℓ STD ℓ ℓ
1,000 1,000 1,000
39.370 L 39.370 L 39.370 L
H-SP Fiber
H-SP Fiber Fiber
head head head
0 0 0
2,000 1,000 0 1,000 2,000 1,500 1,000 500 0 500 1,000 1,500 1,000 500 0 500 1,000
78.740 39.370 39.370 78.740 59.055 39.370 19.685 19.685 39.370 59.055 39.370 19.685 19.685 39.370
FX-500 SERIES Ver.2
98

SENSORS
Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No. LASER
SENSORS
FT-V23 Thru-beam type FT-V24W Thru-beam type PHOTO-

ELECTRIC
SENSORS
Horizontal direction Vertical direction Horizontal direction Vertical direction MICRO
PHOTO-
2,000 2,000 400 400 ELECTRIC
78.740 78.740 15.748 15.748 SENSORS
HYPR HYPR HYPR HYPR
AREA
SENSORS

1,500 1,500 300 300

59.055 59.055 11.811 11.811 SAFETY LIGHT
STD CURTAINS /
SAFETY
1,000 STD 1,000 STD 200 200 COMPONENTS
39.370 39.370 7.874 7.874 STD PRESSURE /
head head FLOW
head ℓ head ℓ SENSORS
ℓ ℓ
500 500 100 100
19.685 H-SP L 19.685 H-SP L 3.937 H-SP L 3.937 H-SP L INDUCTIVE
PROXIMITY
Fiber Fiber Fiber Fiber SENSORS
head head head head
0 0 0 0
PARTICULAR
800 600 400 200 0 200 400 600 800 800 600 400 200 0 200 400 600 800 200 100 0 100 200 200 100 0 100 200 USE
31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 7.874 3.937 3.937 7.874 7.874 3.937 3.937 7.874 SENSORS
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) SENSOR
OPTIONS
FTA188 SIMPLE
FTA190 FTA188 WIRE-SAVING
FT-V25 FTA190 Thru-beam type FT-V30 Thru-beam type UNITS
WIRE-SAVING
Horizontal direction Vertical direction Horizontal direction Vertical direction SYSTEMS
1,000 1,000 2,500 2,500 MEASURE-

39.370 39.370 98.425 98.425 MENT
HYPR HYPR HYPR HYPR SENSORS
800 800 2,000 2,000
STATIC

31.496 31.496 78.740 78.740 CONTROL
DEVICES
600 600 1,500 1,500
23.622 STD 23.622 STD 59.055 59.055 LASER
STD STD
MARKERS
400 Fiber 400 Fiber 1,000 Fiber 1,000 Fiber
15.748 head 15.748 ℓ
head 39.370 head 39.370 head
ℓ ℓ ℓ
PLC
200 H-SP L 200 H-SP L 500 H-SP 500 H-SP L
7.874 7.874 L
19.685 19.685 HUMAN
head head head head MACHINE
0 0 0 0 INTERFACES
300 200 100 0 100 200 300 300 200 100 0 100 200 300 1,000 500 0 500 1,000 1,000 500 0 500 1,000
11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811 39.370 19.685 19.685 39.370 39.370 19.685 19.685 39.370 ENERGY
Left Center Right Down Center Up Left Center Right Down Center Up MANAGEMENT
Operating point ℓ (mm in) SOLUTIONS
FA
COMPONENTS
FTA189 FTA191
FT-V40 FTA189 Thru-beam type FT-V80Y FTA191 Thru-beam type MACHINE
VISION
SYSTEMS
Horizontal direction Vertical direction Horizontal direction Vertical direction UV
CURING
4,000 4,000 4,000 4,000 SYSTEMS
157.480 157.480 157.480 157.480
HYPR HYPR HYPR HYPR

3,000 STD 3,000 STD 3,000 3,000

118.110 118.110 118.110 118.110
STD STD
2,000 2,000 2,000 2,000 Selection

H-SP H-SP Guide
78.740 78.740 78.740 78.740
Fiber Fiber H-SP
head head Fibers
ℓ H-SP Fiber head
1,000 1,000 ℓ 1,000 Fiber head
1,000 Fiber
39.370 L 39.370 ℓ L 39.370 39.370 ℓ Amplifiers
L L
Fiber Fiber Other
head head Fiber head Fiber head Products
0 0 0 0
300 200 100 0 100 200 300 300 200 100 0 100 200 300 800 400 0 400 800 800 400 0 400 800
11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811 31.496 15.748 15.748 31.496 31.496 15.748 15.748 31.496
Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-500
Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-550
FX-100
FT-Z20HBWFTA207
Thru-beam type FT-Z20W Thru-beam type
FTA207 FX-410
1,200 2,000 2,000
47.244 HYPR 78.740 HYPR 78.740 HYPR
1,000
39.370
1,500 1,500
800 59.055 59.055
31.496
600 Fiber 1,000 STD 1,000 STD
23.622 head 39.370 Fiber 39.370 Fiber
head head
400 STD ℓ
15.748 ℓ
H-SP L 500 500 1.2mm ℓ
L
19.685 L 19.685 0.047in
200
7.874 Fiber H-SP Fiber H-SP
Fiber
head head head
0 0 0
600 400 200 0 200 400 600 400 300 200 100 0 100 200 300 400 400 300 200 100 0 100 200 300 400
23.622 15.748 7.874 7.874 15.748 23.622 15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748 15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748
Left Center Right Left Center Right Down Center Up
FTA294
FX-500 SERIES Ver.2
FIBER
SENSORS
LASER Thru-beam type Parallel deviation Sensing characteristics are listed in the alphabetic order of Model No.
SENSORS
PHOTO- FT-Z30 Thru-beam type FT-Z30E Thru-beam type

ELECTRIC
SENSORS
PHOTO-
ELECTRIC 4,000 4,000 4,000 4,000
AREA
SENSORS

STD STD 3,000 3,000
3,000 3,000

STD STD
118.110 118.110 118.110 118.110
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS 2,000 2,000 2,000 2,000
78.740 78.740 78.740 Fiber 78.740 Fiber
PRESSURE / H-SP Fiber H-SP Fiber H-SP
FLOW head head H-SP ℓ head
head
SENSORS ℓ ℓ ℓ
1,000 1,000 1,000 1,000 L
INDUCTIVE L L 39.370 39.370 5.5mm
39.370 2.2mm 39.370 5.5mm L
0.217in
PROXIMITY 0.217in
SENSORS 0.087in Fiber Fiber Fiber
Fiber head
head head head
0 0 0
PARTICULAR 0
USE 1,000 500 0 500 1,000 1,000 500 0 500 1,000 300 200 100 0 100 200 300 300 200 100 0 100 200 300
SENSORS 39.370 19.685 19.685 39.370 39.370 19.685 19.685 39.370 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811
SENSOR
OPTIONS
SIMPLE FT-Z30EW Thru-beam type FT-Z30H Thru-beam type

WIRE-SAVING FTA198
UNITS FTA198 FTA163 FTA163
WIRE-SAVING
SYSTEMS 4,000 4,000 4,000 4,000
157.480 HYPR 157.480 HYPR 157.480 HYPR 157.480 HYPR
MEASURE-
MENT

SENSORS 3,000 STD 3,000 STD 3,000 STD 3,000 STD

118.110 118.110 118.110 118.110
STATIC
CONTROL
DEVICES 2,000 Fiber
2,000 2,000 2,000
78.740 Fiber 78.740 Fiber 78.740 Fiber 78.740 head
LASER H-SP head H-SP ℓ head H-SP head H-SP
MARKERS ℓ
ℓ ℓ
1,000 1,000 L 1,000 1,000 L
5.5mm 39.370 5.5mm
39.370 L 39.370 39.370 L 0.217in
PLC 0.217in
head head head head
0 0 0 0
HUMAN 400 200 0 200 400
MACHINE 400 200 0 200 400 400 200 0 200 400 400 200 0 200 400
INTERFACES 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748
ENERGY Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
MANAGEMENT
SOLUTIONS
FA FT-Z30HW FTA200
Thru-beam type FT-Z30W FTA201 Thru-beam type
COMPONENTS
FTA200 FTA201
MACHINE Horizontal direction Vertical direction Horizontal direction Vertical direction
VISION
SYSTEMS 4,000 4,000 4,000 4,000
UV
CURING
SYSTEMS

3,000 STD 3,000 STD 3,000 STD 3,000 STD

118.110 118.110 118.110 118.110
2,000 2,000 Fiber 2,000 2,000

78.740 Fiber 78.740 head 78.740 78.740 Fiber
head H-SP Fiber H-SP
H-SP H-SP head head
Selection ℓ ℓ ℓ
Guide ℓ
1,000 1,000 L 1,000 1,000
39.370 39.370 5.5mm 39.370 L 39.370 L
Fibers L 0.217in 2.2mm 5.5mm
Fiber 0.087in Fiber 0.217in
Fiber Fiber
Fiber head head head head
Amplifiers 0 0 0 0
Other 400 200 0 200 400 400 200 0 200 400 1,000 500 0 500 1,000 1,000 500 0 500 1,000
Products 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 39.370 19.685 19.685 39.370 39.370 19.685 19.685 39.370
FX-500
FX-550 FT-Z40W Thru-beam type FT-Z40HBW Thru-beam type FT-Z802Y Thru-beam type
FTA202 FTA202 FTA199 FTA199
FX-100 Horizontal direction Vertical direction
FX-410 4,000 4,000 4,000 4,000
157.480 HYPR 157.480 HYPR 157.480 HYPR 157.480
HYPR

3,000 3,000 3,000 3,000

118.110 118.110 118.110 118.110 STD
2,000 STD 2,000 STD 2,000 Fiber 2,000 H-SP

78.740 Fiber 78.740 Fiber 78.740 head 78.740
head head Fiber
ℓ STD head
1,000 1,000 1.2mm 1,000 ℓ 1,000 ℓ
L ℓ H-SP L L
39.370 39.370 0.047in L 39.370 39.370
H-SP Fiber H-SP Fiber Fiber
Fiber head
head head head
0 0 0 0
800 600 400 200 0 200 400 600 800 800 600 400 200 0 200 400 600 800 1,500 1,000 500 0 500 1,000 1,500 800 400 0 400 800
31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 31.496 23.622 15.748 7.874 7.874 15.748 23.622 31.496 59.055 39.370 19.685 19.685 39.370 59.055 31.496 15.748 15.748 31.496
FTA295 FTA295 FTA204

FX-500 SERIES Ver.2
100

SENSORS
Retroreflective type Parallel deviation Sensing characteristics are listed in the alphabetic order of the Model No. LASER
SENSORS
FR-KZ22E Retroreflective type FR-KZ50E Retroreflective type PHOTO-

ELECTRIC
SENSORS
PHOTO-
600 600 1,200 1,200 ELECTRIC
23.622 23.622 47.244 47.244 SENSORS
HYPR HYPR HYPR HYPR
500 500 1,000 1,000 AREA
19.685 19.685 39.370 39.370 SENSORS


400 STD 400 STD 800 800 SAFETY LIGHT
15.748 15.748 31.496 31.496 CURTAINS /
SAFETY
300 300 600 600 COMPONENTS
11.811 11.811 23.622 Reflector 23.622 Reflector
Reflector STD STD RF-003 PRESSURE /
Reflector RF-003 FLOW
200 200 400 ℓ 400 ℓ SENSORS
H-SP H-SP ℓ 3mm
7.874 ℓ 7.874 L 15.748 H-SP 15.748 H-SP
L L 0.118in L INDUCTIVE
100 100 200 200 PROXIMITY
3.937 Fiber 3.937 Fiber 7.874 7.874 Fiber SENSORS
head Fiber
head head head
0 0 0 0 PARTICULAR
20 10 0 10 20 20 10 0 10 20 10 5 0 5 10 10 5 0 5 10 USE
0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 0.394 0.197 0.197 0.394 0.394 0.197 0.197 0.394 SENSORS
OPTIONS
FR-KZ50H Retroreflective type SIMPLE

FRA014 FRA012 WIRE-SAVING
FRA014 FRA012 UNITS
WIRE-SAVING
1,200 1,200 SYSTEMS
47.244 47.244
HYPR HYPR
1,000 1,000 MEASURE-
39.370 39.370 MENT
SENSORS
800 800
31.496 31.496 STATIC
CONTROL
600 600 DEVICES
23.622 23.622 Reflector
STD Reflector STD RF-003
RF-003 LASER
400 ℓ 400 ℓ MARKERS
15.748 H-SP 15.748 H-SP
L L
200 200 PLC
7.874 Fiber 7.874 Fiber
head head
0 0 HUMAN
20 10 0 10 20 20 10 0 10 20 MACHINE
0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787 INTERFACES
Left Center Right Down Center Up
Operating point ℓ (mm in) Operating point ℓ (mm in) ENERGY
MANAGEMENT
SOLUTIONS
FR-Z50HW Retroreflective type
FA
FRA013 COMPONENTS
With reflective tape RF-13 (attached) FRA013 With reflector RF-230 (optional)
MACHINE
Horizontal direction Vertical direction Horizontal direction Vertical direction VISION
SYSTEMS
2,000 2,000 4,000 4,000
78.740 HYPR 78.740 HYPR 157.480 HYPR 157.480 HYPR UV
CURING
SYSTEMS
1,500 1,500 3,000 3,000

59.055 STD 59.055 STD 118.110 STD 118.110 STD
1,000 1,000 2,000 H-SP 2,000 H-SP

39.370 39.370 78.740 78.740
H-SP Reflective tape H-SP Reflective tape Reflector Reflector
Selection
RF-13 RF-13 RF-230 RF-230
Guide
ℓ ℓ ℓ ℓ
500 500 1,000 1,000
19.685 L 19.685 L 39.370 L 39.370 L Fibers
Fiber Fiber Fiber Fiber Fiber
head head head head Amplifiers
0 0 0 0
150 100 50 0 50 100 150 150 100 50 0 50 100 150 400 300 200 100 0 100 200 300 400 400 300 200 100 0 100 200 300 400 Other
Products
5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748 15.748 11.811 7.874 3.937 3.937 7.874 11.811 15.748
FX-500
Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No. FX-550
FRA010 FRA010 FRA011 FX-100
FD-30 Reflective type FD-31 FRA011 Reflective type
FX-410
800 800 600 600
500 500
600 600 19.685 19.685

23.622 23.622 400 400

15.748 15.748
400 STD White 400 STD White 300 STD White 300 STD White
15.748 non-glossy paper 15.748 non-glossy paper 11.811 non-glossy paper 11.811 non-glossy paper
ℓ ℓ ℓ ℓ
200 200
L L 7.874 L 7.874 L
200 200
7.874 Fiber 7.874 Fiber Fiber Fiber
H-SP head H-SP head 100 H-SP head 100 H-SP head
Up 3.937 3.937 Up
Left Right Down Left Right Down
0 0 0 0
150 100 50 0 50 100 150 150 100 50 0 50 100 150 150 100 50 0 50 100 150 150 100 50 0 50 100 150
5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906
FX-500 SERIES Ver.2
FIBER
SENSORS
LASER Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No. (Models with same sensing characteristics are grouped together.)
SENSORS
PHOTO- FD-31W Reflective type FD-32G Reflective type FD-32GX Reflective type
ELECTRIC
SENSORS
MICRO
PHOTO- 400 400 800 800
ELECTRIC
AREA Setting distance L (mm in)
SENSORS

300 300 600 600

11.811 11.811 23.622 23.622
SAFETY LIGHT
CURTAINS /
SAFETY
COMPONENTS 200 STD White 200 STD White 400 STD 400 STD
White White
7.874 non-glossy paper 7.874 non-glossy paper 15.748 non-glossy paper 15.748 non-glossy paper
PRESSURE / ℓ
FLOW ℓ ℓ ℓ
SENSORS
H-SP H-SP
H-SP L H-SP L L L
100 100 200 200
INDUCTIVE head head
PROXIMITY head head
SENSORS Up
Left Right Down Left Right Left Right
0 0 0 0
PARTICULAR 60 40 20 0 20 40 60 60 40 20 0 20 40 60 200 100 0 100 200 200 100 0 100 200
USE
SENSORS 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362 7.874 3.937 3.937 7.874 7.874 3.937 3.937 7.874
OPTIONS
SIMPLE FD-34G FD-S34G Reflective type FD-40 Reflective type

WIRE-SAVING
FDA217 FDA233
UNITS FDA217 FDA234
WIRE-SAVING
SYSTEMS 400 800 800
15.748 FD-34G HYPR FD-S34G 31.496 HYPR 31.496 HYPR
MEASURE- White non-glossy paper White non-glossy paper
MENT ℓ ℓ
SENSORS
300 600 600

11.811 L L 23.622 23.622

STATIC Fiber Fiber
CONTROL head head
DEVICES White
200 400 STD non-glossy paper 400 STD White
7.874 Left Right Left Right 15.748 15.748 non-glossy paper
LASER ℓ
MARKERS ℓ
STD L
L
100 200 Fiber 200
3.937 7.874 7.874 Fiber
PLC head head
H-SP H-SP
H-SP Up
Left Right Down
HUMAN 0 0 0
MACHINE 60 40 20 0 20 40 60 150 100 50 0 50 100 150 150 100 50 0 50 100 150
INTERFACES 2.362 1.575 0.787 0.787 1.575 2.362 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906
ENERGY Left Center Right Left Center Right Down Center Up
MANAGEMENT Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
SOLUTIONS
FA FD-41 Reflective type FD-41S Reflective type

COMPONENTS FDA261
MACHINE Horizontal direction Vertical direction Horizontal direction Vertical direction
VISION
600 600 600
FDA261 600
SYSTEMS White non-glossy paper
UV ℓ
CURING 500 500 500 500 L
SYSTEMS 19.685 19.685 19.685 19.685

Fiber
400 400 400 400 head
15.748 15.748 15.748 15.748 Up
Down
300 STD White 300 STD White 300 STD White 300 STD
11.811 non-glossy paper 11.811 non-glossy paper 11.811 non-glossy paper 11.811
ℓ ℓ ℓ
Selection 200 200 200 200
7.874 L 7.874 L 7.874 H-SP L 7.874 H-SP
Guide
Fiber Fiber Fiber
Fibers 100 H-SP head 100 H-SP head 100 head 100
3.937 3.937 Up 3.937 3.937
Fiber Left Right Down Left Right
Amplifiers 0 0 0 0
150 100 50 0 50 100 150 150 100 50 0 50 100 150 100 50 0 50 100 100 50 0 50 100
Other 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 3.937 1.969 1.969 3.937 3.937 1.969 1.969 3.937
Products Down Center Up Left Center Right Down Center Up
Left Center Right
FX-500
FX-550 FD-41SW FDA258 Reflective type

FDA258 FD-41W Reflective type
FDA223 FDA223
FX-100 Horizontal direction Vertical direction Horizontal direction Vertical direction
FX-410 400 400 1,000 1,000
800 800
300 300
31.496
31.496
11.811 11.811
600 600
23.622 23.622
200 STD 200 STD STD White STD White
7.874 White non-glossy paper 7.874 White non-glossy paper non-glossy paper non-glossy paper
ℓ ℓ 400 ℓ 400 ℓ
15.748 15.748
L L L L
100 100
3.937 Fiber 3.937 Fiber 200 Fiber 200 Fiber
H-SP head H-SP head 7.874 head 7.874 head
H-SP H-SP
Up Up
0 0 0 0
40 20 0 20 40 40 20 0 20 40 150 100 50 0 50 100 150 150 100 50 0 50 100 150
1.575 0.787 0.787 1.575 1.575 0.787 0.787 1.575 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906
FDA224 FDA218
FDA224 FDA218
FX-500 SERIES Ver.2
102

SENSORS
Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No. LASER
SENSORS
FD-42G Reflective type FD-42GW Reflective type FD-60 Reflective type PHOTO-
ELECTRIC
SENSORS
Horizontal direction Vertical direction MICRO
PHOTO-
800 800 2,000 2,000 ELECTRIC
31.496 31.496 78.740 78.740 SENSORS
HYPR HYPR HYPR HYPR
AREA
SENSORS

600 Setting distance L (mm in) 600 1,500 1,500

23.622 23.622 59.055 59.055 SAFETY LIGHT

CURTAINS /
SAFETY
400 STD 400 STD 1,000 STD White 1,000 STD White COMPONENTS
White White non-glossy paper
15.748 non-glossy paper 15.748 non-glossy paper 39.370 non-glossy paper 39.370 PRESSURE /
ℓ ℓ ℓ ℓ FLOW
H-SP H-SP SENSORS
L L L L
200 200 500 500
7.874 Fiber 7.874 Fiber 19.685 Fiber 19.685 Fiber INDUCTIVE
head head head head PROXIMITY
H-SP H-SP SENSORS
Up
Left Right Left Right Left Right Down
0 0 0 0 PARTICULAR
200 100 0 100 200 100 50 0 50 100 400 200 0 200 400 400 200 0 200 400 USE
7.874 3.937 3.937 7.874 3.937 1.969 1.969 3.937 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 SENSORS
Left Center Right Left Center Right Left Center Right Down Center Up
OPTIONS
FD-61 FDA203 Reflective type FD-61G Reflective type SIMPLE

WIRE-SAVING
FDA235 FDA260 FDA260
UNITS
WIRE-SAVING
1,500 1,500 1,200 SYSTEMS
59.055 HYPR 59.055 HYPR 47.244 HYPR
MEASURE-
1,000 MENT
39.370 SENSORS

1,000 1,000 800 STATIC

39.370 39.370 31.496 CONTROL
White White White DEVICES
STD non-glossy STD non-glossy 600 STD non-glossy
paper paper 23.622 paper
LASER
ℓ ℓ ℓ MARKERS
500 500 400
19.685 L 19.685 L 15.748 H-SP L
Fiber Fiber Fiber
H-SP head H-SP head 200 head PLC
Up 7.874
Left Right 0 Down Left Right
0 0 HUMAN
600 400 200 0 200 400 600 600 400 200 0 200 400 600 600 400 200 0 200 400 600 MACHINE
23.622 15.748 7.874 7.874 15.748 23.622 23.622 15.748 7.874 7.874 15.748 23.622 23.622 15.748 7.874 7.874 15.748 23.622 INTERFACES
Left Center Right Down Center Up Left Center Right ENERGY
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) MANAGEMENT
SOLUTIONS
FD-61S Reflective type FD-61W Reflective type FA

FDA259 FDA200 COMPONENTS
Horizontal direction FDA259

Vertical direction Horizontal direction Vertical direction MACHINE
VISION
1,500 1,500 1,000 1,000 SYSTEMS
UV
CURING
800 800 SYSTEMS
31.496 31.496
1,000 1,000
39.370 39.370 600 STD 600
White 23.622 23.622
STD White STD non-glossy White STD White
non-glossy paper paper non-glossy paper non-glossy paper
ℓ ℓ 400 ℓ 400 ℓ
500 500 15.748 15.748
L L L Selection
19.685 19.685 L Guide
Fiber Fiber 200 Fiber 200 Fiber
head head 7.874 head 7.874 head Fibers
H-SP H-SP H-SP H-SP
Up Up
Left Right Down Left Right Down Fiber
0 0 0 0 Amplifiers
400 200 0 200 400 400 200 0 200 400 150 100 50 0 50 100 150 150 100 50 0 50 100 150
15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 Other
Down Center Up Down Center Up Products
Left Center Right Left Center Right
FX-500
FD-62 Reflective type FD-64X Reflective type FX-550
FDA222 FDA216
FDA222
Horizontal direction Vertical direction FDA216
Horizontal direction Vertical direction FX-100
2,000 2,000 800 800 FX-410

1,500 1,500 600 600


59.055 59.055 23.622 23.622
White
1,000 STD White 1,000 STD White 400 STD White 400 STD non-glossy
39.370 non-glossy paper 39.370 non-glossy paper 15.748 non-glossy paper 15.748 paper
ℓ ℓ ℓ ℓ
L L L L
500 500 200 200
head head head head
H-SP H-SP H-SP H-SP
Up Up
0 0 0 0
600 400 200 0 200 400 600 600 400 200 0 200 400 600 300 200 100 0 100 200 300 300 200 100 0 100 200 300
23.622 15.748 7.874 7.874 15.748 23.622 23.622 15.748 7.874 7.874 15.748 23.622 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811
FDA248
FDA220 FDA248
FDA220
FX-500 SERIES Ver.2
FIBER
SENSORS
LASER Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No.
SENSORS
PHOTO- FD-A16 Reflective type FD-AL11 Reflective type

ELECTRIC
SENSORS
PHOTO-
ELECTRIC 250 250 800 800
SENSORS 9.843 9.843 31.496 31.496
HYPR HYPR
STD STD
AREA
SENSORS 200 200
7.874 7.874 600 600


SAFETY LIGHT 23.622 23.622
CURTAINS / 150 150
SAFETY White
COMPONENTS 5.906 5.906 non-glossy White
White 400 STD 400 STD
non-glossy paper paper non-glossy
PRESSURE / 15.748 White 15.748 paper
FLOW 100 H-SP 200mm 100 H-SP 200mm non-glossy
SENSORS 3.937 7.874in 3.937 7.874in paper ℓ
ℓ ℓ ℓ
200 H-SP 200 H-SP
INDUCTIVE 50 L 50 L 7.874 L 7.874 3.6mm
PROXIMITY 1.969 1.969 0.142in L
SENSORS Fiber Fiber Fiber
head head head Fiber
head
PARTICULAR 0 0 0 0
USE 60 40 20 0 20 40 60 60 40 20 0 20 40 60 300 200 100 0 100 200 300 300 200 100 0 100 200 300
SENSORS 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
FD-E13 Reflective type
FDA225 FD-E23 Reflective type
FDA252 FD-EG30 Reflective type
FDA252
FDA225
WIRE-SAVING Horizontal direction Vertical direction
SYSTEMS
60 60 200 200
MEASURE- 2.362 HYPR 2.362 HYPR 7.874 HYPR 7.874 HYPR
MENT
SENSORS 50 50
1.969 1.969
150 150

STATIC
CONTROL 40 40 5.906 5.906
White White
DEVICES 1.575 non-glossy 1.575 non-glossy
paper paper White
White non-glossy
LASER 30 STD 200mm 30 STD 200mm 100 STD non-glossy 100 STD
paper
MARKERS 1.181 7.874in 1.181 7.874in 3.937 paper 3.937
200mm 200mm
ℓ ℓ 7.874in
20 H-SP 20 H-SP H-SP 7.874in H-SP
0.787 L 0.787 L ℓ ℓ
PLC Fiber Fiber
50 50
10 head 10 head 1.969 L 1.969 L
0.394 0.394 Up Fiber Fiber
HUMAN head head
MACHINE Left Right Down
0 0 0 0
INTERFACES
15 10 5 0 5 10 15 15 10 5 0 5 10 15 40 20 0 20 40 60 40 20 0 20 40 60
ENERGY 0.591 0.394 0.197 0.197 0.394 0.591 0.591 0.394 0.197 0.197 0.394 0.591 1.575 0.787 0.787 1.575 2.362 1.575 0.787 0.787 1.575 2.362
Left Center Right Down Center Up Left Center Right
MANAGEMENT Left Center Right
SOLUTIONS Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
Operating point ℓ (mm in)
FA
COMPONENTS
FD-EG30S FDA242
Reflective type FD-EG31 FDA242
Reflective type FD-H13-FM2 Reflective type FDA246
MACHINE
VISION FDA243
SYSTEMS 200 100
7.874 HYPR 3.937 HYPR White non-glossy paper
UV
CURING ℓ
SYSTEMS 80 1,000
L
150 3.150 39.370 Fiber
5.906 head
60
White 2.362 White HYPR
100 STD non-glossy STD non-glossy
3.937 paper paper STD
200mm 40 200mm 500
Selection 7.874in 1.575 7.874in 19.685
H-SP H-SP ℓ
Guide ℓ H-SP
50
Fibers 1.969 L 20 L
Fiber
0.787 Fiber
Fiber head head
Amplifiers 0 0 0
Other 60 40 20 0 20 40 60 30 20 10 0 10 20 30 400 200 0 200 400
Products 2.362 1.575 0.787 0.787 1.575 2.362 1.181 0.787 0.394 0.394 0.787 1.181 15.748 7.874 7.874 15.748
FX-500
FX-550 FD-H18-L31 Reflective type FD-H20-21 Reflective type FD-H20-M1 Reflective type
FX-100
FX-410 80 80
3.150 Transparent glass 3.150 Transparent glass White non-glossy paper
100mm, (t=0.7mm) 100mm,(t=0.7mm)
3.937in, (t=0.028in) ℓ HYPR
HYPR 3.937in,(t=0.028in)
1,000 L 1,000
60 60 39.370 39.370
2.362 ℓ 2.362 ℓ Fiber
4mm L HYPR Emitter L
0.157in HYPR head
40 40 STD
1.575 STD 1.575 STD
500 STD 500 White
19.685 19.685 non-glossy paper
20 20 H-SP ℓ
0.787 H-SP 0.787 H-SP H-SP
L
Fiber
head
0 0 0 0
4 2 0 2 4 4 2 0 2 4 200 100 0 100 200 200 100 0 100 200
0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157 7.874 3.937 3.937 7.874 7.874 3.937 3.937 7.874
FX-500 SERIES Ver.2
104

SENSORS
Reflective type Sensing field Sensing characteristics are listed in the alphabetic order of the Model No. (Models with same sensing characteristics are grouped together.) LASER
SENSORS
FD-H25-L43 Reflective type FD-H25-L45 Reflective type PHOTO-

ELECTRIC
SENSORS
PHOTO-
40 40 ELECTRIC
1.575 Transparent glass 100 mm, (t=0.7 mm) 1.575 Transparent glass Transparent glass Transparent glass SENSORS
HYPR 3.937 in, (t=0.028 in) 100 mm, (t=0.7 mm) HYPR 100 mm, (t=0.7 mm) HYPR 100 mm, (t=0.7 mm)
HYPR 3.937 in, (t=0.028 in) 3.937 in, (t=0.028 in) 3.937 in, (t=0.028 in) AREA
ℓ 40 40 SENSORS

30 4.5mm L 30 1.575 1.575

0.177in Emitter ℓ ℓ STD Emitter ℓ
1.181 1.181 L 4.5mm L L SAFETY LIGHT
STD 0.177in CURTAINS /
STD SAFETY
20 20 STD COMPONENTS
0.787 0.787 H-SP H-SP PRESSURE /
20 20 FLOW
0.787 H-SP 0.787 SENSORS
H-SP
10 10
0.394 0.394 INDUCTIVE
PROXIMITY
SENSORS
0 0 0 0 PARTICULAR
4 2 0 2 4 4 2 0 2 4 4 2 0 2 4 4 2 0 2 4 USE
0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157 SENSORS
OPTIONS
SIMPLE
FD-H30-L32 Reflective type FD-H30-L32V-S Reflective type WIRE-SAVING
UNITS
Horizontal direction Vertical direction Horizontal direction Vertical direction WIRE-SAVING

SYSTEMS
80 80
3.150 3.150 Transparent glass Transparent glass MEASURE-
Transparent glass Transparent glass
100 mm, (t=0.7 mm) 100 mm, (t=0.7 mm) MENT
100 mm HYPR 100 mm, (t=0.7 mm)
3.937 in, (t=0.028 in) 3.937 in, (t=0.028 in) SENSORS
3.937 in 3.937 in, (t=0.028 in)
20 20
60 (t=0.7 mm) 60

0.787 0.787 HYPR STATIC

2.362 (t=0.028 in) 2.362 Emitter ℓ ℓ
ℓ CONTROL
HYPR L L Emitter L
HYPR DEVICES
ℓ
L
40 40 STD STD STD LASER
1.575 STD 1.575 MARKERS
10 10
0.394 H-SP 0.394
H-SP
20 H-SP 20 H-SP PLC
0.787 0.787
HUMAN
0 0 0 0 MACHINE
INTERFACES
2 1 0 1 2 2 1 0 1 2 2 1 0 1 2 2 1 0 1 2
0.079 0.039 0.039 0.079 0.079 0.039 0.039 0.079 0.079 0.039 0.039 0.079 0.079 0.039 0.039 0.079 ENERGY
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) SOLUTIONS
FA
COMPONENTS
FD-H35-20S Reflective type FD-H35-M2 Reflective FD-L10 Reflective type
FD-H35-M2S6 type MACHINE
VISION
Horizontal direction Vertical direction SYSTEMS
800 8 8 UV
White non-glossy paper 31.496 White non-glossy paper 0.315 0.315 Transparent glass CURING
HYPR HYPR 100 mm, (t=0.7 mm) SYSTEMS
ℓ ℓ
3.937 in, (t=0.028 in)
1,000 L L STD STD ℓ

39.370 600 6 6 2 mm
Fiber head 23.622 Fiber head 0.236 0.236 0.079 in L
H-SP H-SP
HYPR HYPR
400 4 Transparent 4
15.748 STD 0.157 glass 0.157 Selection
500 100 mm Guide
19.685 STD 3.937 in
(t=0.7 mm) Fibers
H-SP 200 2 (t=0.028 in) 2
7.874 0.079 ℓ 0.079 Fiber
H-SP
Amplifiers
L
0 Other
0 0 0 Products
400 200 0 200 400 200 100 0 100 200 3 2 1 0 1 2 3 3 2 1 0 1 2 3
15.748 7.874 7.874 15.748 7.874 3.937 3.937 7.874 0.118 0.079 0.039 0.039 0.079 0.118 0.118 0.079 0.039 0.039 0.079 0.118
Left Center Right Left Center Right Left Center Right Down Center Up
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) FX-500
FX-550
FD-L11 Reflective type FD-L12W FDA232
Reflective type FX-100
FDA232
Horizontal direction Vertical direction Horizontal direction Vertical direction FX-410
15 15 15 15
0.591 Transparent glass 0.591 Transparent glass 0.591 Transparent glass 0.591 Transparent glass
HYPR 100 mm HYPR 100 mm HYPR 100 mm HYPR 100 mm
3.937 in 3.937 in 3.937 in 3.937 in
STD (t=0.7 mm) STD (t=0.7 mm) (t=0.7 mm) (t=0.7 mm)

(t=0.028 in) (t=0.028 in) (t=0.028 in) (t=0.028 in)

10 ℓ 10 ℓ 10 ℓ 10 ℓ
0.394 H-SP 0.394 H-SP 2 mm 0.394 STD 0.394 STD 1.5 mm
L 0.079 in L L 0.059 in L
5 5 5 H-SP 5 H-SP
0.197 0.197 0.197 0.197
0 0 0 0
4 2 0 2 4 4 2 0 2 4 1 0.5 0 0.5 1 1 0.5 0 0.5 1
0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157 0.039 0.020 0.020 0.039 0.039 0.020 0.020 0.039
FDA231 FDA231
FX-500 SERIES Ver.2
FIBER
SENSORS
SENSORS
PHOTO- FD-L20H Reflective type FD-L21 Reflective type

ELECTRIC
SENSORS
PHOTO-
ELECTRIC 50 50 20 20
SENSORS 1.969 1.969 0.787 Transparent glass 0.787
HYPR HYPR HYPR 200 mm, (t=2.0 mm) HYPR
AREA 7.874 in, (t=0.079 in)
SENSORS 40 40 ℓ

STD STD

15 15
1.575 1.575
SAFETY LIGHT STD 0.591 L 0.591
STD
CURTAINS / 30 Transparent
SAFETY 30 H-SP Emitter H-SP glass
COMPONENTS 1.181 1.181
White 10 10 200 mm
PRESSURE / non-glossy paper White non-glossy paper 0.394 0.394 7.874 in
FLOW 20 200 mm 20 200 mm (t=2.0 mm)
SENSORS 0.787 7.874 in
0.787 7.874 in (t=0.079 in)
H-SP ℓ ℓ
H-SP 5 5 ℓ
INDUCTIVE 10 L 0.197 0.197 3 mm
PROXIMITY 0.394
10 L 0.118 in L
SENSORS Fiber 0.394 Fiber Fiber
head head head
PARTICULAR 0 0 0
USE 15 10 5 0 5 10 15 0 6 4 2 0 2 4 6 3 2 1 0 1 2 3
SENSORS 0.591 0.394 0.197 0.197 0.394 0.591 15 10 5 0 5 10 15 0.236 0.157 0.079 0.079 0.157 0.236 0.118 0.079 0.039 0.039 0.079 0.118
0.591 0.394 0.197 0.197 0.394 0.591
SENSOR Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
OPTIONS Operating point ℓ (mm in)
SIMPLE
WIRE-SAVING
UNITS FD-L21W Reflective type FD-L22A Reflective type
FDA227
FDA226 FDA226
FDA227
WIRE-SAVING
SYSTEMS
20 20 35 35
MEASURE- 0.787 Transparent glass 0.787 1.378 1.378
MENT HYPR 200 mm, (t=2.0 mm)
HYPR HYPR HYPR
SENSORS 7.874 in, (t=0.079 in) 30 30
STD STD 1.181 STD 1.181 STD

ℓ
STATIC 15 15
0.591 0.591 25 25
CONTROL L 0.984 0.984
DEVICES H-SP H-SP H-SP H-SP
20 20
Transparent 0.787 0.787 Transparent
LASER 10 10 glass glass
MARKERS 0.394 0.394 200 mm 15 15 100 mm
Transparent glass
7.874 in 0.591 100 mm, (t=0.7 mm) 0.591 3.937 in
(t=2.0 mm) (t=0.7 mm)
10 3.937 in, (t=0.028 in) 10 (t=0.028 in)
PLC 5 5 (t=0.079 in) 0.394 0.394
0.197 0.197 ℓ
ℓ ℓ
3 mm 5 L 5 2.5 mm
HUMAN 0.118 in L 0.197 0.197 0.098 in L
MACHINE 0
INTERFACES 0
4 2 0 2 4 2 1 0 1 2 04 2 0 2 4 04 2 0 2 4
ENERGY 0.157 0.079 0.079 0.157 0.079 0.039 0.039 0.079 0.157 0.079 0.079 0.157 0.157 0.079 0.079 0.157
MANAGEMENT Left Center Right Down Center Up Left Center Right Down Center Up
FA
COMPONENTS
FD-L23 FDA228 Reflective type
FDA228 FD-L30A Reflective type
MACHINE FDA201 FDA201
VISION
SYSTEMS Horizontal direction Vertical direction Horizontal direction Vertical direction
UV
CURING 35 Transparent
35 50 50
SYSTEMS 1.378 HYPR glass 1.378 HYPR 1.969 HYPR 1.969 HYPR
30 100 mm 30
1.181 STD 3.937 in 1.181 STD 40 STD 40 STD

(t=0.7 mm) 1.575 1.575

25 (t=0.028 in) 25
0.984 0.984
H-SP ℓ H-SP 30 H-SP 30 H-SP
20 20 1.181 1.181
0.787 L 0.787 Transparent Transparent
glass glass Transparent glass
Selection
Guide 15 15 100 mm 20 100 mm 20 100 mm
0.591 0.591 3.937 in 0.787 3.937 in 0.787 3.937 in
Fibers (t=0.7 mm) (t=0.7 mm) (t=0.7 mm)
10 10 (t=0.028 in)
0.394 0.394 (t=0.028 in) (t=0.028 in)
Fiber ℓ 10 ℓ 10
5 5 2.5 mm 0.394 0.394 ℓ
Amplifiers 2.5 mm
0.197 0.197 0.098 in L L L
Other 0.098 in
Products 0 0 0
6 4 2 0 2 4 6 06 4 2 0 2 4 6 6 4 2 0 2 4 6 6 4 2 0 2 4 6
0.236 0.157 0.079 0.079 0.157 0.236 0.236 0.157 0.079 0.079 0.157 0.236 0.236 0.157 0.079 0.079 0.157 0.236 0.236 0.157 0.079 0.079 0.157 0.236
FX-500 Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-550
FX-100 FD-L31A Reflective type FD-L32H FDA202

Reflective type
FDA205
FDA205
FX-410
Horizontal direction Vertical direction FDA202
40 40 120 120
1.575 Transparent glass 1.575 4.724 Transparent glass 4.724
HYPR 100 mm, (t=0.7 mm) HYPR HYPR 100 mm HYPR
3.937 in, (t=0.028 in) 100 3.937 in 100 Transparent
STD ℓ STD 3.937 (t=0.7 mm) 3.937 glass

30 30 (t=0.028 in)
1.181 1.181 100 mm
L 80 STD R edge (R0.35 R0.014) 80 STD 3.937 in
H-SP H-SP 3.150 3.150 (t=0.7 mm)
Transparent (t=0.028 in)
20 20 glass 60 ℓ 60 R edge
0.787 0.787 2.362 L 2.362 (R0.35
100 mm
3.937 in R0.014)
(t=0.7 mm) 40 40
10 10 (t=0.028 in) 1.575 1.575
0.394 0.394 ℓ 20 20
ℓ L
3 mm
0.118 in L 0.787 0.787
0 0 0 0
6 4 2 0 2 4 6 6 4 2 0 2 4 6 10 5 0 5 10 10 5 0 5 10
0.236 0.157 0.079 0.079 0.157 0.236 0.236 0.157 0.079 0.079 0.157 0.236 0.394 0.197 0.197 0.394 0.394 0.197 0.197 0.394
FDA229 FDA230
FX-500 SERIES Ver.2
106

SENSORS
SENSORS
FD-R31G Reflective type FD-R32EG Reflective type FD-R33EG Reflective type FD-R34EG Reflective type PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
600 200 100 150 ELECTRIC
23.622 7.874 3.937 HYPR 5.906 SENSORS
500 AREA
19.685 160 80 120 HYPR SENSORS

6.299 HYPR 3.150 4.724
400 HYPR SAFETY LIGHT
15.748 120 60 90 CURTAINS /
SAFETY
4.724 2.362 3.543 COMPONENTS
300
11.811 White non-glossy paper White non-glossy paper White non-glossy paper White non-glossy paper PRESSURE /
STD ℓ
80 40 ℓ
60 ℓ FLOW
3.150 ℓ 1.575 2.362
200 STD STD SENSORS
7.874 L
STD
L L L
Fiber 40 Fiber 20 Fiber 30 Fiber INDUCTIVE
100 head 1.575 head 0.787 head 1.181 head PROXIMITY
3.937 SENSORS
H-SP Left Right H-SP Left Right H-SP Left Right H-SP Left Right
0 0 0 0 PARTICULAR
150 100 50 0 50 100 150 40 30 20 10 0 10 20 30 40 15 10 5 0 5 10 15 30 20 10 0 10 20 30 USE
5.906 3.937 1.969 1.969 3.937 5.906 1.575 1.181 0.787 0.394 0.394 0.787 1.181 1.575 0.591 0.394 0.197 0.197 0.394 0.591 1.181 0.787 0.394 0.394 0.787 1.181 SENSORS
Left Center Right Left Center Right Left Center Right Left Center Right
OPTIONS
SIMPLE
FD-R41 Reflective type FD-R60 Reflective type WIRE-SAVING
UNITS

SYSTEMS
800 800 1,200 1,200
31.496 31.496 47.244 HYPR 47.244 HYPR MEASURE-
MENT
1,000 1,000 SENSORS
39.370 39.370

600 HYPR 600 HYPR STATIC

23.622 23.622 800 800 CONTROL
31.496 31.496 DEVICES
White White
400 400 600 STD non-glossy 600 STD non-glossy LASER
15.748 White non-glossy paper 15.748 White non-glossy paper 23.622 paper 23.622 paper MARKERS
ℓ ℓ ℓ ℓ
STD STD 400 400
L L 15.748 L 15.748 L
200 200 PLC
7.874 Fiber 7.874 Fiber Fiber Fiber
head head 200 H-SP head 200 H-SP head
Up 7.874 7.874 Up HUMAN
H-SP Left Right H-SP Down MACHINE
0 Left Right Down
0 0 0 INTERFACES
150 100 50 0 50 100 150 150 100 50 0 50 100 150 300 200 100 0 100 200 300 300 200 100 0 100 200 300
5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 11.811 7.874 3.937 3.937 7.874 11.811 11.811 7.874 3.937 3.937 7.874 11.811 ENERGY
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) SOLUTIONS
FA
COMPONENTS
FD-R61Y Reflective type FD-S21 FDA240 Reflective type
FDA240
MACHINE
VISION
Horizontal direction Vertical direction Horizontal direction Vertical direction SYSTEMS
UV
1,200 1,200 200 200 CURING
47.244 47.244 7.874 HYPR 7.874 HYPR SYSTEMS
1,000 1,000
39.370 39.370
HYPR HYPR 150 150

800 800 5.906 5.906 White
31.496 31.496 White non-glossy
non-glossy paper
STD paper STD
600 White 600 White 100 200 mm 100 200 mm
23.622 non-glossy paper 23.622 non-glossy paper 3.937 3.937 7.874 in Selection
7.874 in Guide
ℓ ℓ ℓ ℓ
400 STD 400 STD
L L
H-SP H-SP L Fibers
15.748 15.748 50 L 50
Fiber Fiber 1.969 1.969 Fiber
200 head 200 head head Fiber
Fiber head Amplifiers
7.874 7.874 Up Up
H-SP Left Right H-SP Left Right Other
Down 0 0 Down
0 0 Products
200 150 100 50 0 50 100 150 200 200 150 100 50 0 50 100 150 200 60 40 20 0 20 40 60 60 40 20 0 20 40 60
7.874 5.906 3.937 1.969 1.969 3.937 5.906 7.874 7.874 5.906 3.937 1.969 1.969 3.937 5.906 7.874 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362
Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) FX-500
FX-550
FD-S30 Reflective type FD-S31 FDA245 Reflective type FX-100
FDA245
FX-410
800 800 600 600
500 500
19.685 19.685

600 600
23.622 23.622 400 400
White 15.748 15.748
White non-glossy White
STD non-glossy STD paper STD non-glossy STD
400 paper
400 300 paper 300
15.748 15.748 ℓ 11.811 11.811 White non-glossy paper
ℓ ℓ
L ℓ
L
200 L 200
Fiber 7.874 7.874 L
200 200 head Fiber
7.874 Fiber 7.874 Fiber
head 100 H-SP head 100 H-SP head
H-SP H-SP Up
3.937 3.937 Up
Down
Left Right Left Right Down
0 0 0
0
150 100 50 0 50 100 150 150 100 50 0 50 100 150 150 100 50 0 50 100 150 150 100 50 0 50 100 150
5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906

FX-500 SERIES Ver.2
FIBER
SENSORS
SENSORS
PHOTO- FD-S32 Reflective type FD-S32W Reflective type

ELECTRIC
SENSORS
PHOTO-
ELECTRIC 1,500 1,500 1,000 1,000
SENSORS 59.055 59.055 39.370 39.370
HYPR HYPR HYPR HYPR
AREA
SENSORS 800 800


31.496 31.496
SAFETY LIGHT 1,000 1,000
CURTAINS / 39.370 39.370 600 600
SAFETY
STD White STD White STD White
STD White
PRESSURE / non-glossy paper non-glossy paper non-glossy paper non-glossy paper
FLOW ℓ ℓ 400 ℓ
400 ℓ
SENSORS 500 500 15.748 15.748
19.685 L 19.685 L L L
INDUCTIVE 200 200
PROXIMITY Fiber head Fiber head 7.874 7.874 Fiber head
SENSORS H-SP H-SP H-SP Fiber head H-SP
Up Up
PARTICULAR 0 0 0 0
USE 400 200 0 200 400 400 200 0 200 400 150 100 50 0 50 100 150 150 100 50 0 50 100 150
SENSORS 15.748 7.874 7.874 15.748 15.748 7.874 7.874 15.748 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906
OPTIONS
SIMPLE
WIRE-SAVING FD-S33GW Reflective type FD-S60Y Reflective type
FDA219
UNITS FDA221
FDA221 FDA219
WIRE-SAVING
SYSTEMS
800 800 800
MEASURE- 31.496 White non-glossy paper 31.496 White non-glossy paper 31.496
MENT HYPR ℓ ℓ
SENSORS
L L HYPR
STATIC 600 600 600

23.622 23.622 Fiber 23.622
CONTROL Fiber head HYPR head
DEVICES
Left Right Left Right
LASER 400 STD 400 400 STD White
MARKERS 15.748 15.748 STD 15.748 non-glossy paper
ℓ
H-SP
L
PLC 200 200 200
7.874 7.874 7.874 Fiber
H-SP H-SP head
HUMAN Up
MACHINE Down
INTERFACES 0 0 0
100 50 0 50 100 60 40 20 0 20 40 60 60 40 20 0 20 40 60
ENERGY 3.937 1.969 1.969 3.937 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362
MANAGEMENT Left Center Right Left Center Right Down Center Up
SOLUTIONS Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FA
COMPONENTS
FD-V30 FDA236
Reflective type FD-V30W Reflective type
MACHINE
VISION
SYSTEMS Horizontal direction Vertical direction Horizontal direction Vertical direction
UV
CURING 250 250 100 100
SYSTEMS 9.843 HYPR 9.843 HYPR 3.937 HYPR 3.937 HYPR
200 200 80 80
7.874 7.874 3.150 3.150
150 150 60 60 White

5.906 5.906 2.362 2.362 non-glossy
STD White STD White STD STD
Selection non-glossy non-glossy paper paper
Guide 100 paper 100 200 mm 40 White non-glossy paper 40 200 mm
3.937 200 mm 3.937 7.874 in 1.575 200 mm 1.575 7.874 in
Fibers H-SP 7.874 in H-SP H-SP 7.874 in H-SP ℓ
ℓ ℓ
ℓ L
Fiber 50 50 L 20 20
1.969 L 1.969 0.787 L 0.787
Amplifiers
Fiber Fiber Fiber head
Other head Fiber head head
Products 0 0 0 0
80 60 40 20 0 20 40 60 80 80 60 40 20 0 20 40 60 80 20 10 0 10 20 20 10 0 10 20
3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 0.787 0.394 0.394 0.787 0.787 0.394 0.394 0.787
FX-500 Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in) Operating point ℓ (mm in)
FX-550
FDA238
FX-100 FD-V50 Reflective type
FDA237 FD-Z20HBW
FDA238 Reflective type
FDA237
FX-410
400 ℓ 400 400 400
15.748 White 15.748 15.748 White non-glossy paper 15.748 White non-glossy paper
HYPR HYPR HYPR ℓ
L non-glossy paper ℓ
3.5mm
Fiber head L 0.138in L

300 300 300 300

11.811 11.811 11.811 Fiber 11.811 Fiber

HYPR head head
200 STD 200 STD 200 STD 200 STD

7.874 7.874 White 7.874 7.874
H-SP H-SP non-glossy
paper
H-SP H-SP
100 100 ℓ 100 100
3.937 3.937 L 3.937 3.937
Fiber head
0 0 0 0
100 50 0 50 100 100 50 0 50 100 60 40 20 0 20 40 60 60 40 20 0 20 40 60
3.937 1.969 1.969 3.937 3.937 1.969 1.969 3.937 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362

FX-500 SERIES Ver.2
108

SENSORS
SENSORS
FD-Z20W Reflective type FD-Z40HBW Reflective type PHOTO-

ELECTRIC
SENSORS
PHOTO-
300 300 800 800 ELECTRIC
11.811 11.811 31.496 31.496 SENSORS
HYPR HYPR HYPR HYPR
250 250 AREA
9.843 9.843 SENSORS

Setting distance L (mm in) 600 600
200 200 23.622 23.622 SAFETY LIGHT
7.874 7.874 CURTAINS /
SAFETY
150 STD White 150 STD 400 STD 400 STD COMPONENTS
5.906 non-glossy 5.906 White 15.748 White 15.748 White PRESSURE /
paper non-glossy paper non-glossy non-glossy FLOW
100 100 paper paper SENSORS
3.937 ℓ 3.937 ℓ ℓ ℓ
1.2 mm 200 H-SP 200 H-SP
3.5 mm L 0.047 in L 7.874 7.874 4 mm INDUCTIVE
50 0.138 in 50 L 0.158 in L PROXIMITY
1.969 H-SP 1.969 H-SP Fiber Fiber SENSORS
Fiber Fiber
head head head head
0 0 0 0 PARTICULAR
30 20 10 0 10 20 30 30 20 10 0 10 20 30 150 100 50 0 50 100 150 150 100 50 0 50 100 150 USE
1.181 0.787 0.394 0.394 0.787 1.181 1.181 0.787 0.394 0.394 0.787 1.181 5.906 3.937 1.969 1.969 3.937 5.906 5.906 3.937 1.969 1.969 3.937 5.906 SENSORS
OPTIONS
FDA250 SIMPLE
WIRE-SAVING
FD-Z40W Reflective type FD-Z50HWFDA250 Reflective type UNITS
FDA436 FDA346
SYSTEMS
800 800 3,000 3,000
31.496 White non-glossy paper 31.496 118.110 White non-glossy paper 118.110 HYPR ℓ White non-glossy MEASURE-
ℓ HYPR HYPR L paper MENT
ℓ
4.0 mm L 2,500 2,500 SENSORS
0.158 in 98.425 L 98.425 Fiber head
600 600

STATIC
23.622 Fiber head 23.622 2,000 Fiber 2,000 CONTROL
head DEVICES
78.740 78.740
HYPR
400 400 STD White 1,500 STD 1,500 STD LASER
15.748 15.748 non-glossy 59.055 59.055 MARKERS
STD paper
1,000 1,000
ℓ 39.370 39.370
200 200 H-SP H-SP PLC
7.874 7.874 1.2 mm L
0.047 in 500 500
H-SP H-SP
Fiber head
19.685 19.685 HUMAN
MACHINE
0 0 0 0 INTERFACES
80 60 40 20 0 20 40 60 80 80 60 40 20 0 20 40 60 80 60 40 20 0 20 40 60 60 40 20 0 20 40 60
3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 3.150 2.362 1.575 0.787 0.787 1.575 2.362 3.150 2.362 1.575 0.787 0.787 1.575 2.362 2.362 1.575 0.787 0.787 1.575 2.362 ENERGY
Operating point ℓ (mm in) SOLUTIONS
FA
Refer to p.1552 ~ for general precautions. COMPONENTS
PRECAUTIONS
FDA347
FOR PROPER USE Refer to theFDA241
FDA241
“PRO mode operation manual” on our website for details. MACHINE
FDA347 VISION
SYSTEMS
• Make sure to use the quick-connection cable (optional)
• Never use this product as a sensing device for the connection of the controller.
UV
CURING
for personnel protection. Extension up to total 100 m 328.084 ft is possible with
SYSTEMS
• In case of using sensing devices for 0.3 mm2 or more, cable.

personnel protection, use products which However, in order to reduce noise, make the wiring as
meet laws and standards, such as OSHA, short as possible.
ANSI or IEC etc., for personnel protection • Make sure that stress by forcible bending or pulling is not Selection
applicable in each region or country. applied to the sensor cable joint and fiber cable.
Guide
Fibers
Wiring Others Fiber

Amplifiers
• Make sure that the power supply is OFF while adding or • This product has been developed / produced for industrial Other
Products
removing the amplifiers. use only.
• Note that if a voltage exceeding the reted range is • The specification may not be satisfied in a strong
FX-500
applied, or if an AC power supply is directly connected, magnetic field.
FX-550
the product may get burnt or damaged. • The ultra long distance (U-LG, HYPR) mode is more
• Note that short-circuit of the load or wrong wiring may likely to be affected by extraneous noise since the FX-100
burn or damage the product. sensitivity of that is higher than the other modes. Make FX-410
• Do not run the wires together with high-voltage lines or sure to check the environment before use.
power lines, or put them in the same raceway. • Do not use during the initial transient time (H-SP, FAST,
This can cause malfunction due to induction. STD: 0.5 sec., LONG, U-LG, HYPR: 1 sec.) after the
• Verify that the supply voltage variation is within the rating. power supply is switched ON.
• If power is supplied from a commercial switching • These sensors are only for indoor use.
regulator, ensure that the frame ground (F.G.) terminal of • Avoid dust, dirt, and steam.
the power supply is connected to an actual ground. • Make sure that the product does not come in contact with
• In case noise generating equipment (switching regulator, oil, grease, organic solvents such as thinner, etc., strong
inverter motor, etc.) is used in the vicinity of this acid or alkaline.
product, connect the frame ground (F.G.) terminal of the • This product cannot be used in an environment
equipment to an actual ground. containing inflammable or explosive gases.
• Never disassemble or modify this product.
• This product adopts EEPROM. Settings cannot be done a
million times or more because of the EEPROM's lifetime.
FX-500 SERIES Ver.2
Refer to p.63~ for details of fiber dimensions.

FIBER
SENSORS
DIMENSIONS (Unit: mm in) The CAD data can be downloaded from our website.
LASER
SENSORS FX-501(P) FX-502(P) Amplifier FX-505-C2 FX-505P-C2 Amplifier
PHOTO- 62.5 2.461 9.95 9.95
ELECTRIC Output selection indicator Output selection indicator 62.5 2.461
SENSORS 8.2 0.392 8.2 2 0.079 0.392
(Yellow) (Note 1) 0.323 2 0.079 (Yellow) 0.323
Digital display (Green / Red) MODE key
MICRO
PHOTO-
ELECTRIC Output 1 operation indicator
SENSORS Output 1 operation indicator (Orange)
(Orange) (Note 2)
AREA Setting switch MODE key Output 2 operation indicator Digital display (Green / Red)
(Orange) Setting switch
SENSORS Output 2 operation indicator
(Orange) (Note 1)
SAFETY LIGHT
CURTAINS /
SAFETY
27.8 1.094 1.1 0.043
PRESSURE / Communication window 22.7 0.894 22.7 0.894 ø4 ø0.157
FLOW 10 7 0.276 10 Communication window 7 cable 2 m 6.562 ft
SENSORS 0.394 Beam- 0.394
Beam- 0.276
emitting emitting
INDUCTIVE part
PROXIMITY part
SENSORS
32 32 28
Beam-
PARTICULAR
Beam- 1.260 28 20.8 receiving
1.260 1.102 20.8
10.5
USE 1.102 10.5 7 0.276 0.819
SENSORS receiving 7 0.276 0.819 part 0.413 9.2
0.413 0.362
part 5.7 0.224
5.7 0.224
SENSOR 24 0.945 36.5 1.437
OPTIONS 24 0.945 36.5 1.437 3 3.95
3 3.95 0.118 0.156
0.118 75 2.953
0.156 75 2.953 2.8 0.110
SIMPLE (Note 3)
WIRE-SAVING Suitable for 35 mm 1.378 in width DIN rail
Suitable for 35 mm 1.378 in width DIN rail
UNITS
Notes: 1) FX-502(P) only
WIRE-SAVING 2) FX-501(P): Operation indicator
SYSTEMS
3) FX-501(P): 3-pin, FX-502(P): 4-pin
MEASURE-
MENT
SENSORS
STATIC
CN-73-C□ CN-74-C□ Main cable (Optional) CN-71-C□ CN-72-C□ Sub cable (Optional)
CONTROL
DEVICES
• Length L • Length L
LASER 50 50
L L
MARKERS Model No. Length L 1.969 Model No. Length L 1.969
(Note 2) (Note 2)
PLC
CN-73/74-C1 1,000 39.370 CN-71/72-C1 1,000 39.370
CN-73/74-C2 2,000 78.740 ø3.3 ø0.130 cable CN-71/72-C2 2,000 78.740 ø3.3 ø0.130 cable
HUMAN
MACHINE
INTERFACES CN-73/74-C5 5,000 196.850 10 CN-71/72-C5 5,000 196.850 10
0.394 3 0.394
ENERGY
MANAGEMENT
(0.551
14
) ( )6
0.236 ( 14
) 0.118 6
( )
0.236
SOLUTIONS 2.54
0.100
(0.114
2.9
) 2.54
0.100
0.551
(0.114
2.9
)
FA
COMPONENTS
(0.472) 0.413
12 10.5
(0.472) 0.413
12 10.5
MACHINE (Note 1) (Note 1)
VISION
SYSTEMS 2.54
0.100 7 2.54 7
0.2 3 2.65 0.100 0.2 3
UV 2.65 0.008 0.276 0.276
10 0.118 0.104 0.008 0.118
CURING 0.104 7.2 10 7.2
SYSTEMS 0.394 0.283 0.394
13.6 13.6 0.283
0.535 0.535
Notes: 1) CN-74-C□ only Notes: 1) CN-72-C□ only
2) CN-73-C□: 3-core 2) CN-71-C□: 1-core
Selection
Guide MS-DIN-2 Amplifier mounting bracket (Optional) MS-DIN-E End plate (Optional)
Fibers
21.6 0.850 2.75
Fiber 5.2 3.2 0.108
Amplifiers 0.205 16 0.630 0.126
Other
Products 8.5 10
0.335 0.394 M3 (length 18 mm 0.709 in) pan head screws
3.2 5.2 3 60 3
0.126 0.205 5 0.118 2.362 0.118
FX-500 15 5.6 M3 square nut
0.197 0.591 0.220
35
FX-550 0.4 2 1.378
0.016 ø1.8 0.079 2
FX-100 24.7
ø0.071 0.079 0.972
FX-410 7.5
0.295 4.2 0.165 t1
1.6 32 4
t 0.039 1.260
0.063 0.157
2-ø3.2 ø0.126 holes 27 Suitable for 35 mm 1.378 in width DIN rail
1.063
Material: Polycarbonate
Material: Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
110
MEMO

fx-500 e Cata

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

fx-500 e Cata

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

fx-500 e Cata

Uploaded by

Copyright:

Available Formats

Digital Fiber Sensor

FX-500 Super quality fiber FX-500 series

Threshold Incident light

A quality that surpassed that of standard fibers! FIBER

– 55 to +80 °C 1.2 times R4 mm 1/6

Max. 25 μs response time HYPR mode incorporated MACHINE VISION

HYPR mode Selection

FIBER Flat display with wide viewing angle

LASER The large and high-contrast 7-segment display of high Pr

Selection Suitable for preventative maintenance FX-502(P) ‌

Built-in logic functions FIBER

Functions operable by external input

COMPONENTS FX-502 NPN open-collector transistor 2 outputs

SYSTEMS FX-505-C2 analog output

ORDER GUIDE FIBER

Type Model No. Description SIMPLE

Refer to "Fiber Selection p.5 ~" for details of each fiber.

ELECTRIC NPN output FX-501 FX-502 FX-505-C2

Fiber Protection IP40 (IEC)

Accessory FX-MB1 (Amplifier protection seal): 1 set

I/O CIRCUIT AND WIRING DIAGRAMS FIBER

FX-502 NPN output type FA

FX-502P PNP output type FX-550

Terminal No. Color code of quick-connection cable FX-100

SENSING CHARACTERISTICS (TYPICAL) FIBER

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

FT-A11 Thru-beam type FT-A11W Thru-beam type

Setting distance L (mm in)

3,000 STD 3,000 STD 3,000 STD 3,000 STD

118.110 118.110 118.110 118.110

FTA162 FTA162 FTA217 FTA217

PHOTO- FT-A32 Thru-beam type FT-A32W Thru-beam type

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

STATIC 78.740 78.740

Setting distance L (mm in)

3,000 1,500 L 1,500

Setting distance L (mm in)

78.740 HYPR 78.740 Fiber head 39.370

SENSING CHARACTERISTICS (TYPICAL) FIBER

FT-H35-M2 FT-HL80Y Thru-beam type FT-KS40 Thru-beam type PHOTO-

Setting distance L (mm in)

Setting distance L (mm in)

Setting distance L (mm in)

FT-KV40 FTA209 Thru-beam type

Horizontal direction Vertical direction Horizontal direction Vertical direction MACHINE

Setting distance L (mm in)

Setting distance L (mm in)

3,000 STD 3,000 STD 3,000 STD 3,000 STD

2,000 H-SP 2,000 H-SP 2,000 H-SP 2,000 H-SP

FT-L80Y Thru-beam type

Setting distance L (mm in)

Selection Suitable for preventative maintenance FX-502(P) ‌