MB Manual B550-Aorus-Pro Ac 1201 210325 e

B550 AORUS PRO AC
B550 AORUS PRO
User's Manual
Rev. 1201
12ME-B55APRW-1201R
B550 AORUS PRO AC B550 AORUS PRO
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product
are recyclable and reusable. GIGABYTE works with you to protect the environment.
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE without
prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form
or by any means without GIGABYTE's prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For quick set-up of the product, read the Quick Installation Guide included with the product.
For detailed product information, carefully read the User's Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before updating
motherboard BIOS, drivers, or when looking for technical information.
Example:
Table of Contents
B550 AORUS PRO (AC) Motherboard Layout.................................................................4
B550 AORUS PRO (AC) Motherboard Block Diagram.....................................................5
Chapter 1 Hardware Installation......................................................................................6

1-1 Installation Precautions..................................................................................... 6
1-2 Product Specifications....................................................................................... 7
1-3 Installing the CPU........................................................................................... 11
1-4 Installing the Memory...................................................................................... 11
1-5 Installing an Expansion Card.......................................................................... 12
1-6 Back Panel Connectors................................................................................... 12
1-7 Internal Connectors......................................................................................... 15
Chapter 2 BIOS Setup...................................................................................................23

2-1 Startup Screen................................................................................................ 23
2-2 The Main Menu............................................................................................... 24
2-3 Favorites (F11)................................................................................................ 25
2-4 Tweaker........................................................................................................... 26
2-5 Settings........................................................................................................... 29
2-6 System Info..................................................................................................... 34
2-7 Boot................................................................................................................. 35
2-8 Save & Exit...................................................................................................... 38
Chapter 3 Appendix.......................................................................................................39
3-1 Configuring a RAID Set................................................................................... 39
3-2 Drivers Installation........................................................................................... 41
Regulatory Notices..................................................................................................... 42
Contact Us................................................................................................................. 48
-3-
B550 AORUS PRO (AC) Motherboard Layout
SYS_FAN1
ATX_12V CPU_OPT LED_C2
CPU_FAN
USB20 D_LED2
M2_WIFI (Note)
USB 2.0 Hub

USB_HDMI
ATX
U32_1 Socket AM4
B550 AORUS PRO (AC)

QFLED
QFLASH_PLUS
U32_2
SYS_FAN5_PUMP
U32G2C
U32G2_LAN
SYS_FAN2
Realtek®
EC_TEMP1
2.5GbE LAN
AUDIO
M_BIOS
SYS_FAN4
110 80 60 42
M2A_CPU
LED_CPU
PCIEX16
DDR4_A1
DDR4_A2
DDR4_B1
DDR4_B2
CPU DRAM
VGA BOOT
PCIEX1_1
BAT
AMD B550
80 60
THB_C
110 42
M2B_SB
PCIEX4
CODEC
4 2 0
SATA3 5 3 1
PCIEX1_2
iTE®
PCIEX2 USB 2.0 Hub Super I/O
F_AUDIO CLR_CMOS
D_LED1
LED_C1 F_USB2 SYS_FAN3 F_U32 F_PANEL

EC_TEMP2 F_USB1 SYS_FAN6_PUMP TPM
Box Contents
55 B550 AORUS PRO AC or B550 AORUS PRO motherboard
55 Motherboard driver disc 55 Four SATA cables
55 User's Manual 55 One G Connector
55 Quick Installation Guide 55 One antenna (Note)
55 One RGB LED strip extension cable 55 Two Velcro cable ties
* The box contents above are for reference only and the actual items shall depend on the product package you obtain.
The box contents are subject to change without notice.
(Note) Only for the B550 AORUS PRO AC.
-4-
B550 AORUS PRO (AC) Motherboard Block Diagram
PCI Express 4.0/3.0 Bus CPU CLK+/- (100~500 MHz)

x16
1 M.2 Socket 3 DDR4 3200/2933/2667/2400/2133 MHz

1 PCI Express x16
(M2A_CPU)
HDMI AMD Socket

AM4 CPU
SPI
BIOS
Bus
3 USB 3.2 Gen 1
TPM
LPC
1 USB 3.2 Gen 2
Bus iTE®
Type A
Super I/O
PCIe 3.0 x4
CODEC
1 USB Type-C™, with

USB 3.2 Gen 2 support
Rear Speaker Out
Center/Subwoofer
Speaker Out
MIC
Line Out
Line In
S/PDIF Out
1 USB 3.2 Gen 2

Type A
2 USB 3.2 Gen 1

AMD B550
4 SATA 6Gb/s 2 USB 2.0/1.1

(SATA3 0~3)
USB 2.0
Hub 8 USB 2.0/1.1
PCI Express 3.0 Bus PCI Express 3.0 Bus

x1 x2 x1 x4 x1
Switch Realtek ®
Switch M.2 WIFI
2 PCI Express x1
2.5GbE LAN Module (Note)

1 PCI Express x4
1 PCI Express x2
or or
RJ45
(PCIEX4)
(PCIEX2)
2 SATA 6Gb/s LAN 1 M.2 Socket 3

(SATA3 4/5) (M2B_SB)
-5-
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
•• Prior to installation, make sure the chassis is suitable for the motherboard.
•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•• When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•• When handling the motherboard, avoid touching any metal leads or connectors.
•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keep your hands dry and first touch a metal object to eliminate static electricity.
•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•• Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
•• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•• Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•• Do not place the computer system on an uneven surface.
•• Do not place the computer system in a high-temperature or wet environment.
•• Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certified computer technician.
•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation
and/or grounding instructions.
-6-
1-2 Product Specifications
CPU AMD Socket AM4, support for:
AMD Ryzen™ 5000 series processors/
3rd Generation AMD Ryzen™ processors/
3rd Generation AMD Ryzen™ with Radeon™ Graphics processors
(Go to GIGABYTE's website for the latest CPU support list.)
Chipset AMD B550
Memory 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)
of system memory
Support for DDR4 3200/2933/2667/2400/2133 MHz memory modules
Dual channel memory architecture
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard Integrated in the 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors:
Graphics - 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.1 version, HDCP 2.3, and HDR.
Maximum shared memory of 16 GB
Audio Realtek® ALC1220-VB codec
* The back panel line out jack supports DSD audio.
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
LAN Realtek® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)
Wireless Wi-Fi module
Communication - WIFI 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
Module (Note) - BLUETOOTH 4.2
- Support for 11ac wireless standard and up to 433 Mbps data rate
* Actual data rate may vary depending on environment and equipment.
Expansion Slots 1 x PCI Express x16 slot (PCIEX16), integrated in the CPU:
- AMD Ryzen™ 5000 series processors/3rd Generation AMD Ryzen ™
processors support PCIe 4.0 x16 mode
- 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support
PCIe 3.0 x16 mode
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot (PCIEX4), integrated in the Chipset:
- Supporting PCIe 3.0 x4 mode
* The M2B_SB connector shares bandwidth with the PCIEX4 slot. The PCIEX4 slot
will become unavailable when an SSD is installed in the M2B_SB connectors.
1 x PCI Express x16 slot (PCIEX2), integrated in the Chipset:
- Supporting PCIe 3.0 x2 mode
* The PCIEX2 slot shares bandwidth with the SATA3 4, 5 connectors. The PCIEX2
slot will become unavailable when a device is installed in the SATA3 4 or SATA3 5
connector.
2 x PCI Express x1 slots

-7-
Storage Interface 1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3,
M key, type 2242/2260/2280/22110 SSDs:
- AMD Ryzen™ 5000 series processors/3rd Generation AMD Ryzen ™
processors support SATA and PCIe 4.0 x4/x2 SSDs
- 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support
SATA and PCIe 3.0 x4/x2 SSDs
1 x M.2 connector (M2B_SB), integrated in the Chipset, supporting Socket 3,
M key, type 2242/2260/2280/22110 SSDs:
- support PCIe 3.0 x4/x2 SSDs
6 x SATA 6Gb/s connectors, integrated in the Chipset:
- Support for RAID 0, RAID 1, and RAID 10
USB CPU:
- 3 x USB 3.2 Gen 1 ports on the back panel
- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
Chipset:
- 1 x USB Type-C™ port on the back panel, with USB 3.2 Gen 2 support
- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
- 2 x USB 3.2 Gen 1 ports available through the internal USB header
- 2 x USB 2.0/1.1 ports on the back panel
Chipset+2 USB 2.0 Hubs:
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Connectors 1 x 8-pin ATX 12V power connector
2 x M.2 Socket 3 connectors
6 x SATA 6Gb/s connectors
1 x CPU fan header
1 x water cooling CPU fan header
4 x system fan headers
2 x system fan/water cooling pump headers
1 x CPU cooler LED strip/RGB LED strip header
2 x addressable LED strip headers
2 x RGB LED strip headers
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x Thunderbolt™ add-in card connector
2 x temperature sensor headers
1 x Clear CMOS jumper
-8-
Back Panel 1 x HDMI port
Connectors 2 x SMA antenna connectors (1T1R) (Note)
3 x USB 3.2 Gen 1 ports
1 x USB Type-C™ port, with USB 3.2 Gen 2 support
2 x USB 3.2 Gen 2 Type-A ports (red)
6 x USB 2.0/1.1 ports
1 x Q-Flash Plus button
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks
I/O Controller iTE® I/O Controller Chip
Hardware Voltage detection
Monitor Temperature detection
Fan speed detection
Water cooling flow rate detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
BIOS 1 x 256 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported
functions of each application may also vary depending on motherboard specifications.
- @BIOS
- EasyTune
- Fast Boot
- Game Boost
- ON/OFF Charge
- RGB Fusion
- Smart Backup
- System Information Viewer
Support for Q-Flash Plus
Support for Q-Flash
Support for Xpress Install

-9-
Bundled Norton® Internet Security (OEM version)
Software XSplit Gamecaster + Broadcaster (12 months license)
Realtek® 8125 Gaming LAN Bandwidth Control Utility
Operating
Support for Windows 10 64-bit
System
Form Factor ATX Form Factor; 30.5cm x 24.4cm
* GIGABYTE reserves the right to make any changes to the product specifications and product-related information without
prior notice.
B550 AORUS PRO AC B550 AORUS PRO
Please visit GIGABYTE's website for support lists of CPU, memory

modules, SSDs, and M.2 devices.
Please visit the Support\Utility List page on GIGABYTE's website to download the latest
version of apps.
- 10 -
1-3 Installing the CPU
Read the following guidelines before you begin to install the CPU:
•• Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.
•• Apply an even and thin layer of thermal grease on the surface of the CPU.
•• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•• Set the CPU host frequency in accordance with the CPU specifications. It is not recommended
that the system bus frequency be set beyond hardware specifications since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU, graphics
card, memory, hard drive, etc.
Installing the CPU
Completely lift up the CPU socket locking lever. Locate the pin one (denoted by a small triangle) of the CPU
socket and the CPU. Once the CPU is positioned into its socket, place one finger down on the middle of the
CPU, lowering the locking lever and latching it into the fully locked position.
A Small Triangle
Marking Denotes Pin A Small Triangle
AM4 Socket Marking Denotes CPU AM4 CPU
One of the Socket
Pin One
1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:
•• Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•• Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•• Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory
is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual
Channel memory mode will double the original memory bandwidth.
The four memory sockets are divided into two channels and each channel has two memory sockets as following:

Channel A: DDR4_A1, DDR4_A2

Channel B: DDR4_B1, DDR4_B2
Please visit GIGABYTE's website for details on hardware installation.
- 11 -
Recommanded Dual Channel Memory Configuration:
DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2
2 Modules -- DS/SS -- DS/SS
4 Modules DS/SS DS/SS DS/SS DS/SS
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory
of the same capacity, brand, speed, and chips be used.
1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:
•• Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•• Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
1-6 Back Panel Connectors

(Note 1)
USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
SMA Antenna Connectors (1T1R) (Note 1)
Use this connector to connect an antenna.
Tighten the antennas to the antenna connectors and then aim the antennas correctly for better
signal reception.
HDMI Port (Note 2)

The HDMI port is HDCP 2.3 compliant and supports Dolby TrueHD and DTS HD
Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel LPCM
audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported
resolution is 4096x2160@60 Hz, but the actual resolutions supported are dependent on the monitor being
used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
•• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
- 12 -
USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices.
USB 3.2 Gen 1 Port (Q-Flash Plus Port)
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices. Before using Q-Flash Plus (Note 3), make sure to insert the
USB flash drive into this port first.
Q-Flash Plus Button (Note 3)
Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest
BIOS on a USB thumb drive and plug it into the Q-Flash Plus port, and then you can now flash the BIOS
automatically by simply pressing the Q-Flash Plus button. The QFLED will flash when the BIOS matching
and flashing activities start and will stop flashing when the BIOS flashing is complete.
USB 3.2 Gen 2 Type-A Port (Red)
The USB 3.2 Gen 2 Type-A port supports the USB 3.2 Gen 2 specification and is compatible to the USB
3.2 Gen 1 and USB 2.0 specification. Use this port for USB devices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/ Connection/Speed LED: Activity LED:
Speed LED Activity LED
State Description State Description
Orange 2.5 Gbps data rate Blinking Data transmission or receiving is occurring
Green 1 Gbps data rate Off No data transmission or receiving is occurring
Off 100 Mbps data rate
LAN Port
USB Type-C™ Port

The reversible USB port supports the USB 3.2 Gen 2 specification and is compatible to the USB 3.2 Gen 1
and USB 2.0 specification. Use this port for USB devices.
Center/Subwoofer Speaker Out
Use this audio jack to connect center/subwoofer speakers.
Rear Speaker Out
Use this audio jack to connect rear speakers.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Line In/Side Speaker Out
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out
The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended
that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).
Mic In/Side Speaker Out
The Mic in jack.
(Note 1) Only for the B550 AORUS PRO AC.

(Note 2) For 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors only.
(Note 3) To enable the Q-Flash Plus function please visit the "Unique Features" webpage of GIGABYTE's
website.
- 13 -
Audio Jack Configurations:
Headphone/
Jack 4-channel 5.1-channel 7.1-channel
2-channel
Center/Subwoofer Speaker
a a
Out
Rear Speaker Out a a a
Line In/Side Speaker Out a
Line Out/Front Speaker Out a a a a
Mic In/Side Speaker Out a
If you want to install a Side Speaker, you need to retask either the Line in or Mic in jack to be
Side Speaker out through the audio driver.
Please visit GIGABYTE's website for details on configuring the audio software.
- 14 -
1-7 Internal Connectors
4 1 6 3 9
10
5
4
7 8
12
19 20
19
12
11
18
14
9 10 8 16 4 5 15 17 13
1) ATX_12V 12) M2A_CPU/M2B_SB

2) ATX 13) F_PANEL
3) CPU_FAN 14) F_AUDIO
4) SYS_FAN1/2/3/4 15) F_U32
5) SYS_FAN5_PUMP/SYS_FAN6_PUMP 16) F_USB1/F_USB2
6) CPU_OPT 17) TPM
7) LED_CPU 18) CLR_CMOS
8) EC_TEMP1/EC_TEMP2 19) BAT
9) D_LED1/D_LED2 20) CPU/DRAM/VGA/BOOT
10) LED_C1/LED_C2 21) THB_C
11) SATA3 0/1/2/3/4/5
Read the following guidelines before connecting external devices:

•• First make sure your devices are compliant with the connectors you wish to connect.
•• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
•• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
- 15 -
1/2) ATX_12V/ATX (2x4 12V Power Connectors and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
on the motherboard. Before connecting the power connector, first make sure the power supply is turned
off and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
ATX_12V:
Pin No. Definition Pin No. Definition
5 8 1 GND (Only for 2x4-pin 12V) 5 +12V (Only for 2x4-pin 12V)
1 4 2 GND (Only for 2x4-pin 12V) 6 +12V (Only for 2x4-pin 12V)
ATX_12V 3 GND 7 +12V
4 GND 8 +12V
ATX:
12 24 Pin No. Definition Pin No. Definition

1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON (soft On/Off)
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 NC
9 5VSB (stand by +5V) 21 +5V
10 +12V 22 +5V
11 +12V (Only for 2x12-pin 23 +5V (Only for 2x12-pin ATX)
1 13 ATX)
12 3.3V (Only for 2x12-pin ATX) 24 GND (Only for 2x12-pin ATX)
ATX
3/4) CPU_FAN/SYS_FAN1/2/3/4 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is
the ground wire). The speed control function requires the use of a fan with fan speed control design. For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
Pin No. Definition
1 GND
1 1
1 2 Voltage Speed Control
CPU_FAN SYS_FAN1/2/4 SYS_FAN3 3 Sense
4 PWM Speed Control
•• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
•• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
- 16 -
5) SYS_FAN5_PUMP/SYS_FAN6_PUMP (System Fan/Water Cooling Pump Headers)
The fan/pump headers are 4-pin. Most fan headers possess a foolproof insertion design. When connecting
a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The
speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation,
it is recommended that a system fan be installed inside the chassis. The header also provides speed control
for a water cooling pump, refer to Chapter 2, "BIOS Setup," "Settings\Smart Fan 5," for more information.
Pin No. Definition

1 GND
1
1 2 Voltage Speed Control
SYS_FAN5_PUMP SYS_FAN6_PUMP 3 Sense
4 PWM Speed Control
6) CPU_OPT (Water Cooling CPU Fan Header)

The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof
insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black
connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control
design.
Pin No. Definition

1
1 GND
2 Voltage Speed Control
3 Sense
4 PWM Speed Control
•• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
•• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
7) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header)

The header can be used to connect a CPU cooler LED strip or a standard 5050 RGB LED strip (12V/G/R/B),
with maximum power rating of 2A (12V) and maximum length of 2m.
Pin No. Definition

1 12V
1 2 G
3 R
DEBUG
4 B
PORT
Connect the CPU cooler LED strip/RGB LED strip to the header. The
RGB LED
Strip
power pin (marked with a triangle on the plug) of the LED strip must
be connected to Pin 1 (12V) of this header. Incorrect connection
may lead to the damage of the LED strip.
1
12V
For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of
GIGABYTE's website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
- 17 -
_
_
_
U
F
U
8) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
_0
Connect the thermistor cables to the headers for temperature detection.
_ _
_3
3
1
Pin No. Definition
_
B
1
1 SENSOR IN
_B
S F_
EC_TEMP1 EC_TEMP2 2 GND
G.QBOFM G.QBOFM
B_
9) D_LED1/D_LED2 (Addressable LED Strip Headers)

The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating
F_USB3 F
of 5A (5V) and maximum number of 1000 LEDs.
S_
_
_ U
_ S
_
B
B
Pin No. Definition
1 1
1 V (5V)
S _
D_LED1 D_LED2
2 Data
3 No Pin
4 GND
Connect your addressable LED strip to the header. The power

F_USB30 3
B_
Addressable LED pin (marked with a triangle on the plug) of the LED strip must be
Strip
connected to Pin 1 of the addressable LED strip header. Incorrect
connection may lead to the damage of the LED strip.
S F_
1
B
F_USB3
DEBUG DEBUG
10) LED_C1/LED_C2
PORT PORT (RGB LED Strip Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
_3
rating of 2A (12V) and maximum length of 2m.

_0
_ F
_0
F
U
Pin No. Definition

F
1 1 1 12V
LED_C1 LED_C2 2 G
3 R
B_
4 B
_
Connect one end of the RGB LED strip extension cable to the header
B R G 12V
and the other end to your RGB LED strip. The black wire (marked
USB 0_ B
B R G 12V
B R G 12V
with a triangle on the plug) of the extension cable must be connected
RGB LED
B R G 12V Strip to Pin 1 (12V) of this header. The 12V pin (marked with an arrow) on
1 the other end of the extension cable must be lined up with the 12V of
12V
the LED strip. Be careful with the connection orientation of the LED
strip; incorrect connection may lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of
GIGABYTE's website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
- 18 -
B_
_
_
S B_
B
_ S S
S
S_
_
B
_ S
_ U
11) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors)
S_
__ The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
F
B
B 1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support
RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring
a RAID array.
_ UF
F_USB3
_ G.QBOFM F
G.QBOFM Pin No.
G.QBOFM Definition
B 4 2 0
SATA3 1 GND
5 3 1 _0
2 TXP
F_USB3 F 7 1 3 TXN
7 1
4 GND
_ S _ 5 RXN
_0
6 RXP
_ F 7 GND
_ S _
_ F
_0 F
12) M2A_CPU/M2B_SB (M.2 Socket 3 Connectors)

The M.2 connectors support M.2 SATA SSDs or M.2 PCIe SSDs and support RAID configuration. Please
note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M.2 SATA SSD or a SATA
hard drive. Refer to Chapter 3, "Configuring
_0 F a RAID Set," for instructions on configuring a RAID array.
M2A_CPU
110 80 60 42
M2B_SB (Note)
110 80 60 42
_3 U
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Locate the M.2 connector where you will install the M.2 SSD, use a screwdriver to unfasten the screw on
the heatsink and then remove the heatsink.
Step 2: _3 U
Locate the proper mounting hole based on the length of your M.2 SSD drive. If needed, move the standoff
to the desired mounting hole. Insert the M.2 SSD into the M.2 connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with the screw. Replace the heatsink and secure it to the
original hole. Make sure to remove the protective film from the bottom of the heatsink before replacing the heatsink.
Select the proper hole for the M.2 SSD to be installed and refasten the screw and standoff.
(Note) The M2B_SB connector shares bandwidth with the PCIEX4 slot. The PCIEX4 slot will become
unavailable when an SSD is installed in the M2B_SB connector.
- 19 -
13) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator
on the chassis to this header according to the pin assignments below. Note the positive and negative pins
before connecting the cables.
Power LED Power Switch Speaker •• PLED/PWR_LED (Power LED):
System Status LED Connects to the power status indicator
S0 On on the chassis front panel. The LED is on
PLED+
PW+
when the system is operating. The LED is

SPEAK+
SPEAK-
S3/S4/S5 Off
PLED-
off when the system is in S3/S4 sleep state

PW-
NC
NC
2 20 or powered off (S5).

1 19 •• PW (Power Switch):
Connects to the power switch on the chassis front panel. You may
configure the way to turn off your system using the power switch
HD-
CI+
RES+
PWR_LED+
PWR_LED-
PWR_LED-
(refer to Chapter 2, "BIOS Setup," "Settings\Platform Power," for more

CI-
HD+
RES-
information).
Hard Drive Reset Power LED •• SPEAK (Speaker):
Activity LED Switch
Chassis Intrusion Connects to the speaker on the chassis front panel. The system reports
Header
system startup status by issuing a beep code. One single short beep
will be heard if no problem is detected at system startup.
•• HD (Hard Drive Activity LED):
Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive
is reading or writing data.
•• RES (Reset Switch):
Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer
if the computer freezes and fails to perform a normal restart.
•• CI (Chassis Intrusion Header):
Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has
been removed. This function requires a chassis with a chassis intrusion switch/sensor.
•• NC: No connection.
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis
front panel module to this header, make sure the wire assignments and the pin assignments are
matched correctly.
14) F_AUDIO (Front Panel Audio Header)

The front panel audio header supports High Definition audio (HD). You may connect your chassis front
panel audio module to this header. Make sure the wire assignments of the module connector match the
pin assignments of the motherboard header. Incorrect connection between the module connector and the
motherboard header will make the device unable to work or even damage it.

9 1
1 MIC2_L 6 Sense S S U
U F_ F_
2 GND 7 FAUDIO_JD 5 4 3 2 1
10 2 3 MIC2_R 8 No Pin
4 NC 9 LINE2_L
5 LINE2_R 10 Sense
Some chassis provide a front panel audio module that has separated connectors on each wire
instead of a single plug. For information about connecting the front panel audio module that has
different wire assignments, please contact the chassis manufacturer.
B SS - 20 -
_
1
_S
1
1
_ B S_
B B
S S U
F_
5 4 3 2 1
G.QBOFM
B_
15) F_U32 (USB 3.2 Gen 1 Header)
The header conforms to USB 3.2 Gen 1 and USB 2.0 specification and can provide two USB ports. For
purchasing the optional 3.5" front panel that provides two USB 3.2 Gen 1 ports, please contact the local
dealer.
Pin No. Definition Pin No. Definition Pin No. Definition

1 10 1 VBUS 8 D1- 15 SSTX2-
2 SSRX1- 9 D1+ 16 GND
3 SSRX1+ 10 NC 17 SSRX2+
20 11 4 GND 11 D2+ 18 SSRX2-
F_ U 5
F_USB30
SSTX1- 12 D2- 19 VBUS
6 SSTX1+ 13 GND 20 No Pin
7 GND 14 SSTX2+
_ B S_
B B
16) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

The headers conform
S B_
to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an
optional USB bracket.
B For purchasing the optional USB bracket, please contact the local dealer.
S
S
9 1
1 Power (5V) 6 USB DY+
_ S 2 Power (5V) 7 GND
10 2 3 USB DX- 8 GND
S_
_ 4 USB DY- 9 No Pin
B 5 USB DX+ 10 NC
•• Do not_ plug
U the IEEE 1394 bracket (2x5-pin) cable into the USB 2.0/1.1 header.
•• Prior to_ installing the USB bracket, be sure to turn off your computer Fand unplug the power cord
_ _ 3
from theB power outlet to prevent damage to the USB bracket.
F_USB3 F
_0
17) TPM (Trusted Platform Module Header)
You may connect a TPM (Trusted Platform Module) to this header.
_ _B _ S _
11 1 Pin No. Definition Pin No. Definition
1 LAD0 7 LAD3
_ F
2 VCC3 8 GND
12 2 3 LAD1 9 LFRAME
4 No Pin 10 NC
5 LAD2 11 SERIRQ
6 LCLK 12 LRESET
_0 F
- 21 -
S F_
S 3 B SS S _
_ _ 3 B
F_USB3 F
S F
_
18) CLR_CMOS (Clear CMOS Jumper)

Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
_ _B _ S _
Open: Normal
B_ _
S _S
Short: Clear CMOS Values
•• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
•• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or
manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations).
19) BAT (Battery)

The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low
level, or the CMOS values may not be accurate or may be lost.
You may clear
_ the CMOS values by removing the battery:S F_
1. Turn off your computer and unplug the power cord.
2. Gently remove the battery from the battery holder and wait for one minute. (Or use a metal
object like a screwdriver to touch the positive and negative terminals of the battery holder,
making them short for 5 seconds.) B B_
3. Replace the battery.
4. Plug in the power cord and restart your computer.
•• Always turn off your computer and unplug the power cord before replacing the battery.
•• Replace the battery with an equivalent one. Damage to your devices may occur if the battery is
replaced with an incorrect model.
•• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
•• When installing the battery, note the orientation of the positive side (+) and the negative side (-)
of the battery (the positive side should face up).
•• Used batteries must be handled in accordance with local environmental regulations.
20) CPU/DRAM/VGA/BOOT (Status LEDs)

The status LEDs show whether the CPU, memory, graphics card, and operating system are working
is on, that means F_USB30
properly after system power-on. If theB_CPU/DRAM/VGA LED F_USB3 3
the corresponding device
is not working normally; if the BOOT LED is on, that means you haven't entered the operating system yet.
B_ USB 0_ B
CPU: CPU status LED
DRAM: Memory status LED
CPU DRAM VGA: Graphics card status LED
VGA BOOT BOOT: Operating system status LED
21) THB_C (Thunderbolt™ Add-in Card Connector)

The connector is used to connect to a GIGABYTE Thunderbolt™ add-in card.
USB 0_ B B_ U
B_
Supports a Thunderbolt™ add-in card.
F_USB3
- 22 -
Chapter 2 BIOS Setup
BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the
motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,
saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows
the user to modify basic system configuration settings or to activate certain system features.
When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to
keep the configuration values in the CMOS.
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.
To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.
•• Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.
•• @BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet
and updates the BIOS.
•• Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS,
it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing
may result in system malfunction.
•• It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other
unexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to
clear the CMOS values and reset the board to default values. (Refer to the "Load Optimized Defaults" section in
this chapter or introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.)
2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.
Function Keys
There are two different BIOS modes as follows and you can use the <F2> key to switch between the two modes.
Easy Mode allows users to quickly view their current system information or to make adjustments for optimum
performance. In Easy Mode, you can use your mouse to move through configuration items. The Advanced Mode
provides detailed BIOS settings. You can press the arrow keys on your keyboard to move among the items
and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.
•• When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.
•• The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.
- 23 -
2-2 The Main Menu
System
Setup Menus Time
Configuration
Items
Hardware
Information
Option Description Current Settings Quick Access Bar allows you to quickly move to
the General Help, Easy Mode, Smart Fan 5, or
Q-Flash screen.
Advanced Mode Function Keys

<f><g> Move the selection bar to select a setup menu
<h><i> Move the selection bar to select an configuration item on a menu
<Enter>/Double Click Execute command or enter a menu
<+>/<Page Up> Increase the numeric value or make changes
<->/<Page Down> Decrease the numeric value or make changes
<F1> Show descriptions of the function keys
<F2> Switch to Easy Mode
<F3> Save the current BIOS settings to a profile
<F4> Load the BIOS settings from a profile created before
<F5> Restore the previous BIOS settings for the current submenus
<F6> Display the Smart Fan 5 screen
<F7> Load the Optimized BIOS default settings for the current submenus
<F8> Access the Q-Flash utility
<F10> Save all the changes and exit the BIOS Setup program
<F11> Switch to the Favorites submenu
<F12> Capture the current screen as an image and save it to your USB drive
<Insert> Add or remove a favorite option
<Ctrl>+<S> Display information on the installed memory
<Esc> Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
- 24 -
2-3 Favorites (F11)
Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where
all of your favorite options are located. To add or remove a favorite option, go to its original page and press
<Insert> on the option. The option is marked with a star sign if set as a "favorite."
- 25 -
2-4 Tweaker
Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall
system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and we recommend you not to
alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings
may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
&& CPU Clock Control

Allows you to manually set the CPU base clock in 1 MHz increments. (Default: Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
&& Spread Spectrum Control
Enables or disables CPU/PCIe Spread Spectrum. (Default: Auto)
&& CPU Ratio Mode (Note)
Allows you to set the core ratio for all CPU cores or individual cores. (Default: All cores)
&& CCD0 CCX0/1 Ratio (Note)
Allows you to manually set the core ratio for the CPU CCX0, 1 cores. This item is configurable only when
CPU Ratio Mode is set to Per CCX. (Default: Auto)
&& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
&& GFX Clock Frequency (Note)
Allows you to alter the frequency for the GPU. After you alter the GFX Clock Frequency settings, make
sure to adjust the GFX Core Voltage settings. (Default: Auto)
NOTE: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically
configure this setting.
&& GFX Core Voltage (Note)
Allows you to alter the voltage for the GPU. (Default: Auto)
NOTE: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically
configure this setting.
(Note) This item is present only when you install a CPU that supports this feature.
- 26 -
Advanced CPU Settings
&& Core Performance Boost (Note 1)
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Auto)
&& SVM Mode
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Disabled)
&& AMD Cool&Quiet function

Enabled Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)

Disabled Disables this function.
&& PPC Adjustment (Note 1)
Allows you to fix the PState of the CPU. (Default: PState 0)
&& Global C-state Control (Note 1)
Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency
will be reduced during system halt state to decrease power consumption. (Default: Auto)
&& Power Supply Idle Control (Note 1)
Enables or disables Package C6 State.

Typical Current Idle Disables this function.

Low Current Idle Enables this function.

Auto Lets the BIOS automatically configure this setting. (Default)
&& CCD Control (Note 1)
Sets the number of CCDs to be used. (Default: Auto)
&& Downcore Control
Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).
(Default: Auto)
&& SMT Mode
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. (Default: Auto)
&& CPPC (Note 1)
Enables or disables the CPPC feature. (Default: Auto)
&& CPPC Preferred Cores (Note 1)
Enables or disables the CPPC Preferred Cores feature. (Default: Auto)
&& Extreme Memory Profile (X.M.P.) (Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.

Disabled Disables this function. (Default)

Profile1 Uses Profile 1 settings.

Profile2 (Note 2)
Uses Profile 2 settings.
&& XMP High Frequency Support (Note 2)
Allows you to select the compatibility level for high-frequency memory. This item is configurable only when
Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2. (Default: Auto)
&& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
- 27 -
Advanced Memory Settings
Memory Subtimings
dd Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
Drive Strength, Data Bus Configuration
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
SPD Info
Displays information on the installed memory.
&& C
PU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU VDD18/
CPU VDDP/A_VDD18S5/DRAM Voltage (CH A/B)/DDRVPP Voltage (CH A/B)/DRAM
Termination (CH A/B)
These items allow you to adjust the CPU Vcore and memory voltages.
CPU/VRM Settings
This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, over-current
protection level, and PWM phases.
- 28 -
2-5 Settings
Platform Power
&& AC BACK
Determines the state of the system after the return of power from an AC power loss.

Memory The system returns to its last known awake state upon the return of the AC power.

Always On The system is turned on upon the return of the AC power.

Always Off The system stays off upon the return of the AC power. (Default)
&& ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the Resume by Alarm function becomes unavailable.
&& Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically configure this
setting. (Default: Auto)
&& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:

Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
&& Wake on LAN
Enables or disables the wake on LAN function. (Default: Enabled)
&& High Precision Event Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
&& CEC 2019 Ready
Allows you to select whether to allow the system to adjust power consumption when it is in shutdown, idle,
or standby state in order to comply with the CEC (California Energy Commission) 2019 Standards. (Default:
Disabled)
- 29 -
IO Ports
&& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.

IGD Video (Note) Sets the onboard graphics as the first display.

PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default)

PCIe 2 Slot Sets the graphics card on the PCIEX4 slot as the first display.

PCIe 3 Slot Sets the graphics card on the PCIEX2 slot as the first display.
&& Integrated Graphics (Note)
Enables or disables the onboard graphics function.

Auto The BIOS will automatically enable or disable the onboard graphics depending
on the graphics card being installed. (Default)

Forces Enables the onboard graphics.

Disabled Disables the onboard graphics.
&& UMA Mode (Note)
Specify the UMA mode.

Auto Lets the BIOS automatically configure this setting. (Default)

UMA Specified Sets the UMA Frame Buffer Size.

UMA Auto Sets the display resolution.

UMA Game Optimized Adjusts the frame buffer size based on the total system memory size.
This item is configurable only when Integrated Graphics is set to Forces.
&& UMA Frame Buffer Size (Note)
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 64M~2G.
This item is configurable only when UMA Mode is set to UMA Specified.
&& Display Resolution (Note)
Allows you to set the display resolution. Options are: Auto (default), 1920x1080 and below, 2560x1600,
3840x2160.
This item is configurable only when UMA Mode is set to UMA Auto.
&& HD Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
&& PCIEX16 Bifurcation
Allows you to determine how the bandwidth of the PCIEX16 slot is divided. Options: Auto, PCIE 2x8,
PCIE 1x8/2x4, PCIE 2x4/1x8. (Default: Auto)
&& Above 4G Decoding
Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and
their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)
&& Onboard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
- 30 -
USB Configuration
&& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
&& USB Mass Storage Driver Support
Enables or disables support for USB storage devices. (Default: Enabled)
&& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
&& Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
SATA Configuration
&& SATA Mode
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.

RAID Enables RAID for the SATA controller.

AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&& NVMe RAID mode
Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled)
&& Chipset SATA Port Enable
Enables or disables the integrated SATA controllers. (Default: Enabled)
&& Chipset SATA Port 0/1/2/3/4/5
Displays the information of the connected SATA device(s).
Network Stack Configuration

&& Network Stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
&& IPv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled.
&& IPv4 HTTP Support
Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is
enabled.
&& IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled.
&& IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is
enabled.
- 31 -
&& PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when Network Stack is enabled. (Default: 0)
&& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack is enabled. (Default: 1)
Realtek PCIe 2.5GBE Family Controller

This sub-menu provides information on LAN configuration and related configuration options.
Miscellaneous
&& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.

Off Disables the selected lighting mode when the system is on.

On Enables the selected lighting mode when the system is on. (Default)
&& LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is configurable when LEDs in System Power On State is set to On.

Off Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)

On Enables the selected lighting mode when the system enters S3/S4/S5 state.
&& PCIe Slot Configuration
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, Gen 3, or Gen 4 (Note). Actual
operation mode is subject to the hardware specification of each slot. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
&& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
&& IOMMU
Enables or disables AMD IOMMU support. (Default: Auto)
&& AMD CPU fTPM

Enables or disables the TPM 2.0 function integrated in the AMD CPU. (Default: Disabled)
Trusted Computing
Enables or disables Trusted Platform Module (TPM).
AMD CBS
This sub-menu provides AMD CBS-related configuration options.
PC Health
&& Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Open field will
show "No" at next boot.
&& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
- 32 -
&& C
PU Vcore/CPU VDDP/CPU VDD18/DDRVtt A/B/DRAM Channel A/B Voltage/PM_CLDO12/
+3.3V/+5V/CHIPSET Core/+12V/VCORE SOC
Displays the current system voltages.
Smart Fan 5
&& Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
&& Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
(Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed in the curve graph.
Speed
Full Allows the fan to run at full speeds.
&& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control.
&& Temperature Interval
Allows you to select the temperature interval for fan speed change.
&& Fan/Pump Control mode

Auto Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal
control mode. (Default)

Voltage Voltage mode is recommended for a 3-pin fan/pump.

PWM PWM mode is recommended for a 4-pin fan/pump.
&& Fan/Pump Stop
Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature
curve. The fan or pump stops operation when the temperature is lower than the limit. (Default: Disabled)
&& Temperature
Displays the current temperature of the selected target area.
&& Fan Speed
Displays current fan/pump speeds.
&& Flow Rate
Displays the flow rate of your water cooling system.
&& Temperature Warning Control
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.
&& Fan/Pump Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
- 33 -
2-6 System Info.
This section provides information on your motherboard model and BIOS version. You can also select the default
language used by the BIOS and manually set the system time.
&& System Language

Selects the default language used by the BIOS.
&& System Date
Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch
between the Month, Date, and Year fields and use the <Page Up> or <Page Down> key to set the desired
value.
&& System Time
Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use
<Enter> to switch between the Hour, Minute, and Second fields and use the <Page Up> or <Page Down>
key to set the desired value.
&& Access Level
Displays the current access level depending on the type of password protection used. (If no password is
set, the default will display as Administrator.) The Administrator level allows you to make changes to all
BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
Plug in Devices Info

Displays information on your SATA, PCI Express, and M.2 devices if installed.
Q-Flash
Allows you to access the Q-Flash utility to update the BIOS or back up the current BIOS configuration.
- 34 -
2-7 Boot
&& Boot Option Priorities

Specifies the overall boot order from the available devices. Removable storage devices that support GPT
format will be prefixed with "UEFI:" string on the boot device list. To boot from an operating system that
supports GPT partitioning, select the device prefixed with "UEFI:" string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,
select the optical drive that contains the Windows 10 64-bit installation disc and is prefixed with "UEFI:"
string.
&& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
&& Security Option
Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.
After configuring this item, set the password(s) under the Administrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup program.
(Default)
&& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
&& Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup
speed. (Default: Disabled)
&& SATA Support

Last Boot SATA Devices Only Except for the previous boot drive, all SATA devices are disabled
before the OS boot process completes. (Default)
SATA Devices All SATA devices are functional in the operating system and during the POST.
All
This item is configurable only when Fast Boot is set to Enabled or Ultra Fast.
&& NVMe Support
Allows you to enable or disable NVMe device(s). (Default: Enabled)
- 35 -
&& VGA Support
Allows you to select which type of operating system to boot.

Auto Enables legacy option ROM only.
Driver
EFI Enables EFI option ROM. (Default)
&& USB Support

Disabled All USB devices are disabled before the OS boot process completes.
Initial All USB devices are functional in the operating system and during the POST.
Full
(Default)

Partial Initial Part of the USB devices are disabled before the OS boot process completes.
This item is configurable only when Fast Boot is set to Enabled. This function is disabled when Fast Boot
is set to Ultra Fast.
&& NetWork Stack Driver Support

Disabled Disables booting from the network. (Default)

Enabled Enables booting from the network.
&& CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Disabled Disables UEFI CSM and supports UEFI BIOS boot process only.

Enabled Enables UEFI CSM. (Default)
&& LAN PXE Boot Option ROM
Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)
This item is configurable only when CSM Support is set to Enabled.
&& Storage Boot Option Control
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only. (Default)

Legacy Only Enables legacy option ROM only.
&& Other PCI Device ROM Priority
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only. (Default)

Legacy Only Enables legacy option ROM only.
&& Administrator Password

Allows you to configure an administrator password. Press <Enter> on this item, type the password, and
then press <Enter>. You will be requested to confirm the password. Type the password again and press
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
- 36 -
&& User Password
Allows you to configure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
Secure Boot
Allows you to enable or disable Secure Boot and configure related settings. This item is configurable only
when CSM Support is set to Disabled.
&& Preferred Operating Mode

Allows you to select whether to enter Easy mode or Advanced mode after entering BIOS Setup. Auto
enters the BIOS mode where it was last time. (Default: Auto)
- 37 -
2-8 Save & Exit
&& Save & Exit Setup

Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
&& Exit Without Saving
Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.
&& Load Optimized Defaults
Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
&& Boot Override
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to confirm. Your system will restart automatically and boot from that device.
&& Save Profiles
This function allows you to save the current BIOS settings to a profile. You can create up to 8 profiles and
save as Setup Profile 1~ Setup Profile 8. Press <Enter> to complete. Or you can select Select File in
HDD/FDD/USB to save the profile to your storage device.
&& Load Profiles
If your system becomes unstable and you have loaded the BIOS default settings, you can use this function
to load the BIOS settings from a profile created before, without the hassles of reconfiguring the BIOS
settings. First select the profile you wish to load and then press <Enter> to complete. You can select Select
File in HDD/FDD/USB to input the profile previously created from your storage device or load the profile
automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked
properly (last known good record).
- 38 -
Chapter 3 Appendix
3-1 Configuring a RAID Set
RAID Levels
RAID 0 RAID 1 RAID 10
Minimum Number of
≥2 2 4
Hard Drives
Number of hard drives * Size of the smallest drive (Number of hard drives/2) *
Array Capacity
Size of the smallest drive Size of the smallest drive
Fault Tolerance No Yes Yes
Before you begin, please prepare the following items:
•• At least two SATA hard drives or SSDs. (Note) (To ensure optimal performance, it is recommended that you use
two hard drives with identical model and capacity).
•• Windows setup disc.
•• Motherboard driver disc.
•• A USB thumb drive.
Configuring the Onboard SATA Controller

A. Installing SATA hard drive(s) in your computer
Install the hard drives/SSDs in the SATA/M.2 connectors on the motherboard. Then connect the power connectors
from your power supply to the hard drives.
B. Configuring SATA controller mode in BIOS Setup

Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Steps:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Under
Settings\IO Ports, set SATA Configuration\SATA Mode to RAID. Then save the settings and restart your
computer. (If you want to use NVMe PCIe SSDs to configure RAID, make sure to set NVMe RAID mode to
Enabled.)
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
C. UEFI RAID Configuration

Steps:
1. In BIOS Setup, go to Boot and set CSM Support to Disabled. Save the changes and exit BIOS Setup.
2. After the system reboot, enter BIOS Setup again. Then enter the Settings\IO Ports\RAIDXpert2
Configuration Utility sub-menu.
3. On the RAIDXpert2 Configuration Utility screen, press <Enter> on Array Management to enter the Create
Array screen. Then, select a RAID level. RAID levels supported include RAID 0, RAID 1, and RAID 10 (the
selections available depend on the number of the hard drives being installed). Next, press <Enter> on Select
Physical Disks to enter the Select Physical Disks screen.
4. On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them
to Enabled. Next, use the down arrow key to move to Apply Changes and press <Enter>. Then return
to the previous screen and set the Select CacheTagSize, Read Cache Policy and Write Cache Policy.
5. Move to Create Array and press <Enter> to begin.
6. After completing, you'll be brought back to the Array Management screen. Under Manage Array Properties
you can see the new RAID volume and information on RAID level, array name, array capacity, etc.
(Note) An M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD or a SATA hard drive.
- 39 -
Install the RAID driver and operating system
With the correct BIOS settings, you are ready to install the operating system.
Installing the Operating System

As some operating systems already include RAID driver, you do not need to install separate RAID driver during
the Windows installation process. After the operating system is installed, we recommend that you install all
required drivers from the motherboard driver disc using "Xpress Install" to ensure system performance and
compatibility. If the operating system to be installed requires that you provide additional RAID driver during the
OS installation process, please refer to the steps below:
1. Copy the Hw10 folder under the \BootDrv folder in the driver disc to your USB thumb drive.
2. Boot from the Windows setup disc and perform standard OS installation steps. When the screen requesting
you to load the driver appears, select Browse.
3. Insert the USB thumb drive and then browse to the location of the driver. The location of the drivers is as
follows:
\Hw10\RAID\x64
4. Select AMD-RAID Bottom Device first and click Next to load the driver. Then select AMD-RAID Controller
and click Next to load the driver. Finally, continue the OS installation.
Please visit GIGABYTE's website for details on configuring a RAID array.
- 40 -
3-2 Drivers Installation
•• Before installing the drivers, first install the operating system.
•• After installing the operating system, insert the motherboard driver disc into your optical drive. Click
on the message "Tap to choose what happens with this disc" on the top-right corner of the screen
and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the
Run.exe program.)
"Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to
install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or click
the arrow icon to individually install the drivers you need.
Please visit GIGABYTE's website for more software information.
Please visit GIGABYTE's website for more troubleshooting information.
- 41 -
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information
Product Name: Motherboard
Trade Name: GIGABYTE
Model Number: B550 AORUS PRO AC/B550 AORUS PRO
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted
by FCC certified equipment. The Intel PRO/Wireless 5000 LAN products meet the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/
IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s
recommended limits.
The following safety precautions should be observed:
•• Do not touch or move antenna while the unit is transmitting or receiving.
•• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face
or eyes, while transmitting.
•• Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged.
•• Use in specific environments:
- The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
- The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
- The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
Antenna use: Caution: When using IEEE 802.11a wireless LAN, this product is restricted
In order to comply with FCC RF exposure limits, low gain integrated to indoor use due to its operation in the 5.15-to 5.25-GHz frequency
antennas should be located at a minimum distance of 7.9 inches (20 cm) range. Industry Canada requires this product to be used indoors for the
or more from the body of all persons. frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power
Explosive Device Proximity Warning radar is allocated as the primary user of the 5.25-to 5.35-GHz and 5.65 to
Warning: Do not operate a portable transmitter (such as a wireless network 5.85-GHz bands. These radar stations can cause interference with and/or
device) near unshielded blasting caps or in an explosive environment damage to this device. The maximum allowed antenna gain for use with
unless the device has been modified to be qualified for such use. this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To
Antenna Warning
comply with RF exposure requirements all antennas should be located at a
The wireless adapter is not designed for use with high-gain antennas.
minimum distance of 20cm, or the minimum separation distance allowed
Use On Aircraft Caution by the module approval, from the body of all persons.
Caution: Regulations of the FCC and FAA prohibit airborne operation of
Attention: l’utilisation d’un réseau sans fil IEEE802.11a est restreinte à
radio-frequency wireless devices because their signals could interfere with
une utilisation en intérieur à cause du fonctionnement dansla bande de
critical aircraft instruments.
fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit
Other Wireless Devices utilisé à l’intérieur des bâtiments pour la bande de fréquence 5.15-5.25
Safety Notices for Other Devices in the Wireless Network: Refer to the GHz afin de réduire les possibilités d’interférences nuisibles aux canaux
documentation supplied with wireless Ethernet adapters or other devices co-existants des systèmes de transmission satellites. Les radars de
in the wireless network. puissances ont fait l’objet d’une allocation primaire de fréquences dans
les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent
Canada, Canada-Industry Notice: créer des interférences avec ce produit et/ou lui être nuisible. Le gain
This device complies with Industry Canada license-exempt RSS d’antenne maximum permissible pour une utilisation avec ce produit est de
standard(s). Operation is subject to the following two conditions: 6 dBi afin d’être conforme aux limites de puissance isotropique rayonnée
(1) this device may not cause interference, and équivalente (P.I.R.E.) applicable.
(2) this device must accept any interference, including interference that dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement
may cause undesired operation of the device. point-à-point. Pour se conformer aux conditions d’exposition de RF toutes
les antennes devraient être localisées à une distance minimum de 20
Cet appareil est conforme aux normes Canada d’Industrie de RSS
cm, ou la distance de séparation minimum permise par l’approbation du
permis-exempt. L’utilisation est assujetti aux deux conditions suivantes: module, du corps de toutes les personnes.
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et Under Industry Canada regulations, this radio transmitter may only operate
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage using an antenna of a type and maximum (or lesser) gain approved for
susceptible de provoquer un fonctionnement indésirable. the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be chosen so that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
- 42 -
Conformément à la réglementation d'Industrie Canada, le présent émetteur European Union (EU) CE-Konformitätserklärung
radio peut fonctionner avec une antenne d'un type et d'un gain maximal Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien:
(ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/35/EU,
but de réduire les risques de brouillage radio électrique à l'intention des Funkanlagen Richtlinie 2014/53/EU, RoHS-Richtlinie 2011/65/EU erfüllt
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte und die 2015/863 Erklärung.
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas Die Konformität mit diesen Richtlinien wird unter Verwendung der
l'intensité nécessaire à l'établissement d'une communication satisfaisante. entsprechenden Standards zurEuropäischen Normierung beurteilt.
European Union (EU) CE Declaration of Conformity CE declaração de conformidade
This device complies with the following directives: Electromagnetic Este produto com a marcação CE estão em conformidade com das
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva
Radio Equipment Directive 2014/53/EU, ErP Directive 2009/125/EC, RoHS CEM 2014/30/EU; Diretiva RSP 2011/65/UE e a declaração 2015/863.
directive (recast) 2011/65/EU & the 2015/863 Statement. A conformidade com estas diretivas é veriﬁcada utilizando as normas
This product has been tested and found to comply with all essential europeias harmonizadas.
requirements of the Directives.
CE Declaración de conformidad
European Union (EU) RoHS (recast) Directive 2011/65/EU & the Este producto que llevan la marca CE cumplen con las siguientes
European Commission Delegated Directive (EU) 2015/863 Statement Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de
GIGABYTE products have not intended to add and safe from hazardous bajo voltaje 2014/35/EU, Directiva de equipamentos de rádio 2014/53/EU,
substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). Directiva RoHS 2011/65/EU y la Declaración 2015/863.
The parts and components have been carefully selected to meet RoHS El cumplimiento de estas directivas se evalúa mediante las normas
requirement. Moreover, we at GIGABYTE are continuing our efforts to europeas armonizadas.
develop products that do not use internationally banned toxic chemicals.
CE Dichiarazione di conformità
European Union (EU) Community Waste Electrical & Electronic I prodotti con il marchio CE sono conformi con una o più delle seguenti
Equipment (WEEE) Directive Statement Direttive UE, come applicabile: Direttiva EMC 2014/30/UE, Direttiva sulla
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/ bassa tensione 2014/35/UE, Direttiva di apparecchiature radio 2014/53/
EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. UE, Direttiva RoHS 2011/65/EU e Dichiarazione 2015/863.
The WEEE Directive specifies the treatment, collection, recycling and La conformità con tali direttive viene valutata utilizzando gli Standard
disposal of electric and electronic devices and their components. Under europei armonizzati applicabili.
the Directive, used equipment must be marked, collected separately, and
disposed of properly. Deklaracja zgodności UE Unii Europejskiej
Urządzenie jest zgodne z następującymi dyrektywami: Dyrektywa
WEEE Symbol Statement kompatybilności elektromagnetycznej 2014/30/UE, Dyrektywa
The symbol shown below is on the product or on its niskonapięciowej 2014/35/UE, Dyrektywa urządzeń radiowych 2014/53/
packaging, which indicates that this product must not be UE, Dyrektywa RoHS 2011/65/UE i dyrektywa2015/863.
disposed of with other waste. Instead, the device should be Niniejsze urządzenie zostało poddane testom i stwierdzono jego zgodność
taken to the waste collection centers for activation of the z wymaganiami dyrektywy.
treatment, collection, recycling and disposal procedure.
ES Prohlášení o shodě
For more information about where you can drop off your waste equipment Toto zařízení splňuje požadavky Směrnice o Elektromagnetické
for recycling, please contact your local government office, your household kompatibilitě 2014/30/EU, Směrnice o Nízkém napětí 2014/35/EU,
waste disposal service or where you purchased the product for details of Směrnice o rádiových zařízeních 2014/53/EU, Směrnice RoHS 2011/65/
environmentally safe recycling. EU a 2015/863.
Tento produkt byl testován a bylo shledáno, že splňuje všechny základní
End of Life Directives-Recycling požadavky směrnic.
The symbol shown below is on the product or on its packaging,
which indicates that this product must not be disposed of with EK megfelelőségi nyilatkozata
other waste. Instead, the device should be taken to the waste A termék megfelelnek az alábbi irányelvek és szabványok
collection centers for activation of the treatment, collection, követelményeinek, azok a kiállításidőpontjában érvényes, aktuális
recycling and disposal procedure. változatában: EMC irányelv 2014/30/EU, Kisfeszültségű villamos
berendezésekre vonatkozó irányelv 2014/35/EU, rádióberendezések
Déclaration de Conformité aux Directives de l’Union européenne (UE) irányelv 2014/53/EU, RoHS irányelv 2011/65/EU és 2015/863.
Cet appareil portant la marque CE est conforme aux directives de l’UE
suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive Δήλωση συμμόρφωσης ΕΕ
Basse Tension 2014/35/UE, directive équipements radioélectriques Είναι σε συμμόρφωση με τις διατάξεις των παρακάτω Οδηγιών
2014/53/UE, la directive RoHS II 2011/65/UE & la déclaration 2015/863. της Ευρωπαϊκής Κοινότητας: Οδηγία 2014/30/ΕΕ σχετικά με την
La conformité à ces directives est évaluée sur la base des normes ηλεκτρομαγνητική συμβατότητα, Οοδηγία χαμηλή τάση 2014/35/EU,
européennes harmonisées applicables. Οδηγία 2014/53/ΕΕ σε ραδιοεξοπλισμό, Οδηγία RoHS 2011/65/ΕΕ
και 2015/863.
Η συμμόρφωση με αυτές τις οδηγίες αξιολογείται χρησιμοποιώντας τα
ισχύοντα εναρμονισμένα ευρωπαϊκά πρότυπα.
European Community RED Directive Compliance Statement:

This equipment complies with all the requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
This equipment is suitable for home and office use in all the European Community Member States and EFTA Member States.
The low band 5.15 -5.35 GHz is for indoor use only.
AT BE BG CH CY CZ DE
DK EE EL ES FI FR HR
HU IE IS IT LI LT LU
LV MT NL PL PT RO SE
SI SK TR UK
- 43 -
Taiwan NCC Wireless Statements / 無線設備警告聲明：
低功率電波輻射性電機管理辦法
第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原
設計之特性及功能。
第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干
擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
Korea KCC NCC Wireless Statement:
5,25GHz - 5,35 GHz 대역을 사용하는 무선 장치는 실내에서만 사용하도록 제한됩니다。
Japan Wireless Statement:
5.15 GHz 帯 ~ 5.35 GHz 帯: 屋内のみの使用。
Wireless module country approvals:

To identify your Motherboard version or revision number, look for "REV: X.X" printed on the PCB on the top left corner of the Motherboard. For
example, "REV:1.0" means the revision of the motherboard is 1.0. .
Motherboard revision no.: Wireless module manufacturer, model name:
B550 AORUS PRO AC rev. 1.0 Intel® Corporation 3168NGW
B550 AORUS PRO AC rev. 1.1 Intel® Corporation 9260NGW
B550 AORUS PRO AC rev. 1.2 Realtek Corporation RTL8822CE
Country approvals for wireless module 3168NGW:
Country approvals for wireless module 9260NGW:
Country approvals for wireless module RTL8822CE:
- 44 -
- 45 -
- 46 -
- 47 -
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.

Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com
WEB address (English): https://www.gigabyte.com
WEB address (Chinese): https://www.gigabyte.com/tw
•• GIGABYTE eSupport
To submit a technical or non-technical (Sales/Marketing) question, please link to:
https://esupport.gigabyte.com
- 48 -

MB Manual B550-Aorus-Pro Ac 1201 210325 e

Uploaded by

Copyright:

Available Formats

MB Manual B550-Aorus-Pro Ac 1201 210325 e

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MB Manual B550-Aorus-Pro Ac 1201 210325 e

Uploaded by

Copyright:

Available Formats

B550 AORUS PRO AC

B550 AORUS PRO

B550 AORUS PRO AC B550 AORUS PRO

For more product details, please visit GIGABYTE's website.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

Chapter 1 Hardware Installation......................................................................................6

Chapter 2 BIOS Setup...................................................................................................23

USB 2.0 Hub

B550 AORUS PRO (AC)

LED_C1 F_USB2 SYS_FAN3 F_U32 F_PANEL

(Note) Only for the B550 AORUS PRO AC.

PCI Express 4.0/3.0 Bus CPU CLK+/- (100~500 MHz)

1 M.2 Socket 3 DDR4 3200/2933/2667/2400/2133 MHz

HDMI AMD Socket

1 USB Type-C™, with

1 USB 3.2 Gen 2

2 USB 3.2 Gen 1

4 SATA 6Gb/s 2 USB 2.0/1.1

PCI Express 3.0 Bus PCI Express 3.0 Bus

2.5GbE LAN Module (Note)

2 SATA 6Gb/s LAN 1 M.2 Socket 3

(Note) Only for the B550 AORUS PRO AC.

(Note) Only for the B550 AORUS PRO AC.

(Note) Only for the B550 AORUS PRO AC.

B550 AORUS PRO AC B550 AORUS PRO

Please visit GIGABYTE's website for support lists of CPU, memory

1-4 Installing the Memory

Please visit GIGABYTE's website for details on hardware installation.

1-5 Installing an Expansion Card

1-6 Back Panel Connectors

USB 2.0/1.1 Port

HDMI Port (Note 2)

USB Type-C™ Port

(Note 1) Only for the B550 AORUS PRO AC.

1) ATX_12V 12) M2A_CPU/M2B_SB

Read the following guidelines before connecting external devices:

12 24 Pin No. Definition Pin No. Definition

3/4) CPU_FAN/SYS_FAN1/2/3/4 (Fan Headers)

Pin No. Definition

6) CPU_OPT (Water Cooling CPU Fan Header)

Pin No. Definition

7) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header)

Pin No. Definition

Connect the thermistor cables to the headers for temperature detection.

9) D_LED1/D_LED2 (Addressable LED Strip Headers)

Connect your addressable LED strip to the header. The power

rating of 2A (12V) and maximum length of 2m.

Pin No. Definition

12) M2A_CPU/M2B_SB (M.2 Socket 3 Connectors)

when the system is operating. The LED is

off when the system is in S3/S4 sleep state

2 20 or powered off (S5).

(refer to Chapter 2, "BIOS Setup," "Settings\Platform Power," for more

14) F_AUDIO (Front Panel Audio Header)

Pin No. Definition Pin No. Definition

Pin No. Definition Pin No. Definition Pin No. Definition

16) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

18) CLR_CMOS (Clear CMOS Jumper)

Network Stack Configuration

Realtek PCIe 2.5GBE Family Controller

Plug in Devices Info