Hofmann Malcon4 en 01

MALCON4/4E Electronic Control System
and Documentation Unit
MALCON4/4E is a multi-purpose device, The operation is self-

consisting of: explanatory on a graphically
brilliant, clearly arranged display.
• Line-gap electronic for
- manual, MALCON4/4E offers to execute
- semi-automatic and country-specific marking mode
- fully automatic roadmarking up to 3 parallel applied lines
applications automatically.
• Control unit for material quantity
• Documentation unit Documentation and control of
current delivery rate of metering
with the following possibilities: pumps for:
• 1-component cold paints in
• call upon a multitude of marking low presure (Airspray) and
programmes high-pressure (Airless) method
• to check constantly accuracy of executed • sprayable 2-component cold
MALCON4/4E
markings plastics
• to document the accumulated data • 2-component cold lastics
(bellow pump)
ia USB • sprayable thermoplastics
software v
mplete (bellow pump) incl. temperature
e of co
Updat display
Options:
Availability of standard software in 20
• rear view camera
languages, easily commutable
• MultiDotLine® control
• feedback system
HOFMANN. Benchmark in Quality | Innovation | Product Variety | Services | Consulting
HOFMANN GmbH • Industriestrasse 22 • 25462 Rellingen • Germany

( +49 4101 3027-0 • v +49 4101 31022 • [email protected] • www.hofmannmarking.de
MALCON4/4E Electronic Control System
and Documentation Unit
Technical Data
Adjustment of line-space cycles You can activate or deactivate You have the possibility to enter By entering line width and spe-
of different line beginnings and spray guns during the marking the number of measurements cific weight of marking material
endings as well as continuous operation*. within e.g. 250 m by yourself in the current spray thickness (in
lines are possible. order to create an analysis of µm and g/m²) is displayed and
You can generate profiled the line thickness of the marked can be controlled continuously.
You can change between pro- markings in extruder mode, road (according german regu-
grammes during the marking e. g. „Spotflex®“. lation). Realization of simulation pro-
operation, whereby the current cess (functional test at stand-
line-space cycle must be termi- Graphical presentation of revo- Compliment with regional still).
nated before starting the new lution of extruder or indication requirements demanding self-
programme. of liter at machines equipped supervision of the marking
with pump (Airless and Air- operation can be met by record-
A recognition system for direc- spray). ing of ambient and road surface
tion of travel ensures that temperature, relative humidity
whenever the programme Indication and printout of line and use of additives.
step is located inside a space lengths in gaps and continuous
between lines, you can manoeu- line lengths.
vre the machine at random
without worry. This means If a second parallel running
that you can always be sure of programme (e.g. to execute a
resuming your marking opera- drain pipe for rain on the mark-
tion at the correct point. ing during marking operation)
is requested, also this is possi-
Large memory capacity with ble with the MALCON4/4E. This
memory space (24 programmes) means you can mark 2 differ-
for line combinations as well as ent line-gap combinations, with
100 programmes for control of pre-marking system even 3, but
MultiDotLine® application. then only with MALCON4E.
* Line begin for the activated spray gun and line end for the deactivated spray gun run synchronously.
Data export via PDA, USB

flash drive or even GPS/GSM
(localization via GPS and data
transfer via GSM) module is
possible, in order to prepare
marking or line width proofs.
Display showing Spotflex® mode
Important information at a
glance. Documentation of
marked routes and pump
performance (option) as well as
control of line thickness (during
pump operation).
Subject to technical changes and errors !
Control of up to 4 marking The electronic control system offers three marking options
units arranged in series like e.g.
guns and bead guns or extruder Manual roadmarking:
flaps. The operator determines for how long and with which spray guns
the marking operation is carried out.
Semi-Automatic roadmarking:
The operator determines with which spray guns and at which point
the marking operation is to begin. The operation is terminated after
reaching the programmed line length.
02/2019
Fully automatic roadmarking:

The machine carries out the marking operation automatically in
accordance with the programme the operator has entered.
Adjustment of selectable line In addition, the execution of advance warning line ranges (e.g.
and cycle lengths via Joysticks. before crossing hilltops) can be controlled fully automatically.
Display showing universal pump mode

Hofmann Malcon4 en 01

Uploaded by

Copyright:

Available Formats

Hofmann Malcon4 en 01

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hofmann Malcon4 en 01

Uploaded by

Copyright:

Available Formats

MALCON4/4E Electronic Control System

and Documentation Unit

MALCON4/4E is a multi-purpose device, The operation is self-

HOFMANN. Benchmark in Quality | Innovation | Product Variety | Services | Consulting

HOFMANN GmbH • Industriestrasse 22 • 25462 Rellingen • Germany

Data export via PDA, USB

Display showing Spotflex® mode

Fully automatic roadmarking:

You might also like