Scribd
Upload
11 views

Assignment - 04

This document contains an assignment cover sheet for a course on equipment maintenance. It provides instructions for Assignment 4, which requires students to: 1) Write the dismantling procedure for their assigned equipment 2) Provide the troubleshooting sequence for seal leakage in their equipment 3) Explain the reasons for main drive shaft bearing failure in their equipment 4) Include an exploded view drawing of their assigned equipment 5) Make a list of all bearings, seals, and couplings (if any) in their equipment The last digit of the student's ID number determines which type of equipment they are assigned to write about, such as a centrifugal pump or axial compressor.

Uploaded by

khans
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
11 views

Assignment - 04

This document contains an assignment cover sheet for a course on equipment maintenance. It provides instructions for Assignment 4, which requires students to: 1) Write the dismantling procedure for their assigned equipment 2) Provide the troubleshooting sequence for seal leakage in their equipment 3) Explain the reasons for main drive shaft bearing failure in their equipment 4) Include an exploded view drawing of their assigned equipment 5) Make a list of all bearings, seals, and couplings (if any) in their equipment The last digit of the student's ID number determines which type of equipment they are assigned to write about, such as a centrifugal pump or axial compressor.

Uploaded by

khans
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Yanbu Industrial College

Department of Mechanical Engineering Technology

Assignment Cover Sheet

Assignment Assignment
Course code Program Title (Bachelor/Diploma)
Number Due Date
MET/MCET
04 Mechanical Maintenance
213
Course Name Lecturer/ Marker’s Name
EQUIPMENT MAINTENANCE
Mohammad Ajmal

This statement should be completed and signed by the student work in preparation of the
assignment.

Declaration and Statement of Authorship:


1. I hold a copy of this assignment, which can be produced if the original is lost/ damaged.
2. This assignment is my original work and no part of it has been copied from any other student’s work or from
any other source except where due acknowledgment is made.
3. No part of this assignment has been written for me by any other person except where such collaboration has
been authorised by the lecturer/teacher concerned and is clearly acknowledged in the assignment.
4. I have not previously submitted or currently submitting this work for any other course.
5. This work may be reproduced and/or communicated for the purpose of detecting plagiarism.
6. I give permission for a copy of my marked work to be retained by the College for review by external
examiners.
7. I understand that plagiarism is the presentation of the work, idea or creation of another person as though it is
your own. It is a form of cheating and is a very serious academic offence that may lead to expulsion from the
College. Plagiarised material can be drawn from, and presented in, written, graphic and visual form, including
electronic data, and oral presentations. Plagiarism occurs when the origin of the material used is not
appropriately cited.
8. Enabling plagiarism is the act of assisting or allowing another person to plagiarise or to copy your work.

Student Submission
Student Name ID Section
Signature Date

Lecturer/ Marker’s Name And Comments Grade Course Learning Outcomes (CLO’s)

MET Department Reviewed 22 Sep 2016


Assignment 4:

Answer the following for the equipment assigned to you as noted below
1- Write the dismantling procedure
2- Troubleshooting sequence of seal leakage
3- Reasons of main drive shaft bearings failure
4- Paste the exploded view of your equipment drawing
5- Make list and types of the following in your equipment
a. All Bearings
b. All Seals
c. All Couplings (if any)

NOTE:
Your equipment will be according to the last digit of your ID (for example if your ID: 3810291
your equipment will be Single stage centrifugal pump, and if your ID: 3820350 your
equipment will be Multistage axial compressor)

1. Single stage centrifugal pump


2. Multistage centrifugal pump
3. External Gear pump
4. Internal Gear Pump
5. Plunger Pump
6. Sliding vane pump
7. Double stage piston compressor
8. Twin screw compressor
9. Lobe compressor
10. Multistage axial compressor

You might also like