Scribd
Upload
24 views2 pages

TechSupportGuide-USB Virtual COM Driver-Installation

This document provides instructions for installing a USB virtual COM driver in Windows operating systems. It outlines 5 steps to connect the device, run the driver installer executable, check that the driver is not installed, click install, and verify the driver is installed by checking the device manager.

Uploaded by

Jimmy Berdum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views2 pages

TechSupportGuide-USB Virtual COM Driver-Installation

This document provides instructions for installing a USB virtual COM driver in Windows operating systems. It outlines 5 steps to connect the device, run the driver installer executable, check that the driver is not installed, click install, and verify the driver is installed by checking the device manager.

Uploaded by

Jimmy Berdum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Support Instructional Guide:

How to Install the USB Virtual COM Driver in


Windows XP, 7, 8, 8.1, and 10



Step 1:
Connect the pcProx® CDC device to the USB port. The reader will display a yellow flashing
LED.




Step 2:
Navigate to the location of the saved executable file and run RFIDeas-AK0-Driver.exe

Step 3:
The device driver status on the RF IDeas AK0 Driver Installer should display:

Checking driver status… Not installed.

Click the Install button.

















Step 4:
Once installed, the reader will beep and display a solid red LED. The device driver status on the
RF IDeas AK0 Driver Installer will now display:

Checking driver status… Installed.

Step 5:
Open the Device Manager (Go to Control Panel, Hardware, and Device Manager) and locate
the reader under COM PORTS. (Right Click port, properties, Manufacturer RF IDeas)

If you require additional assistance, please contact our Technical Support team by phone at
(847) 870-1723 or through email at [email protected].

You might also like