Rip Routing

Configuring RIP:

Router#conf t

Router(config)#router rip

Router(config-router)#network <own net address>

Router(config-router)#network <own net address>

Router(config-router)#exit

EIGRP Routing

Configuration of EIGRP:

Router(config)#router eigrp<as no>

Router(config-router)#network <net addr.>

Router(config-router)#network <net addr.>

Router(config-router)#exit

Configuring EIGRP:

On Router 0:

Router#config t

Router(config)#int f 0/0

Router(config)#ip address 10.0.0.1 255.0.0.0

Router(config)#no shutdown

Router(config)#intser 0/0/0

Router(config)#ip add 11.0.0.1 255.0.0.0

Router(config)#no shut

Router(config)#intser 0/0/1

Router(config)#ip add 23.0.0.2 255.0.0.0

Router(config)#no shut

Router(config)#intser 0/1/0

Router(config)#ip add 192.168.10.210 0.255.255.255

Router(config)#no shut

Router(config)#intser 0/0/1

Router(config)#ip add 12.0.0.1 255.0.0.0

Router(config)#no shut

Router(config)#do write

Router(config)#router eigrp 10

Router(config-router)#network 10.0.0.0 0.255.255.255

Router(config-router)#network 11.0.0.0 0.255.255.255

Router(config-router)#network 12.0.0.0 0.255.255.255

Router(config-router)#network 23.0.0.0 0.255.255.255

Router(config-router)#network 192.168.10.208 0.0.0.15

Router(config-router)#exit

Router(config)#do write

Router(config)#exit

Router#shorunnig-config

Router#showip protocols

Router#show interface brief

Router#showip protocols

Routing Protocol is "eigrp10 "

Outgoing update filter list for all interfaces is not set

Incoming update filter list for all interfaces is not set

Default networks flagged in outgoing updates

Default networks accepted from incoming updates

EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0

EIGRP maximum hopcount 100

EIGRP maximum metric variance 1

Redistributing: eigrp 10

Automatic network summarization is in effect

Automatic address summarization:

192.168.10.0/24 for FastEthernet0/0, Serial0/0/1, Serial0/0/0, Serial0/1/1

Summarizing with metric 2169856

Maximum path: 4

Routing for Networks:

192.168.10.0

12.0.0.0

11.0.0.0

23.0.0.0

10.0.0.0

Routing Information Sources:

Gateway Distance Last Update

23.0.0.1 90 6522

11.0.0.2 90 8684

192.168.10.209 90 8736

12.0.0.2 90 9112

Router#showip interface brief

Interface IP-Address OK? Method StatusProtocol
FastEthernet0/0 10.0.0.1 YES manual upup
FastEthernet0/0.1 unassignedYES unset up up
FastEthernet0/1 unassigned YES unset administratively down down
Serial0/0/0 11.0.0.1 YES manual up up
Serial0/0/1 23.0.0.2YES manual up up
Serial0/1/0 192.168.10.210 YES manual up up
Serial0/1/1 12.0.0.1 YES manual up up
Serial0/2/0 unassigned YES unset administratively down down
Serial0/2/1 unassigned YES unset administratively down Serial0/3/1unassigned YES
unset administratively down

OSPF Routing

Configuring OSPF:

Router#conf t

Router(config)#router ospf<process no>

Router(config-router)#network <net address><wild mask> area <area id>

Router(config-router)#network <net address><wild mask> area <area id>

Router(config-router)#do write

Router(config-router)#exit

Virtual local area network

Using commands:

Router 6:

Router(config)#intf 0/0

Router(config)#ip add 15.0.0.1 255.0.0.0

Router(config)#no shut

Router(config)#intser 0/3/0

Router(config)#ip add 14.0.0.2 255.0.0.0

Router(config)#no shutdown

Router(config)#intser 0/0/0

Router(config)#ipadd 22.0.0.2 255.0.0.0

Router(config)#no shutdown

Router(config)#router eigrp 10
 Router(config)#network 15.0.0.0 0.255.255.255

Router(config)#network 14.0.0.0 0.255.255.255

Router(config)#network 22.0.0.0 0.255.255.255

Router(config)#do write

Router(config)#intf 0/0.1 (Sub interface)

Router(config)#encapsulation dot1q 10

Router(config)#ip address 75.0.0.101 255.0.0.0

Router(config)#do write

Router(config)#intf 0/0.2 (Sub interface)

Router(config)#encapsulation dot1q 20

Router(config)#ip address 76.0.0.101 255.0.0.0

Router(config)#do write

Creating VLAN’s:

Switch#config t

Switch(config)#vlan 10

Switch(config)#name LAB1

Switch(config)#vlan 20

Switch(config)#name LAB2

Switch(config)#interface rangefastethernet 0/2 -7

Switch(config)#switchport access vlan 10

Switch(config)#do write

Switch(config)#exit

Switch#shovlan

VPN network

Using Commands:
On Router9:
Router>enable
Router#config t
Router(config)#interface f 0/0
Router(config-if)#ip address 25.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#interface ser 0/1/0
Router(config-if)#ip address 22.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#router eigrp 10
Router(config-router)#network 22.0.0.0 0.255.255.255
Router(config-router)#do write
Router(config-router)#exit
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 66.0.0.0
Router(config-router)#network 25.0.0.0
Router(config-router)#do write
Router(config-router)#exit
Router(config)#do show running-config
Router(config)#exit
Router#showip protocols
Router#show interface brief
Router(config)#interface tunnel 10
Router(config)#ip address 66.0.0.1 255.0.0.0
Router(config)#Tunnel destination 23.0.0.1
Router(config)#do write
Router(config)#exit
On Router 10:
Router#confg t
Router(config)#
Router(config)#interface f 0/0
Router(config-if)#ip address 24.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#interface ser 0/1/0
Router(config-if)#ip address 23.0.0.1 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#router eigrp 10
Router(config-router)#network 23.0.0.0 0.255.255.255
Router(config-router)#do write
Router(config-router)#exit
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 66.0.0.0
Router(config-router)#network 24.0.0.0
Router(config-router)#do write
Router(config-router)#exit
Router(config)#do show running-config
Router(config)#exit
Router#showip protocols
 Router#show interface brief
Router(config)#interface tunnel 10
Router(config)#ip address 66.0.0.2 255.0.0.0
Router(config)#Tunnel destination 22.0.0.1
Router(config)#do write
Router(config)#exit

NAT

Configuration of overload NAT:

1700C

Router>enable

Router#configuration terminal

Router(config)#hostname 1700C

1700C(config)#interface Fast Ethernet 0/0

1700C(config-if)#ip address 13.0.0.1 255.0.0.0

1700C(config-if)#no shutdown

1700C(config)#interface Serial 0/1/0

1700C(config-if)#ip address 11.0.0.2 255.0.0.0

1700C(config-if)#no shutdown

1700C(config-if)#exit

1700C(config)#access-list 10 permit 13.0.0.1 0.255.255.25

1700C(config)#ipnat pool abc 11.0.0.3 11.0.0.3 netmask 255.0.0.0

1700C(config)#ipnat inside source list 10 pool abc overload

1700C(config)#interface F0/0

1700C(config-if)#ipnat inside

1700C(config-if)#interface S0/1/0

1700C(config-if)#ipnat outside
 Accsess Lists

Standard access lists Configuration:

1700A

Router>enable

Router#configuration terminal

Router(config)#hostname 1700A

1700A(config)#line vty 0 5

1700A(config-line)#password 5555

1700A(config-line)#enble secret

1700A(config-line)#login

1700A(config-line)#exit

1700A(config)#interface Fast Ethernet 0/0

1700A(config-if)#ip address 16.0.0.1 255.0.0.0

1700A(config-if)#no shutdown

1700A(config)#interface Serial 0/0/1

1700A(config-if)#ip address 14.0.0.1. 255.0.0.0

1700A(config-if)#no shutdown

1700A(config)#router eigrp 10

1700A(config-router)#network 16.0.0.0 0.255.255.255

1700A(config-router)#network 24.0.0.0 0.255.255.255

1700A(config-router)#control Z

1700A#show ip route

1700A#show ip interface brief

1700A#show ip protocol

1700A(config)#access-list 10 deny 76.0.0.101 0.0.0.0 (standard access-list range 1-99)

1700A(config)#access-list 10 permit any (access to telnet others IP)

 1700A(config)#line vty 0 5 (inform to telnet)

1700A(config-line)#access-class 10 in (enble)

1700A(config-line)#no access-class 10 in (disable)

1700A(config-line)#control Z

1700A#show ip access-list

1700B

Router>enable

Router#configuration terminal

Router(config)#hostname 1700B

1700B(config)#interface Fast Ethernet 0/0

1700B(config-if)#ip address 15.0.0.1 255.0.0.0

1700B(config-if)#no shutdown

1700B(config)#interface Serial 0/3/0

1700B(config-if)#ip address 14.0.0.2 255.0.0.0

1700B(config-if)#no shutdown

1700B(config)#router eigrp 10

1700B(config-router)#network14.0.0.0 0.255.255.255

1700B(config-router)#network 15.0.0.0 0.255.255.255

1700B(config-router)#control Z

1700B#show ip route

1700B#show ip interface brief

1700B#showip protocol.

Vitual trunking protocol

USING COMMANDS:

On Server Switch:

Switch>enable

Switch#config t
 Switch(config)#vtp domain hcl.com

Switch(config)#vtp password abc

Switch(config)#vtp mode server

Switch(config)#vlan 10

Switch(config)#name LAB1

Switch(config)#vlan 20

Switch(config)#name LAB2

Switch(config)#do write

Switch(config)#exit

Switch(config)#intf 0/2

Switch(config)#switchport mode trunk

Switch(config)#intf 0/6

Switch(config)#switchport mode trunk

Switch(config)#intf 0/7

Switch(config)#switchport mode trunk

Switch#showvlan

Switch#showvtp password

Switch#showvtp status

VTP Version : 2
Configuration Revision : 2
Maximum VLANs supported locally : 255
Number of existing VLANs : 7
VTP Operating Mode : Server
VTP Domain Name : hcl.com
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled

On Client switch:

Switch>enable

Switch#config t

Switch(config)#vtp domain hcl.com

 Switch(config)#vtp password abc

Switch(config)#vtp mode client

Switch(config)#vlan 10

Switch(config)#name LAB1

Switch(config)#do write

Switch(config)#exit

Switch#showvlan

Switch#showvtp status

Switch#showvtp password

On Client Switch:

Switch>enable

Switch#config t

Switch(config)#vtp domain hcl.com

Switch(config)#vtp password abc

Switch(config)#vtp mode client

Switch(config)#vlan 20

Switch(config)#name LAB2

Switch(config)#do write

Switch(config)#exit

Switch#showvlan

Switch#showvtp status

Switch#showvtp password

Voice over internet protocol

Configuration commands:

On Router 1700B:

1700B>

1700B>enable
 1700B#config terminal

1700B(config)#ipdhcp pool voip2

1700B(config)#network 15.0.0.0 255.0.0.0

1700B(config)#default-router 15.0.0.1

1700B(config)#option 1500 ip 15.0.0.1

1700B(config)#dns-server 192.168.10.198

1700B(config)#exit

1700B(config)#telephony-service

1700B(config)#Auto-assign 1 to 5

1700B(config)#max-dn 5

1700B(config)#max-ephones 5

1700B(config)#Ip source-address 15.0.0.1 port 2000

1700B(config)#ephone-dn 1

1700B(config)#number 1000

1700B(config)#dial-peer voice 2 voip

1700B(config)#session target ipv4:12.0.0.1

1700B(config)#destination-pattern 100

1700B#show running-config