Writing Technical Reports

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

Writing reports

This guide has been written to provide a general introduction to writing re-
ports. It outlines the typical structure of a report and provides a step by step
guide to producing reports that are clear and well structured.

What is a report?
A report is written for a clear purpose and to a particular audience. Specific informa-
tion and evidence are presented, analysed and applied to a particular problem or is-
sue. The information is presented in a clearly structured format making use of sec-
tions and headings so that the information is easy to locate and follow.

When you are asked to write a report you will usually be given a report brief which
provides you with instructions and guidelines. The report brief may outline the pur-
pose, audience and problem or issue that your report must address, together with
any specific requirements for format or structure. This guide offers a general intro-
duction to report writing; be sure also to take account of specific instructions pro-
vided by your department.

What makes a good report?


Two of the reasons why reports are used as forms of written assessment are: to
find out what you have learned from your reading, research or experience; to give
you experience of an important skill that is widely used in the work place.

An effective report presents and analyses facts and evidence that are relevant to
the specific problem or issue of the report brief. All sources used should be ac-
knowledged and referenced throughout, in accordance with the preferred method of
your department. The style of writing in a report is usually less discursive than in an
essay, with a more direct and economic use of language. A well written report will
demonstrate your ability to: understand the purpose of the report brief and adhere
to its specifications; gather, evaluate and analyse relevant information; structure
material in a logical and coherent order; present your report in a consistent manner
according to the instructions of the report brief; make appropriate conclusions that
are supported by the evidence and analysis of the report; make thoughtful and
practical recommendations where required.

The structure of a report


The main features of a report are described below to provide a general guide.
These should be used in conjunction with the instructions or guidelines provided by
your department.
Title Page
This should briefly but explicitly describe the purpose of the report (if this is not ob-
vious from the title of the work). Other details you may include could be your name,
the date and for whom the report is written.

Terms of reference
Under this heading you could include a brief explanation of who will read the report
(audience) why it was written (purpose) and how it was written (methods). It may be
in the form of a subtitle or a single paragraph.

Abstract
The summary should briefly describe the content of the report. It should cover the
aims of the report, what was found and what, if any, action is called for. Aim for
about half a page in length and avoid detail or discussion; just outline the main
points. Remember that the summary is the first thing that is read. It should provide
the reader with a clear, helpful overview of the content of the report.

Table of Contents
The contents page should list the different chapters and/or headings together with
the page numbers. Your contents page should be presented in such a way that the
reader can quickly scan the list of headings and locate a particular part of the re-
port. You may want to number chapter headings and subheadings in addition to
providing page references. Whatever numbering system you use, be sure that it is
clear and consistent throughout.

Introduction
The introduction sets the scene for the main body of the report. The aims and ob-
jectives of the report should be explained in detail. Any problems or limitations in
the scope of the report should be identified, and a description of research methods,
the parameters of the research and any necessary background history should be
included.

In some reports, particularly in science subjects, separate headings for methods


and results are used prior to the main body (discussion) of the report as de-
scribed below.

Methods
Information under this heading may include: a list of equipment used; explanations
of procedures followed; relevant information on materials used, including sources of
materials and details of any necessary preparation; reference to any problems en-
countered and subsequent changes in procedure.
Results
This section should include a summary of the results of the investigation or experi-
ment together with any necessary diagrams, graphs or tables of gathered data that
support your results. Present your results in a logical order without comment. Dis-
cussion of your results should take place in the main body (discussion) of the re-
port.

Discussion
The main body of the report is where you discuss your material. The facts and evi-
dence you have gathered should be analysed and discussed with specific reference
to the problem or issue. If your discussion section is lengthy you might divide it into
section headings. Your points should be grouped and arranged in an order that is
logical and easy to follow. Use headings and subheadings to create a clear struc-
ture for your material. Use bullet points to present a series of points in an easy-to-
follow list. As with the whole report, all sources used should be acknowledged and
correctly referenced.

Conclusion
In the conclusion you should show the overall significance of what has been cov-
ered. You may want to remind the reader of the most important points that have
been made in the report or highlight what you consider to be the most central is-
sues or findings. However, no new material should be introduced in the conclusion.

Appendices
Under this heading you should include all the supporting information you have used
that is not published. This might include tables, graphs, questionnaires, surveys or
transcripts. Refer to the appendices in the body of your report.

References
Your references should list, in alphabetical order by author, all published sources
referred to in your report. There are different styles of using references and bibli-
ographies. Refer to the your departmental handbook for guidelines.

Acknowledgements
Where appropriate you may wish to acknowledge the assistance of particular or-
ganisations or individuals who provided information, advice or help.

Writing the report: the essential stages


All reports need to be clear, concise and well structured. The key to writing an
effective report is to allocate time for planning and preparation. With careful
planning, the writing of a report will be made much easier. The essential stages
of successful report writing are described below. Consider how long each stage
is likely to take and divide the time before the deadline between the different
stages. Be sure to leave time for final proof reading and checking.

Stage One: Understanding the report brief


This first stage is the most important. You need to be confident that you under-
stand the purpose of your report as described in your report brief or instructions.
Consider who the report is for and why it is being written. Check that you under-
stand all the instructions or requirements, and ask your tutor if anything is un-
clear.

Stage Two: Gathering and selecting information


Once you are clear about the purpose of your report, you need to begin to
gather relevant information. Your information may come from a variety of
sources, but how much information you will need will depend on how much de-
tail is required in the report. You may want to begin by reading relevant literature
to widen your understanding of the topic or issue before you go on to look at
other forms of information such as questionnaires, surveys etc. As you read and
gather information you need to assess its relevance to your report and select ac-
cordingly. Keep referring to your report brief to help you decide what is relevant
information.

Stage Three: Organising your material


Once you have gathered information you need to decide what will be included
and in what sequence it should be presented. Begin by grouping together points
that are related. These may form sections or chapters. Remember to keep refer-
ring to the report brief and be prepared to cut any information that is not directly
relevant to the report. Choose an order for your material that is logical and easy
to follow.

Stage Four: Analysing your material


Before you begin to write your first draft of the report, take time to consider and
make notes on the points you will make using the facts and evidence you have
gathered. What conclusions can be drawn from the material? What are the limi-
tations or flaws in the evidence? Do certain pieces of evidence conflict with one
another? It is not enough to simply present the information you have gathered;
you must relate it to the problem or issue described in the report brief.

Stage Five: Writing the report


Having organised your material into appropriate sections and headings you can
begin to write the first draft of your report. You may find it easier to write the
summary and contents page at the end when you know exactly what will be in-
cluded. Aim for a writing style that is direct and precise. Avoid waffle and make
your points clearly and concisely. Chapters, sections and even individual para-
graphs should be written with a clear structure. The structure described below
can be adapted and applied to chapters, sections and even paragraphs.

􏰀 Introduce the main idea of the chapter/section/paragraph

􏰀 Explain and expand the idea, defining any key terms.

􏰀 Present relevant evidence to support your point(s).

􏰀 Comment on each piece of evidence showing how it relates to your


point(s).

􏰀 Conclude your chapter/section/paragraph by either showing its signifi-


cance to the report as a whole or
making a link to the next chapter/section/paragraph.
Stage Six: Reviewing and redrafting
Ideally, you should leave time to take a break before you review your first
draft. Be prepared to rearrange or rewrite sections in the light of your review.
Try to read the draft from the perspective of the reader. Is it easy to follow
with a clear structure that makes sense? Are the points concisely but clearly
explained and supported by relevant evidence? Writing on a word processor
makes it easier to rewrite and rearrange sections or paragraphs in your first
draft. If you write your first draft by hand, try writing each section on a sepa-
rate piece of paper to make redrafting easier.

Stage Seven: Presentation


Once you are satisfied with the content and structure of your redrafted report, you
can turn your attention to the presentation. Check that the wording of each
chapter/section/subheading is clear and accurate. Check that you have adhered to
the instructions in your report brief regarding format and presentation. Check for
consistency in numbering of chapters, sections and appendices. Make sure that all
your sources are acknowledged and correctly referenced. You will need to proof
read your report for errors of spelling or grammar. If time allows, proof read more
than once. Errors in presentation or expression create a poor impression and can
make the report difficult to read.

You might also like